Oscam a jeho nastavenie (s popisom - testovane v E2)

dlhe_pole · Příspěvek od **dlhe_pole** » 23.červenec 2015 - 11:32

to nie je o tom kto je macher a kto nie, ale o vyjadrovani sa:

1, ked mam nejaky problem tak ho popisem
2, ak to neviem dobre popisat prilozim debug log z oscamu
3, zaradim svoju otazku do spravnej sekcie

gusto1 · Příspěvek od **gusto1** » 23.červenec 2015 - 15:34

djmk píše:po vcerajsom vypadku elektriky mi nenabehla sky link karta v citacke ju vidi ale karta je ako keby nefunkcna.kartu som skusal aj v inom boxe /ale iba v oscame/ pred vypadkom bola karta funkcna

najskor asi pomoze log od restartu

djmk · Příspěvek od **djmk** » 23.červenec 2015 - 15:46

ale co sa mohlo stat?

Příspěvek od **marecek29** » 23.červenec 2015 - 16:18

Na takto polozenou otazku pomuze jen toto

gusto1 · Příspěvek od **gusto1** » 23.červenec 2015 - 18:25

Alebo si zapni TV8 (tam to neni kodovane) http://www.tv8.sk/wp/?p=773 velmi dobry je vraj rudy

djmk · Příspěvek od **djmk** » 23.červenec 2015 - 19:11

gusto1 píše:Alebo si zapni TV8 (tam to neni kodovane) http://www.tv8.sk/wp/?p=773 velmi dobry je vraj rudy

aj to je rada

maciii · Příspěvek od **maciii** » 26.srpen 2015 - 9:23

Mám teoretický dotaz

. Když by na DM7020 (OpenaATV) běžel OSCAM s jednou kartou na S**L**K (ICE) zvládne to utáhnout dejme tomu 30-50 userů používajících MGCam 1.38 nebo je to technicky zcela špatně?

milino · Příspěvek od **milino** » 27.srpen 2015 - 17:20

Mám jedenu otázku.Oživujem starý HDIPBox91.Pokušam sa zdielať ICE kartu cez oscam.Skusil som snáď všetko.Typy oscam,confingi a rôzne úpravy a nie a nie sa pripojiť.Pritom sharing na C-linku z vonku uplne v pohode.Zato na vlastnu kartu v domacnosti sa pripojí,ale nič nedekoduje.Zato Dreambox cez Cccam uplne v pohode.
Tušite niekto kde robím chybu?
Diky.

dlhe_pole · Příspěvek od **dlhe_pole** » 27.srpen 2015 - 18:44

kukni na prispevek od marecek29 a hned budes mat jasno

milino · Příspěvek od **milino** » 27.srpen 2015 - 20:33

Ktorý príspevok je ich tu mnoho?Díky

Příspěvek od **marecek29** » 27.srpen 2015 - 20:46

Na teto strance s obrazkem.

milino · Příspěvek od **milino** » 27.srpen 2015 - 20:54

Pochopil:Ked mi to radil "dlhe_pole" čo iná som mohol čakať.Len inteligentnu radu.

Příspěvek od **marecek29** » 27.srpen 2015 - 21:16

Na to jak se ptas ti nikdo jinak neodpovi,nedavas zadny info.

Hypnos · Příspěvek od **Hypnos** » 13.září 2015 - 14:11

Ahoj, stale mam problemy s dekodovanim u oscamu. Bezi treba 1 den, nebo pul hodiny. Jakmile zacnu prepinat mezi programy, tak vse se tvari ze karta dekoduje ale je tma. Pouzivam img OpenPLI, posledni verze a oscam taky tak.
Zde je log a prikladam i configy. Muzete se prosim na to kouknout? Mam podezreni na img, ze ty posled stoji za starou backoru, protoze me to uz udelal i s CCcamem. Proste pri prepnuti najednou tma a konec, ale v info baru a na webovem rozhrani vidim ze normalne cte z karty.

