AMIKO SHD 8900 ALIEN+ARGUS PINGULUS+GM990 / DOWNLOAD
Moderátoři: cityglam1, Duce, lacoland
Pravidla fóra
Do sekce DOWNLOAD nepatří žádné dotazy.
Máme tady i sekci na diskutování.
Dotaz bude přesunut nebo smazán bez upozornění !!!
Do sekce DOWNLOAD nepatří žádné dotazy.
Máme tady i sekci na diskutování.
Dotaz bude přesunut nebo smazán bez upozornění !!!
AMIKO SHD 8900 ALIEN+ARGUS PINGULUS+GM990 / DOWNLOAD
DOWNLOAD SPARK/ENIGMA/PLUGINY/SETTING a všetko pre tieto príjmače..
Pre prehladnost uvadzajte aj pod aký op.system to patrí,resp.od akej verzie ak je to potrebné!!!
Pre prehladnost uvadzajte aj pod aký op.system to patrí,resp.od akej verzie ak je to potrebné!!!
Naposledy upravil(a) Pastoman dne 28.listopad 2011 - 8:47, celkem upraveno 2 x.
uClan Ustym 4K PRO / OpenATV6.4+OS Define
uClan Ustym S2 4K OTT / OS DENYS
Nokia Streaming Box 8000 / OS Android TV 10
uClan Ustym S2 4K OTT / OS DENYS
Nokia Streaming Box 8000 / OS Android TV 10
-
- Mírně pokročilý
- Příspěvky: 67
- Registrován: 07.březen 2010 - 12:02
- satelitni prijimac: Amiko SHD-8900 Alien, Vu+ Duo
Re: AMIKO SHD 8900 ALIEN+ARGUS PINGULUS+GM990 / DOWNLOAD
Editor settingu s možností importovat seznamy kanálů přímo z kingofsat pro Spark/Enigma
Nemáte oprávnění prohlížet přiložené soubory.
Naposledy upravil(a) kispicer dne 21.prosinec 2011 - 21:38, celkem upraveno 1 x.
Vu+ DUO PVR Twin
OpenATV-3.0-vuduo
MOTOR Optibox DM 2400
OpenATV-3.0-vuduo
MOTOR Optibox DM 2400
-
- Mírně pokročilý
- Příspěvky: 67
- Registrován: 07.březen 2010 - 12:02
- satelitni prijimac: Amiko SHD-8900 Alien, Vu+ Duo
Re: AMIKO SHD 8900 ALIEN+ARGUS PINGULUS+GM990 / DOWNLOAD
přikládám tady CSFD plugin pro E2 který jsem při uploadu DogSettings editoru nechtěně smazal
Nemáte oprávnění prohlížet přiložené soubory.
Vu+ DUO PVR Twin
OpenATV-3.0-vuduo
MOTOR Optibox DM 2400
OpenATV-3.0-vuduo
MOTOR Optibox DM 2400
Re: AMIKO SHD 8900 ALIEN+ARGUS PINGULUS+GM990 / DOWNLOAD
Editor settingu pre" SPARK aj ENIGMU 2"
Program nakonfigurovať volbu pre SPARK/ENIGMU2,IP prijmača,user-pass atd.
Program nakonfigurovať volbu pre SPARK/ENIGMU2,IP prijmača,user-pass atd.
Nemáte oprávnění prohlížet přiložené soubory.
uClan Ustym 4K PRO / OpenATV6.4+OS Define
uClan Ustym S2 4K OTT / OS DENYS
Nokia Streaming Box 8000 / OS Android TV 10
uClan Ustym S2 4K OTT / OS DENYS
Nokia Streaming Box 8000 / OS Android TV 10
-
- Znalec fóra
- Příspěvky: 577
- Registrován: 17.květen 2009 - 13:39
- satelitni prijimac: Optibox 8750 HDCICX
- Bydliště: Vysočina
- Kontaktovat uživatele:
Re: AMIKO SHD 8900 ALIEN+ARGUS PINGULUS+GM990 / DOWNLOAD
Permanent timeshift
Adresář Permament Timeshift zkopírovat do /usr/lib/enigma2/python/Plugins/Extensions potom restart.
Nastavit lze v Menu-Nastavení-Systém-Timeshift Settings
Adresář Permament Timeshift zkopírovat do /usr/lib/enigma2/python/Plugins/Extensions potom restart.
Nastavit lze v Menu-Nastavení-Systém-Timeshift Settings
Nemáte oprávnění prohlížet přiložené soubory.
VU+ Solo2, Gigablue quad plus, Formuler F4 turbo combo - vše doscam 0.25, OpenATV 6.3, Optibox 8750 HDCICX-newcamd, MULTIBEAM 85 (13E, 19,2E, 23,5E, 28,2E), 4x INVERTO Quatro LNB 0,2dB, 4x DiseqC DSC-304D 4x1, Skylink ICE 0624
-
- Mírně pokročilý
- Příspěvky: 67
- Registrován: 07.březen 2010 - 12:02
- satelitni prijimac: Amiko SHD-8900 Alien, Vu+ Duo
Re: AMIKO SHD 8900 ALIEN+ARGUS PINGULUS+GM990 / DOWNLOAD
Nějaká upravená verze PKT Nebula Image.......(NETESTOVANO !!!)
PKTeam Nebula mod by vardan85
info k tomuto image (překlad google) :
Mnoho díky tvůrce vardan85
1. Opraven - Opraven pád mezi kanály (důvod byl v modulu aotom.ko, thx Marttim)
2. Pevné - rozmazaný obraz Režim letterbox (scart)
2. Přidání - Podpora pro všechny klony sparkbox (RC)
3. Přidání - přestavěná na dálkové GI S8120 a Amiko 8900 plugin MultiQuickButton
4. Publikováno - plně přizpůsoben k tomuto obrázku kožního Vanity HD (autor kůže mmark)
5. Přidání - display Azbuka (CIFS) (thx Igornord)
6. Přidání - display Azbuka (ntfs) (thx Taapat)
7. Dobavleno - script ReplaceGen.py - generátor replace.list na mgcamd. Spustí
automatické pouze v případě mgcamd startup (thx Nomad, Taapat)
8. Dobavleno - Plugins 2IB, BackUp, ServiceEditor, SimpleSatScan
9. Odstraněno - některé zbytečné pluginy a všechny skiny s výjimkou třídy a alienHD
http://download79.files.mail.ru/X7LPR6/ ... rdan85.zip
PKTeam Nebula mod by vardan85
info k tomuto image (překlad google) :
Mnoho díky tvůrce vardan85
1. Opraven - Opraven pád mezi kanály (důvod byl v modulu aotom.ko, thx Marttim)
2. Pevné - rozmazaný obraz Režim letterbox (scart)
2. Přidání - Podpora pro všechny klony sparkbox (RC)
3. Přidání - přestavěná na dálkové GI S8120 a Amiko 8900 plugin MultiQuickButton
4. Publikováno - plně přizpůsoben k tomuto obrázku kožního Vanity HD (autor kůže mmark)
5. Přidání - display Azbuka (CIFS) (thx Igornord)
6. Přidání - display Azbuka (ntfs) (thx Taapat)
7. Dobavleno - script ReplaceGen.py - generátor replace.list na mgcamd. Spustí
automatické pouze v případě mgcamd startup (thx Nomad, Taapat)
8. Dobavleno - Plugins 2IB, BackUp, ServiceEditor, SimpleSatScan
9. Odstraněno - některé zbytečné pluginy a všechny skiny s výjimkou třídy a alienHD
http://download79.files.mail.ru/X7LPR6/ ... rdan85.zip
Nemáte oprávnění prohlížet přiložené soubory.
