Oscam a jeho nastavenie (s popisom - testovane v E2)

Oscam - rady, návody a postupy
Odpovědět
Uživatelský avatar
marecek29
Moderátor
Moderátor
Příspěvky: 825
Registrován: 04.červenec 2009 - 14:48

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od marecek29 »

Na takto polozenou otazku pomuze jen toto
Nemáte oprávnění prohlížet přiložené soubory.
ObrázekObrázekObrázekObrázek




Na dotazy nepoužívejte SZ, ale fórum
gusto1
Znalec fóra
Znalec fóra
Příspěvky: 617
Registrován: 07.září 2011 - 22:32

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od gusto1 »

Alebo si zapni TV8 (tam to neni kodovane) http://www.tv8.sk/wp/?p=773 velmi dobry je vraj rudy :-D
djmk
Mírně pokročilý
Mírně pokročilý
Příspěvky: 63
Registrován: 10.únor 2008 - 10:55
satelitni prijimac: 2ks- Vu+ UNO 4K SE
Bydliště: Usa
Kontaktovat uživatele:

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od djmk »

gusto1 píše:Alebo si zapni TV8 (tam to neni kodovane) http://www.tv8.sk/wp/?p=773 velmi dobry je vraj rudy :-D
aj to je rada [-o<
maciii
Registrovaný
Registrovaný
Příspěvky: 11
Registrován: 01.leden 2013 - 19:50

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od maciii »

Mám teoretický dotaz :oops: . Když by na DM7020 (OpenaATV) běžel OSCAM s jednou kartou na S**L**K (ICE) zvládne to utáhnout dejme tomu 30-50 userů používajících MGCam 1.38 nebo je to technicky zcela špatně?
Uživatelský avatar
milino
Mírně pokročilý
Mírně pokročilý
Příspěvky: 80
Registrován: 09.listopad 2007 - 15:12
satelitni prijimac: gigablue ue 4k,Formuler1
Bydliště: topoľčany

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od milino »

Mám jedenu otázku.Oživujem starý HDIPBox91.Pokušam sa zdielať ICE kartu cez oscam.Skusil som snáď všetko.Typy oscam,confingi a rôzne úpravy a nie a nie sa pripojiť.Pritom sharing na C-linku z vonku uplne v pohode.Zato na vlastnu kartu v domacnosti sa pripojí,ale nič nedekoduje.Zato Dreambox cez Cccam uplne v pohode.
Tušite niekto kde robím chybu?
Diky.
GigaBlue UHD UE 4K,DM 800HD Se ,Formuler F1,Uclan Ustym 4K OTT Premium
,+nejaký sat.šrot.Paraboly dve,LNB 8ks
dlhe_pole
Veterán fóra
Veterán fóra
Příspěvky: 1171
Registrován: 05.srpen 2013 - 13:16
satelitni prijimac: VuSolo4k DM800SE kathrein910

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od dlhe_pole »

kukni na prispevek od marecek29 a hned budes mat jasno
Uživatelský avatar
milino
Mírně pokročilý
Mírně pokročilý
Příspěvky: 80
Registrován: 09.listopad 2007 - 15:12
satelitni prijimac: gigablue ue 4k,Formuler1
Bydliště: topoľčany

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od milino »

Ktorý príspevok je ich tu mnoho?Díky
GigaBlue UHD UE 4K,DM 800HD Se ,Formuler F1,Uclan Ustym 4K OTT Premium
,+nejaký sat.šrot.Paraboly dve,LNB 8ks
Uživatelský avatar
marecek29
Moderátor
Moderátor
Příspěvky: 825
Registrován: 04.červenec 2009 - 14:48

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od marecek29 »

Na teto strance s obrazkem.
ObrázekObrázekObrázekObrázek




Na dotazy nepoužívejte SZ, ale fórum
Uživatelský avatar
milino
Mírně pokročilý
Mírně pokročilý
Příspěvky: 80
Registrován: 09.listopad 2007 - 15:12
satelitni prijimac: gigablue ue 4k,Formuler1
Bydliště: topoľčany

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od milino »

