NAVOD : Ubuntu server + Oscam + SMARGO reader, ako na to?

[11chloe]

Pak je to jen o právech a pokud o tom nic nevíš tak si to nejdřív nastuduj. A hlavně potřebuješ rootovská práva přes sudo.
Nakonec on ten oscam pojede i z toho /home/user.

[peter54]

Skus pre bžundu sudo bash. Ak ti to prejde tak mozes robit uz uplne vsetko.

[mimato]

ten comander cez putty vyskúšam,
čo sa týka práv tak sudo používam pred každý príkaz, samozrejme aj hľadám a študujem pokiaľ mi čas dovolí, ale ten linux je na dlhé nočné večeri
každopádne Vám zatiaľ všetkým ďakujem za pomoc

[AlfredoJ]

Zdravím, asi blbej dotaz, instalace Ubuntu OK, oscam taky běží ale nevím jak rozchodit SmartReager V2. Co kde nainstalovat a jak nakonfigurovat. Pomůže někdo? Díky moc

[AlfredoJ]

za dobrou radu rád zaplatím...

[AlfredoJ]

tak asi už jsem to vyřešeil ale ještě dotaz, všechny čtečky se mi v oscam vypínají, když je ručně zapnu, do 10 sekund se vypnout

[peter54]

To robi oscam v sebeobrane. Pozri do logu a uvidis ze je to tym, ze nepresla inicializacia.

[AlfredoJ]

a jak vyřešit?

2017/06/08 15:32:23 1091F5AC r (reader) USB_ctecka [smartreader] Smartreader device 007:002 not found
2017/06/08 15:32:23 1091F5AC r (reader) USB_ctecka [smartreader] Cannot open device: 007:002

[petersk]

2017/06/08 15:32:23 1091F5AC r (reader) USB_ctecka [smartreader] Cannot open device: 007:002
Oscam Ti nenašiel čítačku.

[AlfredoJ]

teď by to asi jelo... koukne někdo????