Kód: Vybrat vše

2015/09/13 14:05:11 00000000       (main) starting thread client work
2015/09/13 14:05:11 00000000       (main) client work thread started
2015/09/13 14:05:11 5A940EA6 r   (reader) skylink [cryptoworks] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/09/13 14:05:13 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:13 5A940EA6 r   (reader)   00 
2015/09/13 14:05:13 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:13 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW2: 00
2015/09/13 14:05:13 5A940EA6 r   (reader) skylink [cryptoworks] Answer from cardreader:
2015/09/13 14:05:13 5A940EA6 r   (reader)   90 00 
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IO: Write timeout 496 us, write delay 0 us, to send 5 char(s), chunksize 5 char(s)
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IO: Sending:
2015/09/13 14:05:14 5A940EA6 r   (reader)   A4 44 00 00 2E 
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:14 5A940EA6 r   (reader)   44 
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 12 ETU (496 us)
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit size 46 bytes, expected len 2 bytes, delay 0 us, timeout=496 us
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit:
2015/09/13 14:05:14 5A940EA6 r   (reader)   00 00 2B 83 01 14 C0 1C A0 00 19 19 9F D9 FF B1 
2015/09/13 14:05:14 5A940EA6 r   (reader)   15 7F D2 63 D6 84 D0 A9 A3 5E 4D B5 CC DB A7 10 
2015/09/13 14:05:14 5A940EA6 r   (reader)   F9 55 9C 40 DF 08 EF 74 31 0C 84 92 48 14 
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IO: Write timeout 496 us, write delay 0 us, to send 46 char(s), chunksize 46 char(s)
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IO: Sending:
2015/09/13 14:05:14 5A940EA6 r   (reader)   00 00 2B 83 01 14 C0 1C A0 00 19 19 9F D9 FF B1 
2015/09/13 14:05:14 5A940EA6 r   (reader)   15 7F D2 63 D6 84 D0 A9 A3 5E 4D B5 CC DB A7 10 
2015/09/13 14:05:14 5A940EA6 r   (reader)   F9 55 9C 40 DF 08 EF 74 31 0C 84 92 48 14 
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:14 5A940EA6 r   (reader)   90 
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW1: 90
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:14 5A940EA6 r   (reader)   00 
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW2: 00
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] Answer from cardreader:
2015/09/13 14:05:14 5A940EA6 r   (reader)   90 00 
2015/09/13 14:05:16 5A940EA6 r   (reader)   D1 6A 2C A0 F1 58 D0 98 E1 C3 66 B4 F8 0D 9F 4B 
2015/09/13 14:05:16 5A940EA6 r   (reader)   28 76 0E F4 04 B2 D6 64 CE 01 44 EE DF 08 FC C9 
2015/09/13 14:05:16 5A940EA6 r   (reader)   9B FD 9B D7 97 B3 
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:16 5A940EA6 r   (reader)   90 
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW1: 90
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:16 5A940EA6 r   (reader)   00 
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW2: 00
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] Answer from cardreader:
2015/09/13 14:05:16 5A940EA6 r   (reader)   90 00 
2015/09/13 14:05:16 55503086 c   (dvbapi) New events occurred on 1 of 7 handlers after 195 ms inactivity
2015/09/13 14:05:16 55503086 c   (dvbapi) Now handling fd 8 that reported event 3
2015/09/13 14:05:16 55503086 c   (dvbapi) Received:
2015/09/13 14:05:16 55503086 c   (dvbapi)   86 70 08 A9 FF 83 01 04 84 01 00 
2015/09/13 14:05:16 55503086 c   (dvbapi) Demuxer 0 Filter 3 fetched emm data
2015/09/13 14:05:16 55503086 c      (emm) emm:
2015/09/13 14:05:16 55503086 c      (emm)   86 70 08 A9 FF 83 01 04 84 01 00 
2015/09/13 14:05:16 55503086 c   (reader) skylink [cryptoworks] EMM: reader 0D96 match since emmpid has no provid -> SEND!
2015/09/13 14:05:16 55503086 c   (reader) skylink [cryptoworks] EMM: Entered cryptoworks_get_emm_type ep->emm[0]=86
2015/09/13 14:05:16 55503086 c   (reader) skylink [cryptoworks] EMM: SHARED (Header)
2015/09/13 14:05:16 55503086 c   (reader) skylink [cryptoworks] EMM: shared emm (EMM-SB)
2015/09/13 14:05:16 651913A2 h    (webif) WebIf: Received stale header from 10.0.0.10 (nonce=fb4a63657595ba9ac17f4a1cf9fc5f5a, expectednonce=c27917684f9e372b05d71a73c1c02ee9, opaque=381484120acf78f2e07de17fedf60ba1).
2015/09/13 14:05:16 651913A2 h    (webif) WebIf: Origin checked. Result: access from 10.0.0.10 => allowed
2015/09/13 14:05:16 00000000       (work) start reader thread action 13
2015/09/13 14:05:16 00000000       (main) starting thread client work
2015/09/13 14:05:16 00000000       (main) client work thread started
2015/09/13 14:05:16 5A940EA6 r     (work) data from add_job action=13 client r skylink
2015/09/13 14:05:16 00000000       (main) starting thread client work
2015/09/13 14:05:16 00000000       (main) client work thread started
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IO: Sending:
2015/09/13 14:05:16 5A940EA6 r   (reader)   00 00 43 83 01 0C C0 34 90 00 31 A8 C0 56 5F 74 
2015/09/13 14:05:16 5A940EA6 r   (reader)   9F FA B2 E8 57 23 99 16 AE 77 4A B5 68 01 6A 1D 
2015/09/13 14:05:16 5A940EA6 r   (reader)   FF D1 F9 41 20 F7 D7 D1 9A 1D 7B 7B 45 F6 1E 5A 
2015/09/13 14:05:16 5A940EA6 r   (reader)   9C 59 25 D5 CA 7A 39 1D E5 A7 8C 2E DF 08 BD BF 
2015/09/13 14:05:16 5A940EA6 r   (reader)   A1 B7 51 03 9C DD 
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:16 5A940EA6 r   (reader)   90 
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW1: 90
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:16 5A940EA6 r   (reader)   00 
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW2: 00
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] Answer from cardreader:
2015/09/13 14:05:16 5A940EA6 r   (reader)   90 00 
2015/09/13 14:05:17 55503086 c   (dvbapi) New events occurred on 1 of 7 handlers after 499 ms inactivity
2015/09/13 14:05:17 55503086 c   (dvbapi) Now handling fd 8 that reported event 3
2015/09/13 14:05:17 55503086 c   (dvbapi) Received:
2015/09/13 14:05:17 55503086 c   (dvbapi)   86 70 08 A9 FF 83 01 04 84 01 00 
2015/09/13 14:05:17 55503086 c   (dvbapi) Demuxer 0 Filter 3 fetched emm data
2015/09/13 14:05:17 55503086 c      (emm) emm:
2015/09/13 14:05:17 55503086 c      (emm)   86 70 08 A9 FF 83 01 04 84 01 00 
2015/09/13 14:05:17 55503086 c   (reader) skylink [cryptoworks] EMM: reader 0D96 match since emmpid has no provid -> SEND!
2015/09/13 14:05:17 55503086 c   (reader) skylink [cryptoworks] EMM: Entered cryptoworks_get_emm_type ep->emm[0]=86
2015/09/13 14:05:17 55503086 c   (reader) skylink [cryptoworks] EMM: SHARED (Header)
2015/09/13 14:05:17 55503086 c   (reader) skylink [cryptoworks] EMM: shared emm (EMM-SB)
2015/09/13 14:05:17 00000000       (work) start reader thread action 13
2015/09/13 14:05:17 00000000       (main) starting thread client work
2015/09/13 14:05:17 00000000       (main) client work thread started
2015/09/13 14:05:17 5A940EA6 r     (work) data from add_job action=13 client r skylink
2015/09/13 14:05:17 00000000       (main) starting thread client work
2015/09/13 14:05:17 00000000       (main) client work thread started
2015/09/13 14:05:17 5A940EA6 r   (reader) skylink [cryptoworks] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/09/13 14:05:18 55503086 c   (reader) skylink [cryptoworks] EMM: reader 0D96 match since emmpid has no provid -> SEND!
2015/09/13 14:05:18 55503086 c   (reader) skylink [cryptoworks] EMM: Entered cryptoworks_get_emm_type ep->emm[0]=86
2015/09/13 14:05:18 55503086 c   (reader) skylink [cryptoworks] EMM: SHARED (Header)
2015/09/13 14:05:18 55503086 c   (reader) skylink [cryptoworks] EMM: shared emm (EMM-SB)
2015/09/13 14:05:18 00000000       (work) start reader thread action 13
2015/09/13 14:05:18 00000000       (main) starting thread client work
2015/09/13 14:05:18 00000000       (main) client work thread started
2015/09/13 14:05:18 5A940EA6 r     (work) data from add_job action=13 client r skylink
2015/09/13 14:05:18 00000000       (main) starting thread client work
2015/09/13 14:05:18 00000000       (main) client work thread started
2015/09/13 14:05:18 5A940EA6 r   (reader) skylink [cryptoworks] cardreader_do_checkhealth: reader->card_status = 2, ret = 1

