ASUS WL 500 gp

rosssss · Příspěvek od **rosssss** » 22.březen 2011 - 20:02

alfsvk píše:Netusim kde mas problem, ide to aj inym, skusal si aspon WEB-om/oscam-newcs/ pozriet? Napada ma len posledna veta v prispevku pre 500GP v2 > konfiguracne subory si kazdy da svoje.
PS: pripadne treba clienta v SATe nastavit podla parametrov z configoch v balickoch.

newcs.xml-mam samozrejme svuj......
oscam nepouzivam,nainstalovan je pouze newcs....pres web se podivam do newcs, ale nejede mi pripojeni klient - server, sit je OK,dopinguju se na server.....

alfsvk · Příspěvek od **alfsvk** » 22.březen 2011 - 20:03

@ Andrej
A v DM500 mas preco 0?
[reader]
label = newcamd
enable = 0
Ja by som tam supol 1, ak to ma ist na ten ASUS..

Andrej · Příspěvek od **Andrej** » 22.březen 2011 - 20:08

alfsvk píše:@ Andrej
A v DM500 mas preco 0?
[reader]
label = newcamd
enable = 0
Ja by som tam supol 1, ak to ma ist na ten ASUS..

Ano tam mam samozrejme 1, ked som to sem daval mal som to pripojenie zrusene.

dkdkkd · Příspěvek od **dkdkkd** » 22.březen 2011 - 21:34

alfsvk píše:BTW; dd-wrt - WEB je PRUDKO NAVYKOVY, zostavam na nom.

Dyť to tady do vás tlačím od začátku

rsevcik · Příspěvek od **rsevcik** » 23.březen 2011 - 7:53

@alfsvk
Prosím tě a ten ddwrt jsi tam nahrával přes asus utilitu nebo tftp? A měl jsi při tom ten rt-n routr taky v tom servisním režimu kdy bliká napajení jak u 500ky nebo je to jinak?
Dík za info nerad bych ho nějak oživoval

u 500ky jsem použil poslední záchranu pin 9 asi 3krát.

No ale kdo nic nedělá nic nepokazí.

PeterKt · Příspěvek od **PeterKt** » 23.březen 2011 - 8:30

@dkdkkd:
Uz len dufat, ze ddwrt skompiluju pre 500-ku aj s jadrom 2.6. Dovtedy zostavam na Oleg.

alfsvk · Příspěvek od **alfsvk** » 23.březen 2011 - 8:57

Z originalu na Olega a potom na DD-WRT, obe cez resc. utilitu z CD pre 500GP.
Zbehlo bez problemov, len to trva o nieco dlhsie ako na 500 vke.

rosssss · Příspěvek od **rosssss** » 23.březen 2011 - 20:10

prikladam log z asus wl 500gp v2+usb2x phoenix smouse+WL500gpv2-1.9.2.7-rtn-r2775.trx+usb4gb/fat32

Kód: Vybrat vše

[admin@WL-485B39E7EB33 root]$ df
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/root                 4736      4736         0 100% /
devfs                    14504         0     14504   0% /dev
tmpfs                    14504       164     14340   1% /tmp
/dev/discs/disca/part1
                       3918336      4404   3913932   0% /tmp/mnt/disca_1
[admin@WL-485B39E7EB33 root]$

Kód: Vybrat vše

[admin@WL-485B39E7EB33 root]$ cd /tmp/mnt/disca_1/bin
[admin@WL-485B39E7EB33 bin]$ ./autostart
mkdir: can't create directory '/usr/local/sbin': File exists
tar: removing leading '/' from member names
tmp/local/
tmp/local/etc/
tmp/local/etc/dropbear/
tmp/local/etc/dropbear/dropbear_rsa_host_key.pub
tmp/local/etc/dropbear/dropbear_rsa_host_key
tmp/local/etc/dropbear/dropbear_dss_host_key.pub
tmp/local/etc/dropbear/dropbear_dss_host_key
tmp/local/sbin/
tmp/local/sbin/post-mount
tmp/local/root/
-rw-r--r--    1 admin    root          2022 Mar 23 19:56 /tmp/flash.tar.gz
Check saved image and type "/sbin/flashfs commit" to commit changes
.
Committed.
======================================
  Automatic start of newcs installed
======================================

Kód: Vybrat vše

[admin@WL-485B39E7EB33 root]$ ps
  PID USER       VSZ STAT COMMAND
    1 admin     1580 S    /sbin/init
    2 admin        0 SW<  [kthreadd]
    3 admin        0 SW<  [ksoftirqd/0]
    4 admin        0 SW<  [events/0]
    5 admin        0 SW<  [khelper]
   24 admin        0 SW<  [kblockd/0]
   46 admin        0 SW   [pdflush]
   47 admin        0 SW   [pdflush]
   48 admin        0 SW<  [kswapd0]
   49 admin        0 SW<  [aio/0]
   98 admin        0 SW<  [mtdblockd]
  186 admin     1604 S    syslogd -m 0 -O /tmp/syslog.log -S -D -l 7 -b 1
  189 admin     1604 S    klogd
  192 admin     1132 S    nas
  196 admin     1608 R    telnetd
  200 admin     1220 S    dropbear -4
  203 admin     1204 S    httpd vlan1
  208 nobody     940 S    dnsmasq
  219 admin        0 SW<  [khubd]
  240 admin     1068 S    lld2d br0 eth1
  277 admin      744 S    p9100d -f /dev/lp0 0
  316 admin        0 SW<  [scsi_eh_0]
  317 admin        0 SW<  [usb-storage]
  367 admin     1616 S    /sbin/udhcpc -i vlan1 -p /var/run/udhcpc0.pid -b -O
  368 admin     1600 S    watchdog
  382 admin     1036 S    /usr/sbin/vsftpd
  408 admin     9996 S    /tmp/mnt/disca_1/bin/./newcs -C /tmp/mnt/disca_1/bin
  409 admin     9996 S    /tmp/mnt/disca_1/bin/./newcs -C /tmp/mnt/disca_1/bin
  410 admin     9996 S    /tmp/mnt/disca_1/bin/./newcs -C /tmp/mnt/disca_1/bin
  411 admin     9996 S    /tmp/mnt/disca_1/bin/./newcs -C /tmp/mnt/disca_1/bin
  412 admin     9996 S    /tmp/mnt/disca_1/bin/./newcs -C /tmp/mnt/disca_1/bin
  413 admin     9996 S    /tmp/mnt/disca_1/bin/./newcs -C /tmp/mnt/disca_1/bin
  414 admin     9996 S    /tmp/mnt/disca_1/bin/./newcs -C /tmp/mnt/disca_1/bin
  415 admin     1612 S    -sh
  417 admin     1608 R    ps

