ubuntu 14.04

[gusto1]

Ja som po dlhsom case skusil simplebuild (KVM debian 9 64bit) a ponuklo mi update, tak som blbo klikol na update a uz to bolo v p***
Tak som skusil S3 a S3 funguje, ale tiez s tym nie som velmi spokojny, blbne to v tom, ze sa to tvari ako by kompilovalo, ale binarku nevytvori. Ina starsia ver. sa neda vytvorit atd ... (skusal som len native).

[gusto1]

Ak by bolo viac casu, skusim rucnu kompilaciu

[gusto1]

moze niekto skusit, nieco sa podarilo (zo starym simplebuild) na mipsel a dajte vediet

[peter54]

Ide

Unix starttime: 1554196488
Starttime: 02.04.2019 11:14:48
Version: oscam-1.20_svn-r11507
Compiler: mipsel-openpli40-linux-gnu
Box type: formuler4turbo (generic)
PID: 25793

[gusto1]

Ide

Unix starttime: 1554196488
Starttime: 02.04.2019 11:14:48
Version: oscam-1.20_svn-r11507
Compiler: mipsel-openpli40-linux-gnu
Box type: formuler4turbo (generic)
PID: 25793

u mna to nejde (Segmentation fault) neviem ci mam nejaky blby img, alebo co

[dlhe_pole]

Ide

Unix starttime: 1554196488
Starttime: 02.04.2019 11:14:48
Version: oscam-1.20_svn-r11507
Compiler: mipsel-openpli40-linux-gnu
Box type: formuler4turbo (generic)
PID: 25793

u mna to nejde (Segmentation fault) neviem ci mam nejaky blby img, alebo co

gusto gusto ..
Segmentation fault = binarka pre inu platformu.. zrejme jak to robis pod ubuntu pre mipsel tak mas blbo nastavene cesty pre croscompiler a tym padom ti vypluva furt binarku pre x64 alebo x32 aj ked sa snazis kompilovat pre mipsel. ci je to tak uvidis ked si otvoris binarku v hocijakom hexa editore

[peter54]

Ja to skor vidim na blbe verzie kniznic.

root@pipc:~/opt/simplebuild/archiv# file oscam-svn11507-openpli40-webif
oscam-svn11507-openpli40-webif: ELF 32-bit LSB executable, MIPS, MIPS-I version 1 (SYSV), dynamically linked, interpreter /lib/ld.so.1,
tripped

Tu je priklad, co sa stane ked sa pokusis spustit mips binarku na arm.

root@pipc:~/opt/simplebuild/archiv# ./oscam-svn11507-openpli40-webif
-bash: ./oscam-svn11507-openpli40-webif: cannot execute binary file: Exec format error

Keby nebola spravny format, tak nepobezi na mojom f4t.

12

Kód: Vybrat vše

@pipc:~/opt/simplebuild/archiv# cat oscam-svn11507-openpli40-webif |xxd|head
00000000: 7f45 4c46 0101 0100 0000 0000 0000 0000  .ELF............
00000010: 0200 0800 0100 0000 008f 4000 3400 0000  ..........@.4...
00000020: 741a 1200 0710 0000 3400 2000 0900 2800  t.......4. ...(.
00000030: 1d00 1c00 0600 0000 3400 0000 3400 4000  ........4...4.@.
00000040: 3400 4000 2001 0000 2001 0000 0500 0000  4.@. ... .......
00000050: 0400 0000 0300 0000 5401 0000 5401 4000  ........T...T.@.
00000060: 5401 4000 0d00 0000 0d00 0000 0400 0000  T.@.............
00000070: 0100 0000 0100 0000 0000 0000 0000 4000  ..............@.
00000080: 0000 4000 1ca8 1100 1ca8 1100 0500 0000  ..@.............
00000090: 0000 0100 0100 0000 54b4 1100 54b4 5200  ........T...T.R.

root@pipc:~/opt/simplebuild/archiv# objdump -p oscam-svn11507-openpli40-webif |grep NEEDED
NEEDED libm.so.6
NEEDED libpthread.so.0
NEEDED libdl.so.2
NEEDED libc.so.6

[rudich]

simplebuild a simplebuild s3-ok

[Steiner]

gusto, disable UPX po kompilacii , alebo binarku od-upx-uj
"upx -d xxxxxxx"
a vyskúšaj
to bude "Segmentation fault"

[gusto1]

binarka neni komprimovana

Kód: Vybrat vše

UPX 3.91        Markus Oberhumer, Laszlo Molnar & John Reiser   Sep 30th 2013

        File size         Ratio      Format      Name
   --------------------   ------   -----------   -----------
upx: oscam-svn11507-openpli40-webif: NotPackedException: not packed by UPX

[peter54]