2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:20 5A940EA6 r   (reader)   48 
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 12 ETU (496 us)
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit size 87 bytes, expected len 2 bytes, delay 0 us, timeout=496 us
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit:
2015/09/13 14:05:20 5A940EA6 r   (reader)   00 00 54 80 04 00 12 8F A9 83 01 04 84 01 00 C0 
2015/09/13 14:05:20 5A940EA6 r   (reader)   3C 02 8F A9 00 37 11 52 A7 35 FC 89 C9 C4 C9 B2 
2015/09/13 14:05:20 5A940EA6 r   (reader)   CC 2A 30 0E F9 5B F2 B5 8F 60 C1 DF D0 BC 39 65 
2015/09/13 14:05:20 5A940EA6 r   (reader)   77 9E 7E 7F 2D B0 18 AC 36 40 06 35 99 3D 0B A1 
2015/09/13 14:05:20 5A940EA6 r   (reader)   9A FA 4B 35 7A FC 1C 79 E1 E0 AA D2 A9 DF 08 4B 
2015/09/13 14:05:20 5A940EA6 r   (reader)   3A 4E D8 07 64 0E 0B 
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IO: Write timeout 496 us, write delay 0 us, to send 87 char(s), chunksize 87 char(s)
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IO: Sending:
2015/09/13 14:05:20 5A940EA6 r   (reader)   00 00 54 80 04 00 12 8F A9 83 01 04 84 01 00 C0 
2015/09/13 14:05:20 5A940EA6 r   (reader)   3C 02 8F A9 00 37 11 52 A7 35 FC 89 C9 C4 C9 B2 
2015/09/13 14:05:20 5A940EA6 r   (reader)   CC 2A 30 0E F9 5B F2 B5 8F 60 C1 DF D0 BC 39 65 
2015/09/13 14:05:20 5A940EA6 r   (reader)   77 9E 7E 7F 2D B0 18 AC 36 40 06 35 99 3D 0B A1 
2015/09/13 14:05:20 5A940EA6 r   (reader)   9A FA 4B 35 7A FC 1C 79 E1 E0 AA D2 A9 DF 08 4B 
2015/09/13 14:05:20 5A940EA6 r   (reader)   3A 4E D8 07 64 0E 0B 
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:20 5A940EA6 r   (reader)   90 
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW1: 90
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:20 5A940EA6 r   (reader)   00 
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW2: 00
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] Answer from cardreader:
2015/09/13 14:05:20 5A940EA6 r   (reader)   90 00 
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:21 5A940EA6 r   (reader)   44 
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 12 ETU (496 us)
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit size 70 bytes, expected len 2 bytes, delay 0 us, timeout=496 us
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit:
2015/09/13 14:05:21 5A940EA6 r   (reader)   00 00 43 83 01 1C C0 34 B0 00 31 10 DD C6 D8 84 
2015/09/13 14:05:21 5A940EA6 r   (reader)   C0 DF 27 13 6B 25 CB C6 A1 E2 3C 5B 40 50 C1 E5 
2015/09/13 14:05:21 5A940EA6 r   (reader)   E6 0B 09 75 0C D5 A2 46 26 78 F8 C8 A9 9D 87 10 
2015/09/13 14:05:21 5A940EA6 r   (reader)   A9 4B B0 22 44 8A 88 DB 80 E8 8E C2 DF 08 38 ED 
2015/09/13 14:05:21 5A940EA6 r   (reader)   A6 86 16 6D BF 1E 
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IO: Write timeout 496 us, write delay 0 us, to send 70 char(s), chunksize 70 char(s)
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IO: Sending:
2015/09/13 14:05:21 5A940EA6 r   (reader)   00 00 43 83 01 1C C0 34 B0 00 31 10 DD C6 D8 84 
2015/09/13 14:05:21 5A940EA6 r   (reader)   C0 DF 27 13 6B 25 CB C6 A1 E2 3C 5B 40 50 C1 E5 
2015/09/13 14:05:21 5A940EA6 r   (reader)   E6 0B 09 75 0C D5 A2 46 26 78 F8 C8 A9 9D 87 10 
2015/09/13 14:05:21 5A940EA6 r   (reader)   A9 4B B0 22 44 8A 88 DB 80 E8 8E C2 DF 08 38 ED 
2015/09/13 14:05:21 5A940EA6 r   (reader)   A6 86 16 6D BF 1E 
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:21 5A940EA6 r   (reader)   90 
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW1: 90
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:21 5A940EA6 r   (reader)   00 
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW2: 00
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] Answer from cardreader:
2015/09/13 14:05:21 5A940EA6 r   (reader)   90 00 
2015/09/13 14:05:22 5A940EA6 r   (reader)   1B C2 FA 45 1A 
2015/09/13 14:05:22 5A940EA6 r   (reader) skylink [cryptoworks] IO: Write timeout 496 us, write delay 0 us, to send 53 char(s), chunksize 53 char(s)
2015/09/13 14:05:22 5A940EA6 r   (reader) skylink [cryptoworks] IO: Sending:
2015/09/13 14:05:22 5A940EA6 r   (reader)   00 00 32 83 01 04 C0 23 80 00 20 C3 00 84 01 EE 
2015/09/13 14:05:22 5A940EA6 r   (reader)   48 0E B5 5C F2 BD D1 C1 B7 03 77 D3 20 BD F5 4D 
2015/09/13 14:05:22 5A940EA6 r   (reader)   0A 25 BD D4 11 7A A0 5B EA 78 32 DF 08 9F 50 5F 
2015/09/13 14:05:22 5A940EA6 r   (reader)   1B C2 FA 45 1A 
2015/09/13 14:05:22 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:22 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:22 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:22 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:22 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:22 5A940EA6 r   (reader)   90 
2015/09/13 14:05:22 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:22 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW1: 90
2015/09/13 14:05:22 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:22 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:22 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:22 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:22 5A940EA6 r   (reader)   00 
2015/09/13 14:05:22 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:22 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW2: 00
2015/09/13 14:05:22 5A940EA6 r   (reader) skylink [cryptoworks] Answer from cardreader:
2015/09/13 14:05:22 5A940EA6 r   (reader)   90 00 
2015/09/13 14:05:23 55503086 c   (dvbapi) New events occurred on 1 of 7 handlers after 499 ms inactivity
2015/09/13 14:05:23 55503086 c   (dvbapi) Now handling fd 8 that reported event 3
2015/09/13 14:05:23 55503086 c   (dvbapi) Received:
2015/09/13 14:05:23 55503086 c   (dvbapi)   86 70 08 A9 FF 83 01 04 84 01 00 
2015/09/13 14:05:23 55503086 c   (dvbapi) Demuxer 0 Filter 3 fetched emm data
2015/09/13 14:05:23 55503086 c      (emm) emm:
2015/09/13 14:05:23 55503086 c      (emm)   86 70 08 A9 FF 83 01 04 84 01 00 
2015/09/13 14:05:23 55503086 c   (reader) skylink [cryptoworks] EMM: reader 0D96 match since emmpid has no provid -> SEND!
2015/09/13 14:05:23 55503086 c   (reader) skylink [cryptoworks] EMM: Entered cryptoworks_get_emm_type ep->emm[0]=86
