e-shop Sapro BENDR SK

AB-FÓRUM - Satelitné fórum (Satelity, DVB-T, DVB-C)

Česko-Slovenské diskusní fórum nejen o satelitním příjmu televizních programů.
Právě je 19.Listopad 2019 - 12:44

Všechny časy jsou v UTC+01:00


Pravidla fóra


Do sekce DOWNLOAD nepatří žádné dotazy.
Máme tady i sekci na diskutování.
Dotaz bude přesunut nebo smazán bez upozornění !!!



Poslat nové téma  Odpovědět do tématu  [ 16 příspěvků ] 
Autor Zpráva
 Předmět příspěvku: Golden Media Spark Triplex - Image
PříspěvekOdeslal: 02.Září 2012 - 22:11 
Offline
Expert fóra
Expert fóra
Avatar uživatele

Registrován: 21.Leden 2010 - 10:08
Příspěvky: 845
satelitni prijimac: Golden Media UNI-BOX 9060 CRCI
GOLDEN MEDIA SPARK TRIPLEX

PKT GM Triplex NEBULA v2 image

Enigma2 OpenSource SH4 Duckbox Project GIT-44XX PKT SVN-1757 NEBULA v2 Image
gm7162_GIT-4415_PKT-1756_stm24-p0207.tar.gz (09/2012)

Support receiver : Golden Media Triplex

Kernel stm24-207

Added by sh4 Duckbox Team:

- update pngquant version 1.1
- [p191] clear all buffers on demux error
- Fix SCART output for stx7111 chips
- [E2] fix for largefile Support
- [player2_191] reset TSM when tsm is in idle mode
- update jfsutils version 1.1.15
- update libungif version 4.1.4
- [e2proc] adding more compatibility for 3dmode
- [player_191] ufs910 fix ca recording bug (camrouting)
- [e2proc] new entry hdmi/output allowing switchin output on off by proc
- fix ffmpeg patch
- add vfd scrolling to hs7810a
- [autofs] update to version 4.1.4 supporting ghost mode
- [stmfb_102] fix hdmi hotplug error
- Add dual frontends for ADB_BOX
- [palyer191] add pcm delay support
- [HS7110] optimize st-merger
- update busybox 1.20.2
- update ffmpeg 0.11.1
- [starci] rework module detection handling
- [ufs9xx_cic] rework module detection handling
- [cimax] rework module detection handling

Added by PKT:

[ALL] refresh channel list without restart GUI
[ALL] add support oscam as card server
[ALL] add startup to standby function in BP->System->Standby Tools
[ALL] add new Infocenter screen
[ALL] EPG recovery fix
[ALL] NIM selection adjust for 3 positions
[ALL] added support for mini VFD in progress
[GM7162] mini VFD configuration data for startup
[gm7162] main loop:
+ clear vfd in deepstandby
+ support vfd & led settings in standby
+ fix extinguishing
[ALL] fix lightUp
[GM7162] added FP plugin settings support
[ALL] Graph MultiEPG - added searching of picons on /hdd/picon
[GM7162] set the turn off power led when starts from deep standby
[ALL] KeyMapper extensions for red & yellow key
[ALL] fix NES on startup when LNB not connected
[ALL] fix preserve spaces in text of startup from standby mode
[ALL] fix possibility of NES in startup of radio channel
[GM7162] fix setting power led in TV mode
[ALL] fix GS in instant record sometimes appears if TIMER conflicts
[ALL] added subtitles support to Media Player - TXT files with time stamp & frame stamp.
[ALL] MediaPlayer added SRT txt format , added txt speed regulation up/down key, and many more changes.
[ALL] MediaPlayer: added in srt files detection uft8 format and other fixes
[ALL] MediaPlayer:
+ fix playlist playing
+ fix FPS detection
+ fix text delay
+ added adjustment of text speed
+ fix text startup synchro
[ALL] AudioSelection screen fix - sometimes on 1st start of AudioSelection, the screen contained only empty lines.
[E2] remove SimpleBitrate
[ALL] added new skin PKT Red-HD
[ALL] added EPG key support for MultiEPG
[ALL] SD skin replace by PKT_BasicHD
[ALL] set default skin to PKTRedHD
[ALL] update WebInterface v1.7.1
[GM7162] Volume +/- key functionality fix
[SF918G+/SF1008SE+] fix time set in deep standby mode
[GM7162] added 3rd tuner detection
[ALL] force reboot for 7162 ( also 990 & ipboxes but not tested )
[ALL] added paths list preserve for RecPaths
[UFS910] remove SU2 fix
[ALL] added oscam logs info in InfoCenter - required disabled authorization to http and access to local host
[ALL] Add HDMI CEC on/off, default OFF, work only with SF1028/SF1008+/SF918+/UFS912
[ADB] fix twin-tuner
[UFS912] add support for mtd5 - now all flash space is using
[ALL] fix missing lib for grab
[ADB] Add BSKA fan support
[ALL] fix TTX

FTP login: root, passwd: pkteam
oscam -> boxtype ipbox
mgcamd -> boxtype 11

known issues:

- second tuner DVB-S2 not working
- signal strength not working

http://www.ulozto.cz/x8WpBjz/gm7162-git-4415-pkt-1756-stm24-p0207-tar-gz


Přílohy:
ImagePreview.aspx.jpg
ImagePreview.aspx.jpg [ 37.72 KiB | Zobrazeno 48256 x ]

_________________
* Golden Media UNI-BOX 9060 CRCI HD PVR * FW. GM UNIBOX 300 sp 1.4.99 * Skylink (Ice - Irdeto)* LNB GI - 207 Platinum X 0,2 dB * Ofset. 85 cm Al *


Naposledy upravil(a) Oggy23 dne 05.Září 2012 - 18:36, celkem upraveno 1 x.
Nahoru
   
 Předmět příspěvku: Re: Golden Media Spark Triplex - Image
PříspěvekOdeslal: 02.Září 2012 - 23:16 
Offline
Expert fóra
Expert fóra
Avatar uživatele

Registrován: 21.Leden 2010 - 10:08
Příspěvky: 845
satelitni prijimac: Golden Media UNI-BOX 9060 CRCI
GOLDEN MEDIA SPARK 990 RELOADED

Image
spark7111_golden_1.2.54_app (08/2012)

http://www.ulozto.cz/xkqHQGA/spark7111-golden-1-2-54-app-rar


Přílohy:
ImagePreview.aspx.jpg
ImagePreview.aspx.jpg [ 25 KiB | Zobrazeno 48249 x ]

_________________
* Golden Media UNI-BOX 9060 CRCI HD PVR * FW. GM UNIBOX 300 sp 1.4.99 * Skylink (Ice - Irdeto)* LNB GI - 207 Platinum X 0,2 dB * Ofset. 85 cm Al *


Naposledy upravil(a) Oggy23 dne 03.Září 2012 - 12:58, celkem upraveno 1 x.
Nahoru
   
 Předmět příspěvku: Re: Golden Media Spark Triplex - Image
PříspěvekOdeslal: 03.Září 2012 - 12:53 
Offline
Expert fóra
Expert fóra
Avatar uživatele

Registrován: 21.Leden 2010 - 10:08
Příspěvky: 845
satelitni prijimac: Golden Media UNI-BOX 9060 CRCI
GOLDEN MEDIA SPARK TRIPLEX - RESCUE

TRIPLEX_1.2.41_rescue_img (07/2012)

Jak reanimować system Spark?