2017/06/08 16:07:13 00000000 s (main) System name = Linux
2017/06/08 16:07:13 00000000 s (main) Host name = oscamsrv
2017/06/08 16:07:13 00000000 s (main) Release = 4.4.0-62-generic
2017/06/08 16:07:13 00000000 s (main) Version = #83-Ubuntu SMP Wed Jan 18 14:10:15 UTC 2017
2017/06/08 16:07:13 00000000 s (main) Machine = x86_64
2017/06/08 16:07:13 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 3746
2017/06/08 16:07:13 00000000 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
2017/06/08 16:07:13 00000000 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2017/06/08 16:07:13 00000000 s (main) signal handling initialized
2017/06/08 16:07:13 00000000 s (config) 3 tier-id's loaded
2017/06/08 16:07:13 00000000 s (config) 5 lengths for caid guessing loaded
2017/06/08 16:07:13 00000000 s (net) cccam: initialized (fd=5, port=12003)
2017/06/08 16:07:13 00000000 s (reader) karta1 [smargo] creating thread for device /dev/ttyUSB0
2017/06/08 16:07:13 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2017/06/08 16:07:13 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2017/06/08 16:07:13 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2017/06/08 16:07:13 00000000 s (anticasc) anti cascading disabled
2017/06/08 16:07:13 48808271 h (webif) webif: decompressed 184522 bytes back into 434792 bytes
2017/06/08 16:07:13 48808271 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
2017/06/08 16:07:13 1091F5AC r (reader) karta1 [smargo] Buffers readed 0 bytes total time_us 75102
2017/06/08 16:07:13 1091F5AC r (reader) karta1 [smargo] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz= AUTO, cardmhz=600)
2017/06/08 16:07:13 6497CBBF c (client) encrypted cccam-client 192.168.201.13 granted (oscamOV, au=off)
2017/06/08 16:07:14 1091F5AC r (reader) karta1 [smargo] card detected
2017/06/08 16:07:14 6497CBBF c (ecm) oscamOV (0D96@000004/0000/13B1/80:6C5C8264DF963E6D5637B4DAA4DC9904): rejected group (0 ms) (no matching reader)
2017/06/08 16:07:14 6497CBBF c (ecm) oscamOV (0D96@000004/0000/0305/80:D87AF7FB9FB2B6DA62975F3D1628E6DE): rejected group (0 ms) (no matching reader)
2017/06/08 16:07:14 6497CBBF c (ecm) oscamOV (0D96@000004/0000/13B6/80:3AEB913591A8C49E3FA774028BBAFB91): rejected group (0 ms) (no matching reader)
2017/06/08 16:07:15 6497CBBF c (ecm) oscamOV (0D96@000004/0000/1F41/80:436AA9187FC23A05D64FCD1034D5D7A9): rejected group (0 ms) (no matching reader)
2017/06/08 16:07:15 6497CBBF c (ecm) oscamOV (0D96@000004/0000/1F45/80:015AF23F354876CD7958FC8255E72D11): rejected group (0 ms) (no matching reader)
2017/06/08 16:07:15 6497CBBF c (ecm) oscamOV (0D96@000004/0000/1F44/80:80BE7D37FF4A21ADEEC3475DC109637E): rejected group (0 ms) (no matching reader)
2017/06/08 16:07:16 1091F5AC r (reader) karta1 [smargo] ATR: 3B 9F 11 40 60 49 52 44 45 54 4F 20 41 43 53 20 56 36 2E 30
2017/06/08 16:07:16 1091F5AC r (reader) karta1 [smargo] Init card protocol T0, FI=1, F=372, D=1, N=0
2017/06/08 16:07:16 1091F5AC r (reader) karta1 [smargo] Calculated work ETU is 69.66 us reader mhz = 534
2017/06/08 16:07:16 1091F5AC r (reader) karta1 [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)
2017/06/08 16:07:17 6497CBBF c (ecm) oscamOV (0D96@000004/0000/3391/80:B68BCFE6C1FA97417DAD3F34815625E3): rejected group (0 ms) (no matching reader)
2017/06/08 16:07:17 6497CBBF c (ecm) oscamOV (0D96@000004/0000/3392/80:97733121259E21326F7C8323160964C0): rejected group (0 ms) (no matching reader)
2017/06/08 16:07:17 1091F5AC r (reader) karta1 [smargo] Hist. Bytes: IRDETO ACS V6.0
2017/06/08 16:07:17 1091F5AC r (reader) karta1 [smargo] detect irdeto card
2017/06/08 16:07:17 1091F5AC r (reader) karta1 [smargo] WARNING: ACS57 card can require the CamKey from config
2017/06/08 16:07:17 1091F5AC r (reader) karta1 [smargo] caid: 0624, acs: 0.06, country code: CZE
2017/06/08 16:07:17 1091F5AC r (reader) karta1 [smargo] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2017/06/08 16:07:18 1091F5AC r (reader) karta1 [smargo] You have a bad Cam Key set
2017/06/08 16:07:18 1091F5AC r (reader) karta1 [smargo] card system not supported
2017/06/08 16:07:18 1091F5AC r (reader) karta1 [smargo] Normal mode failed, reverting to Deprecated Mode
2017/06/08 16:07:20 1091F5AC r (reader) karta1 [smargo] ATR: 3B 9F 11 40 60 49 52 44 45 54 4F 20 41 43 53 20 56 36 2E 30
2017/06/08 16:07:20 1091F5AC r (reader) karta1 [smargo] Init card protocol T0, FI=1, F=372, D=1, N=0
2017/06/08 16:07:20 1091F5AC r (reader) karta1 [smargo] Calculated work ETU is 69.66 us reader mhz = 534
2017/06/08 16:07:20 1091F5AC r (reader) karta1 [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)
2017/06/08 16:07:21 1091F5AC r (reader) karta1 [smargo] Hist. Bytes: IRDETO ACS V6.0
2017/06/08 16:07:21 1091F5AC r (reader) karta1 [smargo] detect irdeto card
2017/06/08 16:07:21 1091F5AC r (reader) karta1 [smargo] WARNING: ACS57 card can require the CamKey from config
2017/06/08 16:07:21 1091F5AC r (reader) karta1 [smargo] caid: 0624, acs: 0.06, country code: CZE
2017/06/08 16:07:22 1091F5AC r (reader) karta1 [smargo] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2017/06/08 16:07:22 1091F5AC r (reader) karta1 [smargo] You have a bad Cam Key set
2017/06/08 16:07:22 1091F5AC r (reader) karta1 [smargo] card system not supported
2017/06/08 16:07:22 1091F5AC r (reader) karta1 [smargo] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2017/06/08 16:07:22 1091F5AC r (reader) karta1 [smargo] card initializing error
2017/06/08 16:07:50 6497CBBF c (client) oscamOV disconnected from 192.168.201.13
2017/06/08 16:07:50 7247A53B c (client) encrypted cccam-client 192.168.201.13 granted (oscamOV, au=off)

[petersk]

Najprv si nastav čítačku a kartu v nej. Povypínaj si zatiaľ klientov, emu a pod.. Aký device si tam dal? Mieša sa Ti 0D96 a 0624.