2015/09/13 14:05:23 55503086 c   (reader) skylink [cryptoworks] EMM: SHARED (Header)
2015/09/13 14:05:23 55503086 c   (reader) skylink [cryptoworks] EMM: shared emm (EMM-SB)
2015/09/13 14:05:23 00000000       (work) start reader thread action 13
2015/09/13 14:05:23 00000000       (main) starting thread client work
2015/09/13 14:05:23 00000000       (main) client work thread started
2015/09/13 14:05:23 5A940EA6 r     (work) data from add_job action=13 client r skylink
2015/09/13 14:05:23 00000000       (main) starting thread client work
2015/09/13 14:05:23 00000000       (main) client work thread started
2015/09/13 14:05:23 5A940EA6 r   (reader) skylink [cryptoworks] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/09/13 14:05:23 5A940EA6 r   (reader) skylink [cryptoworks] IO: Write timeout 496 us, write delay 0 us, to send 53 char(s), chunksize 53 char(s)
2015/09/13 14:05:23 5A940EA6 r   (reader) skylink [cryptoworks] IO: Sending:
2015/09/13 14:05:23 5A940EA6 r   (reader)   00 00 32 83 01 0C C0 23 90 00 20 28 49 93 A7 87 
2015/09/13 14:05:23 5A940EA6 r   (reader)   B2 88 F6 E5 4E 30 C7 A7 96 B2 F4 B1 C1 84 06 EC 
2015/09/13 14:05:23 5A940EA6 r   (reader)   89 4A BF 17 D7 85 E0 F1 0C 7A AD DF 08 31 0A 02 
2015/09/13 14:05:23 5A940EA6 r   (reader)   E8 10 AE 46 1E 
2015/09/13 14:05:23 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:23 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:23 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:23 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:23 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:23 5A940EA6 r   (reader)   90 
2015/09/13 14:05:23 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:23 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW1: 90
2015/09/13 14:05:23 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:23 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:23 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:23 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:23 5A940EA6 r   (reader)   00 
2015/09/13 14:05:23 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:23 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW2: 00
2015/09/13 14:05:23 5A940EA6 r   (reader) skylink [cryptoworks] Answer from cardreader:
2015/09/13 14:05:23 5A940EA6 r   (reader)   90 00 
2015/09/13 14:05:24 55503086 c   (dvbapi) New events occurred on 1 of 7 handlers after 397 ms inactivity
2015/09/13 14:05:24 55503086 c   (dvbapi) Now handling fd 8 that reported event 3
2015/09/13 14:05:24 55503086 c   (dvbapi) Received:
2015/09/13 14:05:24 55503086 c   (dvbapi)   86 70 08 A9 FF 83 01 04 84 01 00 
2015/09/13 14:05:24 55503086 c   (dvbapi) Demuxer 0 Filter 3 fetched emm data
2015/09/13 14:05:24 55503086 c      (emm) emm:
2015/09/13 14:05:24 55503086 c      (emm)   86 70 08 A9 FF 83 01 04 84 01 00 
2015/09/13 14:05:24 55503086 c   (reader) skylink [cryptoworks] EMM: reader 0D96 match since emmpid has no provid -> SEND!
2015/09/13 14:05:24 55503086 c   (reader) skylink [cryptoworks] EMM: Entered cryptoworks_get_emm_type ep->emm[0]=86
2015/09/13 14:05:24 55503086 c   (reader) skylink [cryptoworks] EMM: SHARED (Header)
2015/09/13 14:05:24 55503086 c   (reader) skylink [cryptoworks] EMM: shared emm (EMM-SB)
2015/09/13 14:05:24 00000000       (work) start reader thread action 13
2015/09/13 14:05:24 00000000       (main) starting thread client work
2015/09/13 14:05:24 00000000       (main) client work thread started
2015/09/13 14:05:24 5A940EA6 r     (work) data from add_job action=13 client r skylink
2015/09/13 14:05:24 00000000       (main) starting thread client work
2015/09/13 14:05:24 00000000       (main) client work thread started
2015/09/13 14:05:24 5A940EA6 r   (reader) skylink [cryptoworks] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/09/13 14:05:24 5A940EA6 r   (reader)   BF 0D F0 74 89 
2015/09/13 14:05:24 5A940EA6 r   (reader) skylink [cryptoworks] IO: Write timeout 496 us, write delay 0 us, to send 53 char(s), chunksize 53 char(s)
2015/09/13 14:05:24 5A940EA6 r   (reader) skylink [cryptoworks] IO: Sending:
2015/09/13 14:05:24 5A940EA6 r   (reader)   00 00 32 83 01 10 C0 23 98 00 20 D4 E0 BA 81 4A 
2015/09/13 14:05:24 5A940EA6 r   (reader)   58 AF 56 22 09 0D 6C 41 55 DF 60 B7 38 8C D6 92 
2015/09/13 14:05:24 5A940EA6 r   (reader)   50 EB 4E 7D DD DB 8F 33 75 FA 0A DF 08 B0 61 60 
2015/09/13 14:05:24 5A940EA6 r   (reader)   BF 0D F0 74 89 
2015/09/13 14:05:24 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:24 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:24 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:24 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:24 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:24 5A940EA6 r   (reader)   90 
2015/09/13 14:05:24 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:24 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW1: 90
2015/09/13 14:05:24 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:24 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:24 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:24 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:24 5A940EA6 r   (reader)   00 
2015/09/13 14:05:24 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:24 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW2: 00
2015/09/13 14:05:24 5A940EA6 r   (reader) skylink [cryptoworks] Answer from cardreader:
2015/09/13 14:05:24 5A940EA6 r   (reader)   90 00 
2015/09/13 14:05:25 55503086 c   (dvbapi) New events occurred on 1 of 7 handlers after 500 ms inactivity
2015/09/13 14:05:25 55503086 c   (dvbapi) Now handling fd 8 that reported event 3
2015/09/13 14:05:25 55503086 c   (dvbapi) Received:
2015/09/13 14:05:25 55503086 c   (dvbapi)   86 70 08 A9 FF 83 01 04 84 01 00 
2015/09/13 14:05:25 55503086 c   (dvbapi) Demuxer 0 Filter 3 fetched emm data
2015/09/13 14:05:25 55503086 c      (emm) emm:
2015/09/13 14:05:25 55503086 c      (emm)   86 70 08 A9 FF 83 01 04 84 01 00 
2015/09/13 14:05:25 55503086 c   (reader) skylink [cryptoworks] EMM: reader 0D96 match since emmpid has no provid -> SEND!
2015/09/13 14:05:25 55503086 c   (reader) skylink [cryptoworks] EMM: Entered cryptoworks_get_emm_type ep->emm[0]=86
2015/09/13 14:05:25 55503086 c   (reader) skylink [cryptoworks] EMM: SHARED (Header)