Konecne som si splnil sen.
Pokusy s Hyper-V od malého mäkkého boli neúspešné, niečo som asi nepochopil.
Vo VirtualBox na 10 oknách som rozbehal debian a uspesne vyrobil oscam pre moj f4t. Vsetko instalovane 1.5.2019.
Potvrdene - 64 bit windows 10, debian a novucky s3 - vsetko funguje.
http://www.satnigmo.com/2264/compile-os ... ld-script/
https://www.debian.org/distrib/ debian som instaloval z iso 64bitový iso obraz síťového instalátoru pro PC
Este skusim ubuntu, mozno sa mi viac zapáči.

virtual_box.png

Kód: Vybrat vše

Linux debian 4.9.0-9-amd64 #1 SMP Debian 4.9.168-1 (2019-04-12) x86_64

    _________________
   /   _____/\_____  \   ===============
   \_____  \   _(__  <   Version 3.0 RC5
   /        \ /       \  ===============
  /_______  //______  /  by gorgone 2019
          \/        \/   ===============

  --------------------------------------
  begin with ./s3 menu
  commandline Parameters are
  --------------------------------------

Kód: Vybrat vše

  root@debian:/opt/s3# ls -ltr binaries/*
-rwxr-xr-x 1 root root 2197456 May  2 14:39 binaries/oscam-svn11517-openpli40-webif-dvbapi
-rwxr-xr-x 1 root root 2205828 May  2 14:45 binaries/oscam-svn11517-openpli40-webif-dvbapi-ssl
-rwxr-xr-x 1 root root  630940 May  2 15:10 binaries/oscam-svn11517-openpli40-webif-dvbapi-ssl-upx
root@debian:/opt/s3#    

Všetky binarky sú funkčné, samozrejme som nasadil tú poslednú.

Kód: Vybrat vše

Unix starttime: 1556803257
Starttime:      02.05.2019 15:20:57
Version:        oscam-1.20_svn-r11517
Compiler:       mipsel-openpli40-linux-gnu-ssl
Box type:       formuler4turbo (generic)
PID:            14508
TempDir:        /tmp/.oscam
ConfigDir:      /etc/tuxbox/config/oscam/
WebifPort:      8888

[liquere]

Asi 2 tyzdne dozadu som skusal ubuntu cez wmplayer, ale s3 nesla instalovat. Linux bezi. Zeby nieco opravili, az budem mat cas skusim zase. Ktory link ti nabehol? Mne nesiel ani jeden stary ani novy.

[peter54]

Hura, uz mam aj ubuntu - do poctu.
V navode je to trocha domotane - treba to robit takto:

Kód: Vybrat vše

root@peter-ubuntu:/opt# wget -O simplebuild.sh http://s3.is-by.us/now.sh
--2019-05-03 20:39:36--  http://s3.is-by.us/now.sh
Resolving s3.is-by.us (s3.is-by.us)... 193.16.217.9
Connecting to s3.is-by.us (s3.is-by.us)|193.16.217.9|:80... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: https://s3.is-by.us/now.sh [following]
--2019-05-03 20:39:36--  https://s3.is-by.us/now.sh
Connecting to s3.is-by.us (s3.is-by.us)|193.16.217.9|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 4676 (4,6K) [application/x-sh]
Saving to: ‘simplebuild.sh’

simplebuild.sh                       100%[====================================================================>]   4,57K  --.-KB/s    in 0s

2019-05-03 20:39:36 (12,9 MB/s) - ‘simplebuild.sh’ saved [4676/4676]

root@peter-ubuntu:/opt# chmod 777 simplebuild.sh
root@peter-ubuntu:/opt# ./simplebuild.sh debinstall

  _________.__                  .__          ___.           .__ .__       .___
 /   _____/|__|  _____  ______  |  |    ____ \_ |__   __ __ |__||  |    __| _/
 \_____  \ |  | /     \ \____ \ |  |  _/ __ \ | __ \ |  |  \|  ||  |   / __ |
 /        \|  ||  Y Y  \|  |_> >|  |__\  ___/ | \_\ \|  |  /|  ||  |__/ /_/ |
/_______  /|__||__|_|  /|   __/ |____/ \___  >|___  /|____/ |__||____/\____ |
        \/           \/ |__|               \/     \/                       \/
                                   ________
                                   \_____  \
                                     _(__  <
                                    /       \
                                   /______  /       2019 by Gorgone
                                          \/
                Install starts in 0 s. press ctrl + c to stop

 Installdir LOCATION
 ===================

 1 = default  /opt/s3
 2 = HOME dir /root/s3
 3 = custom directory
 ? = 1 Default Installdir /opt/s3
 -> create /opt/s3

 please wait
 download s3 rc5.1 100% done...
 verify file s3_rc5.1.tar.gz: OK

  _    _ _______   __
 | |  | |  __ \ \ / /
 | |  | | |__) \ V /
 | |  | |  ___/ > <
 | |__| | |    / . \
  \____/|_|   /_/ \_\
 ====================
  SELECT Compression
 ====================

   (1) -1 fast
   (5) -5 normal
   (9) -9 strong
   (b) --best

 ->5
perform now syscheck & checkout ?

