OSCAM - NAS

[peter54]

Skylink ICE karty funguju v pcsc na 0624 uplne korektne - netreba nutit. RTVS v pcsc bez naroku.
Karta , ktora je ochotna ist v phoenix/mouse bez udania cardmhz (357) pojde rovnako dobre aj v pcsc.

[gchevalier]

EnoSat
tomu sa asi hovori kartovy kombajn - ak je to stabilne tak , asi mas vyriesene ze konkretne ttyusbX je vzdy rovnaka karta

gold.emilya
postupoval by som takto
- zhodil oscam, vsetky citacky dal enable=0
- nainstaloval pcsclite, pre istotu skontroloval libusb
- spustil oscam v ssh konzole napr: /usr/bin/oscam -d -c /cesta_ku_konfig_adresaru
- pozoroval co vypisuje konzola, potom postupne enabloval citacku/y s protokolom pcsc podla navodov vyssie
- ked oscam na niecom zdochne tak by si to mal vidiet v konzole

[EnoSat]

je to len test na stare karty, kedze vecsina providerov aktivovala pocas corony aj stare neaktivne karty , normalna karta je v boxe

[gold.emilya]

Prosim vas po vytiahnuti logu vidim toto akonahel zapnem reader oscam padne a v logu mam iba toto.

Kód: Vybrat vše

>> OSCam <<  cardserver log switched at Tue Apr 28 12:51:45 2020
-------------------------------------------------------------------------------
2020/04/28 12:51:45 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11572 (aarch64-unknown-linux-gnueabi-ssl-libusb-pcsc)
2020/04/28 12:51:45 00000000 s     (main) System name    = Linux
2020/04/28 12:51:45 00000000 s     (main) Host name      = synology
2020/04/28 12:51:45 00000000 s     (main) Release        = 4.4.59+
2020/04/28 12:51:45 00000000 s     (main) Version        = #24922 SMP Thu Mar 12 13:01:18 CST 2020
2020/04/28 12:51:45 00000000 s     (main) Machine        = aarch64
2020/04/28 12:51:45 00000000 s     (main) creating pidfile /volume1/@appstore/oscam/var/run/oscam.pid with pid 19966
2020/04/28 12:51:45 00000000 s   (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2020/04/28 12:51:45 00000000 s     (main) signal handling initialized
2020/04/28 12:51:45 00000000 s      (net) newcamd: initialized (fd=5, port=9001)
2020/04/28 12:51:45 00000000 s      (net) -> CAID: 0B01 PROVID: 000000
2020/04/28 12:51:45 00000000 s      (net) cccam: initialized (fd=6, port=16001)
2020/04/28 12:51:45 00000000 s   (reader) pcsc1 [pcsc] creating thread for device 0
2020/04/28 12:51:45 00000000 s (emmcache) loaded 0 emmcache records from /volume1/@appstore/oscam/var/log/oscam.emmcache in 0 ms
2020/04/28 12:51:45 00000000 s (emmcache) loaded 0 emmstat records from /volume1/@appstore/oscam/var/log/oscam.emmstat in 0 ms
2020/04/28 12:51:45 00000000 s (anticasc) anti cascading disabled
2020/04/28 12:51:45 2A4584A4 h    (webif) webif: decompressed 181940 bytes back into 450568 bytes
2020/04/28 12:51:45 2A4584A4 h    (webif) WARNING: Your http disk template /var/packages/oscam/target/etc/template/CSS.tpl is in the old template format without revision info. Please consider upgrading it!
2020/04/28 12:51:45 2A4584A4 h    (webif) If you are sure that it is current, add the following line at the beginning of the template to suppress this warning: <!--OSCam;2221490740;1.20_svn;11572;-->
2020/04/28 12:51:45 2A4584A4 h    (webif) WARNING: Your http disk template /var/packages/oscam/target/etc/template/FOOTER.tpl is in the old template format without revision info. Please consider upgrading it!