Pochopil:Ked mi to radil "dlhe_pole" čo iná som mohol čakať.Len inteligentnu radu.
GigaBlue UHD UE 4K,DM 800HD Se ,Formuler F1,Uclan Ustym 4K OTT Premium
,+nejaký sat.šrot.Paraboly dve,LNB 8ks
Uživatelský avatar
marecek29
Moderátor
Moderátor
Příspěvky: 825
Registrován: 04.červenec 2009 - 14:48

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od marecek29 »

Na to jak se ptas ti nikdo jinak neodpovi,nedavas zadny info.
ObrázekObrázekObrázekObrázek




Na dotazy nepoužívejte SZ, ale fórum
Uživatelský avatar
Hypnos
Mírně pokročilý
Mírně pokročilý
Příspěvky: 76
Registrován: 17.duben 2007 - 22:33
Kontaktovat uživatele:

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od Hypnos »

Ahoj, stale mam problemy s dekodovanim u oscamu. Bezi treba 1 den, nebo pul hodiny. Jakmile zacnu prepinat mezi programy, tak vse se tvari ze karta dekoduje ale je tma. Pouzivam img OpenPLI, posledni verze a oscam taky tak.
Zde je log a prikladam i configy. Muzete se prosim na to kouknout? Mam podezreni na img, ze ty posled stoji za starou backoru, protoze me to uz udelal i s CCcamem. Proste pri prepnuti najednou tma a konec, ale v info baru a na webovem rozhrani vidim ze normalne cte z karty.