Kód: Vybrat vše

Jan  1 01:00:02 kernel: Setting the PFC to its default value
Jan  1 01:00:02 kernel: Determined physical RAM map:
Jan  1 01:00:02 kernel:  memory: 02000000 @ 00000000 (usable)
Jan  1 01:00:03 dropbear[200]: Running in background
Jan  1 01:00:03 dnsmasq[208]: started, version 2.57 cachesize 512
Jan  1 01:00:03 dnsmasq[208]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-I18N DHCP no-scripts no-TFTP no-IDN
Jan  1 01:00:03 dnsmasq-dhcp[208]: DHCP, IP range 192.168.2.2 -- 192.168.2.200, lease time 1d
Jan  1 01:00:03 dnsmasq[208]: read /etc/hosts - 2 addresses
Jan  1 01:00:04 kernel: usbcore: registered new interface driver usbfs
Jan  1 01:00:04 kernel: usbcore: registered new interface driver hub
Jan  1 01:00:04 kernel: usbcore: registered new device driver usb
Jan  1 01:00:04 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan  1 01:00:04 kernel: ehci_hcd 0000:00:03.1: EHCI Host Controller
Jan  1 01:00:04 kernel: ehci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 1
Jan  1 01:00:04 kernel: ehci_hcd 0000:00:03.1: irq 6, io mem 0x18003800
Jan  1 01:00:04 kernel: ehci_hcd 0000:00:03.1: USB 0.0 started, EHCI 1.00
Jan  1 01:00:04 kernel: usb usb1: configuration #1 chosen from 1 choice
Jan  1 01:00:04 kernel: hub 1-0:1.0: USB hub found
Jan  1 01:00:04 kernel: hub 1-0:1.0: 2 ports detected
Jan  1 01:00:05 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Jan  1 01:00:05 kernel: ohci_hcd 0000:00:03.0: OHCI Host Controller
Jan  1 01:00:05 kernel: ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
Jan  1 01:00:05 kernel: ohci_hcd 0000:00:03.0: irq 6, io mem 0x18003000
Jan  1 01:00:05 kernel: usb 1-1: new high speed USB device using ehci_hcd and address 2
Jan  1 01:00:05 kernel: usb usb2: configuration #1 chosen from 1 choice
Jan  1 01:00:05 kernel: hub 2-0:1.0: USB hub found
Jan  1 01:00:05 kernel: hub 2-0:1.0: 2 ports detected
Jan  1 01:00:05 kernel: usb 1-1: configuration #1 chosen from 1 choice
Jan  1 01:00:05 kernel: hub 1-1:1.0: USB hub found
Jan  1 01:00:05 kernel: hub 1-1:1.0: 2 ports detected
Jan  1 01:00:05 kernel: usb 1-1.1: new high speed USB device using ehci_hcd and address 3
Jan  1 01:00:05 kernel: usb 1-1.1: configuration #1 chosen from 1 choice
Jan  1 01:00:05 kernel: usb 1-1.2: new full speed USB device using ehci_hcd and address 4
Jan  1 01:00:05 kernel: usb 1-1.2: configuration #1 chosen from 1 choice
Jan  1 01:00:06 kernel: usbcore: registered new interface driver usblp
Jan  1 01:00:06 kernel: Linux video capture interface: v2.00
Jan  1 01:00:06 kernel: usbcore: registered new interface driver usbserial
Jan  1 01:00:06 kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
Jan  1 01:00:06 kernel: usbcore: registered new interface driver usbserial_generic
Jan  1 01:00:06 kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core
Jan  1 01:00:07 kernel: usbcore: registered new interface driver uvcvideo
Jan  1 01:00:07 kernel: USB Video Class driver (v0.1.0)
Jan  1 01:00:07 kernel: SCSI subsystem initialized
Jan  1 01:00:07 kernel: Initializing USB Mass Storage driver...
Jan  1 01:00:07 kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan  1 01:00:07 kernel: usbcore: registered new interface driver usb-storage
Jan  1 01:00:07 kernel: USB Mass Storage support registered.
Jan  1 01:00:08 kernel: NTFS driver 2.1.28 [Flags: R/O MODULE].
Jan  1 01:00:08 kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port)
Jan  1 01:00:08 kernel: usbcore: registered new interface driver option
Jan  1 01:00:08 kernel: drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.2
Jan  1 01:00:08 kernel: usbcore: registered new interface driver cdc_acm
Jan  1 01:00:08 kernel: drivers/usb/class/cdc-acm.c: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
Jan  1 01:00:09 dnsmasq[208]: read /etc/hosts - 2 addresses
Jan  1 01:00:09 dhcp client: deconfig: lease is lost
Jan  1 01:00:09 kernel: scsi 0:0:0:0: Direct-Access     USBDisk  RunDisk          1.00 PQ: 0 ANSI: 2
Jan  1 01:00:09 kernel: sd 0:0:0:0: [sda] 7852032 512-byte hardware sectors (4020 MB)
Jan  1 01:00:09 kernel: sd 0:0:0:0: [sda] Write Protect is off
Jan  1 01:00:09 kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
Jan  1 01:00:09 kernel:  sda: sda1
Jan  1 01:00:10 kernel: sd 0:0:0:0: [sda] Attached SCSI removable disk
Jan  1 01:00:10 dnsmasq[208]: read /etc/hosts - 2 addresses
Jan  1 01:00:10 dnsmasq[208]: using nameserver 192.168.1.1#53
Jan  1 01:00:10 dnsmasq[208]: using nameserver 192.168.5.1#53
Jan  1 01:00:10 dhcp client: bound IP : 192.168.1.21 from 192.168.1.1
Mar 23 19:48:24 ntp client: Synchronizing time with time.nist.gov...
Mar 23 19:48:24 kernel: FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Mar 23 19:48:24 USB storage: vfat fs at /dev/discs/disca/part1 mounted to /tmp/mnt/disca_1
Mar 23 19:48:25 kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device
Mar 23 19:48:25 kernel: ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
Mar 23 19:48:25 kernel: drivers/usb/serial/ftdi_sio.c: Detected FT2232C
Mar 23 19:48:25 kernel: usb 1-1.2: Number of endpoints 2
Mar 23 19:48:25 kernel: usb 1-1.2: Endpoint 1 MaxPacketSize 64
Mar 23 19:48:25 kernel: usb 1-1.2: Endpoint 2 MaxPacketSize 64
Mar 23 19:48:25 kernel: usb 1-1.2: Setting MaxPacketSize 64
Mar 23 19:48:25 kernel: usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
Mar 23 19:48:25 kernel: ftdi_sio 1-1.2:1.1: FTDI USB Serial Device converter detected
Mar 23 19:48:25 kernel: drivers/usb/serial/ftdi_sio.c: Detected FT2232C
Mar 23 19:48:25 kernel: usb 1-1.2: Number of endpoints 2
Mar 23 19:48:25 kernel: usb 1-1.2: Endpoint 1 MaxPacketSize 64
Mar 23 19:48:25 kernel: usb 1-1.2: Endpoint 2 MaxPacketSize 64
Mar 23 19:48:25 kernel: usb 1-1.2: Setting MaxPacketSize 64
Mar 23 19:48:26 kernel: usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB1
Mar 23 19:48:26 kernel: usbcore: registered new interface driver ftdi_sio
Mar 23 19:48:26 kernel: drivers/usb/serial/ftdi_sio.c: v1.5.0:USB FTDI Serial Converters Driver