2020/04/28 12:51:45 2A4584A4 h    (webif) If you are sure that it is current, add the following line at the beginning of the template to suppress this warning: <!--OSCam;16619484;1.20_svn;11572;-->
2020/04/28 12:51:45 2A4584A4 h    (webif) WARNING: Your http disk template /var/packages/oscam/target/etc/template/HEADERSHORT.tpl is in the old template format without revision info. Please consider upgrading it!
2020/04/28 12:51:45 2A4584A4 h    (webif) If you are sure that it is current, add the following line at the beginning of the template to suppress this warning: <!--OSCam;267516716;1.20_svn;11572;-->
2020/04/28 12:51:45 2A4584A4 h    (webif) WARNING: Your http disk template /var/packages/oscam/target/etc/template/JQUERY.tpl is in the old template format without revision info. Please consider upgrading it!
2020/04/28 12:51:45 2A4584A4 h    (webif) If you are sure that it is current, add the following line at the beginning of the template to suppress this warning: <!--OSCam;1860189373;1.20_svn;11572;-->
2020/04/28 12:51:45 527B4D92 r   (reader) pcsc1 [pcsc] Reader initialized (device=0, detect=cd, mhz=357, cardmhz=357)
2020/04/28 12:51:45 2A4584A4 h    (webif) WARNING: Your http disk template /var/packages/oscam/target/etc/template/JSCRIPT.tpl is in the old template format without revision info. Please consider upgrading it!
2020/04/28 12:51:45 2A4584A4 h    (webif) If you are sure that it is current, add the following line at the beginning of the template to suppress this warning: <!--OSCam;3536674531;1.20_svn;11572;-->
2020/04/28 12:51:45 2A4584A4 h    (webif) WARNING: Your http disk template /var/packages/oscam/target/etc/template/CLIENTHEADLINEBIT.tpl is in the old template format without revision info. Please consider upgrading it!
2020/04/28 12:51:45 2A4584A4 h    (webif) If you are sure that it is current, add the following line at the beginning of the template to suppress this warning: <!--OSCam;3093935193;1.20_svn;11572;-->
2020/04/28 12:51:45 2A4584A4 h    (webif) HTTP Server running. ip=:: port=9000
2020/04/28 12:51:46 527B4D92 r   (reader) pcsc1 [pcsc] PCSC was opened with handle: 925298665
2020/04/28 12:51:46 527B4D92 r   (reader) pcsc1 [pcsc] card detected
2020/04/28 12:51:46 527B4D92 r   (reader) pcsc1 [pcsc] ATR: 3B 78 12 00 00 54 C4 03 00 8F  
2020/04/28 12:51:46 527B4D92 r   (reader) pcsc1 [pcsc] ATR: 3B 78 12 00 00 54 C4 03 00 8F 

[peter54]

Vypni oscam a otestuj citacku s pcsc-scan. Ved na tom nic zlozite nieje.
Ja by som to videl na problemy s binarkou. Ak si nevies skomplikovať sam skús tuto.


root@zeroplus:/usr/bin# file oscam oscam: ELF 64-bit LSB shared object, ARM aarch64, version 1 (SYSV), statically linked, stripped

[gold.emilya]

Dakujem velmi moc idem otestovat zatial to nepadlo

[Zipík]

Ahojte,

zapomnel jsem heslo do oscamu pres web, kde najdu soubor oscam.conf v nassu?Díky za info

Už jsem to našel /volume1/@appstore/oscam/etc

[bach1]

Dobrý den, změnil jsem Sanology DS115 za Synology DS218 a nemůžu rozběhnout čtečku karet, která mi na DS115 jede jako mouse na naprosto normálně. Nainstaloval jse na D218 úplně stejně od https://synology.nimloth.pl modul OSCAM a vzal si konfiguráky z funkční DS115 a kartu to nepřečte, nevím kam už šáhnout. Vždy na nižších modelech to jelo na první dobrou, zde ale nevidím vůbec kartu. na obou zařízeních se čteška identifikuje jako /dev/ttyUSB0 - to jsem kontroloval.