Kód: Vybrat vše

2015/09/13 14:05:11 00000000       (main) starting thread client work
2015/09/13 14:05:11 00000000       (main) client work thread started
2015/09/13 14:05:11 5A940EA6 r   (reader) skylink [cryptoworks] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/09/13 14:05:13 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:13 5A940EA6 r   (reader)   00 
2015/09/13 14:05:13 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:13 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW2: 00
2015/09/13 14:05:13 5A940EA6 r   (reader) skylink [cryptoworks] Answer from cardreader:
2015/09/13 14:05:13 5A940EA6 r   (reader)   90 00 
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IO: Write timeout 496 us, write delay 0 us, to send 5 char(s), chunksize 5 char(s)
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IO: Sending:
2015/09/13 14:05:14 5A940EA6 r   (reader)   A4 44 00 00 2E 
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:14 5A940EA6 r   (reader)   44 
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 12 ETU (496 us)
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit size 46 bytes, expected len 2 bytes, delay 0 us, timeout=496 us
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit:
2015/09/13 14:05:14 5A940EA6 r   (reader)   00 00 2B 83 01 14 C0 1C A0 00 19 19 9F D9 FF B1 
2015/09/13 14:05:14 5A940EA6 r   (reader)   15 7F D2 63 D6 84 D0 A9 A3 5E 4D B5 CC DB A7 10 
2015/09/13 14:05:14 5A940EA6 r   (reader)   F9 55 9C 40 DF 08 EF 74 31 0C 84 92 48 14 
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IO: Write timeout 496 us, write delay 0 us, to send 46 char(s), chunksize 46 char(s)
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IO: Sending:
2015/09/13 14:05:14 5A940EA6 r   (reader)   00 00 2B 83 01 14 C0 1C A0 00 19 19 9F D9 FF B1 
2015/09/13 14:05:14 5A940EA6 r   (reader)   15 7F D2 63 D6 84 D0 A9 A3 5E 4D B5 CC DB A7 10 
2015/09/13 14:05:14 5A940EA6 r   (reader)   F9 55 9C 40 DF 08 EF 74 31 0C 84 92 48 14 
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:14 5A940EA6 r   (reader)   90 
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW1: 90
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:14 5A940EA6 r   (reader)   00 
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW2: 00
2015/09/13 14:05:14 5A940EA6 r   (reader) skylink [cryptoworks] Answer from cardreader:
2015/09/13 14:05:14 5A940EA6 r   (reader)   90 00 
2015/09/13 14:05:16 5A940EA6 r   (reader)   D1 6A 2C A0 F1 58 D0 98 E1 C3 66 B4 F8 0D 9F 4B 
2015/09/13 14:05:16 5A940EA6 r   (reader)   28 76 0E F4 04 B2 D6 64 CE 01 44 EE DF 08 FC C9 
2015/09/13 14:05:16 5A940EA6 r   (reader)   9B FD 9B D7 97 B3 
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:16 5A940EA6 r   (reader)   90 
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW1: 90
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:16 5A940EA6 r   (reader)   00 
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW2: 00
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] Answer from cardreader:
2015/09/13 14:05:16 5A940EA6 r   (reader)   90 00 
2015/09/13 14:05:16 55503086 c   (dvbapi) New events occurred on 1 of 7 handlers after 195 ms inactivity
2015/09/13 14:05:16 55503086 c   (dvbapi) Now handling fd 8 that reported event 3
2015/09/13 14:05:16 55503086 c   (dvbapi) Received:
2015/09/13 14:05:16 55503086 c   (dvbapi)   86 70 08 A9 FF 83 01 04 84 01 00 
2015/09/13 14:05:16 55503086 c   (dvbapi) Demuxer 0 Filter 3 fetched emm data
2015/09/13 14:05:16 55503086 c      (emm) emm:
2015/09/13 14:05:16 55503086 c      (emm)   86 70 08 A9 FF 83 01 04 84 01 00 
2015/09/13 14:05:16 55503086 c   (reader) skylink [cryptoworks] EMM: reader 0D96 match since emmpid has no provid -> SEND!
2015/09/13 14:05:16 55503086 c   (reader) skylink [cryptoworks] EMM: Entered cryptoworks_get_emm_type ep->emm[0]=86
2015/09/13 14:05:16 55503086 c   (reader) skylink [cryptoworks] EMM: SHARED (Header)
2015/09/13 14:05:16 55503086 c   (reader) skylink [cryptoworks] EMM: shared emm (EMM-SB)
2015/09/13 14:05:16 651913A2 h    (webif) WebIf: Received stale header from 10.0.0.10 (nonce=fb4a63657595ba9ac17f4a1cf9fc5f5a, expectednonce=c27917684f9e372b05d71a73c1c02ee9, opaque=381484120acf78f2e07de17fedf60ba1).
2015/09/13 14:05:16 651913A2 h    (webif) WebIf: Origin checked. Result: access from 10.0.0.10 => allowed
2015/09/13 14:05:16 00000000       (work) start reader thread action 13
2015/09/13 14:05:16 00000000       (main) starting thread client work
2015/09/13 14:05:16 00000000       (main) client work thread started
2015/09/13 14:05:16 5A940EA6 r     (work) data from add_job action=13 client r skylink
2015/09/13 14:05:16 00000000       (main) starting thread client work
2015/09/13 14:05:16 00000000       (main) client work thread started
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IO: Sending:
2015/09/13 14:05:16 5A940EA6 r   (reader)   00 00 43 83 01 0C C0 34 90 00 31 A8 C0 56 5F 74 
2015/09/13 14:05:16 5A940EA6 r   (reader)   9F FA B2 E8 57 23 99 16 AE 77 4A B5 68 01 6A 1D 
2015/09/13 14:05:16 5A940EA6 r   (reader)   FF D1 F9 41 20 F7 D7 D1 9A 1D 7B 7B 45 F6 1E 5A 
2015/09/13 14:05:16 5A940EA6 r   (reader)   9C 59 25 D5 CA 7A 39 1D E5 A7 8C 2E DF 08 BD BF 
2015/09/13 14:05:16 5A940EA6 r   (reader)   A1 B7 51 03 9C DD 
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:16 5A940EA6 r   (reader)   90 
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW1: 90
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:16 5A940EA6 r   (reader)   00 
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW2: 00
2015/09/13 14:05:16 5A940EA6 r   (reader) skylink [cryptoworks] Answer from cardreader:
2015/09/13 14:05:16 5A940EA6 r   (reader)   90 00 
2015/09/13 14:05:17 55503086 c   (dvbapi) New events occurred on 1 of 7 handlers after 499 ms inactivity
2015/09/13 14:05:17 55503086 c   (dvbapi) Now handling fd 8 that reported event 3
2015/09/13 14:05:17 55503086 c   (dvbapi) Received:
2015/09/13 14:05:17 55503086 c   (dvbapi)   86 70 08 A9 FF 83 01 04 84 01 00 
2015/09/13 14:05:17 55503086 c   (dvbapi) Demuxer 0 Filter 3 fetched emm data
2015/09/13 14:05:17 55503086 c      (emm) emm:
2015/09/13 14:05:17 55503086 c      (emm)   86 70 08 A9 FF 83 01 04 84 01 00 
2015/09/13 14:05:17 55503086 c   (reader) skylink [cryptoworks] EMM: reader 0D96 match since emmpid has no provid -> SEND!
2015/09/13 14:05:17 55503086 c   (reader) skylink [cryptoworks] EMM: Entered cryptoworks_get_emm_type ep->emm[0]=86
2015/09/13 14:05:17 55503086 c   (reader) skylink [cryptoworks] EMM: SHARED (Header)
2015/09/13 14:05:17 55503086 c   (reader) skylink [cryptoworks] EMM: shared emm (EMM-SB)
2015/09/13 14:05:17 00000000       (work) start reader thread action 13
2015/09/13 14:05:17 00000000       (main) starting thread client work
2015/09/13 14:05:17 00000000       (main) client work thread started
2015/09/13 14:05:17 5A940EA6 r     (work) data from add_job action=13 client r skylink
2015/09/13 14:05:17 00000000       (main) starting thread client work
2015/09/13 14:05:17 00000000       (main) client work thread started
2015/09/13 14:05:17 5A940EA6 r   (reader) skylink [cryptoworks] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/09/13 14:05:18 55503086 c   (reader) skylink [cryptoworks] EMM: reader 0D96 match since emmpid has no provid -> SEND!
2015/09/13 14:05:18 55503086 c   (reader) skylink [cryptoworks] EMM: Entered cryptoworks_get_emm_type ep->emm[0]=86
2015/09/13 14:05:18 55503086 c   (reader) skylink [cryptoworks] EMM: SHARED (Header)
2015/09/13 14:05:18 55503086 c   (reader) skylink [cryptoworks] EMM: shared emm (EMM-SB)
2015/09/13 14:05:18 00000000       (work) start reader thread action 13
2015/09/13 14:05:18 00000000       (main) starting thread client work
2015/09/13 14:05:18 00000000       (main) client work thread started
2015/09/13 14:05:18 5A940EA6 r     (work) data from add_job action=13 client r skylink
2015/09/13 14:05:18 00000000       (main) starting thread client work
2015/09/13 14:05:18 00000000       (main) client work thread started
2015/09/13 14:05:18 5A940EA6 r   (reader) skylink [cryptoworks] cardreader_do_checkhealth: reader->card_status = 2, ret = 1