[AlfredoJ]

[reader]
label = karta1
description =
enable = 1
protocol = smargo
device = /dev/ttyUSB0

karta je tam ICE 0D96

[AlfredoJ]

tak jsem to částečně rozchodil, čtečka už čte kartu .... ale klient který se připojí nedekoduje kanaly
Čtečka je ve Status - CARDOK - ale ECM-OK je 0%, ECM-NOK je 0%, ECM TOUT je taky 0%, vůbec si s tím nevím rady...

[AlfredoJ]

zde je výpis logu, nevíte někdo kde by mohla být chyba???

2017/06/09 13:03:36 00000000 s (main) System name = Linux
2017/06/09 13:03:36 00000000 s (main) Host name = ubuntuoscam
2017/06/09 13:03:36 00000000 s (main) Release = 4.4.0-62-generic
2017/06/09 13:03:36 00000000 s (main) Version = #83-Ubuntu SMP Wed Jan 18 14:09:55 UTC 2017
2017/06/09 13:03:36 00000000 s (main) Machine = i686
2017/06/09 13:03:36 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 22914
2017/06/09 13:03:36 00000000 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
2017/06/09 13:03:36 00000000 s (config) userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2017/06/09 13:03:36 00000000 s (main) signal handling initialized
2017/06/09 13:03:36 00000000 s (config) 123 service-id's loaded in 0 ms
2017/06/09 13:03:36 00000000 s (config) 3 tier-id's loaded
2017/06/09 13:03:36 00000000 s (config) 5 lengths for caid guessing loaded
2017/06/09 13:03:36 00000000 s (net) cccam: initialized (fd=6, port=12003)
2017/06/09 13:03:36 00000000 s (reader) skylink [smargo] creating thread for device /dev/ttyUSB0
2017/06/09 13:03:36 00000000 s (main) waiting for local card init
2017/06/09 13:03:36 456E60CC h (webif) webif: decompressed 182761 bytes back into 433032 bytes
2017/06/09 13:03:36 456E60CC h (webif) HTTP Server running. ip=0.0.0.0 port=9999
2017/06/09 13:03:36 6E8242D9 r (reader) skylink [smargo] Buffers readed 0 bytes total time_us 75106
2017/06/09 13:03:36 6E8242D9 r (reader) skylink [smargo] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=534, cardmhz=369)
2017/06/09 13:03:37 6E8242D9 r (reader) skylink [smargo] card detected
2017/06/09 13:03:39 6E8242D9 r (reader) skylink [smargo] ATR: 3B 9F 11 40 60 49 52 44 45 54 4F 20 41 43 53 20 56 36 2E 30
2017/06/09 13:03:39 6E8242D9 r (reader) skylink [smargo] Init card protocol T0, FI=1, F=372, D=1, N=0
2017/06/09 13:03:39 6E8242D9 r (reader) skylink [smargo] Calculated work ETU is 69.66 us reader mhz = 534
2017/06/09 13:03:39 00000000 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r11384 (i686-linux-gnu)
2017/06/09 13:03:39 6E8242D9 r (reader) skylink [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)
2017/06/09 13:03:40 6E8242D9 r (reader) skylink [smargo] Hist. Bytes: IRDETO ACS V6.0
2017/06/09 13:03:40 6E8242D9 r (reader) skylink [smargo] detect irdeto card
2017/06/09 13:03:40 6E8242D9 r (reader) skylink [smargo] caid: 0624, acs: 0.06, country code: CZE
2017/06/09 13:03:41 6E8242D9 r (reader) skylink [smargo] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2017/06/09 13:03:41 6E8242D9 r (reader) skylink [smargo] WARNING: For Irdeto cards you will have to set 'cardmhz= 600' in oscam.server
2017/06/09 13:03:42 6E8242D9 r (reader) skylink [smargo] active providers: 4 (0440ea,ffffff,ffffff,ffffff)
2017/06/09 13:03:42 6E8242D9 r (reader) skylink [smargo] found card system irdeto
