Tutorial Oscam na Asus RT N16 fw tomato 1.28 by Shibby

[sathyenas]

Zdravim.
Jede na tomto tomatu shibby karta sky…link ICE v irdeto modu CAD 0624 v
force_irdeto = 1?
Bohužel na asus merlin + optvare jsem neuspel kata nenabehne.

V asusu vl500gp fici jako z praku 2 roky pod olegem kornel 2.6:
Ctecka z aukra za 80 kc, prevodnik pl2303
Jelikoz nastal cas chci to predelat na Nkovej router.
Asus rtn66u.
http://www.ab-forum.info/viewtopic.php?f=168&t=57920

Diky za rady.

Log z oscam asus wl500gp

1970/01/01 01:01:25 5E2500 r reader0 [mouse] card detected
1970/01/01 01:01:26 5E2500 r reader0 [mouse] ATR: #cenzored #
1970/01/01 01:01:27 5E2500 r reader0 [mouse] Init card protocol T0, FI=1, F=372, D=2, N=0
1970/01/01 01:01:27 5E2500 r reader0 [mouse] Setting baudrate to 19200 bps
1970/01/01 01:01:27 5E2500 r reader0 [mouse] Calculated work ETU is 52.10 us
1970/01/01 01:01:27 5E2500 r reader0 [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
1970/01/01 01:01:28 5E2500 r reader0 [mouse] Hist. Bytes: TÄ
1970/01/01 01:01:28 5E2500 r reader0 [mouse] detect irdeto card
1970/01/01 01:01:29 5E2500 r reader0 [mouse] card detected
1970/01/01 01:01:29 5E2500 r reader0 [mouse] type: CryptoWorks
1970/01/01 01:01:31 5E2500 r reader0 [mouse] card system not supported
1970/01/01 01:01:31 5E2500 r reader0 [mouse] Normal mode failed, reverting to Deprecated Mode
1970/01/01 01:01:32 5E2500 r reader0 [mouse] ATR: #cenzored # 5E2500 r reader0 [mouse] Init card protocol T0, FI=1, F=372, D=2, N=0
1970/01/01 01:01:32 5E2500 r reader0 [mouse] Calculated work ETU is 104.20 us
1970/01/01 01:01:32 5E2500 r reader0 [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
1970/01/01 01:01:33 5E2500 r reader0 [mouse] Hist. Bytes: TÄ
1970/01/01 01:01:33 5E2500 r reader0 [mouse] detect irdeto card
1970/01/01 01:01:33 5E2500 r reader0 [mouse] caid: 0624, acs: 0.06, country code: CZE
1970/01/01 01:01:33 5E2500 r reader0 [mouse] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
1970/01/01 01:01:33 5E2500 r reader0 [mouse] WARNING: For Irdeto cards you will have to set 'cardmhz = 600' in oscam.server
1970/01/01 01:01:34 5E2500 r reader0 [mouse] active providers: 4 (09c8ff,ffffff,ffffff,ffffff)
1970/01/01 01:01:34 5E2500 r reader0 [mouse] found card system irdeto
1970/01/01 01:01:34 5E2500 r reader0 [irdeto] entitlements for provider: 1, id: 09C8FF
1970/01/01 01:01:34 5E2500 r reader0 [irdeto] chid: 1389, date: 2010/11/06 - 2011/07/18
1970/01/01 01:01:34 5E2500 r reader0 [irdeto] chid: 138A, date: 2010/11/06 - 2011/07/18
1970/01/01 01:01:34 5E2500 r reader0 [irdeto] chid: 138B, date: 2010/11/06 - 2011/07/18
1970/01/01 01:01:34 5E2500 r reader0 [irdeto] chid: 1771, date: 2016/03/23 - 2016/04/22
1970/01/01 01:01:34 5E2500 r reader0 [irdeto] chid: FFD8, date: 2016/03/23 - 2016/04/22
1970/01/01 01:01:34 5E2500 r reader0 [irdeto] chid: 7FFD, date: 2016/03/23 - 2016/04/02
1970/01/01 01:01:34 5E2500 r reader0 [irdeto] chid: 7FFE, date: 2016/03/23 - 2016/04/22
1970/01/01 01:01:34 5E2500 r reader0 [irdeto] chid: FFE0, date: 2016/03/23 - 2016/04/22
1970/01/01 01:01:34 5E2500 r reader0 [irdeto] chid: 7FFC, date: 2016/03/23 - 2016/04/22
1970/01/01 01:01:34 5E2500 r reader0 [irdeto] chid: FFB0, date: 2016/03/23 - 2016/04/22
1970/01/01 01:01:34 5E2500 r reader0 [irdeto] chid: 03E9, date: 2016/03/23 - 2016/04/22
1970/01/01 01:01:34 5E2500 r reader0 [irdeto] chid: 03EA, date: 2016/03/23 - 2016/04/22
1970/01/01 01:01:34 5E2500 r reader0 [irdeto] chid: 03EB, date: 2016/03/23 - 2016/04/22
1970/01/01 01:01:34 5E2500 r reader0 [irdeto] chid: 03EC, date: 2016/03/23 - 2016/04/22
1970/01/01 01:01:34 5E2500 r reader0 [irdeto] chid: 03ED, date: 2016/03/23 - 2016/04/22

