putting these file on your box you will be able to start when your box boots choosing the image you want

about buttons...following Tideglo's choices(he is the enigma2 developer for sifteam images on ipbox hd) you can:

-pressing 1 =NFS
-pressing 2= USB (without internal hd /dev/sda1)
-pressing 3= USB (with internal hd /dev/sda1)
-pressing 4= Flash

at the next reboot you have only press the button to change images

How install them:

Quote:
-rename the file for your box in usb_update.img-send and install it following the usb modality
thx sifteam

*Note
the next firmware will have already it inside

if you want multiboot function, download attached usb_config.img.
Then press number button which you want on RCU when start up from shutdown.
Multiboot function supports as below style.

# 1 boot with CDKroot(NFS)
# 2 boot from USB memory stick, with internal HDD
# 3 original images as current flash memory
# 4 boot with NFS
# 5 boot from USB memory stick, but without internal HDD
# 6 boot from internal SATA HDD
# 7 boot from flash memory for another image

Default value : no.3

http://dgstation.co.kr/new/cs_software. ... ry=&page=1

PS:neco soudruzi v korei udelali spatne, stahnul sem 5 ruznej img a vsechny sou prazdny. snad to opravej. dam vedet