Przy użyciu USB:

Na początku najpierw należy przeprowadzić procedurę bootowania z systemu Spark.
Gdy po zakończeniu procedury dekoderer się zrestartuje i na wyświetlaczu pojawi się [BOOT] wyłączamy dekoder z sieci.

Na sformatowany dysk lub pendrive (FAT32) przenieś katalog : spark (zawiera 2 pliki reanimacyjne: mImage, userfsub.img).
Podłącz dysk lub pendrive do USB

Następnie włączamy go ponownie do sieci z wciśniętym przyciskiem [OK] na panelu przednim.
Po około 5sek. na wyświetlaczu pojawi się [FORC], zwalniamy przycisk [OK] i wciskamy na panelu czołowym [V+]
Po chwili na wyświetlaczu powinien pojawić się migajacy napis [U LD] po czym powinien zmienić się na [SUCC]
Dekoder powinien się sam zrestartować i uruchomić system Spark

Jeśli napis na wyświetlaczu nie zmienił się na [U LD] lub pokazał się [7-70] zmień pendrive lub hdd na inny.

Przy Użyciu serwera TFTP (tylko dla Windows XP)

Ściągnąć i zainstalować w komputerze program Cisco TFTP Server

Włączyć tuner, ustawić bootowanie na system Spark, wyłączyć tuner z sieci

Podłączyc tuner do sieci lokalnej LAN.

Zmienić adres IP komputera na 192.168.40.19 (Start->Połącz z->Pokaż wszystkie połączenia->Połączenie lokalne->Właściwości->Protokół Internetowy TCP/IP->Właściwości)

Wypakować do dowolnego folderu w PC pliki reanimacyjne

Otworzyć program TFTP,View->Options

W otwartym oknie ODZNACZYĆ obie opcje u góry, w dolnej linijce (jedynej aktywnej) wskazać folder PC gdzie znajduja sie wypakowane pliki reanimacyjne, nacisnąć OK

Włączyć tuner do sieci trzymając klaiwsz OK, po pojawieniu sie "Forc" na wyświetlaczu puścic OK, wcisnąć klawisz strzałka w prawo

Po ok 2 minutach w oknie progreamu pojawi się komunikat o wgraniu plików.

Plik można także pobrać poprzez klienta FTP ze strony Golden Media:

Adres: 195.244.27.37
Login: v91-spark
Hasło: gmspark
-----------------------------------------------------------------------------------------

(Přeloženo Google překladačem)

Jak oživit systému Spark?

Použití USB:

Na začátku postupu by měla být provedena první natažení z Spark.
Když je proces dokončen dekoderer se restartuje a na displeji se zobrazí [BOOT] zakázání síťového dekodér.

Pro formátovaný disk nebo flash disk (FAT32) přesunutí adresáře: zapalovací (obsahuje 2 soubory resuscitaci: mImage, userfsub.img).
Připojte disk nebo USB flash disk do

Pak jej opět zapněte do sítě stisknutí [OK] na předním panelu.
Po asi 5 sec. Na displeji se objeví [FORCE], zpráva [OK] a stiskněte přední panel [V +]
Po chvíli by se na displeji objeví blikající [U LD] a pak by se měl změnit na [succ]
Dekodér by měl zapne a bootovat Spark

Pokud se na displeji se nezměnil [U LD] nebo ukázal [7-70] pro změnu flash disk nebo HDD na jiný.

Použití TFTP server (pro Windows XP)

Stáhnout a nainstalovat na vašem Cisco TFTP serveru

Zapněte tuner, nastavte zavádění systému zažehnout sítě tuner

Připojte přijímač k síti LAN.

Změna IP adresu počítače, na 192.168.40.19 (Start-> Připojení k> Zobrazit všechna připojení-> Local Area Connection-> Vlastnosti-> Internet Protocol TCP/IP-> Vlastnosti)

Rozbalit do libovolné složky ve vašem PC resuscitaci soubory

Otevřete TFTP, Zobrazit-> Možnosti

V okně, které se otevře, zrušte zaškrtnutí obou možností v horní části, spodní řádek (pouze aktivní) uveďte PC složku, kde jsou rozbalené soubory umístěné resuscitaci, stiskněte OK

Zapněte přijímač do sítě holdingu klaiwsz OK, po objevení "síly" na displeji pustit OK, stiskněte šipku vpravo

Po asi 2 minut v progreamu se objeví na nahrávání souborů.

Můžete si také stáhnout soubor pomocí FTP klienta Media Golden:

Adresa: 195.244.27.37
Uživatelské jméno: V91-spark
Heslo: gmspark

http://www.ulozto.cz/xPxJTjz/triplex-1-2-41-rescue-img-rar

_________________
* Golden Media UNI-BOX 9060 CRCI HD PVR * FW. GM UNIBOX 300 sp 1.4.99 * Skylink (Ice - Irdeto)* LNB GI - 207 Platinum X 0,2 dB * Ofset. 85 cm Al *


Nahoru
   
 Předmět příspěvku: Re: Golden Media Spark Triplex - Image
PříspěvekOdeslal: 03.Září 2012 - 13:49 
Offline
Expert fóra
Expert fóra
Avatar uživatele

Registrován: 21.Leden 2010 - 10:08
Příspěvky: 845
satelitni prijimac: Golden Media UNI-BOX 9060 CRCI
GOLDEN MEDIA SPARK 990 RELOADED - RESCUE

Golden Media 990 Spark Reloaded 1.2.09 RESCUE

Jak reanimować system Spark?

Przy użyciu USB:

Na początku najpierw należy przeprowadzić procedurę bootowania z systemu Spark.
Gdy po zakończeniu procedury dekoderer się zrestartuje i na wyświetlaczu pojawi się [BOOT] wyłączamy dekoder z sieci.

Na sformatowany dysk lub pendrive (FAT32) przenieś katalog : spark (zawiera 2 pliki reanimacyjne: mImage, userfsub.img).
Podłącz dysk lub pendrive do USB

Następnie włączamy go ponownie do sieci z wciśniętym przyciskiem [OK] na panelu przednim.
Po około 5sek. na wyświetlaczu pojawi się [FORC], zwalniamy przycisk [OK] i wciskamy na panelu czołowym [V+]
Po chwili na wyświetlaczu powinien pojawić się migajacy napis [U LD] po czym powinien zmienić się na [SUCC]
Dekoder powinien się sam zrestartować i uruchomić system Spark

Jeśli napis na wyświetlaczu nie zmienił się na [U LD] lub pokazał się [7-70] zmień pendrive lub hdd na inny.

Przy Użyciu serwera TFTP (tylko dla Windows XP)

Ściągnąć i zainstalować w komputerze program Cisco TFTP Server

Włączyć tuner, ustawić bootowanie na system Spark, wyłączyć tuner z sieci

Podłączyc tuner do sieci lokalnej LAN.