2017/06/09 13:03:42 6E8242D9 r (reader) skylink [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2017/06/09 13:03:42 6E8242D9 r (reader) skylink [irdeto] entitlements for provider: 1, id: 0440EA
2017/06/09 13:03:42 6E8242D9 r (reader) skylink [irdeto] chid: 1392, date: 2013/03/27 - 2013/04/15
2017/06/09 13:03:42 6E8242D9 r (reader) skylink [irdeto] chid: 1389, date: 2013/04/04 - 2013/04/23
2017/06/09 13:03:42 6E8242D9 r (reader) skylink [irdeto] chid: 7FFE, date: 2017/06/06 - 2017/07/06
2017/06/09 13:03:42 6E8242D9 r (reader) skylink [irdeto] chid: 7FFD, date: 2017/06/06 - 2017/06/16
2017/06/09 13:03:42 6E8242D9 r (reader) skylink [irdeto] chid: 7FFC, date: 2017/06/06 - 2017/07/06
2017/06/09 13:03:42 6E8242D9 r (reader) skylink [irdeto] chid: FFD8, date: 2017/06/06 - 2017/07/06
2017/06/09 13:03:42 6E8242D9 r (reader) skylink [irdeto] chid: FFB0, date: 2017/06/06 - 2017/07/06
2017/06/09 13:03:42 6E8242D9 r (reader) skylink [irdeto] chid: FFE0, date: 2017/06/06 - 2017/07/06
2017/06/09 13:03:42 6E8242D9 r (reader) skylink [irdeto] chid: 03E9, date: 2017/06/06 - 2017/07/06
2017/06/09 13:03:42 6E8242D9 r (reader) skylink [irdeto] chid: 03EB, date: 2017/06/06 - 2017/07/06
2017/06/09 13:03:42 6E8242D9 r (reader) skylink [irdeto] chid: 1771, date: 2017/06/06 - 2017/07/06
2017/06/09 13:03:42 6E8242D9 r (reader) skylink [irdeto] chid: 03EA, date: 2017/06/06 - 2017/07/06
2017/06/09 13:03:42 6E8242D9 r (reader) skylink [irdeto] chid: 03EC, date: 2017/06/06 - 2017/07/06
2017/06/09 13:03:42 6E8242D9 r (reader) skylink [irdeto] chid: 03ED, date: 2017/06/06 - 2017/07/06
2017/06/09 13:03:42 6E8242D9 r (reader) skylink [irdeto] chid: 07DB, date: 2017/06/06 - 2017/07/06
2017/06/09 13:03:42 6E8242D9 r (reader) skylink [irdeto] chid: 07D1, date: 2017/06/06 - 2017/07/06
2017/06/09 13:03:42 6E8242D9 r (reader) skylink [irdeto] chid: 07D2, date: 2017/06/06 - 2017/07/06
2017/06/09 13:03:42 6E8242D9 r (reader) skylink [irdeto] chid: 07D3, date: 2017/06/06 - 2017/07/06
2017/06/09 13:03:42 6E8242D9 r (reader) skylink [irdeto] chid: 07D4, date: 2017/06/06 - 2017/07/06
2017/06/09 13:03:42 6E8242D9 r (reader) skylink [irdeto] chid: 0BB9, date: 2017/06/06 - 2017/07/06
2017/06/09 13:03:42 6E8242D9 r (reader) skylink [irdeto] chid: 0BBC, date: 2017/06/06 - 2017/07/06
2017/06/09 13:03:42 6E8242D9 r (reader) skylink [irdeto] chid: 0BBA, date: 2017/06/06 - 2017/07/06
2017/06/09 13:03:43 6E8242D9 r (reader) skylink [irdeto] ready for requests
2017/06/09 13:03:43 00000000 s (main) init for all local cards done
2017/06/09 13:03:43 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2017/06/09 13:03:43 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2017/06/09 13:03:43 00000000 s (anticasc) anti cascading disabled
2017/06/09 13:03:43 04D2A56A c (client) plain dvbapi-client granted (dvbapi, au=auto (1 reader))
2017/06/09 13:03:43 04D2A56A c (dvbapi) dvbapi channelcache loaded from /usr/local/etc/oscam.ccache
2017/06/09 13:03:43 04D2A56A c (dvbapi) ERROR: Could not detect DVBAPI version.
2017/06/09 13:03:43 311F5E75 c (client) encrypted cccam-client 192.168.201.13 granted (oscamOV, au=auto (1 reader))

[marecek29]

Dokud neprojde zapis tak nebude dekodovat.