Vu+ DUO PVR Twin
OpenATV-3.0-vuduo
MOTOR Optibox DM 2400
OpenATV-3.0-vuduo
MOTOR Optibox DM 2400
HDMU_1073_E2_spark_210_git_4583_nodebug_nolcd_Diff3_Flash
fix in addliste
add nodebug config spark7162
add fix in st-pti
now can used duckbox on spark7162
remove unneeded files
Merge branch 'master' of http://saas1203sm.saas-secure.com/git/ipk
fix swap on firstboot for ufs910
update webmedia plugin, TVSpielfilm plugin
add new skins thx grle48
add Mirco-Stargate-Edition-HD skin thx Mirco
add wikipedia plugin
add revolution bootlogo thx JKM73
add revolution skin thx JKM73
pridal jsem soubory pro amiko alien aby fungoval ovladac , puvodni smazat a nové nakopirovat a nastavit atribut 755 ,restartovat prijmac , odskouseno
add nodebug config spark7162
add fix in st-pti
now can used duckbox on spark7162
remove unneeded files
Merge branch 'master' of http://saas1203sm.saas-secure.com/git/ipk
fix swap on firstboot for ufs910
update webmedia plugin, TVSpielfilm plugin
add new skins thx grle48
add Mirco-Stargate-Edition-HD skin thx Mirco
add wikipedia plugin
add revolution bootlogo thx JKM73
add revolution skin thx JKM73
pridal jsem soubory pro amiko alien aby fungoval ovladac , puvodni smazat a nové nakopirovat a nastavit atribut 755 ,restartovat prijmac , odskouseno
Kód: Vybrat vše
http://ulozto.cz/xvZPAAKw/hdmu-1073-e2-spark-210-git-4583-nodebug-nolcd-diff3-flash-zip
Kód: Vybrat vše
http://bezvadata.cz/stahnout/107099_hdmu-1073-e2-spark-210-git-4583-nodebug-nolcd-diff3-flash.zip
Naposledy upravil(a) badi80 dne 30.listopad 2013 - 22:31, celkem upraveno 1 x.
ZGEMMA H7S , DISECQ MOTOR 52,5E-30W
Re: AMIKO SHD 8900 ALIEN+ARGUS PINGULUS+GM990 / DOWNLOAD
Spark exclusive online Plugin
New spark plugins that allows to download and install direct from internet Last Emu / Keys / setting /path ..
one plugin that allows you to download all last version Mgcamd/Cccam/keys…
You can find all last keys.
bigj66 doplna: "ať zadávají tuhle adresu jinak to nebude fungovat"
http://host1foot.no-ip.info:8080
New spark plugins that allows to download and install direct from internet Last Emu / Keys / setting /path ..
one plugin that allows you to download all last version Mgcamd/Cccam/keys…
You can find all last keys.
bigj66 doplna: "ať zadávají tuhle adresu jinak to nebude fungovat"
http://host1foot.no-ip.info:8080
Nemáte oprávnění prohlížet přiložené soubory.
Naposledy upravil(a) joe6pack dne 07.září 2012 - 23:26, celkem upraveno 1 x.
-
- Mírně pokročilý
- Příspěvky: 67
- Registrován: 07.březen 2010 - 12:02
- satelitni prijimac: Amiko SHD-8900 Alien, Vu+ Duo
Re: AMIKO SHD 8900 ALIEN+ARGUS PINGULUS+GM990 / DOWNLOAD
picony skylink/cslink alien1 (spark 204x126 pixel)
* složku nakopčit do /root/spark/AppUserDb
* složku nakopčit do /root/spark/AppUserDb
Nemáte oprávnění prohlížet přiložené soubory.
Vu+ DUO PVR Twin
OpenATV-3.0-vuduo
MOTOR Optibox DM 2400
OpenATV-3.0-vuduo
MOTOR Optibox DM 2400
-
- Mírně pokročilý
- Příspěvky: 67
- Registrován: 07.březen 2010 - 12:02
- satelitni prijimac: Amiko SHD-8900 Alien, Vu+ Duo
Re: AMIKO SHD 8900 ALIEN+ARGUS PINGULUS+GM990 / DOWNLOAD
Spark Editor 1.7
Spark editor 1.7 s možnosti editovat picony pro funkci Tv Wall ve sparku
Pro editaci iconů je potřebné si ztáhnout přes grafické rozhrání přijímače,nejlépe na flešku,aktualní
databazi programů t.j.(radio_fav,radio_prog,sat,tv_fav,tv_prog) .xml
Pak na PC v programu otevřít databázi /vybrat si satelit na kterém chcete editovat icony /kliknout v horní části lyšty na položku icon /Load icon/ vyhledat složku s icony (může to být složka s icony i z přijímače která je umístěná v root/spark/AppUserDb) a po kliknutí prázdného polička pro daný kanal vyhledat příslušnou iconu a vybrat si je. Programek automaticky překonvrtuje format referenční kody iconů pro daný satelit a druh kanálu ,takže jeden icon se můžě zobrazovat i víckrát avšak nikdy ne na stejném satelitu !
Spark editor 1.7 s možnosti editovat picony pro funkci Tv Wall ve sparku
Pro editaci iconů je potřebné si ztáhnout přes grafické rozhrání přijímače,nejlépe na flešku,aktualní
databazi programů t.j.(radio_fav,radio_prog,sat,tv_fav,tv_prog) .xml
Pak na PC v programu otevřít databázi /vybrat si satelit na kterém chcete editovat icony /kliknout v horní části lyšty na položku icon /Load icon/ vyhledat složku s icony (může to být složka s icony i z přijímače která je umístěná v root/spark/AppUserDb) a po kliknutí prázdného polička pro daný kanal vyhledat příslušnou iconu a vybrat si je. Programek automaticky překonvrtuje format referenční kody iconů pro daný satelit a druh kanálu ,takže jeden icon se můžě zobrazovat i víckrát avšak nikdy ne na stejném satelitu !
Nemáte oprávnění prohlížet přiložené soubory.
Vu+ DUO PVR Twin
OpenATV-3.0-vuduo
MOTOR Optibox DM 2400
OpenATV-3.0-vuduo
MOTOR Optibox DM 2400
PKT NEBULA V2
Kód: Vybrat vše
http://ulozto.cz/x88ruPu/amiko-alien-pkt-nebula-v2-rar
ZGEMMA H7S , DISECQ MOTOR 52,5E-30W
PKT GM990 NEBULA v3 image GIT-446X PKT SVN-1840
Support receiver: GM990
Kernel stm24-211
Added by sh4 Duckbox Team:
- update pngquant version 1.1
- [p191] clear all buffers on demux error
- Fix SCART output for stx7111 chips
- [E2] fix for largefile Support
- [player2_191] reset TSM when tsm is in idle mode
- update jfsutils version 1.1.15
- update libungif version 4.1.4
- [e2proc] adding more compatibility for 3dmode
- [player_191] ufs910 fix ca recording bug (camrouting)
- [e2proc] new entry hdmi/output allowing switchin output on off by proc
- fix ffmpeg patch
- add vfd scrolling to hs7810a
- [autofs] update to version 4.1.4 supporting ghost mode
- [stmfb_102] fix hdmi hotplug error
- Add dual frontends for ADB_BOX
- [palyer191] add pcm delay support
- [HS7110] optimize st-merger
- update busybox 1.20.2
- update ffmpeg 0.11.1
- [starci] rework module detection handling
- [ufs9xx_cic] rework module detection handling
- [cimax] rework module detection handling
---> Nv3 changes
- fix spark7162 driver by DboxOldie
- [libeplayer3] fix free memleak on flv streams (myvideo)
- [tuxtxt] fix transparent mode
- cleanup ci/ca dev creation handling
- fix spark7162 SIG and SNR dvb-s or dvb-t by dboxoldie
Added by PKT:
[ALL] refresh channel list without restart GUI
[ALL] add support oscam as card server
[ALL] add startup to standby function in BP->System->Standby Tools
[ALL] add new Infocenter screen
[ALL] EPG recovery fix
[ALL] NIM selection adjust for 3 positions
[ALL] added support for mini VFD in progress
[GM7162] mini VFD configuration data for startup
[gm7162] main loop:
+ clear vfd in deepstandby
+ support vfd & led settings in standby
+ fix extinguishing
[ALL] fix lightUp
[GM7162] added FP plugin settings support
[ALL] Graph MultiEPG - added searching of picons on /hdd/picon
[GM7162] set the turn off power led when starts from deep standby
[ALL] KeyMapper extensions for red & yellow key
[ALL] fix NES on startup when LNB not connected
[ALL] fix preserve spaces in text of startup from standby mode
[ALL] fix possibility of NES in startup of radio channel
[GM7162] fix setting power led in TV mode
[ALL] fix GS in instant record sometimes appears if TIMER conflicts
[ALL] added subtitles support to Media Player - TXT files with time stamp & frame stamp.
