oscam problem hdbox 9105 pvr bez pluska

[AifeL123]

Ahoj
chtel bych vas poprosit o pomoc. vcera jsem si poridil HD-BOX FS-9105 PVR (drive jsem pouzival dm500s) nahral jsem oscam r8972 ,fw jsem tam nahral FAC.HD BOX.FS9105HDPVR.v2.12.15_new enigma2 jsem hledal ale nenasel funkcni vzdy mi box hlasil chybu error90 a nebo 91
chtel jsem se pripojit jako client ale toto mi to vypisuje

Kód: Vybrat vše

2015/10/13 12:44:33 5CA7C0 c dvbapi: overtake: clear pid: 0 
2015/10/13 12:44:33 5CA7C0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids! 
2015/10/13 12:44:33 5CA7C0 c [DVBAPI] Demuxer #0 impossible to descramble PID #0 CAID 0D96 PROVID 000000 ECMPID 0F12 (NO MATCHING READER) 
2015/10/13 12:44:34 5CA7C0 c [DVBAPI] Demuxer #0 impossible to descramble PID #1 CAID 0624 PROVID 000000 ECMPID 0F13 (NO MATCHING READER) 
2015/10/13 12:44:34 5CA7C0 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 0666 PROVID 000000 ECMPID 005A (NO MATCHING READER) 
2015/10/13 12:44:34 5CA7C0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids! 
2015/10/13 12:44:34 5CA7C0 c [DVBAPI] Demuxer #0 impossible to descramble PID #0 CAID 0D96 PROVID 000000 ECMPID 0F12 (NO MATCHING READER) 
2015/10/13 12:44:35 5CA7C0 c [DVBAPI] Demuxer #0 impossible to descramble PID #1 CAID 0624 PROVID 000000 ECMPID 0F13 (NO MATCHING READER) 
2015/10/13 12:44:35 5CA7C0 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 0666 PROVID 000000 ECMPID 005A (NO MATCHING READER) 
2015/10/13 12:44:35 5CA7C0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids! 
2015/10/13 12:44:36 5CA7C0 c [DVBAPI] Demuxer #0 impossible to descramble PID #0 CAID 0D96 PROVID 000000 ECMPID 0F12 (NO MATCHING READER) 
2015/10/13 12:44:36 5CA7C0 c [DVBAPI] Demuxer #0 impossible to descramble PID #1 CAID 0624 PROVID 000000 ECMPID 0F13 (NO MATCHING READER) 
2015/10/13 12:44:36 5CA7C0 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 0666 PROVID 000000 ECMPID 005A (NO MATCHING READER) 
2015/10/13 12:44:37 5CA7C0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids! 
2015/10/13 12:44:37 5CA7C0 c [DVBAPI] Demuxer #0 impossible to descramble PID #0 CAID 0D96 PROVID 000000 ECMPID 0F12 (NO MATCHING READER) 
2015/10/13 12:44:37 5CA7C0 c [DVBAPI] Demuxer #0 impossible to descramble PID #1 CAID 0624 PROVID 000000 ECMPID 0F13 (NO MATCHING READER) 
2015/10/13 12:44:37 5CA7C0 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 0666 PROVID 000000 ECMPID 005A (NO MATCHING READER) 
2015/10/13 12:44:38 5CA7C0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids! 
2015/10/13 12:44:38 5CA7C0 c [DVBAPI] Demuxer #0 impossible to descramble PID #0 CAID 0D96 PROVID 000000 ECMPID 0F12 (NO MATCHING READER) 
2015/10/13 12:44:38 5CA7C0 c [DVBAPI] Demuxer #0 impossible to descramble PID #1 CAID 0624 PROVID 000000 ECMPID 0F13 (NO MATCHING READER) 
2015/10/13 12:44:38 5CA7C0 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 0666 PROVID 000000 ECMPID 005A (NO MATCHING READER) 
2015/10/13 12:44:39 5CA7C0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids! 

vedel by mi nekdo poradit co delam spatne?

snad jsem napsal vse

[k.o.h.u.t.]

Letmo ti tam chybí zadat group a services se definují v oscam.user. Podívej se i na dvbapi.

[revis]

chyba pmt . demuxer musi mat mapovane pmt , takze mas zly config na oscame.

[AifeL123]

chlapy tak rychlo a ucinou odpoved jsem necekal diky moc

[k.o.h.u.t.]

Už koukáš?

[AifeL123]

jeste se zeptam u nekterych programu mi to pise toto

Kód: Vybrat vše

2015/10/13 13:12:24 5CA7C0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids! 
2015/10/13 13:12:24 5CA7C0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding! 

nektery jedou normalne ale treba ct/d nejde vedeli by ste i stimhle rady?

[k.o.h.u.t.]

oscam.dvbapi
P: 0D96
I: 0

[AifeL123]

Už koukáš?

jj treba na novu koukam v pohode stacilo dat group 1

ale čt/d a disney chanel co jsem ted skousel nejdou pise to co sem postnul v predposlednim postu

kdyz koukam na satelit pise tam ze je to m7 group to by mel byt skylink ne?

v oscam dvbapi jsem mel toto

Kód: Vybrat vše

S: PTI pmt1_1.tmp
S: PTI pmt1_2.tmp
S: PTI pmt1_3.tmp
S: PTI pmt1_4.tmp
S: PTI1 pmt2_1.tmp
S: PTI1 pmt2_2.tmp
S: PTI1 pmt2_3.tmp
S: PTI1 pmt2_4.tmp
### Stapi Timeshift ###
S: PTI2 pmt3_1.tmp

P: 0D96 1

pripsal jsem tam od kohuta l: 0
a nic

[k.o.h.u.t.]

M7 Group je Skylink, to si oscam bere z oscam.srvid
Dej sem oscam.conf, oscam.user, oscam.dvbapi a oscam.server.

[Steiner]

...pripsal jsem tam od kohuta l: 0
a nic

ale kohut nepísal "l: 0" ale "I: 0"
.. ako Ignore

[AifeL123]

uz to diky k.o.h.u.t.ovy frci jak ma diky moc