[dufoq3]

zacal by som tymto:
1970/01/01 01:01:33 5E2500 r reader0 [mouse] WARNING: For Irdeto cards you will have to set 'cardmhz = 600' in oscam.server

[sathyenas]

zacal by som tymto:
1970/01/01 01:01:33 5E2500 r reader0 [mouse] WARNING: For Irdeto cards you will have to set 'cardmhz = 600' in oscam.server

promin asi jesem se vevyjadril presne to je log z asusu wl500gp pod olegem kde me to jede 2 roky, frekvenci neres jede to
vidis z logu ze jede zapisy, atr atd.
ale log pod optvare na asusu trn66u je tento:

2016/03/24 10:50:55 5E12C8 r reader0 [mouse] Reader initialized (device=/dev/ttyS0, detect=none, mhz=357, cardmhz=354)
2016/03/24 10:50:56 5E12C8 r reader0 [mouse] card detected
2016/03/24 10:51:00 5E12C8 r reader0 [mouse] Error activating card.
2016/03/24 10:51:08 0 --- Skipped 2 duplicated log lines ---
2016/03/24 10:51:08 5E12C8 r reader0 [mouse] card initializing error
2016/03/24 10:51:09 0 s init for all local cards done

[dufoq3]

tak potom nechapem preco si sem daval log z wl500gp, ked to funguje...
0624 som v tomato neskusal - cize dalej ti nepomozem.

EDIT: este ma napadlo, mas tam pridany RSA key v configu?

[sathyenas]

Diky za snahu a rychlou odpoved.
Takze znovu abych to upresnil.
pod olegem na wl500gp na jadru 2.6 oscam dolehaj, pod irdeto na ice bezi stabilne.
Na ctecce od ZDK + progratoru aji na pl usb z aukra .
na asusu rtn66u merlin + opvare, nebo ng,+ oscam dolehaj ten sami build pro mipsel wl500gp jsem cad 0624 nezprovoznil.
Ptam se jede na tomatu shibby nekomu cad 0624?
Je to spatnym kernelem pro tento routr nabo mezy pocitacem a zidli?
Nesomruju protoze jsem toho procet dost-
Diky za info.