[ALL] MediaPlayer added SRT txt format , added txt speed regulation up/down key, and many more changes.
[ALL] MediaPlayer: added in srt files detection uft8 format and other fixes
[ALL] MediaPlayer:
+ fix playlist playing
+ fix FPS detection
+ fix text delay
+ added adjustment of text speed
+ fix text startup synchro
[ALL] AudioSelection screen fix - sometimes on 1st start of AudioSelection, the screen contained only empty lines.
[E2] remove SimpleBitrate
[ALL] added new skin PKT Red-HD
[ALL] added EPG key support for MultiEPG
[ALL] SD skin replace by PKT_BasicHD
[ALL] set default skin to PKTRedHD
[ALL] update WebInterface v1.7.1
[GM7162] Volume +/- key functionality fix
[SF918G+/SF1008SE+] fix time set in deep standby mode
[GM7162] added 3rd tuner detection
[ALL] force reboot for 7162 ( also 990 & ipboxes but not tested )
[ALL] added paths list preserve for RecPaths
[UFS910] remove SU2 fix
[ALL] added oscam logs info in InfoCenter - required disabled authorization to http and access to local host
[ALL] Add HDMI CEC on/off, default OFF, work only with SF1028/SF1008+/SF918+/UFS912
[ADB] fix twin-tuner
[UFS912] add support for mtd5 - now all flash space is using
[ALL] fix missing lib for grab
[ADB] Add BSKA fan support
[ALL] fix TTX
---> Nv3 changes
[ALL] fix for channels list picons located on external media like /hdd , /usb
[ALL] SecondEvent in channel list speedup
[9900] Boot Setup - fix exit key
[gm7162] added REC support on VFD
[ADB] add support STV090x tuner
[GM7162] fix power led off after boot from deepstadby
[ALL] fix GS if timezone not selected
[ADB] fix cec
[ALL] fix mount /hdd for recording
[ADB] Add autodetect boxtype
[ADB] Fix BXZB support
[ALL] Info Center: added info for /movie folder if device is different then mounted to /hdd
[ALL] fix utf8 characters in cifs
[ADB] add BZZB support
[ALL] Add converter *.pyc to *.pyo
[GM7162] fix display "9" and "+" on vfd
[ALL] added manual time shift for deepstandby if not match - file: /var/config/time.corr
[ALL] added Permanent TimeShift - default : disabled (BP->System) test mode
[ADB] fix avs error
[ADB] add support CA1 tda8004
[ALL] YouTube players remover from BP menu
[ALL] InfoCenter - Oscam logs in new windows
[ALL] InfoCenter - added USB drive model information
[ALL] new method for CAM starting
[BP] added picons for 13E & Astra19E
[ALL] EMU Manager 1.1.3: added switches: Map CA and autorestart CAM
[ALL] improve stability
Special THX to TDT
FTP login: root, passwd: pkteam
http://ulozto.cz/x3j4fNT/gm990-git-4463 ... -p0211-rar
Kernel stm24-211
Added by sh4 Duckbox Team:
- update pngquant version 1.1
- [p191] clear all buffers on demux error
- Fix SCART output for stx7111 chips
- [E2] fix for largefile Support
- [player2_191] reset TSM when tsm is in idle mode
- update jfsutils version 1.1.15
- update libungif version 4.1.4
- [e2proc] adding more compatibility for 3dmode
- [player_191] ufs910 fix ca recording bug (camrouting)
- [e2proc] new entry hdmi/output allowing switchin output on off by proc
- fix ffmpeg patch
- add vfd scrolling to hs7810a
- [autofs] update to version 4.1.4 supporting ghost mode
- [stmfb_102] fix hdmi hotplug error
- Add dual frontends for ADB_BOX
- [palyer191] add pcm delay support
- [HS7110] optimize st-merger
- update busybox 1.20.2
- update ffmpeg 0.11.1
- [starci] rework module detection handling
- [ufs9xx_cic] rework module detection handling
- [cimax] rework module detection handling
---> Nv3 changes
- fix spark7162 driver by DboxOldie
- [libeplayer3] fix free memleak on flv streams (myvideo)
- [tuxtxt] fix transparent mode
- cleanup ci/ca dev creation handling
- fix spark7162 SIG and SNR dvb-s or dvb-t by dboxoldie
Added by PKT:
[ALL] refresh channel list without restart GUI
[ALL] add support oscam as card server
[ALL] add startup to standby function in BP->System->Standby Tools
[ALL] add new Infocenter screen
[ALL] EPG recovery fix
[ALL] NIM selection adjust for 3 positions
[ALL] added support for mini VFD in progress
[GM7162] mini VFD configuration data for startup
[gm7162] main loop:
+ clear vfd in deepstandby
+ support vfd & led settings in standby
+ fix extinguishing
[ALL] fix lightUp
[GM7162] added FP plugin settings support
[ALL] Graph MultiEPG - added searching of picons on /hdd/picon
[GM7162] set the turn off power led when starts from deep standby
[ALL] KeyMapper extensions for red & yellow key
[ALL] fix NES on startup when LNB not connected
[ALL] fix preserve spaces in text of startup from standby mode
[ALL] fix possibility of NES in startup of radio channel
[GM7162] fix setting power led in TV mode
[ALL] fix GS in instant record sometimes appears if TIMER conflicts
[ALL] added subtitles support to Media Player - TXT files with time stamp & frame stamp.
[ALL] MediaPlayer added SRT txt format , added txt speed regulation up/down key, and many more changes.
[ALL] MediaPlayer: added in srt files detection uft8 format and other fixes
[ALL] MediaPlayer:
+ fix playlist playing
+ fix FPS detection
+ fix text delay
+ added adjustment of text speed
+ fix text startup synchro
[ALL] AudioSelection screen fix - sometimes on 1st start of AudioSelection, the screen contained only empty lines.