Zmienić adres IP komputera na 192.168.40.19 (Start->Połącz z->Pokaż wszystkie połączenia->Połączenie lokalne->Właściwości->Protokół Internetowy TCP/IP->Właściwości)

Wypakować do dowolnego folderu w PC pliki reanimacyjne

Otworzyć program TFTP,View->Options

W otwartym oknie ODZNACZYĆ obie opcje u góry, w dolnej linijce (jedynej aktywnej) wskazać folder PC gdzie znajduja sie wypakowane pliki reanimacyjne, nacisnąć OK

Włączyć tuner do sieci trzymając klaiwsz OK, po pojawieniu sie "Forc" na wyświetlaczu puścic OK, wcisnąć klawisz strzałka w prawo

Po ok 2 minutach w oknie progreamu pojawi się komunikat o wgraniu plików.

Plik można także pobrać poprzez klienta FTP ze strony Golden Media:

Adres: 195.244.27.37
Login: v91-spark
Hasło: gmspark
-----------------------------------------------------------------------------------------

(Přeloženo Google překladačem)

Jak oživit systému Spark?

Použití USB:

Na začátku postupu by měla být provedena první natažení z Spark.
Když je proces dokončen dekoderer se restartuje a na displeji se zobrazí [BOOT] zakázání síťového dekodér.

Pro formátovaný disk nebo flash disk (FAT32) přesunutí adresáře: zapalovací (obsahuje 2 soubory resuscitaci: mImage, userfsub.img).
Připojte disk nebo USB flash disk do

Pak jej opět zapněte do sítě stisknutí [OK] na předním panelu.
Po asi 5 sec. Na displeji se objeví [FORCE], zpráva [OK] a stiskněte přední panel [V +]
Po chvíli by se na displeji objeví blikající [U LD] a pak by se měl změnit na [succ]
Dekodér by měl zapne a bootovat Spark

Pokud se na displeji se nezměnil [U LD] nebo ukázal [7-70] pro změnu flash disk nebo HDD na jiný.

Použití TFTP server (pro Windows XP)

Stáhnout a nainstalovat na vašem Cisco TFTP serveru

Zapněte tuner, nastavte zavádění systému zažehnout sítě tuner

Připojte přijímač k síti LAN.

Změna IP adresu počítače, na 192.168.40.19 (Start-> Připojení k> Zobrazit všechna připojení-> Local Area Connection-> Vlastnosti-> Internet Protocol TCP/IP-> Vlastnosti)

Rozbalit do libovolné složky ve vašem PC resuscitaci soubory

Otevřete TFTP, Zobrazit-> Možnosti

V okně, které se otevře, zrušte zaškrtnutí obou možností v horní části, spodní řádek (pouze aktivní) uveďte PC složku, kde jsou rozbalené soubory umístěné resuscitaci, stiskněte OK

Zapněte přijímač do sítě holdingu klaiwsz OK, po objevení "síly" na displeji pustit OK, stiskněte šipku vpravo

Po asi 2 minut v progreamu se objeví na nahrávání souborů.

Můžete si také stáhnout soubor pomocí FTP klienta Media Golden:

Adresa: 195.244.27.37
Uživatelské jméno: V91-gmspark
Heslo: gmspark

http://www.ulozto.cz/xuaVTjz/golden-media-990-spark-reloaded-1-2-09-rescue-zip

_________________
* Golden Media UNI-BOX 9060 CRCI HD PVR * FW. GM UNIBOX 300 sp 1.4.99 * Skylink (Ice - Irdeto)* LNB GI - 207 Platinum X 0,2 dB * Ofset. 85 cm Al *


Nahoru
   
 Předmět příspěvku: Re: Golden Media Spark Triplex - Image
PříspěvekOdeslal: 05.Září 2012 - 18:40 
Offline
Expert fóra
Expert fóra
Avatar uživatele

Registrován: 21.Leden 2010 - 10:08
Příspěvky: 845
satelitni prijimac: Golden Media UNI-BOX 9060 CRCI
GOLDEN MEDIA SPARK TRIPLEX

Enigma2 OpenSource SH4 Duckbox Project GIT-44XX PKT SVN-1757 NEBULA v2 Image
GM7162 GIT-4423 PKT-1767 stm24-p0207 (09/2012)

v2a - fix 3rd tuner

- speedup movement on channels list selection
- Emu Manager 1.0.8
- emu info GS fix for mbox
- picons fix on channels list located on /hdd, /usb
- picons update

Support receiver: Golden Media Triplex
Kernel stm24-207

FTP login: root, passwd: pkteam
oscam -> boxtype ipbox
mgcamd -> boxtype 11

http://www.ulozto.cz/x1cdVjt/gm7162-git-4423-pkt-1767-stm24-p0207-zip

_________________
* Golden Media UNI-BOX 9060 CRCI HD PVR * FW. GM UNIBOX 300 sp 1.4.99 * Skylink (Ice - Irdeto)* LNB GI - 207 Platinum X 0,2 dB * Ofset. 85 cm Al *


Nahoru
   
 Předmět příspěvku: Re: Golden Media Spark Triplex - Image
PříspěvekOdeslal: 05.Září 2012 - 20:06 
Offline
Expert fóra
Expert fóra
Avatar uživatele

Registrován: 21.Leden 2010 - 10:08
Příspěvky: 845
satelitni prijimac: Golden Media UNI-BOX 9060 CRCI
GOLDEN MEDIA SPARK TRIPLEX

First ProtoPlex for GM Triplex
EOS-Team present
ProtoPlex V1
(based on open Pli)

What is it coming up with?

- full Tuner Support (both DVB-S2 and also DVB-T/C working)
- EOS-Panel
- WebIf ver. 1.7.1
- Videowizard on v.format
- WLAN Support (Drivers tested: rt3070, rt5370, rtl8187, 8712u;
untested but integrated: rt73, zd1201, zd1211)
- RC-Choice: Triplex, Pingu RC2, GM Spark, Pingu RC1+2, Amiko Alien (untested), Default
- Receiver Display switchable
- Overclocking
- Red-LED for Deepstandby adjustable
- faster Backup (for a successful Backup a Pendrive/HDD in ext2/3 formatted and mounted to /media/sda1 is obligatory )
- Bootvolume adjustable
- Samba Support
- PEARL-USB-Display Support (already preconfigured)
- all Screenshots via WebIF are supported (Exception only HD Channels - they work only in OSD Mode)
- Webif Bouquetseditor in NF-Design
- Webif WebAdmin in NF-Design
- Sparkbackup out of E2: hereby you can realize a Backup from the original Sparksoftware
- PIP works, even with different Transponders, but will break after about 20 Seconds (because double Audio)

Key Assignement:

V-Format=Videowizard
Time=Preview for LCD-Display on TV (exit only with pushing Time again)
Find=Channelsearch
Tms=configure Recordingpath
Blue=PPanel
F1+Blue=Channelname shown in Display
F1+Yellow=Channelname off in Display
F1+Red=Reboot
F1+Green=Gui Reboot
F1+1=Mcas starting
F1+2=Oscam starting
F1+3=Mgcamd starting
F1+4=Camd3 starting
F1+5=Incubus starting
F1+6=Vizcam starting
F1+7=NewCS and Camd3 starting
F1+8=Oscam and Mgcamd starting
F1+0=All Emus Stop

Known Bugs:

- Sometimes the Box hungs up by realizing a Gui Reboot within the Menu
First Aid: F1 + Red Key (reboot)
- Scart not work yet, only HDMI

http://www.ulozto.cz/xqeZcAg/protoplexv1-rar


Přílohy:
1.jpg
1.jpg [ 17.54 KiB | Zobrazeno 48183 x ]
2.jpg
2.jpg [ 22 KiB | Zobrazeno 48183 x ]
3.png
3.png [ 354.69 KiB | Zobrazeno 48183 x ]
4.jpg
4.jpg [ 21.35 KiB | Zobrazeno 48183 x ]

