Oscam a jeho nastavenie (s popisom - testovane v E2)

[oskarcek1]

premazal som to a už to nepadá, dík

ale ešte čo to poštudujem a skúsim to celé spraviť nanovo, radšej by som to mal funkčnú vlastnú výrobu...

[jajo4546]

[joy]

Zdravim

dal som si openatv 6.1 na DM7020HD, nainstaloval oscam atv ( version 1.20-unstable_svn, build r11353 ), pripajam sa len na externy server cez newcamd525,ale nejde to. Vie niekto poradit? vdaka.

V oscam logu mam tieto riadky:

2018/02/17 22:58:19 25947944 c (ecm) jozo (0D96@000004/0000/3398/B8:A8511D996C9B3DEDC3806B6C7FBFB7B5): not found (5 ms) by Port_11555 (F/2/2/2)
2018/02/17 22:58:19 25947944 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
2018/02/17 22:58:19 00000000 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r11353 (mipsel-openpli40-linux-gnu)
2018/02/17 22:58:19 25947944 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0D96 PROVID 000004 ECMPID 1BEF ANY CHID PMTPID 1BE4 VPID 1BE5
2018/02/17 22:58:21 25947944 c (ecm) jozo (0D96@000004/0000/3398/B8:A8511D996C9B3DEDC3806B6C7FBFB7B5): not found (7 ms) by Port_11555 (F/2/2/2)
2018/02/17 22:58:21 25947944 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
2018/02/17 22:58:21 25947944 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0D96 PROVID 000004 ECMPID 1BEF ANY CHID PMTPID 1BE4 VPID 1BE5
2018/02/17 22:58:21 25947944 c (ecm) jozo (0D96@000004/0000/3398/B8:A8511D996C9B3DEDC3806B6C7FBFB7B5): not found (2 ms) by Port_11555 (F/2/2/2)

moje konfigy :

+++ oscam.conf +++
[global]
pidfile = /tmp/oscam.pid
usrfile = /tmp/oscamuser.log
logfile = /tmp/oscam.log
disablelog = 0
disableuserfile = 0
usrfileflag = 0
clienttimeout = 3000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 0
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 1
nice = -1
serialreadertimeout = 1500
maxlogsize = 20
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
readerautoloadbalance = 0
readerautoloadbalance_save = 0

[monitor]
port = 10000
nocrypt = 127.0.0.1,192.168.0.0-192.168.0.255
aulow = 120
hideclient_to = 15
monlevel = 0
appendchaninfo = 1

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = jozo
#pmt_mode = 0

[webif]
httpport = 8080
httpuser = root
httppwd = heslo
httprefresh = 5
httpallowed = 127.0.0.1,192.168.0.0-192.168.0.255
httphideidleclients = 1
httpreadonly = 0

+++oscam.server+++

[reader]
label = lower
protocol = internal
detect = CD
device = /dev/sci0
group = 1
emmcache = 1,3,2
caid = 0d96

[reader]
label = upper
protocol = internal
detect = CD
device = /dev/sci1
group = 1
emmcache = 1,3,2
caid = 0d96

# EMU for PG & PB
[reader]
label = cryptoworks
protocol = cryptoworks-sc
device = /dev/null
group = 1
caid = 0d00

[reader]
Label = Port_11555
Protocol = newcamd
Key = 0102030405060708091011121314
Device = server1,port11555
Account = xx,yy
CAID = 0d96
group = 1
fallback = 0
IDENT = 0d96:0,04,08,0c,10,24,28
ReconnectTimeout = 20

[reader]
Label = Port_11444
Protocol = newcamd
Key = 0102030405060708091011121314
Device = server2,11444
Account = xx,yy
CAID = 0624
group = 1
fallback = 0
IDENT = 0624:000000
ReconnectTimeout = 20

[reader]
Label = Port_11555
Protocol = newcamd
Key = 0102030405060708091011121314
Device = server1,11555
Account = xx,yy
CAID = 0d96
group = 1
fallback = 0
IDENT = 0d96:0,04,08,0c,10,24,28
ReconnectTimeout = 20