Kód: Vybrat vše

<newCSconfig>
	<readers name="Card Readers">
		  <device>
			<name>phoenix0</name>
			<type>phoenix</type>
			<node>/dev/usb/tty0</node>
			<mhz>358</mhz> <!--  or 357 -->
			<parity>even</parity>
			<reset>inverse</reset>
			<export>yes</export>
			<enabled>yes</enabled>
			<blocksa>yes</blocksa>
			<blockua>yes</blockua>
			<blockga>yes</blockga>
			<PTShandshake>no</PTShandshake> 
			<carddetect>no</carddetect>
			<newcamd_port>10001</newcamd_port>
			<Seca-PPV>no</Seca-PPV>
			<pincode>0000</pincode>
			<priority>round</priority> <!--  hard is default -->
			<sid>
			<allow>
			<id></id>
			</allow>
			<deny>
			<id></id>
			</deny>
			</sid>
                 </device>
			
	          <device>
			<name>phoenix1</name>
			<type>phoenix</type>
			<node>/dev/usb/tty1</node>
			<mhz>358</mhz> <!--  or 357 -->
			<parity>even</parity>
			<reset>inverse</reset>
			<export>yes</export>
			<enabled>yes</enabled>
			<blocksa>yes</blocksa>
			<blockua>yes</blockua>
			<blockga>yes</blockga>
			<PTShandshake>no</PTShandshake>
			<carddetect>no</carddetect>
			<newcamd_port>10002</newcamd_port>
			<Seca-PPV>no</Seca-PPV>
			<pincode>0000</pincode>
			<priority>round</priority>
			<sid>
			<allow>
			<id></id>
			</allow>
			<deny>
			<id></id>
			</deny>
			</sid>
	          </device>
	       
	</readers>
	<radegastserver>
			<enabled>No</enabled>
			<port>10003</port>
			<allow>
				<hostname>localhost</hostname>
			</allow>
	</radegastserver>
	<cache>
			<emm>20</emm>
			<ecm>20</ecm>
	</cache>
        <httpd>
               <server>
			<port>23000</port>
			<enabled>yes</enabled>
		</server>
		<user>
		<name>newcs</name>
    		<password>newcs</password>
                <accesslevel>admin</accesslevel>
		</user>
	</httpd>
	<debug>
			<password></password>
			<level>normal</level>
			<type>init</type>
			<output>console,tcp</output>
			<console_options>normal,init</console_options>
			<tcp_port>1002</tcp_port>
			<tcp_options>normal,init</tcp_options>
	</debug>
	<newcamdserver>
			<enabled>Yes</enabled>
			<name>newcs</name>
			<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
      <user>
				<name>box1</name>
				<password>box1</password>
				<au>off</au>
        			</user>
      <user>
				<name>box2</name>
				<password>box2</password>
				<au>off</au>
        			</user>
      <user>
				<name>box3</name>
				<password>box3</password>
				<au>off</au>
        			</user>
      <user>
				<name>box4</name>
				<password>box4</password>
				<au>off</au>
        			</user>
      <user>
				<name>box5</name>
				<password>box5</password>
				<au>off</au>
        			</user>
    	</newcamdserver>
</newCSconfig>

nedari se mi pripojit se na server....

rsevcik · Příspěvek od **rsevcik** » 23.březen 2011 - 20:36

čau pokud vím tak cesta ke čtečce by měla být asi tak: /dev/ttyUSB0
a ty máš zápis tak to <node>/dev/usb/tty0</node>

rosssss · Příspěvek od **rosssss** » 23.březen 2011 - 20:39

uz jsem zkousel...
<node>/dev/usb/tty0</node>
<node>/dev/usb/tty/0</node>
<node>/dev/usb/tts0</node>
<node>/dev/usb/tts/0</node>

s nicim jsem se nepripojil....

asus vypisuje tohle
USB devfs Devices

Device : Location : Info
/dev/ttyUSB0 : 1.2.0 : Manufacturer="FTDI" : Product="Dual RS232"
/dev/ttyUSB1 : 1.2.11 : Manufacturer="FTDI" : Product="Dual RS232"

zkusim teda jeste podle nej

rsevcik · Příspěvek od **rsevcik** » 23.březen 2011 - 20:42

nemohu si pomoct ale toto co jsem psal tam nevidím, ale možná jsem přehlídl.
a co ti tu píši !!!!
<node>/dev/ttyUSB1</node>

alfsvk · Příspěvek od **alfsvk** » 23.březen 2011 - 20:45

USB citacky su def. takto:

OLEG k2.4:
<node>/dev/usb/tts/0</node>
OLEG k2.6
<node>/dev/ttyUSB0</node>
DD-WRT k2.6
<node>/dev/usb/tts/0</node>

rosssss · Příspěvek od **rosssss** » 23.březen 2011 - 21:05

ano mel jsem to spatne upravil jsem a restartoval....,prikladam vse znovu, nevim proc se nedetekuje druha karta (0d03), ve ctecce jsou 2 karty, uz jsem mezi sebou i prohodil,stale detekuje jen TNK kartu,dalsi nenacte
pak jsem jeste prilozil screeny kde to je videt
na dalsim screenu je skupina useru ale jen pro jednu ctecku

stale se nepripojim na server, pokud to mam spravne nastavene,adresa serveru je ip adresa brany routera,tam se dopinguju,ale pri prihlasovani vyskakuje chyba.....

Kód: Vybrat vše

Status Information

Linux version 2.6.22.19 (root@localhost) (gcc version 4.3.5 (GCC) ) #6 Sat Mar 12 14:58:22 MSK 2011
1.9.2.7-rtn-r2775

Wed Mar 23 20:46:41 CET 2011
 20:46:41 up 6 min, load average: 0.00, 0.03, 0.01


Interfaces

br0       Link encap:Ethernet  HWaddr 48:5B:39:E7:EB:33  
          inet addr:192.168.2.1  Bcast:192.168.2.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:653 errors:0 dropped:0 overruns:0 frame:0
          TX packets:676 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:61840 (60.3 KiB)  TX bytes:329875 (322.1 KiB)

eth0      Link encap:Ethernet  HWaddr 48:5B:39:E7:EB:33  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1007 errors:0 dropped:0 overruns:0 frame:0
          TX packets:901 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:285311 (278.6 KiB)  TX bytes:362030 (353.5 KiB)
          Interrupt:4 Base address:0x1000 

eth1      Link encap:Ethernet  HWaddr 48:5B:39:E7:EB:33  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:1
          TX packets:64 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:17801 (17.3 KiB)
          Interrupt:13 Base address:0x5000 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING MULTICAST  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

vlan0     Link encap:Ethernet  HWaddr 48:5B:39:E7:EB:33  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:660 errors:0 dropped:0 overruns:0 frame:0
          TX packets:676 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:64802 (63.2 KiB)  TX bytes:332579 (324.7 KiB)

vlan1     Link encap:Ethernet  HWaddr 48:5B:39:E7:EB:33  
          inet addr:192.168.1.21  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:347 errors:0 dropped:0 overruns:0 frame:0
          TX packets:225 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:202383 (197.6 KiB)  TX bytes:29451 (28.7 KiB)



Routing Table

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.1.1     0.0.0.0         255.255.255.255 UH    0      0        0 vlan1
192.168.2.0     0.0.0.0         255.255.255.0   U     0      0        0 br0
192.168.1.0     0.0.0.0         255.255.255.0   U     0      0        0 vlan1
127.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0 lo
0.0.0.0         192.168.1.1     0.0.0.0         UG    0      0        0 vlan1


ARP Table

IP address       HW type     Flags       HW address            Mask     Device
192.168.2.2      0x1         0x2         00:1C:23:B0:4D:0A     *        br0
192.168.2.112    0x1         0x2         00:80:0F:11:88:88     *        br0
192.168.1.1      0x1         0x2         00:22:B0:A9:D3:EA     *        vlan1


IP Tables

Chain INPUT (policy ACCEPT 1 packets, 244 bytes)
 pkts bytes target     prot opt in     out     source               destination         
    2    80 DROP       all  --  *      *       0.0.0.0/0            0.0.0.0/0           state INVALID 
  381 37358 ACCEPT     all  --  *      *       0.0.0.0/0            0.0.0.0/0           state RELATED,ESTABLISHED 
    0     0 ACCEPT     all  --  lo     *       0.0.0.0/0            0.0.0.0/0           state NEW 
  104  8549 ACCEPT     all  --  br0    *       0.0.0.0/0            0.0.0.0/0           state NEW 

Chain FORWARD (policy ACCEPT 17 packets, 884 bytes)
 pkts bytes target     prot opt in     out     source               destination         
    0     0 ACCEPT     all  --  br0    br0     0.0.0.0/0            0.0.0.0/0           
    5   200 DROP       all  --  *      *       0.0.0.0/0            0.0.0.0/0           state INVALID 
  360  209K ACCEPT     all  --  *      *       0.0.0.0/0            0.0.0.0/0           state RELATED,ESTABLISHED 
    0     0 DROP       all  --  !br0   vlan1   0.0.0.0/0            0.0.0.0/0           
    0     0 ACCEPT     all  --  *      *       0.0.0.0/0            0.0.0.0/0           ctstate DNAT 

Chain OUTPUT (policy ACCEPT 485 packets, 124K bytes)
 pkts bytes target     prot opt in     out     source               destination         

Chain BRUTE (0 references)
 pkts bytes target     prot opt in     out     source               destination         

Chain MACS (0 references)
 pkts bytes target     prot opt in     out     source               destination         

Chain SECURITY (0 references)
 pkts bytes target     prot opt in     out     source               destination         
    0     0 RETURN     tcp  --  *      *       0.0.0.0/0            0.0.0.0/0           tcp flags:0x17/0x02 limit: avg 1/sec burst 5 
    0     0 RETURN     tcp  --  *      *       0.0.0.0/0            0.0.0.0/0           tcp flags:0x17/0x04 limit: avg 1/sec burst 5 
    0     0 RETURN     udp  --  *      *       0.0.0.0/0            0.0.0.0/0           limit: avg 5/sec burst 5 
    0     0 RETURN     icmp --  *      *       0.0.0.0/0            0.0.0.0/0           limit: avg 5/sec burst 5 
    0     0 DROP       all  --  *      *       0.0.0.0/0            0.0.0.0/0           