_________________
* Golden Media UNI-BOX 9060 CRCI HD PVR * FW. GM UNIBOX 300 sp 1.4.99 * Skylink (Ice - Irdeto)* LNB GI - 207 Platinum X 0,2 dB * Ofset. 85 cm Al *
Nahoru
   
 Předmět příspěvku: Re: Golden Media Spark Triplex - Image
PříspěvekOdeslal: 08.Září 2012 - 12:59 
Offline
Expert fóra
Expert fóra
Avatar uživatele

Registrován: 21.Leden 2010 - 10:08
Příspěvky: 845
satelitni prijimac: Golden Media UNI-BOX 9060 CRCI
GOLDEN MEDIA SPARK 990 RELOADED

Golden Media Spark 990 Reloaded
GM990 GIT-4411 PKT-1771 stm24-p0211.zip

Enigma2 OpenSource SH4 Duckbox Project GIT-44XX PKT SVN-1771 NEBULA v2 Image

Support receiver: Golden Media 990
Kernel stm24-211

Added by sh4 Duckbox Team:

- update pngquant version 1.1
- [p191] clear all buffers on demux error
- Fix SCART output for stx7111 chips
- [E2] fix for largefile Support
- [player2_191] reset TSM when tsm is in idle mode
- update jfsutils version 1.1.15
- update libungif version 4.1.4
- [e2proc] adding more compatibility for 3dmode
- [player_191] ufs910 fix ca recording bug (camrouting)
- [e2proc] new entry hdmi/output allowing switchin output on off by proc
- fix ffmpeg patch
- add vfd scrolling to hs7810a
- [autofs] update to version 4.1.4 supporting ghost mode
- [stmfb_102] fix hdmi hotplug error
- Add dual frontends for ADB_BOX
- [palyer191] add pcm delay support
- [HS7110] optimize st-merger
- update busybox 1.20.2
- update ffmpeg 0.11.1
- [starci] rework module detection handling
- [ufs9xx_cic] rework module detection handling
- [cimax] rework module detection handling

Added by PKT:

[ALL] refresh channel list without restart GUI
[ALL] add support oscam as card server
[ALL] add startup to standby function in BP->System->Standby Tools
[ALL] add new Infocenter screen
[ALL] EPG recovery fix
[ALL] NIM selection adjust for 3 positions
[ALL] added support for mini VFD in progress
[GM7162] mini VFD configuration data for startup
[gm7162] main loop:
+ clear vfd in deepstandby
+ support vfd & led settings in standby
+ fix extinguishing
[ALL] fix lightUp
[GM7162] added FP plugin settings support
[ALL] Graph MultiEPG - added searching of picons on /hdd/picon
[GM7162] set the turn off power led when starts from deep standby
[ALL] KeyMapper extensions for red & yellow key
[ALL] fix NES on startup when LNB not connected
[ALL] fix preserve spaces in text of startup from standby mode
[ALL] fix possibility of NES in startup of radio channel
[GM7162] fix setting power led in TV mode
[ALL] fix GS in instant record sometimes appears if TIMER conflicts
[ALL] added subtitles support to Media Player - TXT files with time stamp & frame stamp.
[ALL] MediaPlayer added SRT txt format , added txt speed regulation up/down key, and many more changes.
[ALL] MediaPlayer: added in srt files detection uft8 format and other fixes
[ALL] MediaPlayer:
+ fix playlist playing
+ fix FPS detection
+ fix text delay
+ added adjustment of text speed
+ fix text startup synchro
[ALL] AudioSelection screen fix - sometimes on 1st start of AudioSelection, the screen contained only empty lines.
[E2] remove SimpleBitrate
[ALL] added new skin PKT Red-HD
[ALL] added EPG key support for MultiEPG
[ALL] SD skin replace by PKT_BasicHD
[ALL] set default skin to PKTRedHD
[ALL] update WebInterface v1.7.1
[GM7162] Volume +/- key functionality fix
[SF918G+/SF1008SE+] fix time set in deep standby mode
[GM7162] added 3rd tuner detection
[ALL] force reboot for 7162 ( also 990 & ipboxes but not tested )
[ALL] added paths list preserve for RecPaths
[UFS910] remove SU2 fix
[ALL] added oscam logs info in InfoCenter - required disabled authorization to http and access to local host
[ALL] Add HDMI CEC on/off, default OFF, work only with SF1028/SF1008+/SF918+/UFS912
[ADB] fix twin-tuner
[UFS912] add support for mtd5 - now all flash space is using
[ALL] fix missing lib for grab
[ADB] Add BSKA fan support
[ALL] fix TTX
[ALL] event name fix
[ALL] fix for channels list picons located on external media like /hdd , /usb
[ALL] SecondEvent in channel list speedup
[9900] Boot Setup - fix exit key
[ALL] next fix for mbox ecm info
[ALL] Emu Manager v 1.0.8
[GM7162] fix 3rd tuner
[gm7162] added REC support on VFD
[cuberevo] time fix in deep standby

FTP login: root, passwd: pkteam

http://www.ulozto.cz/xU2i1rv/gm990-git-4411-pkt-1771-stm24-p0211-zip

_________________
* Golden Media UNI-BOX 9060 CRCI HD PVR * FW. GM UNIBOX 300 sp 1.4.99 * Skylink (Ice - Irdeto)* LNB GI - 207 Platinum X 0,2 dB * Ofset. 85 cm Al *


Nahoru
   
 Předmět příspěvku: Re: Golden Media Spark Triplex - Image
PříspěvekOdeslal: 01.Říjen 2012 - 8:32 
Offline
Expert fóra
Expert fóra
Avatar uživatele

Registrován: 21.Leden 2010 - 10:08
Příspěvky: 845
satelitni prijimac: Golden Media UNI-BOX 9060 CRCI
Golden Media Spark 990 Reloaded

Enigma2 OpenSource SH4 Duckbox Project GIT-446X PKT SVN-1840 NEBULA v3 Image

Support receiver: GM990
Kernel stm24-211

Added by sh4 Duckbox Team:

- update pngquant version 1.1
- [p191] clear all buffers on demux error
- Fix SCART output for stx7111 chips
- [E2] fix for largefile Support
- [player2_191] reset TSM when tsm is in idle mode
- update jfsutils version 1.1.15
- update libungif version 4.1.4
- [e2proc] adding more compatibility for 3dmode
- [player_191] ufs910 fix ca recording bug (camrouting)
- [e2proc] new entry hdmi/output allowing switchin output on off by proc
- fix ffmpeg patch
- add vfd scrolling to hs7810a
- [autofs] update to version 4.1.4 supporting ghost mode
- [stmfb_102] fix hdmi hotplug error
- Add dual frontends for ADB_BOX
- [palyer191] add pcm delay support
- [HS7110] optimize st-merger
- update busybox 1.20.2
- update ffmpeg 0.11.1
- [starci] rework module detection handling
- [ufs9xx_cic] rework module detection handling
- [cimax] rework module detection handling
---> Nv3 changes
- fix spark7162 driver by DboxOldie
- [libeplayer3] fix free memleak on flv streams (myvideo)
- [tuxtxt] fix transparent mode
- cleanup ci/ca dev creation handling
- fix spark7162 SIG and SNR dvb-s or dvb-t by dboxoldie