[reader]
Label = Port_11444
Protocol = newcamd
Key = 0102030405060708091011121314
Device = server2,11444
Account = xx,yy
CAID = 0624
group = 1
fallback = 0
IDENT = 0624:000000
ReconnectTimeout = 20

+++ oscam.dvbapi+++

P: 0d96
P: 0624
I: 0500

+++ oscam.user+++

[account]
user = jozo
pwd = heslo
group = 1
au = 1
keepalive = 1

[jajo4546]

toto si zmen

Kód: Vybrat vše

Account = xx,yy

na

Kód: Vybrat vše

user = xx
password = yy

[joy]

ake jednoduche bingo, takze moja verzia oscam nepodporuje premennu "Account"

este jedna otazka, na MTV mi stale hadze chybu, s tym sa asi uz neda nic urobit ?

2018/02/18 00:07:24 5CB1361D c (ecm) jozo (0D96@000004/0000/0310/80:EEB48E6AB9E48114776E0689FF294653): found (181 ms) by Port_11555 (P/2/2/2)
2018/02/18 00:07:26 5CB1361D c (ecm) jozo (0D96@000004/0000/030C/80:C058582CAE29EBCBAEF24E7DFD9FFEF7): timeout (3000 ms) by Port_11555,Port_11555 (F/2/2/2)
2018/02/18 00:07:30 5CB1361D c (ecm) jozo (0D96@000004/0000/0310/80:34D40F9CD592D92CD287AEC7BF75E91E): found (383 ms) by Port_11555 (P/2/2/2)

[dudo123]

na to že sa pripájaš len cez newcamd to máš riadne zasraté

[neoxo]

prosim vas, ako obmedzim zapisy na kartu, ked mam 0D96 v citacke aj citam z 0D96 newcamd_server ?
Pouzity je oscam-atv_1.2_11353

Kód: Vybrat vše

logy:
2018/02/27 20:20:51 754162BD c      (ecm) dvbapiau (0D96@000004/0000/030A/80:AB46CF6556E0E7A1E1094701BEC20049): found (184 ms) by newcamd_server (P/2/2/2) - Cinemax
2018/02/27 20:20:51 255E8407 r   (newcamd_server) citacka_horna [cryptoworks] dvbapiau emmtype=global, len=72 (hex: 0x48), cnt=1: written (1946 ms)
2018/02/27 20:20:53 255E8407 r   (newcamd_server) citacka_horna [cryptoworks] dvbapiau emmtype=global, len=72 (hex: 0x48), cnt=1: written (1865 ms)
2018/02/27 20:20:56 255E8407 r   (newcamd_server) citacka_horna [cryptoworks] dvbapiau emmtype=global, len=55 (hex: 0x37), cnt=1: written (2125 ms)
2018/02/27 20:20:57 255E8407 r   (newcamd_server) citacka_horna [cryptoworks] dvbapiau emmtype=global, len=48 (hex: 0x30), cnt=1: written (1716 ms)


oscam.conf
[dvbapi]
enabled                       = 1
au                            = 1
user                          = dvbapiau
boxtype                       = dreambox


oscam.user
[account]
user                          = dvbapiau
au                            = 1
group                         = 1,8



oscam.server
[reader]
label                         = citacka_horna
protocol                      = internal
device                        = /dev/sci0
caid                          = 0D96
detect                        = cd
mhz                           = 500
group                         = 1
emmcache                      = 1,1,2,0

[reader]
label                         = newcamd_server
protocol                      = newcamd
device                        = ******
key                           = 0102030405060708091011121314
user                          = ******
password                      = ******
ident                         = 0D96:000000,000004,000008,00000C,000010,000024,000028
group                         = 8
audisabled                    = 1



oscam.dvbapi
P: 0D96 1

[piki75]

Prihlásiš sa cez Web do nastavenia Oscam, Readers, vyberieš čítačku ktorú chceš nastaviť, nájdi položku "AU disabled" dáš fajku a Reštart Oscam.