2015/09/13 14:05:25 55503086 c   (reader) skylink [cryptoworks] EMM: shared emm (EMM-SB)
2015/09/13 14:05:25 00000000       (work) start reader thread action 13
2015/09/13 14:05:25 00000000       (main) starting thread client work
2015/09/13 14:05:25 00000000       (main) client work thread started
2015/09/13 14:05:25 5A940EA6 r     (work) data from add_job action=13 client r skylink
2015/09/13 14:05:25 00000000       (main) starting thread client work
2015/09/13 14:05:25 00000000       (main) client work thread started
2015/09/13 14:05:25 5A940EA6 r   (reader) skylink [cryptoworks] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:26 5A940EA6 r   (reader)   44 
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 12 ETU (496 us)
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit size 70 bytes, expected len 2 bytes, delay 0 us, timeout=496 us
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit:
2015/09/13 14:05:26 5A940EA6 r   (reader)   00 00 43 83 01 0C C0 34 90 00 31 DC F3 F3 72 24 
2015/09/13 14:05:26 5A940EA6 r   (reader)   B9 C4 AE 8A BA 12 0F D3 C0 49 E2 F1 7A 95 16 B9 
2015/09/13 14:05:26 5A940EA6 r   (reader)   D8 13 8F DC 43 90 43 67 CB 31 84 7D 01 E8 D7 62 
2015/09/13 14:05:26 5A940EA6 r   (reader)   3A 79 9B 83 78 2C 39 31 E5 EA 4D 6E DF 08 25 3C 
2015/09/13 14:05:26 5A940EA6 r   (reader)   E3 68 08 2C 06 4E 
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IO: Write timeout 496 us, write delay 0 us, to send 70 char(s), chunksize 70 char(s)
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IO: Sending:
2015/09/13 14:05:26 5A940EA6 r   (reader)   00 00 43 83 01 0C C0 34 90 00 31 DC F3 F3 72 24 
2015/09/13 14:05:26 5A940EA6 r   (reader)   B9 C4 AE 8A BA 12 0F D3 C0 49 E2 F1 7A 95 16 B9 
2015/09/13 14:05:26 5A940EA6 r   (reader)   D8 13 8F DC 43 90 43 67 CB 31 84 7D 01 E8 D7 62 
2015/09/13 14:05:26 5A940EA6 r   (reader)   3A 79 9B 83 78 2C 39 31 E5 EA 4D 6E DF 08 25 3C 
2015/09/13 14:05:26 5A940EA6 r   (reader)   E3 68 08 2C 06 4E 
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:26 5A940EA6 r   (reader)   90 
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW1: 90
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:26 5A940EA6 r   (reader)   00 
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW2: 00
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] Answer from cardreader:
2015/09/13 14:05:26 5A940EA6 r   (reader)   90 00 
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:27 5A940EA6 r   (reader)   44 
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 12 ETU (496 us)
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit size 70 bytes, expected len 2 bytes, delay 0 us, timeout=496 us
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit:
2015/09/13 14:05:27 5A940EA6 r   (reader)   00 00 43 83 01 08 C0 34 88 00 31 28 33 67 25 D1 
2015/09/13 14:05:27 5A940EA6 r   (reader)   8A 09 9D E5 B6 FA 23 D6 81 57 57 F7 95 E0 DE A2 
2015/09/13 14:05:27 5A940EA6 r   (reader)   E0 67 39 20 14 9F 85 30 55 3B 23 46 10 6A 67 14 
2015/09/13 14:05:27 5A940EA6 r   (reader)   33 83 DB CB 94 D4 CB CE 65 00 C1 BB DF 08 60 81 
2015/09/13 14:05:27 5A940EA6 r   (reader)   B8 AF 81 54 31 7B 
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IO: Write timeout 496 us, write delay 0 us, to send 70 char(s), chunksize 70 char(s)
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IO: Sending:
2015/09/13 14:05:27 5A940EA6 r   (reader)   00 00 43 83 01 08 C0 34 88 00 31 28 33 67 25 D1 
2015/09/13 14:05:27 5A940EA6 r   (reader)   8A 09 9D E5 B6 FA 23 D6 81 57 57 F7 95 E0 DE A2 
2015/09/13 14:05:27 5A940EA6 r   (reader)   E0 67 39 20 14 9F 85 30 55 3B 23 46 10 6A 67 14 
2015/09/13 14:05:27 5A940EA6 r   (reader)   33 83 DB CB 94 D4 CB CE 65 00 C1 BB DF 08 60 81 
2015/09/13 14:05:27 5A940EA6 r   (reader)   B8 AF 81 54 31 7B 
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:27 5A940EA6 r   (reader)   90 
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW1: 90
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:27 5A940EA6 r   (reader)   00 
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW2: 00
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] Answer from cardreader:
2015/09/13 14:05:27 5A940EA6 r   (reader)   90 00 
2015/09/13 14:05:28 651913A2 h    (webif) WebIf: Origin checked. Result: access from 10.0.0.10 => allowed
2015/09/13 14:05:28 00000000       (work) start reader thread action 13
2015/09/13 14:05:28 00000000       (main) starting thread client work
2015/09/13 14:05:28 00000000       (main) client work thread started
2015/09/13 14:05:28 5A940EA6 r     (work) data from add_job action=13 client r skylink
2015/09/13 14:05:28 55503086 c   (dvbapi) New events occurred on 1 of 7 handlers after 604 ms inactivity
2015/09/13 14:05:28 55503086 c   (dvbapi) Now handling fd 8 that reported event 3
2015/09/13 14:05:28 55503086 c   (dvbapi) Received:
2015/09/13 14:05:28 55503086 c   (dvbapi)   86 70 08 A9 FF 83 01 04 84 01 00 
2015/09/13 14:05:28 55503086 c   (dvbapi) Demuxer 0 Filter 3 fetched emm data
2015/09/13 14:05:28 55503086 c      (emm) emm:
2015/09/13 14:05:28 55503086 c      (emm)   86 70 08 A9 FF 83 01 04 84 01 00 
2015/09/13 14:05:28 55503086 c   (reader) skylink [cryptoworks] EMM: reader 0D96 match since emmpid has no provid -> SEND!
2015/09/13 14:05:28 55503086 c   (reader) skylink [cryptoworks] EMM: Entered cryptoworks_get_emm_type ep->emm[0]=86
2015/09/13 14:05:28 55503086 c   (reader) skylink [cryptoworks] EMM: SHARED (Header)
2015/09/13 14:05:28 55503086 c   (reader) skylink [cryptoworks] EMM: shared emm (EMM-SB)
2015/09/13 14:05:28 00000000       (main) starting thread client work
2015/09/13 14:05:28 00000000       (main) client work thread started
2015/09/13 14:05:28 5A940EA6 r   (reader) skylink [cryptoworks] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/09/13 14:05:29 00000000       (work) start reader thread action 13
2015/09/13 14:05:29 00000000       (main) starting thread client work
2015/09/13 14:05:29 00000000       (main) client work thread started
2015/09/13 14:05:29 5A940EA6 r     (work) data from add_job action=13 client r skylink
2015/09/13 14:05:29 00000000       (main) starting thread client work
2015/09/13 14:05:29 00000000       (main) client work thread started