[E2] remove SimpleBitrate
[ALL] added new skin PKT Red-HD
[ALL] added EPG key support for MultiEPG
[ALL] SD skin replace by PKT_BasicHD
[ALL] set default skin to PKTRedHD
[ALL] update WebInterface v1.7.1
[GM7162] Volume +/- key functionality fix
[SF918G+/SF1008SE+] fix time set in deep standby mode
[GM7162] added 3rd tuner detection
[ALL] force reboot for 7162 ( also 990 & ipboxes but not tested )
[ALL] added paths list preserve for RecPaths
[UFS910] remove SU2 fix
[ALL] added oscam logs info in InfoCenter - required disabled authorization to http and access to local host
[ALL] Add HDMI CEC on/off, default OFF, work only with SF1028/SF1008+/SF918+/UFS912
[ADB] fix twin-tuner
[UFS912] add support for mtd5 - now all flash space is using
[ALL] fix missing lib for grab
[ADB] Add BSKA fan support
[ALL] fix TTX
---> Nv3 changes
[ALL] fix for channels list picons located on external media like /hdd , /usb
[ALL] SecondEvent in channel list speedup
[9900] Boot Setup - fix exit key
[gm7162] added REC support on VFD
[ADB] add support STV090x tuner
[GM7162] fix power led off after boot from deepstadby
[ALL] fix GS if timezone not selected
[ADB] fix cec
[ALL] fix mount /hdd for recording
[ADB] Add autodetect boxtype
[ADB] Fix BXZB support
[ALL] Info Center: added info for /movie folder if device is different then mounted to /hdd
[ALL] fix utf8 characters in cifs
[ADB] add BZZB support
[ALL] Add converter *.pyc to *.pyo
[GM7162] fix display "9" and "+" on vfd
[ALL] added manual time shift for deepstandby if not match - file: /var/config/time.corr
[ALL] added Permanent TimeShift - default : disabled (BP->System) test mode
[ADB] fix avs error
[ADB] add support CA1 tda8004
[ALL] YouTube players remover from BP menu
[ALL] InfoCenter - Oscam logs in new windows
[ALL] InfoCenter - added USB drive model information
[ALL] new method for CAM starting
[BP] added picons for 13E & Astra19E
[ALL] EMU Manager 1.1.3: added switches: Map CA and autorestart CAM
[ALL] improve stability
Special THX to TDT
FTP login: root, passwd: pkteam
http://ulozto.cz/x3j4fNT/gm990-git-4463 ... -p0211-rar
ZGEMMA H7S , DISECQ MOTOR 52,5E-30W
-
- Pokročilý
- Příspěvky: 117
- Registrován: 02.září 2007 - 15:09
- satelitni prijimac: VU+
- Bydliště: Chomutov
- Kontaktovat uživatele:
Re: AMIKO SHD 8900 ALIEN+ARGUS PINGULUS+GM990 / DOWNLOAD
enigma2-plugin-archivczsk_0.61_sh4.ipk
Testuji na Pinguluxu Enigma PKT v2
zatím frčí perfekt.
Přeji hodně zábavy.
Testuji na Pinguluxu Enigma PKT v2
zatím frčí perfekt.
Přeji hodně zábavy.
Nemáte oprávnění prohlížet přiložené soubory.
MULTIFEED 13E - 19,2E- 23,5E-28,2E ----server on ubuntu-13.04-server-i386-Argolis SmarGo SmartReader Plus, přijímač: Vu Zero-OpenPli 4, Vu Zero 4k - Vti ,Axas His 4K Combo-openATV
Re: AMIKO SHD 8900 ALIEN+ARGUS PINGULUS+GM990 / DOWNLOAD
Picony na Spark .jpg 206x124 a Dreambox .png 100x60 (vhodne na prekonvertovanie napr. cez Zoner 11)
Nemáte oprávnění prohlížet přiložené soubory.
-
- Znalec fóra
- Příspěvky: 577
- Registrován: 17.květen 2009 - 13:39
- satelitni prijimac: Optibox 8750 HDCICX
- Bydliště: Vysočina
- Kontaktovat uživatele:
Re: AMIKO SHD 8900 ALIEN+ARGUS PINGULUS+GM990 / DOWNLOAD
All_emu_plugin_Alien_16.07.2012
- new version of Oscamd.sh4 (svn 7180 )
- new config enhancement ( nice = 15 )
- new skin for Oscam WebIF
- new plugin e2upgrade
- new version for MCAS 1.0.10
- new plugin WLTool
- new version of Oscamd.sh4 (svn 7180 )
- new config enhancement ( nice = 15 )
- new skin for Oscam WebIF
- new plugin e2upgrade
- new version for MCAS 1.0.10
- new plugin WLTool
Nemáte oprávnění prohlížet přiložené soubory.
VU+ Solo2, Gigablue quad plus, Formuler F4 turbo combo - vše doscam 0.25, OpenATV 6.3, Optibox 8750 HDCICX-newcamd, MULTIBEAM 85 (13E, 19,2E, 23,5E, 28,2E), 4x INVERTO Quatro LNB 0,2dB, 4x DiseqC DSC-304D 4x1, Skylink ICE 0624
-
- Znalec fóra
- Příspěvky: 577
- Registrován: 17.květen 2009 - 13:39
- satelitni prijimac: Optibox 8750 HDCICX
- Bydliště: Vysočina
- Kontaktovat uživatele:
Re: AMIKO SHD 8900 ALIEN+ARGUS PINGULUS+GM990 / DOWNLOAD
oscam-7698-smartreader-webif-amino-sh4-linux-cz
Nemáte oprávnění prohlížet přiložené soubory.
VU+ Solo2, Gigablue quad plus, Formuler F4 turbo combo - vše doscam 0.25, OpenATV 6.3, Optibox 8750 HDCICX-newcamd, MULTIBEAM 85 (13E, 19,2E, 23,5E, 28,2E), 4x INVERTO Quatro LNB 0,2dB, 4x DiseqC DSC-304D 4x1, Skylink ICE 0624
-
- Pokročilý
- Příspěvky: 117
- Registrován: 02.září 2007 - 15:09
- satelitni prijimac: VU+
- Bydliště: Chomutov
- Kontaktovat uživatele:
Re: AMIKO SHD 8900 ALIEN+ARGUS PINGULUS+GM990 / DOWNLOAD
http://www.sat-ulc.eu/local_links.php?c ... kid=198395
PKT GM990 NEBULA v3 image - "GIT-4527" "SVN-1873"
Neues Image für Boxen die Probleme mit dem neuen Kernel stm24-211 haben. Basierend auf dem SH4 Duckbox Projekt GIT-4527.
Zitat:
Enigma2 OpenSource SH4 Duckbox Project GIT-4527 PKT SVN-1873 NEBULA v3 Image
Support receiver: GM990
Kernel stm24-207
Altes Changelog:
Zitat:
Added by sh4 Duckbox Team:
- update pngquant version 1.1
- [p191] clear all buffers on demux error
- Fix SCART output for stx7111 chips
- [E2] fix for largefile Support
- [player2_191] reset TSM when tsm is in idle mode
- update jfsutils version 1.1.15
- update libungif version 4.1.4
- [e2proc] adding more compatibility for 3dmode
- [player_191] ufs910 fix ca recording bug (camrouting)
- [e2proc] new entry hdmi/output allowing switchin output on off by proc
- fix ffmpeg patch
- add vfd scrolling to hs7810a
- [autofs] update to version 4.1.4 supporting ghost mode
- [stmfb_102] fix hdmi hotplug error
- Add dual frontends for ADB_BOX
- [palyer191] add pcm delay support
- [HS7110] optimize st-merger
- update busybox 1.20.2
- update ffmpeg 0.11.1
- [starci] rework module detection handling
- [ufs9xx_cic] rework module detection handling
- [cimax] rework module detection handling
---> Nv3 changes
- fix spark7162 driver by DboxOldie
- [libeplayer3] fix free memleak on flv streams (myvideo)
- [tuxtxt] fix transparent mode
- cleanup ci/ca dev creation handling
- fix spark7162 SIG and SNR dvb-s or dvb-t by dboxoldie
Added by PKT:
[ALL] refresh channel list without restart GUI
[ALL] add support oscam as card server
[ALL] add startup to standby function in BP->System->Standby Tools
[ALL] add new Infocenter screen
[ALL] EPG recovery fix
[ALL] NIM selection adjust for 3 positions
[ALL] added support for mini VFD in progress
[GM7162] mini VFD configuration data for startup
[gm7162] main loop:
+ clear vfd in deepstandby
+ support vfd & led settings in standby
+ fix extinguishing
[ALL] fix lightUp
[GM7162] added FP plugin settings support
[ALL] Graph MultiEPG - added searching of picons on /hdd/picon
[GM7162] set the turn off power led when starts from deep standby
[ALL] KeyMapper extensions for red & yellow key
[ALL] fix NES on startup when LNB not connected
[ALL] fix preserve spaces in text of startup from standby mode
[ALL] fix possibility of NES in startup of radio channel
[GM7162] fix setting power led in TV mode
[ALL] fix GS in instant record sometimes appears if TIMER conflicts
[ALL] added subtitles support to Media Player - TXT files with time stamp & frame stamp.