[neoxo]

Myslis aby som zapol "AU disabled" na "citacka_horna" ? To by mi ale nepresli zapisy na kartu vobec. Ja potrebujem aby na nu prechadzali ale aby do nej nezapisoval "newcamd_server" - vid log.

[martinxp]

ze vas porad dokola bavi resit jak nastavit oscam na 0624 - 0D96, au a jine. to jsou 500-1000x vyresene a zde na foru popsane veci. radeji bych videl resit debug logy , popsane rozdily v ecm , logy z komunikace karty - prijmac - atd , nasledne vylepseni aplikovat do zdrojaku atd ..

[alben]

ze vas porad dokola bavi resit jak nastavit oscam na 0624 - 0D96, au a jine. to jsou 500-1000x vyresene a zde na foru popsane veci. radeji bych videl resit debug logy , popsane rozdily v ecm , logy z komunikace karty - prijmac - atd , nasledne vylepseni aplikovat do zdrojaku atd ..

A co ti v tom brani spravit logy pastnut ich sem a urobit rozbor? Jaj cakas, kym to druhy spravi.

[piki75]

Myslis aby som zapol "AU disabled" na "citacka_horna" ? To by mi ale nepresli zapisy na kartu vobec. Ja potrebujem aby na nu prechadzali ale aby do nej nezapisoval "newcamd_server" - vid log.

Postup je ten istý, zakážeš "newcamd_server" pod Readers a nebude zapisovať na kartu.

[neoxo]

Postup je ten istý, zakážeš "newcamd_server" pod Readers a nebude zapisovať na kartu.

Ale to uz davno bolo:

[reader]
label = newcamd_server
..
..
audisabled = 1

[bobor18]

Zdravím. Potrebujem pomôcť s nastavením oscamu pod IPv6. Oscam mam skompilovaný s jeho podporou. Podľa stránky streamboard som do httpallowed pridal ::1 ...a tam som vlastne aj skončil.
Pre vysvetlenie - pripájam sa na oscam z vonku cez dyndns donedávna to bolo cez IPv4, no situácia sa zmenila a musel som prejsť na IPv6. Po zadaní dyndns adresy sa dostanem na stb avšak ak zadám port oscamu vyskočí mi chybové hlásenie: 403 Forbidden, Access denied. Ďakujem za každú radu.

[gusto1]

No tak potom to ::1 odtial vyhod a nechaj to prazdne (pouzi len http user a http pwd).
Do ipv6 zatial velmi nevidim, ale s prechodovymi mechanizmami bude mat obycajny uzivatel skor problem.
Problem je v tom, ze IPv6 a IPv4 su 2 uplne odlisne protokoly. V IPv6 sieti nikdy neuvidis IPv4 internet a to plati aj opacne, preto boli vyvinute prechodove mechanizmy aby si v IPv6 sieti mal dosah aj na IPv4 siet.
Kazdy ISP ponuka nieco ine, ale najcastejsie je to DS-Lite.

[bobor18]

Ak odtiaľ všetko vyhodím tak sa na webif už nedostanem...nebude povolený žiaden rozsah ip, z ktorých sa dá pripojiť na webif. Problém nie je, že tam mám meno a heslo, ale v tom, že nie je povolená ip adresa.

[gusto1]

tak potom skus

Kód: Vybrat vše

opkg list | grep tcpdump
opkg install tcpdump

a spust si tcpdump

Kód: Vybrat vše

tcpdump -i eth0 port 8888

pokial mas oscam na porte 8888 a sleduj log.