 1 = YES | 2 NO

 ? = 1 do syscheck & checkout

    ___  ____   ___
   / _ \/ ___| / __|__ _ _ __ ___
  | | | \___ \| |  / _` | '_ ` _ \
  | |_| |___) | |_| (_| | | | | | |
   \___/|____/ \___\__,_|_| |_| |_|


  no oscam-svn found

  SVN TrunkURL  : http://www.streamboard.tv/svn/oscam/trunk
  SVN FileCount : found 720
  SVN checkout  : 100%
  SVN Revision  : 11517
  SVN UserPath  : /opt/s3/oscam-svn
  SVN Backup    : done


  goto /opt/s3
  run -> ./s3
  for help

root@peter-ubuntu:/opt#  cd s3
root@peter-ubuntu:/opt/s3# ./s3
....
    _________________
   /   _____/\_____  \   ===============
   \_____  \   _(__  <   Version 3.0 RC5
   /        \ /       \  ===============
  /_______  //______  /  by gorgone 2019
          \/        \/   ===============

  --------------------------------------
  begin with ./s3 menu
  commandline Parameters are
  --------------------------------------

  toolchains :
  ------------
  arm_dream arm_s3_ssl098 arm_s3_ssl100
  arm_s3_ssl102 dockstar dreambox_fpu
  fritz73xxOS65 fritz74xxOS65 hd51 ineos
  mca mipsel mipsel_s3_ssl098 mipsel_s3_ssl100
  mipsel_s3_ssl102 mipsoe20 native openpli40
  openwrt1505cc osmio4k ppcold rasb_hard
  samsungtv sh4 sh_4 solo4k syn_atom

  simplebuild options :
  ---------------------
  help cedit clean tccheck tcrepair
  upload lang_select loadonly checkout
  ssh_profiles syscheck sysinfo svnup
  menu get_patch tedit svnpatch profiles
  svnrestore
  [ENTER] to continue...^C
root@peter-ubuntu:/opt/s3# ./s3 menu
....

simplebuild.png

ubuntu.png

[liquere]

Snad sa k tomu dostanem, na win7 som mal ubuntu LTS a Zorina. Chodilo to na obidvoch. Teraz som chcel s3 dat na win 10 a neslo to. Skusim ked bude cas .......

[gusto1]

Neviem aky dovod mate vobec pouzivat nieco od MS. Ja uz roky fungujem na linuxe, ako na desktope, tak na servery a na win som uz aj zabudol, ze vobec existuje. Uz si neviem predstavit robit nieco na win (drobne aplikacie pre win emulujem cez wine (ale to pouzivam len zriedka)).
Virtualizujem na debiane pomocou proxmoxu, jak kvm/qemu, tak kontajnery (LXC).

Mate realny dovod pouzivat MS win ?

[mtester270]

Gusto gusto to su otazky . Odpoved zalezi na tom co clovek robi za pracu (ci rukami alebo hlavou). Kebyze nemam okna tak nemam pracu a vela korporacii bezi na MS tech. takze ak pre nich robis tak mas jasno. Linux je pre fajnsmekrov a potom na bavecku tym nemyslim ze je zly ale da sa tam navymyslat kadejaka "hracicka" ak ma clovek cas.

[peter54]

Dovodov je dost - mtester udal velmi dôležitý. Sú aj dalsie, ale myslím, ze diskusia preco 99% desktopov běží na ms softe snad do témy oscam nepatrí.
Poprosím adminov to odtial prehodiť niekam inam, alebo rovno zmazať.

[liquere]

Tak s3 sa podarilo rozbehat na Ubuntu aj Zorine, aj ked vsade iny postup, proste chaos. Ale samotna kompilacia oscamu pada, komu to ide na com?
Ubuntu posledna verzia LTS 18.4.2 tusim
Zorin posledny

Na win7 stary simple isiel v pohode ...... no da sa nepit???

[liquere]

No vidis potom, ze vsetko novsie je lepsie ........... ale radsej nic lebo zase skoncime inde .......

[peter54]

Kompiloval som nativ oscam na 64 bit debiane bez s3.
Potom mipsel-openpli40-linux-gnu-ssl na tom debiane aj na ubuntu.
Ziadne padanie sa nekonalo.
Možno si pridelil malo pamate?
V windows 10 mam 8gb a linuxom som doprial po 2gb.
Emu som neskusal.
Napis, čo ti neide - ktory toolchain a tak dalej a vyskúšam.