[ALL] MediaPlayer added SRT txt format , added txt speed regulation up/down key, and many more changes.
[ALL] MediaPlayer: added in srt files detection uft8 format and other fixes
[ALL] MediaPlayer:
+ fix playlist playing
+ fix FPS detection
+ fix text delay
+ added adjustment of text speed
+ fix text startup synchro
[ALL] AudioSelection screen fix - sometimes on 1st start of AudioSelection, the screen contained only empty lines.
[E2] remove SimpleBitrate
[ALL] added new skin PKT Red-HD
[ALL] added EPG key support for MultiEPG
[ALL] SD skin replace by PKT_BasicHD
[ALL] set default skin to PKTRedHD
[ALL] update WebInterface v1.7.1
[GM7162] Volume +/- key functionality fix
[SF918G+/SF1008SE+] fix time set in deep standby mode
[GM7162] added 3rd tuner detection
[ALL] force reboot for 7162 ( also 990 & ipboxes but not tested )
[ALL] added paths list preserve for RecPaths
[UFS910] remove SU2 fix
[ALL] added oscam logs info in InfoCenter - required disabled authorization to http and access to local host
[ALL] Add HDMI CEC on/off, default OFF, work only with SF1028/SF1008+/SF918+/UFS912
[ADB] fix twin-tuner
[UFS912] add support for mtd5 - now all flash space is using
[ALL] fix missing lib for grab
[ADB] Add BSKA fan support
[ALL] fix TTX
---> Nv3 changes
[ALL] fix for channels list picons located on external media like /hdd , /usb
[ALL] SecondEvent in channel list speedup
[9900] Boot Setup - fix exit key
[gm7162] added REC support on VFD
[ADB] add support STV090x tuner
[GM7162] fix power led off after boot from deepstadby
[ALL] fix GS if timezone not selected
[ADB] fix cec
[ALL] fix mount /hdd for recording
[ADB] Add autodetect boxtype
[ADB] Fix BXZB support
[ALL] Info Center: added info for /movie folder if device is different then mounted to /hdd
[ALL] fix utf8 characters in cifs
[ADB] add BZZB support
[ALL] Add converter *.pyc to *.pyo
[GM7162] fix display "9" and "+" on vfd
[ALL] added manual time shift for deepstandby if not match - file: /var/config/time.corr
[ALL] added Permanent TimeShift - default : disabled (BP->System) test mode
[ADB] fix avs error
[ADB] add support CA1 tda8004
[ALL] YouTube players remover from BP menu
[ALL] InfoCenter - Oscam logs in new windows
[ALL] InfoCenter - added USB drive model information
[ALL] new method for CAM starting
[BP] added picons for 13E & Astra19E
[ALL] EMU Manager 1.1.3: added switches: Map CA and autorestart CAM
[ALL] improve stability
Special THX to TDT
FTP login: root, passwd: pkteam
Regards
Polish Koders Team
PKT GM990 NEBULA v3 image - "GIT-4527" "SVN-1873"
Neues Image für Boxen die Probleme mit dem neuen Kernel stm24-211 haben. Basierend auf dem SH4 Duckbox Projekt GIT-4527.
Zitat:
Enigma2 OpenSource SH4 Duckbox Project GIT-4527 PKT SVN-1873 NEBULA v3 Image
Support receiver: GM990
Kernel stm24-207
Altes Changelog:
Zitat:
Added by sh4 Duckbox Team:
- update pngquant version 1.1
- [p191] clear all buffers on demux error
- Fix SCART output for stx7111 chips
- [E2] fix for largefile Support
- [player2_191] reset TSM when tsm is in idle mode
- update jfsutils version 1.1.15
- update libungif version 4.1.4
- [e2proc] adding more compatibility for 3dmode
- [player_191] ufs910 fix ca recording bug (camrouting)
- [e2proc] new entry hdmi/output allowing switchin output on off by proc
- fix ffmpeg patch
- add vfd scrolling to hs7810a
- [autofs] update to version 4.1.4 supporting ghost mode
- [stmfb_102] fix hdmi hotplug error
- Add dual frontends for ADB_BOX
- [palyer191] add pcm delay support
- [HS7110] optimize st-merger
- update busybox 1.20.2
- update ffmpeg 0.11.1
- [starci] rework module detection handling
- [ufs9xx_cic] rework module detection handling
- [cimax] rework module detection handling
---> Nv3 changes
- fix spark7162 driver by DboxOldie
- [libeplayer3] fix free memleak on flv streams (myvideo)
- [tuxtxt] fix transparent mode
- cleanup ci/ca dev creation handling
- fix spark7162 SIG and SNR dvb-s or dvb-t by dboxoldie
Added by PKT:
[ALL] refresh channel list without restart GUI
[ALL] add support oscam as card server
[ALL] add startup to standby function in BP->System->Standby Tools
[ALL] add new Infocenter screen
[ALL] EPG recovery fix
[ALL] NIM selection adjust for 3 positions
[ALL] added support for mini VFD in progress
[GM7162] mini VFD configuration data for startup
[gm7162] main loop:
+ clear vfd in deepstandby
+ support vfd & led settings in standby
+ fix extinguishing
[ALL] fix lightUp
[GM7162] added FP plugin settings support
[ALL] Graph MultiEPG - added searching of picons on /hdd/picon
[GM7162] set the turn off power led when starts from deep standby
[ALL] KeyMapper extensions for red & yellow key
[ALL] fix NES on startup when LNB not connected
[ALL] fix preserve spaces in text of startup from standby mode
[ALL] fix possibility of NES in startup of radio channel
[GM7162] fix setting power led in TV mode
[ALL] fix GS in instant record sometimes appears if TIMER conflicts
[ALL] added subtitles support to Media Player - TXT files with time stamp & frame stamp.
[ALL] MediaPlayer added SRT txt format , added txt speed regulation up/down key, and many more changes.
[ALL] MediaPlayer: added in srt files detection uft8 format and other fixes
[ALL] MediaPlayer:
+ fix playlist playing
+ fix FPS detection
+ fix text delay
+ added adjustment of text speed
+ fix text startup synchro
[ALL] AudioSelection screen fix - sometimes on 1st start of AudioSelection, the screen contained only empty lines.