Kód: Vybrat vše

root@server-tkr:~# setserial -g /dev/tty[USB]*
/dev/ttyS0, UART: 16550A, Port: 0x0000, IRQ: 194
/dev/ttyS1, UART: 16550A, Port: 0x0000, IRQ: 163
/dev/ttyS2, UART: unknown, Port: 0x0000, IRQ: 0
/dev/ttyS3, UART: unknown, Port: 0x0000, IRQ: 0
/dev/ttyUSB0, UART: 16654, Port: 0x0000, IRQ: 0
/dev/ttyUSB1: No such device or address
/dev/ttyUSB2: No such device or address
/dev/ttyUSB3: No such device or address
/dev/ttyUSB4: No such device or address
/dev/ttyUSB5: No such device or address
root@server-tkr:~# ls -l /dev/ttyUSB0
crw-r--r-- 1 root root 188, 0 Nov 17 21:48 /dev/ttyUSB0
root@server-tkr:~# lsusb -t
/:  Bus 07.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
/:  Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
    |__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbfs, 1.5M
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/0p, 5000M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
    |__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=pl2303, 12M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
root@server-tkr:~# lsusb
Bus 004 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
Bus 006 Device 002: ID 051d:0002 American Power Conversion Uninterruptible Power Supply
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
root@server-tkr:~#

Kód: Vybrat vše

2020/11/17 21:48:04 00000000 s     (main) System name    = Linux
2020/11/17 21:48:04 00000000 s     (main) Host name      = server-tkr
2020/11/17 21:48:04 00000000 s     (main) Release        = 4.4.59+
2020/11/17 21:48:04 00000000 s     (main) Version        = #25426 SMP Tue Jul 14 19:47:36 CST 2020
2020/11/17 21:48:04 00000000 s     (main) Machine        = aarch64
2020/11/17 21:48:04 00000000 s     (main) creating pidfile /volume1/@appstore/oscam/var/run/oscam.pid with pid 30008
2020/11/17 21:48:04 00000000 s   (config) userdb reloaded: 4 accounts loaded, 0 expired, 0 disabled
2020/11/17 21:48:04 00000000 s     (main) signal handling initialized
2020/11/17 21:48:04 00000000 s      (net) newcamd: initialized (fd=5, port=35500)
2020/11/17 21:48:04 00000000 s      (net) -> CAID: 0624 PROVID: 300BFF
2020/11/17 21:48:04 00000000 s      (net) cccam: initialized (fd=6, port=34000)
2020/11/17 21:48:04 00000000 s   (reader) Skylink_IRDETO [mouse] creating thread for device /dev/ttyUSB0
2020/11/17 21:48:04 00000000 s     (main) waiting for local card init
2020/11/17 21:48:04 1FBB7464 h    (webif) webif: decompressed 185605 bytes back into 490824 bytes
2020/11/17 21:48:04 1FBB7464 h    (webif) HTTP Server running. ip=:: port=83
2020/11/17 21:48:04 3B099E1D r   (reader) Skylink_IRDETO [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
2020/11/17 21:48:05 3B099E1D r   (reader) Skylink_IRDETO [mouse] card detected
2020/11/17 21:48:09 3B099E1D r   (reader) Skylink_IRDETO [mouse] Error activating card.
2020/11/17 21:48:17 3B099E1D r        (-) -- Skipped 2 duplicated log lines --
2020/11/17 21:48:17 3B099E1D r   (reader) Skylink_IRDETO [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1
2020/11/17 21:48:17 3B099E1D r   (reader) Skylink_IRDETO [mouse] card initializing error
2020/11/17 21:48:18 00000000 s     (main) init for all local cards done
2020/11/17 21:48:18 00000000 s (emmcache) loaded 0 emmcache records from /volume1/@appstore/oscam/var/log/oscam.emmcache in 0 ms
2020/11/17 21:48:18 00000000 s (emmcache) loaded 0 emmstat records from /volume1/@appstore/oscam/var/log/oscam.emmstat in 0 ms

[peter54]

Čo máš za čítačku a reader? Neverím, ze to máš rovnako ako v starom stroji.
Na 99% máš skl kartu. Tam patrí cardmhz = 357 pripadne riadok vynechať.
Zatiaľ čo pre stb môžeš do cardmhz písať ľubovoľné nezmysly, lebo si aj tak spraví po svojom, ftdi je háklivé a musí to tam byť správne.