Added by PKT:

[ALL] refresh channel list without restart GUI
[ALL] add support oscam as card server
[ALL] add startup to standby function in BP->System->Standby Tools
[ALL] add new Infocenter screen
[ALL] EPG recovery fix
[ALL] NIM selection adjust for 3 positions
[ALL] added support for mini VFD in progress
[GM7162] mini VFD configuration data for startup
[gm7162] main loop:
+ clear vfd in deepstandby
+ support vfd & led settings in standby
+ fix extinguishing
[ALL] fix lightUp
[GM7162] added FP plugin settings support
[ALL] Graph MultiEPG - added searching of picons on /hdd/picon
[GM7162] set the turn off power led when starts from deep standby
[ALL] KeyMapper extensions for red & yellow key
[ALL] fix NES on startup when LNB not connected
[ALL] fix preserve spaces in text of startup from standby mode
[ALL] fix possibility of NES in startup of radio channel
[GM7162] fix setting power led in TV mode
[ALL] fix GS in instant record sometimes appears if TIMER conflicts
[ALL] added subtitles support to Media Player - TXT files with time stamp & frame stamp.
[ALL] MediaPlayer added SRT txt format , added txt speed regulation up/down key, and many more changes.
[ALL] MediaPlayer: added in srt files detection uft8 format and other fixes
[ALL] MediaPlayer:
+ fix playlist playing
+ fix FPS detection
+ fix text delay
+ added adjustment of text speed
+ fix text startup synchro
[ALL] AudioSelection screen fix - sometimes on 1st start of AudioSelection, the screen contained only empty lines.
[E2] remove SimpleBitrate
[ALL] added new skin PKT Red-HD
[ALL] added EPG key support for MultiEPG
[ALL] SD skin replace by PKT_BasicHD
[ALL] set default skin to PKTRedHD
[ALL] update WebInterface v1.7.1
[GM7162] Volume +/- key functionality fix
[SF918G+/SF1008SE+] fix time set in deep standby mode
[GM7162] added 3rd tuner detection
[ALL] force reboot for 7162 ( also 990 & ipboxes but not tested )
[ALL] added paths list preserve for RecPaths
[UFS910] remove SU2 fix
[ALL] added oscam logs info in InfoCenter - required disabled authorization to http and access to local host
[ALL] Add HDMI CEC on/off, default OFF, work only with SF1028/SF1008+/SF918+/UFS912
[ADB] fix twin-tuner
[UFS912] add support for mtd5 - now all flash space is using
[ALL] fix missing lib for grab
[ADB] Add BSKA fan support
[ALL] fix TTX
---> Nv3 changes
[ALL] fix for channels list picons located on external media like /hdd , /usb
[ALL] SecondEvent in channel list speedup
[9900] Boot Setup - fix exit key
[gm7162] added REC support on VFD
[ADB] add support STV090x tuner
[GM7162] fix power led off after boot from deepstadby
[ALL] fix GS if timezone not selected
[ADB] fix cec
[ALL] fix mount /hdd for recording
[ADB] Add autodetect boxtype
[ADB] Fix BXZB support
[ALL] Info Center: added info for /movie folder if device is different then mounted to /hdd
[ALL] fix utf8 characters in cifs
[ADB] add BZZB support
[ALL] Add converter *.pyc to *.pyo
[GM7162] fix display "9" and "+" on vfd
[ALL] added manual time shift for deepstandby if not match - file: /var/config/time.corr
[ALL] added Permanent TimeShift - default : disabled (BP->System) test mode
[ADB] fix avs error
[ADB] add support CA1 tda8004
[ALL] YouTube players remover from BP menu
[ALL] InfoCenter - Oscam logs in new windows
[ALL] InfoCenter - added USB drive model information
[ALL] new method for CAM starting
[BP] added picons for 13E & Astra19E
[ALL] EMU Manager 1.1.3: added switches: Map CA and autorestart CAM
[ALL] improve stability


Special THX to TDT

FTP login: root, passwd: pkteam

http://www.ulozto.cz/x9XfBXg/gm990-git-4463-pkt-1840-np-stm24-p0211-tar-gz

_________________
* Golden Media UNI-BOX 9060 CRCI HD PVR * FW. GM UNIBOX 300 sp 1.4.99 * Skylink (Ice - Irdeto)* LNB GI - 207 Platinum X 0,2 dB * Ofset. 85 cm Al *


Nahoru
   
 Předmět příspěvku: Re: Golden Media Spark Triplex - Image
PříspěvekOdeslal: 01.Říjen 2012 - 8:35 
Offline
Expert fóra
Expert fóra
Avatar uživatele

Registrován: 21.Leden 2010 - 10:08
Příspěvky: 845
satelitni prijimac: Golden Media UNI-BOX 9060 CRCI
Golden Media Spark Triplex

Enigma2 OpenSource SH4 Duckbox Project GIT-446X PKT SVN-1840 NEBULA v3 Image

Support receiver: GM7162
Kernel stm24-211

Added by sh4 Duckbox Team:

- update pngquant version 1.1
- [p191] clear all buffers on demux error
- Fix SCART output for stx7111 chips
- [E2] fix for largefile Support
- [player2_191] reset TSM when tsm is in idle mode
- update jfsutils version 1.1.15
- update libungif version 4.1.4
- [e2proc] adding more compatibility for 3dmode
- [player_191] ufs910 fix ca recording bug (camrouting)
- [e2proc] new entry hdmi/output allowing switchin output on off by proc
- fix ffmpeg patch
- add vfd scrolling to hs7810a
- [autofs] update to version 4.1.4 supporting ghost mode
- [stmfb_102] fix hdmi hotplug error
- Add dual frontends for ADB_BOX
- [palyer191] add pcm delay support
- [HS7110] optimize st-merger
- update busybox 1.20.2
- update ffmpeg 0.11.1
- [starci] rework module detection handling
- [ufs9xx_cic] rework module detection handling
- [cimax] rework module detection handling
---> Nv3 changes
- fix spark7162 driver by DboxOldie
- [libeplayer3] fix free memleak on flv streams (myvideo)
- [tuxtxt] fix transparent mode
- cleanup ci/ca dev creation handling
- fix spark7162 SIG and SNR dvb-s or dvb-t by dboxoldie

Added by PKT:

[ALL] refresh channel list without restart GUI
[ALL] add support oscam as card server
[ALL] add startup to standby function in BP->System->Standby Tools
[ALL] add new Infocenter screen
[ALL] EPG recovery fix
[ALL] NIM selection adjust for 3 positions
[ALL] added support for mini VFD in progress
[GM7162] mini VFD configuration data for startup
[gm7162] main loop:
+ clear vfd in deepstandby
+ support vfd & led settings in standby
+ fix extinguishing
[ALL] fix lightUp
[GM7162] added FP plugin settings support
[ALL] Graph MultiEPG - added searching of picons on /hdd/picon
[GM7162] set the turn off power led when starts from deep standby
[ALL] KeyMapper extensions for red & yellow key
[ALL] fix NES on startup when LNB not connected
[ALL] fix preserve spaces in text of startup from standby mode
[ALL] fix possibility of NES in startup of radio channel
[GM7162] fix setting power led in TV mode
[ALL] fix GS in instant record sometimes appears if TIMER conflicts
[ALL] added subtitles support to Media Player - TXT files with time stamp & frame stamp.
[ALL] MediaPlayer added SRT txt format , added txt speed regulation up/down key, and many more changes.
[ALL] MediaPlayer: added in srt files detection uft8 format and other fixes
[ALL] MediaPlayer:
+ fix playlist playing
+ fix FPS detection
+ fix text delay
+ added adjustment of text speed
+ fix text startup synchro
[ALL] AudioSelection screen fix - sometimes on 1st start of AudioSelection, the screen contained only empty lines.
[E2] remove SimpleBitrate
[ALL] added new skin PKT Red-HD
[ALL] added EPG key support for MultiEPG
[ALL] SD skin replace by PKT_BasicHD
[ALL] set default skin to PKTRedHD
[ALL] update WebInterface v1.7.1
[GM7162] Volume +/- key functionality fix
[SF918G+/SF1008SE+] fix time set in deep standby mode
[GM7162] added 3rd tuner detection
[ALL] force reboot for 7162 ( also 990 & ipboxes but not tested )
[ALL] added paths list preserve for RecPaths
[UFS910] remove SU2 fix
[ALL] added oscam logs info in InfoCenter - required disabled authorization to http and access to local host
[ALL] Add HDMI CEC on/off, default OFF, work only with SF1028/SF1008+/SF918+/UFS912
[ADB] fix twin-tuner
[UFS912] add support for mtd5 - now all flash space is using
[ALL] fix missing lib for grab
[ADB] Add BSKA fan support
[ALL] fix TTX
---> Nv3 changes
[ALL] fix for channels list picons located on external media like /hdd , /usb
[ALL] SecondEvent in channel list speedup
[9900] Boot Setup - fix exit key
[gm7162] added REC support on VFD
[ADB] add support STV090x tuner
[GM7162] fix power led off after boot from deepstadby
[ALL] fix GS if timezone not selected
[ADB] fix cec
[ALL] fix mount /hdd for recording
[ADB] Add autodetect boxtype
[ADB] Fix BXZB support
[ALL] Info Center: added info for /movie folder if device is different then mounted to /hdd
[ALL] fix utf8 characters in cifs
[ADB] add BZZB support
[ALL] Add converter *.pyc to *.pyo
[GM7162] fix display "9" and "+" on vfd
[ALL] added manual time shift for deepstandby if not match - file: /var/config/time.corr
[ALL] added Permanent TimeShift - default : disabled (BP->System) test mode
[ADB] fix avs error
[ADB] add support CA1 tda8004
[ALL] YouTube players remover from BP menu
[ALL] InfoCenter - Oscam logs in new windows
[ALL] InfoCenter - added USB drive model information
[ALL] new method for CAM starting
[BP] added picons for 13E & Astra19E
[ALL] EMU Manager 1.1.3: added switches: Map CA and autorestart CAM
[ALL] improve stability

Special THX to TDT

FTP login: root, passwd: pkteam

http://www.ulozto.cz/x3nTTdM/gm7162-git-4463-pkt-1840-np-stm24-p0211-tar-gz

_________________
* Golden Media UNI-BOX 9060 CRCI HD PVR * FW. GM UNIBOX 300 sp 1.4.99 * Skylink (Ice - Irdeto)* LNB GI - 207 Platinum X 0,2 dB * Ofset. 85 cm Al *


Nahoru
   
 Předmět příspěvku: Re: Golden Media Spark Triplex - Image
PříspěvekOdeslal: 09.Říjen 2012 - 8:29 
Offline
Expert fóra
Expert fóra
Avatar uživatele

Registrován: 21.Leden 2010 - 10:08
Příspěvky: 845
satelitni prijimac: Golden Media UNI-BOX 9060 CRCI
Golden Media Spark Triplex

Enigma2 OpenSource SH4 Duckbox Project GIT-446X PKT SVN-1843 NEBULA v3 Image

GM7162 GIT-4463 PKT-1843-NP stm24-p0211

Support receiver: GM7162
Kernel stm24-211

FTP login: root, passwd: pkteam
oscam -> boxtype ipbox
mgcamd -> boxtype

http://www.ulozto.cz/xCymydM/gm7162-git-4463-pkt-1843-np-stm24-p0211-zip

_________________
* Golden Media UNI-BOX 9060 CRCI HD PVR * FW. GM UNIBOX 300 sp 1.4.99 * Skylink (Ice - Irdeto)* LNB GI - 207 Platinum X 0,2 dB * Ofset. 85 cm Al *


Nahoru
   
 Předmět příspěvku: Re: Golden Media Spark Triplex - Image
PříspěvekOdeslal: 19.Říjen 2012 - 10:11 
Offline
Expert fóra
Expert fóra
Avatar uživatele

Registrován: 21.Leden 2010 - 10:08
Příspěvky: 845
satelitni prijimac: Golden Media UNI-BOX 9060 CRCI
Golden Media Spark 990 Reloaded

Enigma2 OpenSource SH4 Duckbox Project GIT-446X PKT SVN-1843 NEBULA v3 Image


GM990 GIT-4463 PKT-1843-NP stm24-p0211

Support receiver: GM990
Kernel stm24-211

FTP login: root, passwd: pkteam

http://www.ulozto.cz/xJkX8aG/gm990-git-4463-pkt-1843-np-stm24-p0211-zip

_________________
* Golden Media UNI-BOX 9060 CRCI HD PVR * FW. GM UNIBOX 300 sp 1.4.99 * Skylink (Ice - Irdeto)* LNB GI - 207 Platinum X 0,2 dB * Ofset. 85 cm Al *


Nahoru
   
 Předmět příspěvku: Re: Golden Media Spark Triplex - Image
PříspěvekOdeslal: 29.Říjen 2012 - 8:57 
Offline
Expert fóra
Expert fóra
Avatar uživatele

Registrován: 21.Leden 2010 - 10:08
Příspěvky: 845
satelitni prijimac: Golden Media UNI-BOX 9060 CRCI
Golden Media Spark Triplex

Enigma2 OpenSource SH4 Duckbox Project GIT-446X PKT SVN-1852 NEBULA v3 Image

GM7162 GIT-4513 PKT-1852-NP stm24-p0211

Support receiver: GM7162
Kernel stm24-211

- Fixed audio cinch
- Fixed scaling
- Added support for icons on the VFD
- And further

FTP login: root, passwd: pkteam
oscam -> boxtype ipbox
mgcamd -> boxtype 11

http://www.ulozto.cz/x2Acei2/gm7162-git-4513-pkt-1852-np-stm24-p0211-zip

_________________
* Golden Media UNI-BOX 9060 CRCI HD PVR * FW. GM UNIBOX 300 sp 1.4.99 * Skylink (Ice - Irdeto)* LNB GI - 207 Platinum X 0,2 dB * Ofset. 85 cm Al *


Nahoru
   
 Předmět příspěvku: Re: Golden Media Spark Triplex - Image
PříspěvekOdeslal: 06.Listopad 2012 - 7:33 
Offline
Expert fóra
Expert fóra
Avatar uživatele

Registrován: 21.Leden 2010 - 10:08
Příspěvky: 845
satelitni prijimac: Golden Media UNI-BOX 9060 CRCI
Golden Media Spark 990 Reloaded