[E2] remove SimpleBitrate
[ALL] added new skin PKT Red-HD
[ALL] added EPG key support for MultiEPG
[ALL] SD skin replace by PKT_BasicHD
[ALL] set default skin to PKTRedHD
[ALL] update WebInterface v1.7.1
[GM7162] Volume +/- key functionality fix
[SF918G+/SF1008SE+] fix time set in deep standby mode
[GM7162] added 3rd tuner detection
[ALL] force reboot for 7162 ( also 990 & ipboxes but not tested )
[ALL] added paths list preserve for RecPaths
[UFS910] remove SU2 fix
[ALL] added oscam logs info in InfoCenter - required disabled authorization to http and access to local host
[ALL] Add HDMI CEC on/off, default OFF, work only with SF1028/SF1008+/SF918+/UFS912
[ADB] fix twin-tuner
[UFS912] add support for mtd5 - now all flash space is using
[ALL] fix missing lib for grab
[ADB] Add BSKA fan support
[ALL] fix TTX
---> Nv3 changes
[ALL] fix for channels list picons located on external media like /hdd , /usb
[ALL] SecondEvent in channel list speedup
[9900] Boot Setup - fix exit key
[gm7162] added REC support on VFD
[ADB] add support STV090x tuner
[GM7162] fix power led off after boot from deepstadby
[ALL] fix GS if timezone not selected
[ADB] fix cec
[ALL] fix mount /hdd for recording
[ADB] Add autodetect boxtype
[ADB] Fix BXZB support
[ALL] Info Center: added info for /movie folder if device is different then mounted to /hdd
[ALL] fix utf8 characters in cifs
[ADB] add BZZB support
[ALL] Add converter *.pyc to *.pyo
[GM7162] fix display "9" and "+" on vfd
[ALL] added manual time shift for deepstandby if not match - file: /var/config/time.corr
[ALL] added Permanent TimeShift - default : disabled (BP->System) test mode
[ADB] fix avs error
[ADB] add support CA1 tda8004
[ALL] YouTube players remover from BP menu
[ALL] InfoCenter - Oscam logs in new windows
[ALL] InfoCenter - added USB drive model information
[ALL] new method for CAM starting
[BP] added picons for 13E & Astra19E
[ALL] EMU Manager 1.1.3: added switches: Map CA and autorestart CAM
[ALL] improve stability
Special THX to TDT
FTP login: root, passwd: pkteam
Regards
Polish Koders Team
MULTIFEED 13E - 19,2E- 23,5E-28,2E ----server on ubuntu-13.04-server-i386-Argolis SmarGo SmartReader Plus, přijímač: Vu Zero-OpenPli 4, Vu Zero 4k - Vti ,Axas His 4K Combo-openATV
Re: AMIKO SHD 8900 ALIEN+ARGUS PINGULUS+GM990 / DOWNLOAD
Plugin TSmedia 1.6_1.8 all
V krátkom teste som sa zatiaľ nenapojil na žiadnu tv, you tube funguje výborne.
Testované v pkt Hyoerion.
V krátkom teste som sa zatiaľ nenapojil na žiadnu tv, you tube funguje výborne.
Testované v pkt Hyoerion.
Nemáte oprávnění prohlížet přiložené soubory.
Bežný užívateľ
~*uClan USTYM 4K PRO TWIN *Openbox AS4K CI*Amiko Alien A3 Combo*~
***Emme Esse 100cm - 85°E~30°W, Maximum e85***
~*uClan USTYM 4K PRO TWIN *Openbox AS4K CI*Amiko Alien A3 Combo*~
***Emme Esse 100cm - 85°E~30°W, Maximum e85***
Re: AMIKO SHD 8900 ALIEN+ARGUS PINGULUS+GM990 / DOWNLOAD
http://ulozto.sk/xYNf8LQT/pkt-gm990-e2- ... lash-1-zip idze jak kula) E2 OpenSource SH4 Duckbox Project GIT-5487 PKT SVN-2290 HYPERION v2 Image
Added by PKT:
[ALL] OpenPLI updated 10-05-2013
[ALL] python2.7 updated
[ARM] fix firmware update from BP
[ARM] fix subtitles
[ALL] add PKT HDMI-CEC Manager [BP->Settings->HDMI Setup]
[ALL] fix making & cleaning devs for pl2303 & ftdi
[ALL] speedup network test
[ARM] enable automount support
[ARM] add missing libs for mytube
[ALL] add HDD Manager to BP-> Disk Menu
[ALL] Partition Manager to BP-> Disk Menu
[ALL] optimize SWAP script
[ALL] fix SWAP start on box with NAND Image
[ALL] update main menu
[ALL] add DLNA client support menu
[ARM] Add missing rtmpdump for WebMedia 10 and other
[ALL] default PIG on exclude ADB
{ALL} IPTV GS fix for ChannelList
[ALL] skip network check in first assistant
[ipbox] add loading RF modulator in rcS if exists
[ADB] fix autorestore
{ALL} removed unsupported Nonlinear format from AspectRatio
[ALL] fix EPG multifunctioning
[ALL] fix Channel Control plugin support
{7162} fix V.Format key for aspect ratio selection
{ALL} fix python 2.7 plugins import from PKTs server
[ALL] fix map ca0 to ca1
{ALL} standby on/off switching speedup & other internal code changes
{ALL} force reboot function deactivated cause doesn't work so far
[SF918,SF1028] Enable extinguish
[ALL] set default OFF hdmicec function: tv_standby, tv_wakeup, active_menu, active_source
[ALL] fix OpenWebif streaming
[GM7162] add switch between DVB-T/C @BP->Settings->Extra Setup
[ALL] according to @data devil - added additional key info in locations: EPGSelectActions ChannelSelectEPGActions
{ALL} added TELETEXT support in KeyMapper : available for red & yellow color keys
[ARM] Add CrossEPG
[arm] add missing libs
{ARM} fix graphEPG fonts for other skins
[ALL] update channel list
[ALL] update djcrash downloader v1.3.0
- add checking server response
- add update local date field after installation
[ALL] update PKT Samba Server Manager v1.5
- add support for Hypercube
- add some new entry to smb.conf
[ALL] update Media player
-set /hdd as default browsing dir
-set config.mediaplayer.defaultDir=/media/
-functionality fixes
- added dynamic OC
[ALL] update EmuManager v1.1.7
-add properly support of wicardd
{ALL} update BluePanel
- speed up
- optimized code
- small fixes
- num & color keys small functionality fix
- exit key fix
- added boxtype exclude
[ALL] add Overclocking Tool v2.0.8
- add management over/down clocking
- add checking oc driver
- add error message when oc driver is not available
- add downclocking CPU in standby support
- enable Fast Boot support
- add lock/unlock button
- add WARNING message
- add Dynamic OC
- add frequency self calculating algorithm to increase available range of values
- add CPU dynamic frequency control in standby mode when recording
{ALL} InfoCenter
-added CPU frequency read online.
-added Net IP
[ALL] update PKT Install Manager v2.7.7
- add support for Hypercube
- add support MultiBoot for GM 990/GM TRIPLEX STB
- fixed exit from Disk Manager
- fix switch between multiboot<->nand_e2
- fix switch between multiboot<->nand_spark
- add Mario Bros cleaning tool
- add additional boot_system check
- set default bootdelay at 10s for gm990
- add reboot button
- add show mounted partition
- add support ext4 file system
- increase choice of size partition from 10GB to 1TB
- add size of left free space
- add excluded extended partition id
- speed up loading install manager & all code in python
- add info when disk or image file is not detected
- add lock installation when disk or image file is not detected
- fix usb and usbhub loading when more than 1 storage device are connected to the STB
- add multiboot for Hypercube
Conditions:
- FAT partition is using for kernels area
- sdx2, sdx3, etc... is using for rootfs
- correctly usb drive partitions can be prepare by Disk manager
- fix refresh status on hypercube
- fix rescan devices after repartition in Disk Manager
- fix detect image to install [hypercube]
- add alternative startup from flash when usb storage can not be initialize [hypercube]
- code optimization
[ALL] Update Backup Manager v2.2
- add support for Hypercube
- add full backup of flash for GM990 / TRIPLEX/ Hypercube
- fix checking free space in /hdd
- set copy settings default off
- add copy of channel list revision
- add selection usb or flash image in whole image backup
Known Issues:
[ADB] PIG can cause unexpected uboot remove due to error decoder design - as written by Jacek
We are working around this problem and some changes in this direction have been made, however we can not guarantee 100% secure
[TRIPLEX] for oscam use boxtype=ipbox
[ALL] we not recommended make backup of e2 settings when using Backup Manager from older version!