[11chloe]

Pokud by si opravdu hledal, tak tady na fóru vše najdeš. Zkusil bych třeba kombinaci tomato + entware a máš k tomu i přímo aktuální oscam. Podobně i optware má dostatečnou podporu.
Zbytek je o konfiguraci a čtení logu oscamu.
http://www.ab-forum.info/viewtopic.php?p=642561#p642561
http://www.ab-forum.info/viewtopic.php? ... ntware#p61

[pikejcz]

pro sathyenas

kdyz kouknu na tvuj log:
2016/03/24 10:50:55 5E12C8 r reader0 [mouse] Reader initialized (device=/dev/ttyS0, detect=none, mhz=357, cardmhz=354)
2016/03/24 10:50:56 5E12C8 r reader0 [mouse] card detected
2016/03/24 10:51:00 5E12C8 r reader0 [mouse] Error activating card.
2016/03/24 10:51:08 0 --- Skipped 2 duplicated log lines ---
2016/03/24 10:51:08 5E12C8 r reader0 [mouse] card initializing error

tak mne napada:

1. ctecka karet je skutecne zarizeni /dev/ttyS0 ?
2. cardmhz=354 mi pripada divne:
=> nemas nahodou v oscam.server nastaveno autospeed = 1 ?
nektere oscamy/ctecky vyzaduji : autospeed = 0 a mhz a cardmhz nastavit rucne
a nekdy i detect = cd

Petr

[sathyenas]

pro sathyenas

kdyz kouknu na tvuj log:
2016/03/24 10:50:55 5E12C8 r reader0 [mouse] Reader initialized (device=/dev/ttyS0, detect=none, mhz=357, cardmhz=354)
2016/03/24 10:50:56 5E12C8 r reader0 [mouse] card detected
2016/03/24 10:51:00 5E12C8 r reader0 [mouse] Error activating card.
2016/03/24 10:51:08 0 --- Skipped 2 duplicated log lines ---
2016/03/24 10:51:08 5E12C8 r reader0 [mouse] card initializing error

tak mne napada:

1. ctecka karet je skutecne zarizeni /dev/ttyS0 ?
2. cardmhz=354 mi pripada divne:
=> nemas nahodou v oscam.server nastaveno autospeed = 1 ?
nektere oscamy/ctecky vyzaduji : autospeed = 0 a mhz a cardmhz nastavit rucne
a nekdy i detect = cd

Petr

Zdravim.
Dik za snahu.
ctedky mam v oscamu zadefinovany takto /dev/ttyS0
stim ze me v logu oscamu mam toto:
usb-mouse [mouse] Reader initialized (device=/dev/ttyS1, detect=none, mhz=357, cardmhz=354)
2016/03/25 11:51:24 5E5380 r usb-mouse [mouse] Reader initialized (device=/dev/ttyS0, detect=none, mhz=357, cardmhz=354)
2016/03/25 11:51:25 5E5380 r usb-mouse [mouse] card detected

stim ze v logu asusu jsou pripojeny jako:
Mar 25 19:00:09 kernel: option 1-1.2:1.0: GSM modem (1-port) converter detected
Mar 25 19:00:09 kernel: usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB0
Mar 25 19:00:09 kernel: option 1-1.2:1.1: GSM modem (1-port) converter detected
Mar 25 19:00:09 kernel: usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB1

kdyz zmenim v oscamu ctecky tak jak jsou v logu asusu na ttyUSB0 a ttyUSB1
tak me proste ani nenabehne v oscam card detected atd.
je to hold sama past ani to ocko nenasadis.

[pikejcz]

pro sathyenas

Ja si prece nemuzu vybirat zarizeni tak, jak se mi to hodi:
nefunguje mi to s /dev/ttyUSB0 tak pouziju /dev/ttyS1 ???
MUSIM VEDET, ktere zarizeni mam pouzit.

napr.
Jestlize ctecka pouziva prevodnik pl2303, tak musi byt pred startem oscamu zavedeny
odpovidajici moduly jadra usbserial.ko a pl2303.ko pomoci prikazu (napr.):

insmod usbserial.ko
insmod pl2303.ko

- ze jsou zavedeny si skontroluju prikazem: lsmod

... musim najit radky s pl2303 a usbserial - napr.

Module Size Used by Tainted: P
.
.
pl2303 36496 2
.
.
usbserial 25552 5 pl2303
.
.

- pomoci prikazu dmesg zjistim informace o prideleni zarizeni ttyUSB0, ttyUSB1,..