Chain logaccept (0 references)
 pkts bytes target     prot opt in     out     source               destination         
    0     0 LOG        all  --  *      *       0.0.0.0/0            0.0.0.0/0           state NEW LOG flags 39 level 4 prefix `ACCEPT ' 
    0     0 ACCEPT     all  --  *      *       0.0.0.0/0            0.0.0.0/0           

Chain logdrop (0 references)
 pkts bytes target     prot opt in     out     source               destination         
    0     0 LOG        all  --  *      *       0.0.0.0/0            0.0.0.0/0           state NEW LOG flags 39 level 4 prefix `DROP ' 
    0     0 DROP       all  --  *      *       0.0.0.0/0            0.0.0.0/0           


IP Tables NAT

Chain PREROUTING (policy ACCEPT 113 packets, 6170 bytes)
 pkts bytes target     prot opt in     out     source               destination         
    0     0 VSERVER    all  --  *      *       0.0.0.0/0            192.168.1.21        

Chain POSTROUTING (policy ACCEPT 31 packets, 2013 bytes)
 pkts bytes target     prot opt in     out     source               destination         
   17   884 MASQUERADE  all  --  *      vlan1  !192.168.1.21         0.0.0.0/0           
    0     0 MASQUERADE  all  --  *      br0     192.168.2.0/24       192.168.2.0/24      

Chain OUTPUT (policy ACCEPT 31 packets, 2013 bytes)
 pkts bytes target     prot opt in     out     source               destination         

Chain VSERVER (1 references)
 pkts bytes target     prot opt in     out     source               destination         


Mount points

rootfs on / type rootfs (rw)
/dev/root on / type squashfs (ro)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devfs on /dev type tmpfs (rw,noatime)
devpts on /dev/pts type devpts (rw)
tmpfs on /tmp type tmpfs (rw,noatime)
usbfs on /proc/bus/usb type usbfs (rw)
/dev/discs/disca/part1 on /tmp/mnt/disca_1 type vfat (rw,noatime,fmask=0022,dmask=0022,codepage=cp866,iocharset=utf8)


Filesystem info

Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/root                 4736      4736         0 100% /
devfs                    14504         0     14504   0% /dev
tmpfs                    14504       172     14332   1% /tmp
/dev/discs/disca/part1
                       3918336      4404   3913932   0% /tmp/mnt/disca_1


Partitions

major minor  #blocks  name

  31     0        128 mtdblock0
  31     1       8000 mtdblock1
  31     2       6952 mtdblock2
  31     3         64 mtdblock3
  31     4       2304 mtdblock4
   8     0    3926016 sda
   8     1    3926010 sda1


USB HDD info

Attached devices:

Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: USBDisk  Model: RunDisk          Rev: 1.00
  Type:   Direct-Access                    ANSI  SCSI revision: 02


Process List

  PID USER       VSZ STAT COMMAND
    1 admin     1580 S    /sbin/init
    2 admin        0 SW<  [kthreadd]
    3 admin        0 SW<  [ksoftirqd/0]
    4 admin        0 SW<  [events/0]
    5 admin        0 SW<  [khelper]
   24 admin        0 SW<  [kblockd/0]
   46 admin        0 SW   [pdflush]
   47 admin        0 SW   [pdflush]
   48 admin        0 DW<  [kswapd0]
   49 admin        0 SW<  [aio/0]
   98 admin        0 SW<  [mtdblockd]
  186 admin     1604 S    syslogd -m 0 -O /tmp/syslog.log -S -D -l 7 -b 1
  189 admin     1604 S    klogd
  192 admin     1132 S    nas
  196 admin     1608 S    telnetd
  200 admin     1220 S    dropbear -4
  203 admin     1200 S    httpd vlan1
  208 nobody     940 S    dnsmasq
  214 admin     1068 S    lld2d br0 eth1
  221 admin        0 SW<  [khubd]
  277 admin      744 S    p9100d -f /dev/lp0 0
  303 admin        0 SW<  [scsi_eh_0]
  304 admin        0 SW<  [usb-storage]
  367 admin     1616 S    /sbin/udhcpc -i vlan1 -p /var/run/udhcpc0.pid -b -O
  368 admin     1600 S    watchdog
  382 admin     1036 S    /usr/sbin/vsftpd
  408 admin     9952 S    /tmp/mnt/disca_1/bin/./newcs -C /tmp/mnt/disca_1/bin
  409 admin     9952 S    /tmp/mnt/disca_1/bin/./newcs -C /tmp/mnt/disca_1/bin
  410 admin     9952 S    /tmp/mnt/disca_1/bin/./newcs -C /tmp/mnt/disca_1/bin
  411 admin     9952 S    /tmp/mnt/disca_1/bin/./newcs -C /tmp/mnt/disca_1/bin
  412 admin     9952 S    /tmp/mnt/disca_1/bin/./newcs -C /tmp/mnt/disca_1/bin
  414 nobody    1040 S    /usr/sbin/vsftpd
  416 admin     1084 S    /usr/sbin/vsftpd
  417 nobody    1040 S    /usr/sbin/vsftpd
  419 admin     1156 S    /usr/sbin/vsftpd
  420 admin     1608 S    sh -c /tmp/../usr/sbin/sysinfo > /tmp/sysinfo.htm
  421 admin     1608 S    /bin/sh /tmp/../usr/sbin/sysinfo
  441 admin     1608 R    ps