[bach1]

No nedělám to poprvé - postupem času jsem vyzkoušel na DS112j, DS115j, DS115, čtečka je do USB typ phoenix.
Nyní mám Syno DS218 s jiným procákem oproti předchozím modelům. Prostě vezmu USB čtečku s kartou a vrazím to do DS115
namontuje se na /dev/ttyUSB0 a OK vše jede, vytáhnu z DS115 a vrazím to do DS218 namontuje se na /dev/ttyUSB0 a viz výpis - nejede. Jinak FTDI nemám , mám to na jiném čipu PL2303 , ale to není podstatné.

config:

Kód: Vybrat vše

# oscam.server generated automatically by Streamboard OSCAM 1.20_svn SVN r11677
# Read more: https://svn.streamboard.tv/oscam/trunk/Distribution/doc/txt/oscam.server.txt

[reader]
label                         = Skylink_IRDETO
description                   = Skylink IRDETO
protocol                      = mouse
device                        = /dev/ttyUSB0
deprecated                    = 1
cacheex_allow_filter          = 0
caid                          = 0624
boxkey                        = xxxxxxxx
rsakey                        =  xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
force_irdeto                  = 1
detect                        = CD
mhz                           = 600
cardmhz                       = 600
group                         = 1
emmcache                      = 1,1,2,1

[kratke_pole]

na jiném čipu PL2303 , ale to není podstatné.

PL2303 ma obcas problem s inou frek ako 3,57, otazka driverov.
FTDI je bez problemov.

[bach1]

Máte typ na čtečku s FTDI?

[kratke_pole]

Tu na fore inzercia "bzuk" vyskusane..

[bach1]

Stejně mi to ale pořád nějak nesedí, proč to zrovna v té D218 nejede a na původních NAS ano a to i na takové historii jako
WL500gP router.
Problém bude asi s rychlostí časování, pokud začnu na čtečce prohazovat switche občas se karta chytí:

Kód: Vybrat vše

2020/11/18 19:15:26 00000000 s     (main) System name    = Linux
2020/11/18 19:15:26 00000000 s     (main) Host name      = server-tkr
2020/11/18 19:15:26 00000000 s     (main) Release        = 4.4.59+
2020/11/18 19:15:26 00000000 s     (main) Version        = #25426 SMP Tue Jul 14 19:47:36 CST 2020
2020/11/18 19:15:26 00000000 s     (main) Machine        = aarch64
2020/11/18 19:15:26 00000000 s     (main) creating pidfile /volume1/@appstore/oscam/var/run/oscam.pid with pid 25259
2020/11/18 19:15:26 00000000 s   (config) userdb reloaded: 4 accounts loaded, 0 expired, 0 disabled
2020/11/18 19:15:26 00000000 s     (main) signal handling initialized
2020/11/18 19:15:26 00000000 s      (net) newcamd: initialized (fd=5, port=35500)
2020/11/18 19:15:26 00000000 s      (net) -> CAID: 0624 PROVID: 300BFF
2020/11/18 19:15:26 00000000 s      (net) cccam: initialized (fd=6, port=34000)
2020/11/18 19:15:26 00000000 s   (reader) Skylink_IRDETO [mouse] creating thread for device /dev/ttyUSB0
2020/11/18 19:15:26 00000000 s     (main) waiting for local card init
2020/11/18 19:15:26 53AD1127 h    (webif) webif: decompressed 185605 bytes back into 490824 bytes
2020/11/18 19:15:26 53AD1127 h    (webif) HTTP Server running. ip=:: port=83
2020/11/18 19:15:27 7343425F r   (reader) Skylink_IRDETO [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
2020/11/18 19:15:27 7343425F r   (reader) Skylink_IRDETO [mouse] card detected
2020/11/18 19:15:31 7343425F r   (reader) Skylink_IRDETO [mouse] Error activating card.
2020/11/18 19:15:40 7343425F r        (-) -- Skipped 2 duplicated log lines --
2020/11/18 19:15:40 7343425F r   (reader) Skylink_IRDETO [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1
2020/11/18 19:15:40 7343425F r   (reader) Skylink_IRDETO [mouse] card initializing error
2020/11/18 19:15:40 00000000 s     (main) init for all local cards done
2020/11/18 19:15:40 00000000 s (emmcache) loaded 0 emmcache records from /volume1/@appstore/oscam/var/log/oscam.emmcache in 0 ms
2020/11/18 19:15:40 00000000 s (emmcache) loaded 0 emmstat records from /volume1/@appstore/oscam/var/log/oscam.emmstat in 0 ms
2020/11/18 19:15:46 7343425F r   (reader) Skylink_IRDETO [mouse] card detected
2020/11/18 19:15:51 7343425F r   (reader) Skylink_IRDETO [mouse] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00 
2020/11/18 19:15:52 7343425F r   (reader) Skylink_IRDETO [mouse] Hist. Bytes: TÄ
2020/11/18 19:15:52 7343425F r   (reader) Skylink_IRDETO [mouse] detect irdeto card
2020/11/18 19:15:52 7343425F r   (reader) Skylink_IRDETO [mouse] Warning: needed try nr 2, next ECM has some delay
2020/11/18 19:16:12 7343425F r        (-) -- Skipped 1 duplicated log lines --
2020/11/18 19:16:12 7343425F r   (reader) Skylink_IRDETO [mouse] card detected
2020/11/18 19:16:12 7343425F r   (reader) Skylink_IRDETO [mouse] type: CryptoWorks
2020/11/18 19:16:29 7343425F r   (reader) Skylink_IRDETO [mouse] Warning: needed try nr 2, next ECM has some delay
2020/11/18 19:16:45 7343425F r   (reader) Skylink_IRDETO [mouse] card system not supported
2020/11/18 19:16:45 7343425F r   (reader) Skylink_IRDETO [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1
2020/11/18 19:16:45 7343425F r   (reader) Skylink_IRDETO [mouse] card initializing error

[pikejcz]

- důležité je správné nastavení switche čtečky USB phoenix/pl2303
buď 3.57MHz nebo 6.00MHz

- divná/nesmyslná kombinace v oscam.server pro OSCAM 1.20_svn r11677:
deprecated = 1
mhz = 600
cardmhz = 600

aby oscam r11677 na toto správně reagoval mělo by (podle mně) zde být:
autospeed = 0

Já bych postupoval např. takto:

vyhodit řádky:
deprecated = 1
mhz = 600
cardmhz = 600

pokus 1.) switch čtečky USB phoenix/pl2303 = 6.00MHz
- v oscam.server:

a)nic nepřidat

b) přidat
autospeed = 0
deprecated = 1

c) přidat
autospeed = 0
cardmhz = 600

pokus 2.) switch čtečky USB phoenix/pl2303 = 3.57MHz
- v oscam.server:

a) přidat
autospeed = 0
deprecated = 1

b) přidat
autospeed = 0
cardmhz = 357

a v logu oscamu budeš sledovat co ti při inicializaci karty píše.

Pozn.
- u pokusu 1.) a) b) i c) předpokládám neúspěch ?
...ERROR: Could not read reader->convention
Error activating card.
card initializing error

- u pokusu 2.) a) (možná i b) předpokládám úspěch ?