- pokud v logu vidim:
Mar 25 19:00:09 kernel: option 1-1.2:1.0: GSM modem (1-port) converter detected
Mar 25 19:00:09 kernel: usb 1-1.2: GSM modem (1-port) converter now attached to ttyUSB0

tak to vypada, ze mas MOZNA v menu aktivovanou podporu 3G modemu ?
coz by mohlo zpusobovat kolizi - zavedou se jine moduly jadra = moduly pro 3G modem misto
pro ctecku karet ?

- az budou zavedene spravne moduly jadra a v konfiguraci oscamu pouzijes odpovidajici zarizeni /dev/ttyUSB0 (ttyUSB1)
a bude pretrvavat problem s detekci karty muzes pak pokracovat bodem

2. cardmhz=354 mi pripada divne:
=> nemas nahodou v oscam.server nastaveno autospeed = 1 ?
nektere oscamy/ctecky vyzaduji : autospeed = 0 a mhz a cardmhz nastavit rucne
a nekdy i nastavit detect = cd

Petr

[Duce]

prikladám odskúšanú binárku od dolehaja

[klinec2]

prikladám odskúšanú binárku od dolehaja

Nenajde sa dáky oscam preklopený z ice na irdeto ?

[Steiner]

Z ice na irdeto sa nepreklápa Oscam ale jeho nastavenie. Ide to v každom Oscame.

[VTronik]

prikladám odskúšanú binárku od dolehaja

Nenajde sa dáky oscam preklopený z ice na irdeto ?

ZDE máš celé vlákno, které se tím zabývá.

[klinec2]

Skúšal som ale stale sa my nedarý,stale my vypisuje:

2020/05/26 12:58:54 1240 r02 ATR: CE FC C0 3C 0C 0F 00 00 B0 F3 18 0E E0 00 7E FC 83 80 EC
2020/05/26 12:58:54 1240 r02 ERROR: Could not read reader->convention
2020/05/26 12:58:54 1240 r02 Error activating card.
2020/05/26 12:58:54 1240 r02 card initializing error
2020/05/26 12:58:54 1236 s init for all local cards done
2020/05/26 12:58:54 1236 s anti cascading disabled
2020/05/26 12:58:54 1236 s dvbapi: dvbapi disabled
2020/05/26 12:58:54 1236 s client(1) connect from 192.168.1.98 (pid=1251, pipfd=17)
2020/05/26 12:58:54 1251 c01 encrypted cs378x-client 192.168.1.98 granted (ObyIzba, au=0)
2020/05/26 12:58:54 1251 c01 ObyIzba (0D96&000004/3731/80:5732): rejected group (1 ms)

Chcel som vymeniť oscam ale nedá sa zmeniť atribut na 755 cez totalcomander ....neviete my poradit akym prikazom sa to da cez putty ?
lebo tam je starý oscam 0.99.4svn /3144

a configi mam takto

[ctiforum]

1. Ja by som skúsil "chmod 755 subor"
2. boxkey = A1C6F3D8B5E1F2C1
3. reader máš v grupe 1 a usera v grupe 8. Preštuduj si dokumentáciu.

[klinec2]

1. Ja by som skúsil "chmod 755 subor"
2. boxkey = A1C6F3D8B5E1F2C1
3. reader máš v grupe 1 a usera v grupe 8. Preštuduj si dokumentáciu.

atribut mám na 755 len ,Oscam ktorý mám nemá oscam.dvbapi keď dám druhu binarku nedajú sa zmeniť na 755,preto potrebujem pomoc ako ich zmeniť
a raeder opravený

[ctiforum]

1. dvbapi v routeri nepotrebuješ, naštuduj si, na čo slúži DVBAPI/STAPI
2. skús namiesto TotalCMD použiť WINSCP

[kolemjdouci]

Zdar chlapi, poradite mi prosim, rozchodim na tomto routru nejakym zpusobem oscam?

[polomarko]

asi nie, podpora je iba u Asus RT-AC53U

https://openwrt.org/toh/views/toh_packagedownload
https://tomato.groov.pl/?page_id=164

[asconn]

Existuje pro tuto platformu ještě nějaký novější oscam?