2015/09/13 14:05:29 5A940EA6 r   (reader) skylink [cryptoworks] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:30 5A940EA6 r   (reader)   44 
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 12 ETU (496 us)
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit size 70 bytes, expected len 2 bytes, delay 0 us, timeout=496 us
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit:
2015/09/13 14:05:30 5A940EA6 r   (reader)   00 00 43 83 01 10 C0 34 98 00 31 C8 F4 EF DD 6A 
2015/09/13 14:05:30 5A940EA6 r   (reader)   82 6C 84 EE DF 6A E1 55 72 11 AB B5 B2 AA 8E B4 
2015/09/13 14:05:30 5A940EA6 r   (reader)   A8 72 F7 82 B3 53 F6 9E A7 9F 20 7F 36 48 1B 11 
2015/09/13 14:05:30 5A940EA6 r   (reader)   D7 01 00 88 D8 37 90 03 41 B4 45 F0 DF 08 F1 25 
2015/09/13 14:05:30 5A940EA6 r   (reader)   CF 95 C5 13 0F 33 
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IO: Write timeout 496 us, write delay 0 us, to send 70 char(s), chunksize 70 char(s)
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IO: Sending:
2015/09/13 14:05:30 5A940EA6 r   (reader)   00 00 43 83 01 10 C0 34 98 00 31 C8 F4 EF DD 6A 
2015/09/13 14:05:30 5A940EA6 r   (reader)   82 6C 84 EE DF 6A E1 55 72 11 AB B5 B2 AA 8E B4 
2015/09/13 14:05:30 5A940EA6 r   (reader)   A8 72 F7 82 B3 53 F6 9E A7 9F 20 7F 36 48 1B 11 
2015/09/13 14:05:30 5A940EA6 r   (reader)   D7 01 00 88 D8 37 90 03 41 B4 45 F0 DF 08 F1 25 
2015/09/13 14:05:30 5A940EA6 r   (reader)   CF 95 C5 13 0F 33 
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:30 5A940EA6 r   (reader)   90 
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW1: 90
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:30 5A940EA6 r   (reader)   00 
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW2: 00
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] Answer from cardreader:
2015/09/13 14:05:30 5A940EA6 r   (reader)   90 00 
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 12 ETU (496 us)
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit size 53 bytes, expected len 2 bytes, delay 0 us, timeout=496 us
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit:
2015/09/13 14:05:31 5A940EA6 r   (reader)   00 00 32 83 01 1C C0 23 B0 00 20 71 50 13 C4 6A 
2015/09/13 14:05:31 5A940EA6 r   (reader)   09 83 6B 47 B3 9A E5 D5 C0 85 40 A4 87 DA A5 92 
2015/09/13 14:05:31 5A940EA6 r   (reader)   93 0E 11 D2 95 65 F0 A9 29 E0 42 DF 08 C3 E8 6A 
2015/09/13 14:05:31 5A940EA6 r   (reader)   C3 F0 2A B4 A7 
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] IO: Write timeout 496 us, write delay 0 us, to send 53 char(s), chunksize 53 char(s)
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] IO: Sending:
2015/09/13 14:05:31 5A940EA6 r   (reader)   00 00 32 83 01 1C C0 23 B0 00 20 71 50 13 C4 6A 
2015/09/13 14:05:31 5A940EA6 r   (reader)   09 83 6B 47 B3 9A E5 D5 C0 85 40 A4 87 DA A5 92 
2015/09/13 14:05:31 5A940EA6 r   (reader)   93 0E 11 D2 95 65 F0 A9 29 E0 42 DF 08 C3 E8 6A 
2015/09/13 14:05:31 5A940EA6 r   (reader)   C3 F0 2A B4 A7 
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:31 5A940EA6 r   (reader)   90 
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW1: 90
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:31 5A940EA6 r   (reader)   00 
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW2: 00
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] Answer from cardreader:
2015/09/13 14:05:31 5A940EA6 r   (reader)   90 00 
2015/09/13 14:05:31 00000000       (work) start reader thread action 13
2015/09/13 14:05:31 00000000       (main) starting thread client work
2015/09/13 14:05:31 00000000       (main) client work thread started
2015/09/13 14:05:31 5A940EA6 r     (work) data from add_job action=13 client r skylink
2015/09/13 14:05:31 00000000       (main) starting thread client work
2015/09/13 14:05:31 00000000       (main) client work thread started
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/09/13 14:05:31 00000000       (work) start client thread action 31
2015/09/13 14:05:31 00000000       (main) starting thread client work
2015/09/13 14:05:31 00000000       (main) client work thread started
2015/09/13 14:05:31 55503086 c     (work) data from add_job action=31 client c dvbapiau
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:32 5A940EA6 r   (reader)   44 
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 12 ETU (496 us)
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit size 70 bytes, expected len 2 bytes, delay 0 us, timeout=496 us
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit:
2015/09/13 14:05:32 5A940EA6 r   (reader)   00 00 43 83 01 08 C0 34 88 00 31 D9 59 F8 51 6A 
2015/09/13 14:05:32 5A940EA6 r   (reader)   F3 91 67 C0 9B 5E F1 C7 D3 20 9B C0 F2 67 BC AC 
2015/09/13 14:05:32 5A940EA6 r   (reader)   DD 5B BB 70 F3 C0 E2 FC B6 4E ED 8D 92 AF D9 25 
2015/09/13 14:05:32 5A940EA6 r   (reader)   1F 86 7B F8 7E 32 96 53 3B C3 5D 6D DF 08 E7 E1 
2015/09/13 14:05:32 5A940EA6 r   (reader)   FE 32 2E 94 71 BF 
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IO: Write timeout 496 us, write delay 0 us, to send 70 char(s), chunksize 70 char(s)
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IO: Sending:
2015/09/13 14:05:32 5A940EA6 r   (reader)   00 00 43 83 01 08 C0 34 88 00 31 D9 59 F8 51 6A 
2015/09/13 14:05:32 5A940EA6 r   (reader)   F3 91 67 C0 9B 5E F1 C7 D3 20 9B C0 F2 67 BC AC 
2015/09/13 14:05:32 5A940EA6 r   (reader)   DD 5B BB 70 F3 C0 E2 FC B6 4E ED 8D 92 AF D9 25 
2015/09/13 14:05:32 5A940EA6 r   (reader)   1F 86 7B F8 7E 32 96 53 3B C3 5D 6D DF 08 E7 E1 
2015/09/13 14:05:32 5A940EA6 r   (reader)   FE 32 2E 94 71 BF 
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:32 5A940EA6 r   (reader)   90 
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW1: 90
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:32 5A940EA6 r   (reader)   00 
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW2: 00
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] Answer from cardreader:
2015/09/13 14:05:32 5A940EA6 r   (reader)   90 00 
2015/09/13 14:05:32 651913A2 h    (webif) WebIf: Received stale header from 10.0.0.10 (nonce=c27917684f9e372b05d71a73c1c02ee9, expectednonce=66e9559473ce122576c6a6f383fef8a0, opaque=381484120acf78f2e07de17fedf60ba1).
2015/09/13 14:05:32 651913A2 h    (webif) WebIf: Origin checked. Result: access from 10.0.0.10 => allowed