[AlfredoJ]

a problém může být v čem??? moc tomu nerozumím, doma mám 2x ipbox s oscam a tam mi to běží, vůbec nevím kde co hledat...

[petersk]

Problém je na klientoch.
Ako máš user na serveri nastavený? Máš otvorený pre cccam a newcamd porty? Ako máš u klienta nastavené?

[AlfredoJ]

klient se připojí, to je OK ale prostě to nedekoduje. Konfiguraky mám z ipboxu kde mi to vše jede. udělal jsem to stejně ale neběží to...

zde je log

2017/06/10 09:50:11 1F558542 c (ecm) apartman (0624@000000/0000/1F41/64:6EFBC035A7B285B1FF4D410E46F5FFCE): rejected group (0 ms) - CT 1 HD (no matching reader)
2017/06/10 09:50:21 1F558542 c (-) -- Skipped 1 duplicated log lines --
2017/06/10 09:50:21 1F558542 c (ecm) apartman (0624@000000/0000/1F41/64:DA9BFC734A3240341638BCD3A19BFB3A): rejected group (0 ms) - CT 1 HD (no matching reader)
2017/06/10 09:50:31 31F40C14 r (-) -- Skipped 1 duplicated log lines --
2017/06/10 09:50:31 31F40C14 r (reader) skylink [irdeto] Maybe you don't have the entitlements for this channel
2017/06/10 09:50:31 1F558542 c (ecm) apartman (0624@000000/0000/1F41/64:4F2B85AEB088BEB234B436C0C881FBB1): not found (144 ms) by skylink - CT 1 HD
2017/06/10 09:50:31 1F558542 c (ecm) apartman (0624@000000/0000/1F41/64:4F2B85AEB088BEB234B436C0C881FBB1): not found (1 ms) by skylink - CT 1 HD
2017/06/10 09:50:41 1F558542 c (ecm) apartman (0624@000000/0000/1F41/64:DA60701A0161EAF7B7BAC233303B151F): rejected group (0 ms) - CT 1 HD (no matching reader)
2017/06/10 09:50:51 1F558542 c (-) -- Skipped 1 duplicated log lines --
2017/06/10 09:50:51 1F558542 c (ecm) apartman (0624@000000/0000/1F41/64:23D69C096C92DD4DA1E7A122DD569964): rejected group (0 ms) - CT 1 HD (no matching reader)
2017/06/10 09:51:01 1F558542 c (-) -- Skipped 1 duplicated log lines --
2017/06/10 09:51:01 1F558542 c (ecm) apartman (0624@000000/0000/1F41/64:98685C6A526C6970030C213B41B6933E): rejected group (0 ms) - CT 1 HD (no matching reader)
2017/06/10 09:51:11 1F558542 c (-) -- Skipped 1 duplicated log lines --
2017/06/10 09:51:11 1F558542 c (ecm) apartman (0624@000000/0000/1F41/64:44572F9475888E614F96C946CF89F9A9): rejected group (0 ms) - CT 1 HD (no matching reader)
2017/06/10 09:51:21 1F558542 c (-) -- Skipped 1 duplicated log lines --
2017/06/10 09:51:21 1F558542 c (ecm) apartman (0624@000000/0000/1F41/64:965D5B1ABC65F948068B8ABCEECC906B): rejected group (1 ms) - CT 1 HD (no matching reader)
2017/06/10 09:51:21 1F558542 c (ecm) apartman (0624@000000/0000/1F41/64:965D5B1ABC65F948068B8ABCEECC906B): rejected group (0 ms) - CT 1 HD (no matching reader)
2017/06/10 09:51:31 1F558542 c (ecm) apartman (0624@000000/0000/1F41/64:863DF7D3E6E1E423182C644945DEA017): rejected group (0 ms) - CT 1 HD (no matching reader)

[matov]

Aby ti to slapalo chlape, musi to u readera namiesto toho on vyrerať takto

[AlfredoJ]

mám ještě OScam na PC a tam to jede OK ale nemám tam žádnou čtečku, jede to jen jako server a čte ze dvou ipboxu, tam taky není ACTIVE, je tam jen ON a jede to (viz priloha)

Když si na Ubuntu udělám čtečku, co mi čte z ipboxu, tak klient pak jede OK, dekoduje vše jak má...
Takže je si špatně nastavena ta čtečka... je to SmartReader2 plus, tak odhaduji, že je špatně nastavena