Enigma2 OpenSource SH4 Duckbox Project GIT-4527 PKT SVN-1873 NEBULA v3 Image

gm990_GIT-4527_PKT-1873_stm24-p0207.tar

Support receiver: GM990
Kernel stm24-207

Altes Changelog:
Zitat:
Added by sh4 Duckbox Team:

- update pngquant version 1.1
- [p191] clear all buffers on demux error
- Fix SCART output for stx7111 chips
- [E2] fix for largefile Support
- [player2_191] reset TSM when tsm is in idle mode
- update jfsutils version 1.1.15
- update libungif version 4.1.4
- [e2proc] adding more compatibility for 3dmode
- [player_191] ufs910 fix ca recording bug (camrouting)
- [e2proc] new entry hdmi/output allowing switchin output on off by proc
- fix ffmpeg patch
- add vfd scrolling to hs7810a
- [autofs] update to version 4.1.4 supporting ghost mode
- [stmfb_102] fix hdmi hotplug error
- Add dual frontends for ADB_BOX
- [palyer191] add pcm delay support
- [HS7110] optimize st-merger
- update busybox 1.20.2
- update ffmpeg 0.11.1
- [starci] rework module detection handling
- [ufs9xx_cic] rework module detection handling
- [cimax] rework module detection handling
---> Nv3 changes
- fix spark7162 driver by DboxOldie
- [libeplayer3] fix free memleak on flv streams (myvideo)
- [tuxtxt] fix transparent mode
- cleanup ci/ca dev creation handling
- fix spark7162 SIG and SNR dvb-s or dvb-t by dboxoldie

Added by PKT:

[ALL] refresh channel list without restart GUI
[ALL] add support oscam as card server
[ALL] add startup to standby function in BP->System->Standby Tools
[ALL] add new Infocenter screen
[ALL] EPG recovery fix
[ALL] NIM selection adjust for 3 positions
[ALL] added support for mini VFD in progress
[GM7162] mini VFD configuration data for startup
[gm7162] main loop:
+ clear vfd in deepstandby
+ support vfd & led settings in standby
+ fix extinguishing
[ALL] fix lightUp
[GM7162] added FP plugin settings support
[ALL] Graph MultiEPG - added searching of picons on /hdd/picon
[GM7162] set the turn off power led when starts from deep standby
[ALL] KeyMapper extensions for red & yellow key
[ALL] fix NES on startup when LNB not connected
[ALL] fix preserve spaces in text of startup from standby mode
[ALL] fix possibility of NES in startup of radio channel
[GM7162] fix setting power led in TV mode
[ALL] fix GS in instant record sometimes appears if TIMER conflicts
[ALL] added subtitles support to Media Player - TXT files with time stamp & frame stamp.
[ALL] MediaPlayer added SRT txt format , added txt speed regulation up/down key, and many more changes.
[ALL] MediaPlayer: added in srt files detection uft8 format and other fixes
[ALL] MediaPlayer:
+ fix playlist playing
+ fix FPS detection
+ fix text delay
+ added adjustment of text speed
+ fix text startup synchro
[ALL] AudioSelection screen fix - sometimes on 1st start of AudioSelection, the screen contained only empty lines.
[E2] remove SimpleBitrate
[ALL] added new skin PKT Red-HD
[ALL] added EPG key support for MultiEPG
[ALL] SD skin replace by PKT_BasicHD
[ALL] set default skin to PKTRedHD
[ALL] update WebInterface v1.7.1
[GM7162] Volume +/- key functionality fix
[SF918G+/SF1008SE+] fix time set in deep standby mode
[GM7162] added 3rd tuner detection
[ALL] force reboot for 7162 ( also 990 & ipboxes but not tested )
[ALL] added paths list preserve for RecPaths
[UFS910] remove SU2 fix
[ALL] added oscam logs info in InfoCenter - required disabled authorization to http and access to local host
[ALL] Add HDMI CEC on/off, default OFF, work only with SF1028/SF1008+/SF918+/UFS912
[ADB] fix twin-tuner
[UFS912] add support for mtd5 - now all flash space is using
[ALL] fix missing lib for grab
[ADB] Add BSKA fan support
[ALL] fix TTX
---> Nv3 changes
[ALL] fix for channels list picons located on external media like /hdd , /usb
[ALL] SecondEvent in channel list speedup
[9900] Boot Setup - fix exit key
[gm7162] added REC support on VFD
[ADB] add support STV090x tuner
[GM7162] fix power led off after boot from deepstadby
[ALL] fix GS if timezone not selected
[ADB] fix cec
[ALL] fix mount /hdd for recording
[ADB] Add autodetect boxtype
[ADB] Fix BXZB support
[ALL] Info Center: added info for /movie folder if device is different then mounted to /hdd
[ALL] fix utf8 characters in cifs
[ADB] add BZZB support
[ALL] Add converter *.pyc to *.pyo
[GM7162] fix display "9" and "+" on vfd
[ALL] added manual time shift for deepstandby if not match - file: /var/config/time.corr
[ALL] added Permanent TimeShift - default : disabled (BP->System) test mode
[ADB] fix avs error
[ADB] add support CA1 tda8004
[ALL] YouTube players remover from BP menu
[ALL] InfoCenter - Oscam logs in new windows
[ALL] InfoCenter - added USB drive model information
[ALL] new method for CAM starting
[BP] added picons for 13E & Astra19E
[ALL] EMU Manager 1.1.3: added switches: Map CA and autorestart CAM
[ALL] improve stability

FTP login: root, passwd: pkteam

http://www.ulozto.cz/xKknDtK/gm990-git-4527-pkt-1873-stm24-p0207-tar-gz

_________________
* Golden Media UNI-BOX 9060 CRCI HD PVR * FW. GM UNIBOX 300 sp 1.4.99 * Skylink (Ice - Irdeto)* LNB GI - 207 Platinum X 0,2 dB * Ofset. 85 cm Al *


Nahoru
   
 Předmět příspěvku: Re: Golden Media Spark Triplex - Image
PříspěvekOdeslal: 06.Leden 2013 - 21:15 
Offline
Expert fóra
Expert fóra
Avatar uživatele

Registrován: 21.Leden 2010 - 10:08
Příspěvky: 845
satelitni prijimac: Golden Media UNI-BOX 9060 CRCI
Golden Media Spark 990 Reloaded

spark7111_golden_1.2.60_app

http://www.ulozto.cz/xh769gb/spark7111-golden-1-2-60-app-rar

Golden Media Spark Triplex

spark7162_golden_1.2.60_app

http://www.ulozto.cz/xm659gb/spark7162-golden-1-2-60-app-rar

Firmware 1.2.60

- Added: Multi-Web server: network broadcast, STV, channel switching and more.
- Added: Support unicable.
- Added: The blind search.
- Added: Playing archives gears in "The picture of TV."
- Added: Auto-scanning of network resources.
- Added: Hints in the virtual keyboard to the browser "Opera"
- Fixed: Hang on some channels when switching subtitles.
- Fixed: Synchronization of audio and video.
- Fixed: The weather.
- Fixed: Line subtitle disappeared before the new line.
- Fixed: Message «HDD device successfully removed" disappears too quickly. It will now be shown for 3 seconds.
- Changed: The name of the current transfer record corresponds to STV.
- Changed: Full text with large font.