Petr

[bach1]

Podle mě toto není problém, dle mého SW pro DS218 posílá buď brzy , nebo pozdě reset do karty. Pokud s tím resetem (switch přepínající smartmouse/phoenix) různě odpojuji a připojuji , tak se karta inicializuje a jede s jakýmkoliv nastavením, ale není řešení ručně řešit reset karty, to bych nesměl oscam vůbec restartovat, pokaždé bych k tomu musel přijít a kartu resetovat pokusně ručně. Nepomůže ani zpomalit rychlost portu stty -F /dev/ttyUSB0 9600.

1a

Kód: Vybrat vše

2020/11/19 08:01:59 00000000 s   (reader) Skylink_IRDETO [mouse] creating thread for device /dev/ttyUSB0
2020/11/19 08:01:59 00000000 s     (main) waiting for local card init
2020/11/19 08:01:59 53AD1127 h    (webif) webif: decompressed 185605 bytes back into 490824 bytes
2020/11/19 08:01:59 53AD1127 h    (webif) HTTP Server running. ip=:: port=83
2020/11/19 08:01:59 7343425F r   (reader) Skylink_IRDETO [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2020/11/19 08:02:00 7343425F r   (reader) Skylink_IRDETO [mouse] card detected
2020/11/19 08:02:04 7343425F r   (reader) Skylink_IRDETO [mouse] Error activating card.
2020/11/19 08:02:12 7343425F r        (-) -- Skipped 2 duplicated log lines --
2020/11/19 08:02:12 7343425F r   (reader) Skylink_IRDETO [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1
2020/11/19 08:02:12 7343425F r   (reader) Skylink_IRDETO [mouse] card initializing error
2020/11/19 08:02:13 00000000 s     (main) init for all local cards done

1b

Kód: Vybrat vše

2020/11/19 08:05:09 00000000 s   (reader) Skylink_IRDETO [mouse] creating thread for device /dev/ttyUSB0
2020/11/19 08:05:09 00000000 s     (main) waiting for local card init
2020/11/19 08:05:09 53AD1127 h    (webif) webif: decompressed 185605 bytes back into 490824 bytes
2020/11/19 08:05:09 53AD1127 h    (webif) HTTP Server running. ip=:: port=83
2020/11/19 08:05:09 7343425F r   (reader) Skylink_IRDETO [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2020/11/19 08:05:10 7343425F r   (reader) Skylink_IRDETO [mouse] card detected
2020/11/19 08:05:13 7343425F r   (reader) Skylink_IRDETO [mouse] Error activating card.
2020/11/19 08:05:22 7343425F r        (-) -- Skipped 2 duplicated log lines --
2020/11/19 08:05:22 7343425F r   (reader) Skylink_IRDETO [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1
2020/11/19 08:05:22 7343425F r   (reader) Skylink_IRDETO [mouse] card initializing error
2020/11/19 08:05:22 00000000 s     (main) init for all local cards done

1c

Kód: Vybrat vše

2020/11/19 08:06:53 00000000 s   (reader) Skylink_IRDETO [mouse] creating thread for device /dev/ttyUSB0
2020/11/19 08:06:53 00000000 s     (main) waiting for local card init
2020/11/19 08:06:53 53AD1127 h    (webif) webif: decompressed 185605 bytes back into 490824 bytes
2020/11/19 08:06:53 53AD1127 h    (webif) HTTP Server running. ip=:: port=83
2020/11/19 08:06:53 7343425F r   (reader) Skylink_IRDETO [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=600)
2020/11/19 08:06:54 7343425F r   (reader) Skylink_IRDETO [mouse] card detected
2020/11/19 08:06:58 7343425F r   (reader) Skylink_IRDETO [mouse] Error activating card.
2020/11/19 08:07:06 7343425F r        (-) -- Skipped 2 duplicated log lines --
2020/11/19 08:07:06 7343425F r   (reader) Skylink_IRDETO [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1
2020/11/19 08:07:06 7343425F r   (reader) Skylink_IRDETO [mouse] card initializing error
2020/11/19 08:07:07 00000000 s     (main) init for all local cards done