Special THX to TDT group, all sh4 community and all betatesters.
FTP login: root, passwd: pkteam
Regards
Polish Koders Team
Added by PKT:
[ALL] OpenPLI updated 10-05-2013
[ALL] python2.7 updated
[ARM] fix firmware update from BP
[ARM] fix subtitles
[ALL] add PKT HDMI-CEC Manager [BP->Settings->HDMI Setup]
[ALL] fix making & cleaning devs for pl2303 & ftdi
[ALL] speedup network test
[ARM] enable automount support
[ARM] add missing libs for mytube
[ALL] add HDD Manager to BP-> Disk Menu
[ALL] Partition Manager to BP-> Disk Menu
[ALL] optimize SWAP script
[ALL] fix SWAP start on box with NAND Image
[ALL] update main menu
[ALL] add DLNA client support menu
[ARM] Add missing rtmpdump for WebMedia 10 and other
[ALL] default PIG on exclude ADB
{ALL} IPTV GS fix for ChannelList
[ALL] skip network check in first assistant
[ipbox] add loading RF modulator in rcS if exists
[ADB] fix autorestore
{ALL} removed unsupported Nonlinear format from AspectRatio
[ALL] fix EPG multifunctioning
[ALL] fix Channel Control plugin support
{7162} fix V.Format key for aspect ratio selection
{ALL} fix python 2.7 plugins import from PKTs server
[ALL] fix map ca0 to ca1
{ALL} standby on/off switching speedup & other internal code changes
{ALL} force reboot function deactivated cause doesn't work so far
[SF918,SF1028] Enable extinguish
[ALL] set default OFF hdmicec function: tv_standby, tv_wakeup, active_menu, active_source
[ALL] fix OpenWebif streaming
[GM7162] add switch between DVB-T/C @BP->Settings->Extra Setup
[ALL] according to @data devil - added additional key info in locations: EPGSelectActions ChannelSelectEPGActions
{ALL} added TELETEXT support in KeyMapper : available for red & yellow color keys
[ARM] Add CrossEPG
[arm] add missing libs
{ARM} fix graphEPG fonts for other skins
[ALL] update channel list
[ALL] update djcrash downloader v1.3.0
- add checking server response
- add update local date field after installation
[ALL] update PKT Samba Server Manager v1.5
- add support for Hypercube
- add some new entry to smb.conf
[ALL] update Media player
-set /hdd as default browsing dir
-set config.mediaplayer.defaultDir=/media/
-functionality fixes
- added dynamic OC
[ALL] update EmuManager v1.1.7
-add properly support of wicardd
{ALL} update BluePanel
- speed up
- optimized code
- small fixes
- num & color keys small functionality fix
- exit key fix
- added boxtype exclude
[ALL] add Overclocking Tool v2.0.8
- add management over/down clocking
- add checking oc driver
- add error message when oc driver is not available
- add downclocking CPU in standby support
- enable Fast Boot support
- add lock/unlock button
- add WARNING message
- add Dynamic OC
- add frequency self calculating algorithm to increase available range of values
- add CPU dynamic frequency control in standby mode when recording
{ALL} InfoCenter
-added CPU frequency read online.
-added Net IP
[ALL] update PKT Install Manager v2.7.7
- add support for Hypercube
- add support MultiBoot for GM 990/GM TRIPLEX STB
- fixed exit from Disk Manager
- fix switch between multiboot<->nand_e2
- fix switch between multiboot<->nand_spark
- add Mario Bros cleaning tool
- add additional boot_system check
- set default bootdelay at 10s for gm990
- add reboot button
- add show mounted partition
- add support ext4 file system
- increase choice of size partition from 10GB to 1TB
- add size of left free space
- add excluded extended partition id
- speed up loading install manager & all code in python
- add info when disk or image file is not detected
- add lock installation when disk or image file is not detected
- fix usb and usbhub loading when more than 1 storage device are connected to the STB
- add multiboot for Hypercube
Conditions:
- FAT partition is using for kernels area
- sdx2, sdx3, etc... is using for rootfs
- correctly usb drive partitions can be prepare by Disk manager
- fix refresh status on hypercube
- fix rescan devices after repartition in Disk Manager
- fix detect image to install [hypercube]
- add alternative startup from flash when usb storage can not be initialize [hypercube]
- code optimization
[ALL] Update Backup Manager v2.2
- add support for Hypercube
- add full backup of flash for GM990 / TRIPLEX/ Hypercube
- fix checking free space in /hdd
- set copy settings default off
- add copy of channel list revision
- add selection usb or flash image in whole image backup
Known Issues:
[ADB] PIG can cause unexpected uboot remove due to error decoder design - as written by Jacek
We are working around this problem and some changes in this direction have been made, however we can not guarantee 100% secure
[TRIPLEX] for oscam use boxtype=ipbox
[ALL] we not recommended make backup of e2 settings when using Backup Manager from older version!
Special THX to TDT group, all sh4 community and all betatesters.
FTP login: root, passwd: pkteam
Regards
Polish Koders Team
-
- Pokročilý
- Příspěvky: 117
- Registrován: 02.září 2007 - 15:09
- satelitni prijimac: VU+
- Bydliště: Chomutov
- Kontaktovat uživatele:
Re: AMIKO SHD 8900 ALIEN+ARGUS PINGULUS+GM990 / DOWNLOAD
PKT Hyperion V3
Added by PKT:
[ALL SH4] add 6xPOWER = force reboot
[MIPS] add SWAP support (default off)
[arm] add djmount
[ALL] update channel list
[MIPS] start wizard fixes
[ALL] EmuManager fix GS if CAM removed;
[HyperCube] set recording path to /hdd/movie
[MIPS] IMDb visibility added to plugin browser
[LX] set default yellow as Plugin browser
[LX] fix vfd info in movie player
[MIPS] fix restart CCcam with GUI restart
[MIPS] fix Aspect Selection
[MIPS] added Infobar show on EXIT key pressed
[LX] keymap - added aspect ratio switch to PLUGIN key
[LX] fix Audio Selection
[LX] fix a/v video mode
[all] update backup manager translation
[HC * IPBox] BootSetup and Install Manager fixes
[ALL] Emu Manager - fix for to long name of Cam file
[MIPS] fix info play reminding on front panel in Media Player
[ARM] fix EPG saving/loading
[sh4] fix start script file every restart GUI
[MIPS] VideoWizard fix, default setting changes, fix of FPanel channel number displaying
[mips] add support for samba setup manager
[ALL] fix GS if streaming
[gm990] added PORTAL key to keymap
[ALL] Log raport
[mips] fix autorestore if is usb or hdd
[ALL] DLNA added ARM & MIPSEL support
[MIPS] InfoCenter code optimization
[MIPS] added CCCam info to InfoBar;
[MIPS] add dvb-t firmware
[mips] Media Player - better functionality changes
[mips] Media Player color keys functionality
[ALL] ScreenSaver smooth fading
[ALL] EMUmanager add support CCcamd
[mips] + crossepg
[mips] deppstandby plugin fix, dump mem at awaking
[MIPS] VM settings, save epg on standby, reference.dat ...