Firmware 1.2.60

- Přidáno: Multi-Web server: síťová vysílání, STV, přepínání kanálů a další.
- Přidáno: Podpora Unicable.
- Přidáno: slepé hledání.
- Přidáno: Doba archivy rychlosti v "The obrázku televizoru."
- Přidáno: Auto-skenování síťových zdrojů.
- Přidáno: Tipy na virtuální klávesnici na prohlížeči "Opera"
- Opraveno: Pověste je u některých kanálů při přepínání titulků.
- Opraveno: Synchronizace audia a videa.
- Opraveno: Počasí.
- Opraveno: Line titulky zmizel před nový řádek.
- Opraveno: Zpráva «HDD zařízení úspěšně odstraněn" zmizí příliš rychle. To se nyní zobrazí na 3 sekundy.
- Změněno: název aktuálního převodu záznamu odpovídá STV.
- Změněno: Plný text s velkým písmem.

_________________
* Golden Media UNI-BOX 9060 CRCI HD PVR * FW. GM UNIBOX 300 sp 1.4.99 * Skylink (Ice - Irdeto)* LNB GI - 207 Platinum X 0,2 dB * Ofset. 85 cm Al *


Nahoru
   
 Předmět příspěvku: Re: Golden Media Spark Triplex - Image
PříspěvekOdeslal: 14.Leden 2013 - 14:46 
Offline
Expert fóra
Expert fóra
Avatar uživatele

Registrován: 21.Leden 2010 - 10:08
Příspěvky: 845
satelitni prijimac: Golden Media UNI-BOX 9060 CRCI
Golden Media Spark Triplex

Neutrino-martiiGit-by-FFTeam-12-01-2013

Neutrino martiiGit FFTeam-by-12-01-2013 for GM, Sab Triplex, Amiko Alien 2 all 7162 Receiver
- New driver included for new GM Triplex T2 tuner (let's see if the go)
- Goes to press volume now senderName again
Blue button-games added
- Blue button neutrino plugins, emu point
- AdZap (advertising Zapper) is inside
Integrated flex menu (NeutrinoHD plugins) -
- Movie Player integrated GOTO function
- 3D modes Side-by-Side/Top-Bottom/Tiled
- Use settings for OSD
- Info Viewer displays the correct button names
- Volume increase / lowering can be set per channel audio
- GraphLCD (the cheap LCD that there was at Pearl) is supported
- HDMI-CEC is integrated
- Mount / Unmount the drive menu
- LED feedback when you press the remote control
- FreeSat and Viasat EPG support (also MHWEPG, via a batch job)
- OSD for PSI settings (hue, contrast, ...)
- Logos neutrino and E2-Picon
Oscam-starts automatically IP: 8888 webif oscam
- Ip normal webif neutrino
- NTFS HDD's can be described (but slow!)
FTP Support, Rights as 755 can be set to any FTP program
- WebTV in multimedia menu (4 Adult's HARDCORE as examples)
- UPnP Browser
- Commander TuxBox
- Tuxwetter
New integrated WLAN Driver -
- Multiple languages
Blue button-scripts, backup mgcamdstart, cccamstart, camd3start, oscamstart
- Fix for all current Nand Nandspeicher THX Thomas, Martti, Schufti

Instructions E2/Neutrino flash:

In preparation, the boot loader [SPARK] to [Enigma] be changed:
- Unit at the main power switch at the rear
Appears to hold while turning the [OK] [FORC] in the display -
- Now select with the arrow key [V] now [ENIG] and confirm with [OK]
- Box flashes for a few seconds now
- Switch off when finished> Box

Flashing Enigma2/Neutrino:
- Folder [enigma2] Create a USB Stick
- Unzip and copy the files "e2jffs2.img" + "uImage" to the [enigma2] to the stick
- Stick to the unit where infected
- Hold on power, press [OK] to [FORCED] appears
- Now press the arrow key [>] for update from a USB stick> now the upload will begin to flash, as evidenced by [U LD] in the display
- The device boots then newly independent

TIP: to play
Menu press
1 settings
1 Video
pal on e.g. 1080i 50Hz put 16:6

Blue button - emu - emu desired start (oscam ip: 8888 Report Card ready)

http://www.ulozto.cz/xqaqrUJ/neutrino-martiigit-by-ffteam-12-01-2013-zip

_________________
* Golden Media UNI-BOX 9060 CRCI HD PVR * FW. GM UNIBOX 300 sp 1.4.99 * Skylink (Ice - Irdeto)* LNB GI - 207 Platinum X 0,2 dB * Ofset. 85 cm Al *


Nahoru
   
 Předmět příspěvku: Re: Golden Media Spark Triplex - Image
PříspěvekOdeslal: 09.Duben 2013 - 18:39 
Offline
Expert fóra
Expert fóra
Avatar uživatele

Registrován: 21.Leden 2010 - 10:08
Příspěvky: 845
satelitni prijimac: Golden Media UNI-BOX 9060 CRCI
Golden Media Spark 990 CR PVR /Reloaded

Software_GM_Spark_990_Reloaded_1.2.63_app

Golden Media Spark TRIPLEX/ ONE

Software_GM_Spark_ONE_TRIPLEX_1.2.63_app

Version 2.1.63.

Added: Support for MPLP T2 (for receivers Avatar)
Added: Support protocols UDP / HLS.
Added: Support WiFi D-Link DWA-150 and DWA-rev.B 125 rev.A3.
Added: Support for 3G modem Huawei E1820.
New: Support for modem Huawei E3276 (Megafon M150-1) in the mode 2G/3G.
Improved: Virtual Keyboard.
Improved: Cross EPG (EPG for 7 days and download in the background).
Improved: Working in 1080p.
Improved: Number of timers increased from 8 to 50.
Improved: Translation into Finnish.
Fixed: Errors in the weather forecast.
Fixed: Problem with delay radio for 3 minutes.
Fixed: Fading Images for 1-2 seconds. on channels with audio tracks.
Fix: EPG on channels Tricolor Center.
Fixed: Do not pick up a signal to the scan (for receivers Avatar)
Fixed: Incorrect numbering and duplicate terrestrial and cable channels (for receivers Avatar)

Golden Media Spark 990 CR PVR /Reloaded :
http://ulozto.cz/xGCYUJqP/software-gm-spark-990-reloaded-1-2-63-app-zip

Golden Media Spark TRIPLEX/ ONE :
http://ulozto.cz/xCf74Ktg/software-gm-spark-one-triplex-1-2-63-app-rar

_________________
* Golden Media UNI-BOX 9060 CRCI HD PVR * FW. GM UNIBOX 300 sp 1.4.99 * Skylink (Ice - Irdeto)* LNB GI - 207 Platinum X 0,2 dB * Ofset. 85 cm Al *


Nahoru
   
Zobrazit příspěvky za poslední:  Seřadit podle  
Poslat nové téma  Odpovědět do tématu  [ 16 příspěvků ] 

Všechny časy jsou v UTC+01:00


Kdo je online

Uživatelé prohlížející si toto fórum: Nejsou tu žádní registrovaní uživatelé a 1 host


Nemůžete posílat nová témata
Nemůžete odpovídat v tématech
Nemůžete upravovat vlastní příspěvky
Nemůžete mazat vlastní příspěvky
Nemůžete posílat přílohy

Najít:
Přejít na:  
ellano.sk