Kernel Modules

ftdi_sio 59024 2 - Live 0xc0254000
cdc_acm 17360 0 - Live 0xc01d3000
option 37552 0 - Live 0xc01b0000
usbserial 37088 6 ftdi_sio,option, Live 0xc01c0000
ntfs 128368 0 - Live 0xc0219000
usb_storage 103456 1 - Live 0xc01fe000
sd_mod 26480 2 - Live 0xc015a000
scsi_mod 114816 2 usb_storage,sd_mod, Live 0xc01e0000
uvcvideo 74208 0 - Live 0xc016f000
input_core 30416 1 uvcvideo, Live 0xc0121000
v4l2_common 16960 0 - Live 0xc0154000
videodev 40640 1 uvcvideo, Live 0xc0164000
usblp 16368 0 - Live 0xc0132000
ohci_hcd 23088 0 - Live 0xc012b000
ehci_hcd 44688 0 - Live 0xc0148000
usbcore 163424 10 ftdi_sio,cdc_acm,option,usbserial,usb_storage,uvcvideo,usblp,ohci_hcd,ehci_hcd, Live 0xc0187000
nf_nat_ftp 2944 0 - Live 0xc0111000
nf_conntrack_ftp 8544 1 nf_nat_ftp, Live 0xc010d000
wl 2009760 0 - Live 0xc037c000 (P)
et 60192 0 - Live 0xc0138000 (P)
igs 18608 1 wl, Live 0xc011b000 (P)
emf 23200 2 wl,igs, Live 0xc0114000 (P)


USB Devices


T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0001 Rev= 2.06
S:  Manufacturer=Linux 2.6.22.19 ohci_hcd
S:  Product=OHCI Host Controller
S:  SerialNumber=0000:00:03.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 2
B:  Alloc=  0/800 us ( 0%), #Int=  1, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 2.06
S:  Manufacturer=Linux 2.6.22.19 ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=0000:00:03.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480 MxCh= 2
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0424 ProdID=2502 Rev= 0.01
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  2mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=256ms

T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=054c ProdID=0243 Rev= 2.00
S:  Manufacturer=USBDisk
S:  Product=RunDisk
S:  SerialNumber=201001130000000000000001
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

T:  Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0403 ProdID=6010 Rev= 5.00
S:  Manufacturer=FTDI
S:  Product=Dual RS232
C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr= 90mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio
E:  Ad=83(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms


USB devfs Devices

Device         : Location : Info
/dev/ttyUSB0 : 1.2.0 : Manufacturer="FTDI" : Product="Dual RS232"
/dev/ttyUSB1 : 1.2.11 : Manufacturer="FTDI" : Product="Dual RS232"


CPU Info

system type		: Broadcom BCM5354 chip rev 3 pkg 0
processor		: 0
cpu model		: Broadcom BCM3302 V2.9
BogoMIPS		: 238.08
wait instruction	: no
microsecond timers	: yes
tlb_entries		: 32
extra interrupt vector	: no
hardware watchpoint	: no
ASEs implemented	: mips16
shadow register sets	: 1
VCED exceptions		: not available
VCEI exceptions		: not available

unaligned_instructions	: 0


Memory

MemTotal:        29008 kB
MemFree:          1024 kB
Buffers:          6036 kB
Cached:           8684 kB
SwapCached:          0 kB
Active:           8920 kB
Inactive:         8324 kB
SwapTotal:           0 kB
SwapFree:            0 kB
Dirty:               0 kB
Writeback:           0 kB
AnonPages:        2536 kB
Mapped:           1888 kB
Slab:             3360 kB
SReclaimable:     1144 kB
SUnreclaim:       2216 kB
PageTables:        284 kB
NFS_Unstable:        0 kB
Bounce:              0 kB
CommitLimit:     14504 kB
Committed_AS:    11544 kB
VmallocTotal:   786356 kB
VmallocUsed:      4192 kB
VmallocChunk:   780820 kB