[mips] timeshift fix & others
[ALL] picons update
[mips] fix infobar/eventview show/hide
[mips] pig resized
[IP9k] add BootPlus
[ADB] add RC_Select plugin for RAW/CUT/XMP remote control select
[ALL] fix transponder info
[ALL] fix aio-grab
[ALL] PKT skins - added channel name in nr zap
[ALL] added: auto switch to standby if restarted in standby mode
[ALL] added picons path selection in skin setup : default, hdd, usb, enigma. So if you do not want to awake your hdd, just choose usb or enigma and enjoy
[GM990,GM7162] improved remote control sensitivity
[ALL] Channel Control - german lang by @data devil
[ALL] PKT SKINS - All rights reserver. Skin is integral part of PKTeam image and is not allowed to modify and use it without permission of the author.
[ALL] added StartUp to standby in DeepStandby plugin
[ALL] added PIG in movie selection ( SilverHD & RedHD skin )
[ALL] MediaPlayer fixes, added external txt/srt file support, other small addons
[7162] AGC fix
[all] fix sleep hard disk - based on data devil solution
[ALL] OC Tool - modified fast boot.
[7162] OC Tool - added 720MHz to fast boot
[ALL] Speed Tool - GUI changes, added Polish translation
[ALL] added to EPG key support for Cool TV Guide
[ALL] fixed stopping countdown for deep standby if awake + other small changes for triplex
[ALL] removed containers usage in bitrate info for smoother operation
[ALL] Deep Standby fix
[99xx] Fan Control fix
[7162] VFD icon fix
[ALL] no swap needed if crossepg not in use
[ALL] added saving EPG data file on standby
[ALL] changed virtual memory management
[ALL] add switching between eplayer/gstreamer BP>Settings>ExtraSetup>MediaFramework (experimental)
[ALL] EMUmanager fix gs when cam is incorrect
[ALL] InfoCenter - added partition filesystem info
[ALL] GS in awaiking from standby fix - getoutput issue.
[ALL] extended cache writeback delay
[ALL] EMUmanager- fix emu counter
[ALL] increased efficiency of swap file
[ALL] added clean up memory function in BP
[ALL] swap usage less aggressive. Pressure on RAM, and if insufficient then swapping.
[ALL] other smaller code changes
[ALL] sync front panel clock display in standby fix
[arm] add autorestore for arm based on sh4
[ALL] fix value OC on sti7100 and sti7109
[IPBOX99X] - added new patches for frontend driver to increase stability
[ALL] many stability fixes no included in changelog
Known Issues:
[ADB] PIG can cause unexpected uboot remove due to error decoder design - as written by Jacek, so we can not guarantee 100% secure
Special THX to TDT, OpenPLI, all sh4 community and all betatesters.
Extra THX goto data devil
FTP login: root, passwd: pkteam
Regards
Pozdrawiamy Polish Koders Team
http://www.sendspace.com/file/5ge1ae
Added by PKT:
[ALL SH4] add 6xPOWER = force reboot
[MIPS] add SWAP support (default off)
[arm] add djmount
[ALL] update channel list
[MIPS] start wizard fixes
[ALL] EmuManager fix GS if CAM removed;
[HyperCube] set recording path to /hdd/movie
[MIPS] IMDb visibility added to plugin browser
[LX] set default yellow as Plugin browser
[LX] fix vfd info in movie player
[MIPS] fix restart CCcam with GUI restart
[MIPS] fix Aspect Selection
[MIPS] added Infobar show on EXIT key pressed
[LX] keymap - added aspect ratio switch to PLUGIN key
[LX] fix Audio Selection
[LX] fix a/v video mode
[all] update backup manager translation
[HC * IPBox] BootSetup and Install Manager fixes
[ALL] Emu Manager - fix for to long name of Cam file
[MIPS] fix info play reminding on front panel in Media Player
[ARM] fix EPG saving/loading
[sh4] fix start script file every restart GUI
[MIPS] VideoWizard fix, default setting changes, fix of FPanel channel number displaying
[mips] add support for samba setup manager
[ALL] fix GS if streaming
[gm990] added PORTAL key to keymap
[ALL] Log raport
[mips] fix autorestore if is usb or hdd
[ALL] DLNA added ARM & MIPSEL support
[MIPS] InfoCenter code optimization
[MIPS] added CCCam info to InfoBar;
[MIPS] add dvb-t firmware
[mips] Media Player - better functionality changes
[mips] Media Player color keys functionality
[ALL] ScreenSaver smooth fading
[ALL] EMUmanager add support CCcamd
[mips] + crossepg
[mips] deppstandby plugin fix, dump mem at awaking
[MIPS] VM settings, save epg on standby, reference.dat ...
[mips] timeshift fix & others
[ALL] picons update
[mips] fix infobar/eventview show/hide
[mips] pig resized
[IP9k] add BootPlus
[ADB] add RC_Select plugin for RAW/CUT/XMP remote control select
[ALL] fix transponder info
[ALL] fix aio-grab
[ALL] PKT skins - added channel name in nr zap
[ALL] added: auto switch to standby if restarted in standby mode
[ALL] added picons path selection in skin setup : default, hdd, usb, enigma. So if you do not want to awake your hdd, just choose usb or enigma and enjoy
[GM990,GM7162] improved remote control sensitivity
[ALL] Channel Control - german lang by @data devil
[ALL] PKT SKINS - All rights reserver. Skin is integral part of PKTeam image and is not allowed to modify and use it without permission of the author.
[ALL] added StartUp to standby in DeepStandby plugin
[ALL] added PIG in movie selection ( SilverHD & RedHD skin )
[ALL] MediaPlayer fixes, added external txt/srt file support, other small addons
[7162] AGC fix
[all] fix sleep hard disk - based on data devil solution
[ALL] OC Tool - modified fast boot.
[7162] OC Tool - added 720MHz to fast boot
[ALL] Speed Tool - GUI changes, added Polish translation
[ALL] added to EPG key support for Cool TV Guide
[ALL] fixed stopping countdown for deep standby if awake + other small changes for triplex
[ALL] removed containers usage in bitrate info for smoother operation
[ALL] Deep Standby fix
[99xx] Fan Control fix
[7162] VFD icon fix
[ALL] no swap needed if crossepg not in use
[ALL] added saving EPG data file on standby
[ALL] changed virtual memory management
[ALL] add switching between eplayer/gstreamer BP>Settings>ExtraSetup>MediaFramework (experimental)
[ALL] EMUmanager fix gs when cam is incorrect
[ALL] InfoCenter - added partition filesystem info
[ALL] GS in awaiking from standby fix - getoutput issue.
[ALL] extended cache writeback delay
[ALL] EMUmanager- fix emu counter
[ALL] increased efficiency of swap file
[ALL] added clean up memory function in BP
[ALL] swap usage less aggressive. Pressure on RAM, and if insufficient then swapping.
[ALL] other smaller code changes
[ALL] sync front panel clock display in standby fix
[arm] add autorestore for arm based on sh4
[ALL] fix value OC on sti7100 and sti7109
[IPBOX99X] - added new patches for frontend driver to increase stability
[ALL] many stability fixes no included in changelog
Known Issues:
[ADB] PIG can cause unexpected uboot remove due to error decoder design - as written by Jacek, so we can not guarantee 100% secure
Special THX to TDT, OpenPLI, all sh4 community and all betatesters.
Extra THX goto data devil
FTP login: root, passwd: pkteam
Regards
Pozdrawiamy Polish Koders Team
http://www.sendspace.com/file/5ge1ae
MULTIFEED 13E - 19,2E- 23,5E-28,2E ----server on ubuntu-13.04-server-i386-Argolis SmarGo SmartReader Plus, přijímač: Vu Zero-OpenPli 4, Vu Zero 4k - Vti ,Axas His 4K Combo-openATV