Oscam a jeho nastavenie (s popisom - testovane v E2)

[dufoq3]

Kód: Vybrat vše

boxkey                        = A1C6F3D8B5E1F2C1
rsakey                        = 79EA25A763DA2C3E02B456A13962E60BCE63E628A2C177BE951CED96A9C6131A146F98D5867B7AE6682324FD6481913C0241F065C8D3457E54BB59B7B5DE0362

pripadne

Kód: Vybrat vše

mhz                           = 500
cardmhz                       = 500

[brancocool]

Dakujem, po zadani BOX, RS zapisy zacali chodit, ale do ECM NOK. Zatial je tma.

[dufoq3]

skus to zadat presne takto a ked to bude normalne fungovat az potom si tam doplnaj dalsie pripadne nastavenia a sam uvidis co robi "zlobu"

Kód: Vybrat vše

[reader]
label                         = skylink_irdeto
protocol                      = internal
device                        = /dev/sci1
caid                          = 0624
boxkey                        = A1C6F3D8B5E1F2C1
rsakey                        = 79EA25A763DA2C3E02B456A13962E60BCE63E628A2C177BE951CED96A9C6131A146F98D5867B7AE6682324FD6481913C0241F065C8D3457E54BB59B7B5DE0362
force_irdeto                  = 1
detect                        = cd
mhz                           = 500
cardmhz                       = 500
group                         = 1
emmcache                      = 1,1,2

[brancocool]

zatial tma
[reader]
label = Irdeto
description = horna citacka
protocol = internal
device = /dev/sci1
autospeed = 0
caid = 0624
boxkey = A1C6F3D8B5E1F2C1
rsakey = 79EA25A763DA2C3E02B456A13962E60BCE63E628A2C177BE951CED96A9C6131A146F98D5867B7AE6682324FD6481913C0241F065C8D3457E54BB59B7B5DE0362
fix07 = 0
force_irdeto = 1
detect = cd
mhz = 500
cardmhz = 500
group = 1
emmcache = 1,1,2,0
auprovid = 000004

[brancocool]

zatial tma
[reader]
label = Irdeto
description = horna citacka
protocol = internal
device = /dev/sci1
autospeed = 0
caid = 0624
boxkey = A1C6F3D8B5E1F2C1
rsakey = 79EA25A763DA2C3E02B456A13962E60BCE63E628A2C177BE951CED96A9C6131A146F98D5867B7AE6682324FD6481913C0241F065C8D3457E54BB59B7B5DE0362
fix07 = 0
force_irdeto = 1
detect = cd
mhz = 500
cardmhz = 500
group = 1
emmcache = 1,1,2,0
auprovid = 000004

[dufoq3]

tak este raz: skus to zadat presne takto a ked to bude normalne fungovat az potom si tam doplnaj dalsie pripadne nastavenia a sam uvidis co robi "zlobu"

[brancocool]

dufam, ze uz tam mam vsetko rovnako, okrem menovky
label = Irdeto
protocol = internal
device = /dev/sci1
autospeed = 0
caid = 0624
boxkey = A1C6F3D8B5E1F2C1
rsakey = 79EA25A763DA2C3E02B456A13962E60BCE63E628A2C177BE951CED96A9C6131A146F98D5867B7AE6682324FD6481913C0241F065C8D3457E54BB59B7B5DE0362
force_irdeto = 1
detect = cd
mhz = 500
cardmhz = 500
group = 1
emmcache = 1,1,2,0
read_old_classes = 0

[dufoq3]

mas tam min 2 riadky naviac. Kazdopadne ked to konecne nastavis podla toho ako pisem, skus dat reauthorizovat kartu cez skylink web.

[brancocool]

ked myslis riadok read_old_classes = 0 ten je uz v tychto novych verziach. je to koli Viaccess.
Riadok autospeed ked je na 1 neda sa zmenit frekvenicia citacky. Resp. po restarte oscamu sa vrati na 450/2700

[dufoq3]

Kartu si reauthorizoval cez skylink web? Celkom ma nebavi sa opakovat... ale zas stale je tu vela uzivatelov, ktori ti radi pomozu. Vela stastia

[brancocool]

Samozrejme, dnes vecer uz min 5x. Ver tomu, ze ani mna nie a preto som rad, ze si sa mi venoval.