Kód: Vybrat vše

Jan  1 01:00:02 syslogd started: BusyBox v1.18.3
Jan  1 01:00:02 kernel: klogd started: BusyBox v1.18.3 (2011-03-12 14:10:16 MSK)
Jan  1 01:00:02 kernel: Linux version 2.6.22.19 (root@localhost) (gcc version 4.3.5 (GCC) ) #6 Sat Mar 12 14:58:22 MSK 2011
Jan  1 01:00:02 kernel: CPU revision is: 00029029
Jan  1 01:00:02 kernel: Setting the PFC to its default value
Jan  1 01:00:02 kernel: Determined physical RAM map:
Jan  1 01:00:02 kernel:  memory: 02000000 @ 00000000 (usable)
Jan  1 01:00:03 dropbear[200]: Running in background
Jan  1 01:00:03 dnsmasq[208]: started, version 2.57 cachesize 512
Jan  1 01:00:03 dnsmasq[208]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-I18N DHCP no-scripts no-TFTP no-IDN
Jan  1 01:00:03 dnsmasq-dhcp[208]: DHCP, IP range 192.168.2.2 -- 192.168.2.200, lease time 1d
Jan  1 01:00:03 dnsmasq[208]: read /etc/hosts - 2 addresses
Jan  1 01:00:04 kernel: usbcore: registered new interface driver usbfs
Jan  1 01:00:04 kernel: usbcore: registered new interface driver hub
Jan  1 01:00:04 kernel: usbcore: registered new device driver usb
Jan  1 01:00:04 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan  1 01:00:04 kernel: ehci_hcd 0000:00:03.1: EHCI Host Controller
Jan  1 01:00:04 kernel: ehci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 1
Jan  1 01:00:04 kernel: ehci_hcd 0000:00:03.1: irq 6, io mem 0x18003800
Jan  1 01:00:04 kernel: ehci_hcd 0000:00:03.1: USB 0.0 started, EHCI 1.00
Jan  1 01:00:04 kernel: usb usb1: configuration #1 chosen from 1 choice
Jan  1 01:00:04 kernel: hub 1-0:1.0: USB hub found
Jan  1 01:00:04 kernel: hub 1-0:1.0: 2 ports detected
Jan  1 01:00:05 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Jan  1 01:00:05 kernel: ohci_hcd 0000:00:03.0: OHCI Host Controller
Jan  1 01:00:05 kernel: usb 1-1: new high speed USB device using ehci_hcd and address 2
Jan  1 01:00:05 kernel: ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
Jan  1 01:00:05 kernel: ohci_hcd 0000:00:03.0: irq 6, io mem 0x18003000
Jan  1 01:00:05 kernel: usb usb2: configuration #1 chosen from 1 choice
Jan  1 01:00:05 kernel: hub 2-0:1.0: USB hub found
Jan  1 01:00:05 kernel: hub 2-0:1.0: 2 ports detected
Jan  1 01:00:05 kernel: usb 1-1: configuration #1 chosen from 1 choice
Jan  1 01:00:05 kernel: hub 1-1:1.0: USB hub found
Jan  1 01:00:05 kernel: hub 1-1:1.0: 2 ports detected
Jan  1 01:00:05 kernel: usb 1-1.1: new high speed USB device using ehci_hcd and address 3
Jan  1 01:00:05 kernel: usb 1-1.1: configuration #1 chosen from 1 choice
Jan  1 01:00:05 kernel: usb 1-1.2: new full speed USB device using ehci_hcd and address 4
Jan  1 01:00:05 kernel: usb 1-1.2: configuration #1 chosen from 1 choice
Jan  1 01:00:06 kernel: usbcore: registered new interface driver usblp
Jan  1 01:00:06 kernel: Linux video capture interface: v2.00
Jan  1 01:00:06 kernel: usbcore: registered new interface driver uvcvideo
Jan  1 01:00:06 kernel: USB Video Class driver (v0.1.0)
Jan  1 01:00:06 kernel: SCSI subsystem initialized
Jan  1 01:00:07 kernel: Initializing USB Mass Storage driver...
Jan  1 01:00:07 kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan  1 01:00:07 kernel: usbcore: registered new interface driver usb-storage
Jan  1 01:00:07 kernel: USB Mass Storage support registered.
Jan  1 01:00:08 kernel: NTFS driver 2.1.28 [Flags: R/O MODULE].
Jan  1 01:00:08 kernel: usbcore: registered new interface driver usbserial
Jan  1 01:00:08 kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
Jan  1 01:00:08 kernel: usbcore: registered new interface driver usbserial_generic
Jan  1 01:00:08 kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core
Jan  1 01:00:09 kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port)
Jan  1 01:00:09 kernel: usbcore: registered new interface driver option
Jan  1 01:00:09 kernel: drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.2
Jan  1 01:00:09 kernel: usbcore: registered new interface driver cdc_acm
Jan  1 01:00:09 kernel: drivers/usb/class/cdc-acm.c: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
Jan  1 01:00:09 dnsmasq[208]: read /etc/hosts - 2 addresses
Jan  1 01:00:09 dhcp client: deconfig: lease is lost
Jan  1 01:00:09 kernel: scsi 0:0:0:0: Direct-Access     USBDisk  RunDisk          1.00 PQ: 0 ANSI: 2
Jan  1 01:00:09 kernel: sd 0:0:0:0: [sda] 7852032 512-byte hardware sectors (4020 MB)
Jan  1 01:00:09 kernel: sd 0:0:0:0: [sda] Write Protect is off
Jan  1 01:00:09 kernel: sd 0:0:0:0: [sda] Assuming drive cache: write through
Jan  1 01:00:09 kernel:  sda: sda1
Jan  1 01:00:10 kernel: sd 0:0:0:0: [sda] Attached SCSI removable disk
Jan  1 01:00:10 dnsmasq[208]: read /etc/hosts - 2 addresses
Jan  1 01:00:10 dnsmasq[208]: using nameserver 192.168.1.1#53
Jan  1 01:00:10 dnsmasq[208]: using nameserver 192.168.5.1#53
Jan  1 01:00:11 dhcp client: bound IP : 192.168.1.21 from 192.168.1.1
Mar 23 20:49:08 ntp client: Synchronizing time with time.nist.gov...
Mar 23 20:49:08 kernel: FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Mar 23 20:49:08 USB storage: vfat fs at /dev/discs/disca/part1 mounted to /tmp/mnt/disca_1
Mar 23 20:49:09 kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device
Mar 23 20:49:09 kernel: ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
Mar 23 20:49:09 kernel: drivers/usb/serial/ftdi_sio.c: Detected FT2232C
Mar 23 20:49:09 kernel: usb 1-1.2: Number of endpoints 2
Mar 23 20:49:09 kernel: usb 1-1.2: Endpoint 1 MaxPacketSize 64
Mar 23 20:49:09 kernel: usb 1-1.2: Endpoint 2 MaxPacketSize 64
Mar 23 20:49:09 kernel: usb 1-1.2: Setting MaxPacketSize 64
Mar 23 20:49:09 kernel: usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
Mar 23 20:49:09 kernel: ftdi_sio 1-1.2:1.1: FTDI USB Serial Device converter detected
Mar 23 20:49:09 kernel: drivers/usb/serial/ftdi_sio.c: Detected FT2232C
Mar 23 20:49:09 kernel: usb 1-1.2: Number of endpoints 2
Mar 23 20:49:09 kernel: usb 1-1.2: Endpoint 1 MaxPacketSize 64
Mar 23 20:49:09 kernel: usb 1-1.2: Endpoint 2 MaxPacketSize 64
Mar 23 20:49:09 kernel: usb 1-1.2: Setting MaxPacketSize 64
Mar 23 20:49:09 kernel: usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB1
Mar 23 20:49:09 kernel: usbcore: registered new interface driver ftdi_sio
Mar 23 20:49:09 kernel: drivers/usb/serial/ftdi_sio.c: v1.5.0:USB FTDI Serial Converters Driver

Kód: Vybrat vše

<newCSconfig>
	<readers name="Card Readers">
		  <device>
			<name>phoenix0</name>
			<type>phoenix</type>
			<node>/dev/ttyUSB0</node>
			<mhz>358</mhz> <!--  or 357 -->
			<parity>even</parity>
			<reset>inverse</reset>
			<export>yes</export>
			<enabled>yes</enabled>
			<blocksa>yes</blocksa>
			<blockua>yes</blockua>
			<blockga>yes</blockga>
			<PTShandshake>no</PTShandshake> 
			<carddetect>no</carddetect>
			<newcamd_port>10001</newcamd_port>
			<Seca-PPV>no</Seca-PPV>
			<pincode>0000</pincode>
			<priority>round</priority> <!--  hard is default -->
			<sid>
			<allow>
			<id></id>
			</allow>
			<deny>
			<id></id>
			</deny>
			</sid>
                 </device>
			