2015/09/13 14:05:33 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit:
2015/09/13 14:05:33 5A940EA6 r   (reader)   00 00 43 83 01 14 C0 34 A0 00 31 1B E8 A0 DA 22 
2015/09/13 14:05:33 5A940EA6 r   (reader)   4A 1A ED AC FA C6 2F A9 F2 9B 06 31 5F 57 55 60 
2015/09/13 14:05:33 5A940EA6 r   (reader)   EE 1C 4E C8 80 2B 3A CF 57 68 1C DE 73 B4 EA E3 
2015/09/13 14:05:33 5A940EA6 r   (reader)   35 7B B3 B5 AF 90 97 31 09 36 93 A4 DF 08 9D B8 
2015/09/13 14:05:33 5A940EA6 r   (reader)   EB 02 10 2A 27 C2 
2015/09/13 14:05:33 5A940EA6 r   (reader) skylink [cryptoworks] IO: Write timeout 496 us, write delay 0 us, to send 70 char(s), chunksize 70 char(s)
2015/09/13 14:05:33 5A940EA6 r   (reader) skylink [cryptoworks] IO: Sending:
2015/09/13 14:05:33 5A940EA6 r   (reader)   00 00 43 83 01 14 C0 34 A0 00 31 1B E8 A0 DA 22 
2015/09/13 14:05:33 5A940EA6 r   (reader)   4A 1A ED AC FA C6 2F A9 F2 9B 06 31 5F 57 55 60 
2015/09/13 14:05:33 5A940EA6 r   (reader)   EE 1C 4E C8 80 2B 3A CF 57 68 1C DE 73 B4 EA E3 
2015/09/13 14:05:33 5A940EA6 r   (reader)   35 7B B3 B5 AF 90 97 31 09 36 93 A4 DF 08 9D B8 
2015/09/13 14:05:33 5A940EA6 r   (reader)   EB 02 10 2A 27 C2 
2015/09/13 14:05:33 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:33 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:33 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:33 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:33 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:33 5A940EA6 r   (reader)   90 
2015/09/13 14:05:33 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:33 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW1: 90
2015/09/13 14:05:33 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:33 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:33 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:33 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:33 5A940EA6 r   (reader)   00 
2015/09/13 14:05:33 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:33 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW2: 00
2015/09/13 14:05:33 5A940EA6 r   (reader) skylink [cryptoworks] Answer from cardreader:
2015/09/13 14:05:33 5A940EA6 r   (reader)   90 00 
2015/09/13 14:05:34 55503086 c   (dvbapi) New events occurred on 1 of 7 handlers after 500 ms inactivity
2015/09/13 14:05:34 55503086 c   (dvbapi) Now handling fd 8 that reported event 3
2015/09/13 14:05:34 55503086 c   (dvbapi) Received:
2015/09/13 14:05:34 55503086 c   (dvbapi)   86 70 08 A9 FF 83 01 04 84 01 00 
2015/09/13 14:05:34 55503086 c   (dvbapi) Demuxer 0 Filter 3 fetched emm data
2015/09/13 14:05:34 55503086 c      (emm) emm:
2015/09/13 14:05:34 55503086 c      (emm)   86 70 08 A9 FF 83 01 04 84 01 00 
2015/09/13 14:05:34 55503086 c   (reader) skylink [cryptoworks] EMM: reader 0D96 match since emmpid has no provid -> SEND!
2015/09/13 14:05:34 55503086 c   (reader) skylink [cryptoworks] EMM: Entered cryptoworks_get_emm_type ep->emm[0]=86
2015/09/13 14:05:34 55503086 c   (reader) skylink [cryptoworks] EMM: SHARED (Header)
2015/09/13 14:05:34 55503086 c   (reader) skylink [cryptoworks] EMM: shared emm (EMM-SB)
2015/09/13 14:05:34 5A940EA6 r   (reader)   FA D1 C9 6D 8E 
2015/09/13 14:05:34 5A940EA6 r   (reader) skylink [cryptoworks] IO: Write timeout 496 us, write delay 0 us, to send 53 char(s), chunksize 53 char(s)
2015/09/13 14:05:34 5A940EA6 r   (reader) skylink [cryptoworks] IO: Sending:
2015/09/13 14:05:34 5A940EA6 r   (reader)   00 00 32 83 01 04 C0 23 80 00 20 58 8A 63 A6 5E 
2015/09/13 14:05:34 5A940EA6 r   (reader)   DD 1A 89 B8 91 CB 1B 98 D3 36 D7 C3 BB 56 39 BB 
2015/09/13 14:05:34 5A940EA6 r   (reader)   86 85 5C 5A 70 33 29 D0 4B B5 F0 DF 08 43 1C E0 
2015/09/13 14:05:34 5A940EA6 r   (reader)   FA D1 C9 6D 8E 
2015/09/13 14:05:34 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:34 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:34 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:34 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:34 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:34 5A940EA6 r   (reader)   90 
2015/09/13 14:05:34 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:34 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW1: 90
2015/09/13 14:05:34 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:34 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:34 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:34 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:34 5A940EA6 r   (reader)   00 
2015/09/13 14:05:34 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:34 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW2: 00
2015/09/13 14:05:34 5A940EA6 r   (reader) skylink [cryptoworks] Answer from cardreader:
2015/09/13 14:05:34 5A940EA6 r   (reader)   90 00 
2015/09/13 14:05:35 55503086 c   (dvbapi) New events occurred on 1 of 7 handlers after 498 ms inactivity
2015/09/13 14:05:35 55503086 c   (dvbapi) Now handling fd 8 that reported event 3
2015/09/13 14:05:35 55503086 c   (dvbapi) Received:
2015/09/13 14:05:35 55503086 c   (dvbapi)   86 70 08 A9 FF 83 01 04 84 01 00 
2015/09/13 14:05:35 55503086 c   (dvbapi) Demuxer 0 Filter 3 fetched emm data
2015/09/13 14:05:35 55503086 c      (emm) emm:
2015/09/13 14:05:35 55503086 c      (emm)   86 70 08 A9 FF 83 01 04 84 01 00 
2015/09/13 14:05:35 55503086 c   (reader) skylink [cryptoworks] EMM: reader 0D96 match since emmpid has no provid -> SEND!
2015/09/13 14:05:35 55503086 c   (reader) skylink [cryptoworks] EMM: Entered cryptoworks_get_emm_type ep->emm[0]=86
2015/09/13 14:05:35 55503086 c   (reader) skylink [cryptoworks] EMM: SHARED (Header)
2015/09/13 14:05:35 55503086 c   (reader) skylink [cryptoworks] EMM: shared emm (EMM-SB)
2015/09/13 14:05:35 00000000       (work) start reader thread action 13
2015/09/13 14:05:35 00000000       (main) starting thread client work
2015/09/13 14:05:35 00000000       (main) client work thread started
2015/09/13 14:05:35 5A940EA6 r     (work) data from add_job action=13 client r skylink
2015/09/13 14:05:35 00000000       (main) starting thread client work
2015/09/13 14:05:35 00000000       (main) client work thread started
2015/09/13 14:05:35 5A940EA6 r   (reader) skylink [cryptoworks] cardreader_do_checkhealth: reader->card_status = 2, ret = 1