2a

Kód: Vybrat vše

2020/11/19 08:08:38 00000000 s   (reader) Skylink_IRDETO [mouse] creating thread for device /dev/ttyUSB0
2020/11/19 08:08:38 00000000 s     (main) waiting for local card init
2020/11/19 08:08:38 53AD1127 h    (webif) webif: decompressed 185605 bytes back into 490824 bytes
2020/11/19 08:08:38 53AD1127 h    (webif) HTTP Server running. ip=:: port=83
2020/11/19 08:08:38 7343425F r   (reader) Skylink_IRDETO [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2020/11/19 08:08:39 7343425F r   (reader) Skylink_IRDETO [mouse] card detected
2020/11/19 08:08:42 7343425F r   (reader) Skylink_IRDETO [mouse] Error activating card.
2020/11/19 08:08:51 7343425F r        (-) -- Skipped 2 duplicated log lines --
2020/11/19 08:08:51 7343425F r   (reader) Skylink_IRDETO [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1
2020/11/19 08:08:51 7343425F r   (reader) Skylink_IRDETO [mouse] card initializing error
2020/11/19 08:08:52 00000000 s     (main) init for all local cards done

[pikejcz]

Mám otázky:

- předpokládám, že: switch čtečky USB phoenix/pl2303 = 6.00MHz a je použit tvůj původní oscam.server
jak vypadá na DS115 v logu start oscamu - detekce karty - je tam mj. také zápis:
.....(reader) Skylink_IRDETO [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600) ?

- na DS115 je stejná verze oscamu jako na D218 (r11677) ?

(- usbserial.ko a pl2303.ko jsou u DS115 a D218 jiné verze ?)

- při pokusech jsi switch čtečky USB phoenix/pl2303 nastavoval (na 3.57MHz nebo 6.00MHz) při jejím odpojení od NASu ?
(já bych to udělal takto: vypnout/shutdown NAS, odpojit čtečku, nastavit 3.57MHz nebo 6.00MHz, připojit čtečku, zapnout NAS, spustit oscam)

- má D218 další USB porty ? - pokud ano, zkoušel jsi čtečku USB phoenix v jiném USB portu ?

Petr

[VTronik]

bach1
A proč si to nevyzkoušel takto, jak ti již psal peter? Se čtečkou nastavenou na 6MHz...

Kód: Vybrat vše

[reader]
label = Skylink_IRDETO
description = Skylink IRDETO
protocol = mouse
device = /dev/ttyUSB0
deprecated = 1
cacheex_allow_filter = 0
caid = 0624
autospeed = 0
boxkey = xxxxxxxx
rsakey = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
force_irdeto = 1
detect = CD
mhz = 600
cardmhz = 357
group = 1
emmcache = 1,1,2,0

[bach1]

Protože to s tím nemá co dělat a nepomůže bohužel vůbec nic.
Už jsem to debugoval se streamboard.tv a není to problém jakéhokoliv nastavení, ani čtečky jako takové, ale je problém s ovladači v jádře zmíněného DS218 , kdyby se jednalo o DS218+ , kde je jiný procesor, tak tento problém není. Ještě řeším se synology - moc to nevidím na rychlou opravu spíš až ve verzi 6.3, ale paralelně s tím vším si stavím ještě čtečku s FTDI čipem, tak uvidím. Zatím to provozuji na jednom boxu VU+ zero, tak mě to časově netíží, TV běhají tak doma klid, ale vnitřně mě to s.re.

[gold.emilya]

Prosim o radu mam tuto verziu na synology nahranu.
Version: oscam-1.20_svn-r11678
Synology DS3615XS
https://synology.nimloth.pl/?arch=bromolow#
ale ked spsutim citacku oscam padne prosim ako dokazem emulovat oscam subor?