	          <device>
			<name>phoenix1</name>
			<type>phoenix</type>
			<node>/dev/ttyUSB1</node>
			<mhz>358</mhz> <!--  or 357 -->
			<parity>even</parity>
			<reset>inverse</reset>
			<export>yes</export>
			<enabled>yes</enabled>
			<blocksa>yes</blocksa>
			<blockua>yes</blockua>
			<blockga>yes</blockga>
			<PTShandshake>no</PTShandshake>
			<carddetect>no</carddetect>
			<newcamd_port>10002</newcamd_port>
			<Seca-PPV>no</Seca-PPV>
			<pincode>0000</pincode>
			<priority>round</priority>
			<sid>
			<allow>
			<id></id>
			</allow>
			<deny>
			<id></id>
			</deny>
			</sid>
	          </device>
	       
	</readers>
	<radegastserver>
			<enabled>No</enabled>
			<port>10003</port>
			<allow>
				<hostname>localhost</hostname>
			</allow>
	</radegastserver>
	<cache>
			<emm>20</emm>
			<ecm>20</ecm>
	</cache>
        <httpd>
               <server>
			<port>23000</port>
			<enabled>yes</enabled>
		</server>
		<user>
		<name>newcs</name>
    		<password>newcs</password>
                <accesslevel>admin</accesslevel>
		</user>
	</httpd>
	<debug>
			<password></password>
			<level>normal</level>
			<type>init</type>
			<output>console,tcp</output>
			<console_options>normal,init</console_options>
			<tcp_port>1002</tcp_port>
			<tcp_options>normal,init</tcp_options>
	</debug>
	<newcamdserver>
			<enabled>Yes</enabled>
			<name>newcs</name>
			<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
      <user>
				<name>box1</name>
				<password>box1</password>
				<au>off</au>
        			</user>
      <user>
				<name>box2</name>
				<password>box2</password>
				<au>off</au>
        			</user>
      <user>
				<name>box3</name>
				<password>box3</password>
				<au>off</au>
        			</user>
      <user>
				<name>box4</name>
				<password>box4</password>
				<au>off</au>
        			</user>
      <user>
				<name>box5</name>
				<password>box5</password>
				<au>off</au>
        			</user>
    	</newcamdserver>
</newCSconfig>

rosssss · Příspěvek od **rosssss** » 23.březen 2011 - 21:40

takze!!opet se omlouvam za mystifikaci..

...ctecka je v rezimu phoenix....

tomuto pripisuju na vrub detekci karet.....

ale proc se nepripojim na server,ma na to vliv v jakem rezimu je ctecka??

takze jsem nechal rezim phoenix
v newcs.xml jsem upravil reset prepsal misto inverse na normal

, nacteno 0d03 a 0b00, zatim po lokale jedu......

tak to zatim jede......

$\:D/$

rsevcik · Příspěvek od **rsevcik** » 24.březen 2011 - 8:07

Tak to je dobře že jedeš kdybys nenapsal v jakém je režimu, určitě by jsme ti napsali že ten reset invers je asi špatně

Nepenthes · Příspěvek od **Nepenthes** » 24.březen 2011 - 11:24

Zdravím, rozběhl jsem poslední verzi SVN 4853 oscamu na routeru a vše funguje, ale po chvíli sledování mi začne log hlásit

2011/03/24 11:10:48 47C05 c ncd_send_dcw: er->cpti=0, cl_msgid=38, 80
2011/03/24 11:10:48 47C05 c send 15 bytes to client
2011/03/24 11:10:48 47C05 00 0D 00 26 00 00 00 00 00 00 00 00 80 00 00
2011/03/24 11:10:48 47C05 c user (0D0F&000004/36F6/7C:3963): not found (5013 ms) by reader-0 (of 1 avail 1)
2011/03/24 11:10:48 47C05 c cw:
2011/03/24 11:10:48 47C05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A obraz už nenaběhne, až po restartu přijímače.Co přesně tahle hláška znamená, má to co do činění s pomalou odezvou, kdy karta včas neodpoví ? Nebo to je jen nastavením v konfigu k oscamu ?

rsevcik · Příspěvek od **rsevcik** » 24.březen 2011 - 15:49

Tak mi došel asus rt-n16 dal jsem do něj ddwrt to je ok. Jen se do něj nemohu dostat přes winscp nevím proč píše mi jestli běží sftp servr moc to neznám tak nevím jestli nějaké nastavení. Přitom přes putty v poho tak nevím už jsem z toho asi zblblej

rosssss · Příspěvek od **rosssss** » 24.březen 2011 - 16:47

winsp mi taky delal problemy u wl500gp v1, kdyz jsem zkousel open wrt,moje zkusenost v zalozce editovat jsem zmenil protokol na scp, on sice zahlasi chybu-necha se premlouvat,ale pak se rozjede a muzes pracovat...mi to takto jde,vsak zkus a uvidis....

rsevcik · Příspěvek od **rsevcik** » 24.březen 2011 - 16:59

Super dík jede. Ale skylink mi nejede jen omezená nabýdka tak nevím co se děje

rosssss · Příspěvek od **rosssss** » 24.březen 2011 - 17:12

ja jsem ten open wrt zatim nerozjel......

AB-FÓRUM - Satelitné fórum (Satelity, DVB-T/T2, DVB-C, IPTV)

AB-FÓRUM - Satelitné fórum (Satelity, DVB-T/T2, DVB-C, IPTV)

ASUS WL 500 gp

Re: ASUS WL 500 gp

Re: ASUS WL 500 gp

Re: ASUS WL 500 gp

Re: ASUS WL 500 gp

Re: ASUS WL 500 gp

Re: ASUS WL 500 gp

Re: ASUS WL 500 gp

Re: ASUS WL 500 gp

Re: ASUS WL 500 gp

Re: ASUS WL 500 gp

Re: ASUS WL 500 gp

Re: ASUS WL 500 gp

Re: ASUS WL 500 gp

Re: ASUS WL 500 gp

Re: ASUS WL 500 gp

Re: ASUS WL 500 gp

Re: ASUS WL 500 gp

Re: ASUS WL 500 gp

Re: ASUS WL 500 gp

Re: ASUS WL 500 gp