11chloe · Příspěvek od **11chloe** » 13.září 2015 - 14:55

Na konfigách nic divného nevidím a ten log je celkem nečitelný. Nevím kde si ho vzal ale přes webif oscamu bych nastavil debug na 0. Používám OpenPLi na et4000 a problém nemám, takže bych zauvažoval v tvém případě o záloze nastavení a znova to flešnout. Třeba se to srovná.
Pokud chceš mít jistotu že neni něco co by oscamu v konfigách vadilo, tak stačí oscam spustit pouze s jedním konfigem (oscam.conf) a ostatní si doplnit přes webif oscamu.

Hypnos · Příspěvek od **Hypnos** » 13.září 2015 - 18:52

Prave ze jsem zkousel cistou instalaci a jen oscam. A stejne po chvili prepinani tma.
Tamto byl log z oscamu ve verzi all.
v 0 neni nic videt ale dam to sem.

Kód: Vybrat vše

2015/09/13 18:51:36 55503086 c      (ecm) dvbapiau (0D96@000004/0000/1325/80:9CACB63A328017C2581309B08A05294C): found (114 ms) by skylink
2015/09/13 18:51:46 55503086 c      (ecm) dvbapiau (0D96@000004/0000/1325/80:1E88816D057C504F5E95F8F6BC000BD8): found (115 ms) by skylink
2015/09/13 18:51:56 55503086 c      (ecm) dvbapiau (0D96@000004/0000/1325/80:5374784405657F118EC172063439471E): found (112 ms) by skylink
2015/09/13 18:52:06 55503086 c      (ecm) dvbapiau (0D96@000004/0000/1325/80:ADE2C2772FE0164B17A1E2E35FB2313C): found (114 ms) by skylink
2015/09/13 18:52:16 55503086 c      (ecm) dvbapiau (0D96@000004/0000/1325/80:9D88206B8DFE983BF49C527E69766511): found (113 ms) by skylink
2015/09/13 18:52:26 55503086 c      (ecm) dvbapiau (0D96@000004/0000/1325/80:D05B4E1F23325986D8747FF10346D14B): found (114 ms) by skylink
2015/09/13 18:52:36 55503086 c      (ecm) dvbapiau (0D96@000004/0000/1325/80:DB3788BD65C740237616B59BE07B26FA): found (113 ms) by skylink
2015/09/13 18:52:46 55503086 c      (ecm) dvbapiau (0D96@000004/0000/1325/80:2CC90FF3012B6540250CC51945D181AB): found (114 ms) by skylink
2015/09/13 18:52:56 55503086 c      (ecm) dvbapiau (0D96@000004/0000/1325/80:192EFAC7F360D91DD125BE3AC4CA8753): found (115 ms) by skylink

Hypnos · Příspěvek od **Hypnos** » 13.září 2015 - 19:40

Tak jsem tam nahral starsi img OpenPLi-4.0-beta-vusolo-20141102_usb a stejne konfigy. Prepinani je rychlejsi. Uvidim, jestli se to bude chovat stejne. Dam vedet. Pokud by nekoho neco napadlo, nebo mel stejny problem....

Hypnos · Příspěvek od **Hypnos** » 19.září 2015 - 22:13

Problem byl v binarce, musel jsem pouzit starsi konkretne 10134.

pravyroxor · Příspěvek od **pravyroxor** » 08.listopad 2015 - 19:48

Mal by som jeden technický otáznik ohľadne zdielania v LAN, už viem ako fungujú services a ako môžem userovi zakazať zoznam kanalov (napr. platenych) a povoliť mu napr. len zakladnu ponuku stv a pod. Čo mi ale vrta hlavou je otazka blokovania reshare zakladnej ponuky internetoveho readera v LAN, aby sa lokalne boxy nesnazili tahat zakladnu ponuku z internetu ale len z lokalnej ICE karty ! Lebo stalo sa mi ze z internetovej citacky si sosol vedlajsi box zakladnu ponuku rychlejsie ako z lokalnej karty a nerad by som dostal od poskytovatela ban. Vie niekto poradiť

Vďaka

gusto1 · Příspěvek od **gusto1** » 08.listopad 2015 - 21:06

No sak ked vies ako funguju services, tak si to pories cez services

AB-FÓRUM - Satelitné fórum (Satelity, DVB-T/T2, DVB-C, IPTV)

AB-FÓRUM - Satelitné fórum (Satelity, DVB-T/T2, DVB-C, IPTV)

Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)