[mike488]

Zdravím,
druhým dnem se snažím rozchodit ICE kartu v režimu irdeto a nějak se mi to nedaří.. Byla by tady nějaká dobrá duše, která by mrkla na config, kde mám chybu? Díky mockrát

conf
[global]
pidfile = /tmp/oscam.pid
usrfile = /tmp/oscamuser.log
logfile = /tmp/oscam.log
cwlogdir = /tmp/cw
disablelog = 0
disableuserfile = 0
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
failbantime = 0
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 200
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
lb_mode = 0
lb_save = 0
lb_nbest_readers = 1
lb_nfb_readers = 1
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_reopen_seconds = 900
resolvegethostbyname = 0
double_check = 0

[newcamd]
port = 10000@0624:000000
key = 0102030405060708091011121314

[dvbapi]
enabled = 1
au = 1
user = pokus
boxtype = dreambox

[webif]
httpport = 8888
httpuser = root
httppwd = 123456
httprefresh = 8
httpallowed = 0.0.0.0-255.255.255.255
hideclient_to = 15

Server
[reader]
label = irdeto
protocol = internal
device = /dev/sci0
caid = 0624
boxkey = A1C6F3D8B5E1F2C1
rsakey = 79EA25A763DA2C3E02B456A13962E60BCE63E628A2C177BE951CED96A9C6131A146F98D5867B7AE6682324FD6481913C0241F065C8D3457E54BB59B7B5DE0362
force_irdeto = 1
detect = cd
mhz = 500
cardmhz = 600
group = 1
emmcache = 1,1,2,0

dvbapi
P: 0624 1

User
[account]
user = pokus
pwd = 123456
group = 1


LOG
(0624@000000/0000/1F41/64:8A96FD228838738DE4A93DD5D6A22B2C): not found (3 ms) by irdeto - CT 1 Cechy HD
2018/05/07 11:53:27 633EF550 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
2018/05/07 11:53:27 633EF550 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0624 PROVID 000000 ECMPID 0474 ANY CHID PMTPID 044C VPID 0456
2018/05/07 11:53:28 633EF550 c (ecm) pokus (0624@000000/0000/1F41/64:8A96FD228838738DE4A93DD5D6A22B2C): not found (2 ms) by irdeto - CT 1 Cechy HD
2018/05/07 11:53:28 633EF550 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
2018/05/07 11:53:28 633EF550 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0624 PROVID 000000 ECMPID 0474 ANY CHID PMTPID 044C VPID 0456
2018/05/07 11:53:28 633EF550 c (ecm) pokus (0624@000000/0000/1F41/64:8A96FD228838738DE4A93DD5D6A22B2C): not found (1 ms) by irdeto - CT 1 Cechy HD
2018/05/07 11:53:28 633EF550 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
2018/05/07 11:53:28 633EF550 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0624 PROVID 000000 ECMPID 0474 ANY CHID PMTPID 044C VPID 0456
2018/05/07 11:53:29 633EF550 c (ecm) pokus (0624@000000/0000/1F41/64:8A96FD228838738DE4A93DD5D6A22B2C): not found (5 ms) by irdeto - CT 1 Cechy HD
2018/05/07 11:53:29 633EF550 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
2018/05/07 11:53:29 633EF550 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0624 PROVID 000000 ECMPID 0474 ANY CHID PMTPID 044C VPID 0456
2018/05/07 11:53:29 633EF550 c (ecm) pokus (0624@000000/0000/1F41/64:8A96FD228838738DE4A93DD5D6A22B2C): not found (4 ms) by irdeto - CT 1 Cechy HD
2018/05/07 11:53:29 633EF550 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!

[Mila_s]

Nemám teď moc času to podrobně zkoumat, prostým porovnáním s mými configy navrhuji, abys zkusil změnit toto:
conf
unlockparental = 1

server
# caid = 0624 (zakomentuj tento řádek)
mhz = 600
cardmhz = 600

dvbapi
P: 0624 (smaž tu jedničku)

[peter54]

Klasika - ziadne zapisy, ziadne dekodovanie. To je irdeto. Najprv zapisy, potom vsetko ostatne. Keby to tu nebolo 153,7 krat riesene. Tak tu mame 1800 prispevkov a nikto si nevie precitat tyzden stare odpovede, tak sem plesk - neide, pomoooooc.