[11chloe]

V záložce readers musíš vidět jak přibejvaj written zápisy.

[brancocool]

Viem, ze by mali, ale jedine kde pribudaju su NOK, vsetko ostatne je na nule.
Ale v livelogu je to chaos:
2016/03/15 21:13:39 6C574216 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 3 disabled ecmpids!
2016/03/15 21:13:39 6C574216 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0624 PROVID 000000 ECMPID 1483 ANY CHID PMTPID 1389 VPID 1393
2016/03/15 21:13:40 6C574216 c (ecm) anonymous (0624@000000/0000/1325/55:D6775DEF01E6755BE1C0A0BE4BEA6BB0): not found (2 ms) by Irdeto
2016/03/15 21:13:40 6C574216 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 3 disabled ecmpids!
2016/03/15 21:13:40 6C574216 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0624 PROVID 000000 ECMPID 1483 ANY CHID PMTPID 1389 VPID 1393
2016/03/15 21:13:41 6C574216 c (ecm) anonymous (0624@000000/0000/1325/55:D6775DEF01E6755BE1C0A0BE4BEA6BB0): not found (1 ms) by Irdeto
2016/03/15 21:13:41 29B26A6A r (reader) Irdeto [irdeto] Maybe you don't have the entitlements for this channel
2016/03/15 21:13:41 6C574216 c (ecm) anonymous (0624@000000/0000/1325/55:652293791FDAB9AB16AB7A670BF5A525): not found (100 ms) by Irdeto
2016/03/15 21:13:41 6C574216 c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 3 disabled ecmpids!
2016/03/15 21:13:41 6C574216 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0624 PROVID 000000 ECMPID 1483 ANY CHID PMTPID 1389 VPID 1393
snazi sa dekodovat....
som zvedavy kde budem mat chybu.

[11chloe]

Máš to blbě nastavené a dokud to nenastavíš aby ti chodily zápisy tak bude tma. Musíš nastavit správně dvbapi a s tím i usera. Pak bys měl mít v záložce status pod sloupcem AU jak u usera tak čtečky ON. Až začnou chodit tak se změní ON na ACTIVE a začnou přibejvat i pod readers (written).
Podle logu je to jasné. Žádného usera nastaveného nemáš. Přes anonymous ale zápisy nepošle.

[brancocool]

Takze problem bol naozaj v nastaveni dvbapi a to sice v jeho nazve nebolo nic a bez toho to neslo.
Dakujem dufoq3 a aj tebe 11chloe za vas cas a ochotu!

[dufoq3]

nepisal si nahodou, ze ti to s ICE kartou fungovalo? Nemohlo ak si mal zly nazov dvbapi.

[brancocool]

To sme sa nepochopili, ICE mam funkcnu na druhom VU SOLO SE v2. Teraz som na novo spojazdnoval SOLO2 bo uz potreboval full reinstall a stiahol som dondo z VTI menu verziu oscamu 11211 a akosi som si nevsimol, ze v nastaneniach nebol pomenovany user: dvbapi. Zameral som sa na readers a taku "drobnost" som prehliadol.

[dufoq3]

aspon ze vyriesene

[brancocool]

vdaka vam chlapci som to spojazdnil...
tu je aktualny konfig s ktorym mi to funguje (mozno to pomoze niekomu) a POZOR NA POMENOVANIE dvbapi !
[reader]
label = Irdeto
protocol = internal
device = /dev/sci1
caid = 0624
boxkey = A1C6F3D8B5E1F2C1
rsakey = 79EA25A763DA2C3E02B456A13962E60BCE63E628A2C177BE951CED96A9C6131A146F98D5867B7AE6682324FD6481913C0241F065C8D3457E54BB59B7B5DE0362
force_irdeto = 1
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,1,2,0

[maros01]

Zdravim, mam prosbu.
Potrebujem nastavit prepojenie 2x Prismcube s oscamom a jedna Skylink ICE karta. Urcite to tu je niekde napisane, ale nividim. Ďakujem.