2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:20 5A940EA6 r   (reader)   48 
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 12 ETU (496 us)
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit size 87 bytes, expected len 2 bytes, delay 0 us, timeout=496 us
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit:
2015/09/13 14:05:20 5A940EA6 r   (reader)   00 00 54 80 04 00 12 8F A9 83 01 04 84 01 00 C0 
2015/09/13 14:05:20 5A940EA6 r   (reader)   3C 02 8F A9 00 37 11 52 A7 35 FC 89 C9 C4 C9 B2 
2015/09/13 14:05:20 5A940EA6 r   (reader)   CC 2A 30 0E F9 5B F2 B5 8F 60 C1 DF D0 BC 39 65 
2015/09/13 14:05:20 5A940EA6 r   (reader)   77 9E 7E 7F 2D B0 18 AC 36 40 06 35 99 3D 0B A1 
2015/09/13 14:05:20 5A940EA6 r   (reader)   9A FA 4B 35 7A FC 1C 79 E1 E0 AA D2 A9 DF 08 4B 
2015/09/13 14:05:20 5A940EA6 r   (reader)   3A 4E D8 07 64 0E 0B 
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IO: Write timeout 496 us, write delay 0 us, to send 87 char(s), chunksize 87 char(s)
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IO: Sending:
2015/09/13 14:05:20 5A940EA6 r   (reader)   00 00 54 80 04 00 12 8F A9 83 01 04 84 01 00 C0 
2015/09/13 14:05:20 5A940EA6 r   (reader)   3C 02 8F A9 00 37 11 52 A7 35 FC 89 C9 C4 C9 B2 
2015/09/13 14:05:20 5A940EA6 r   (reader)   CC 2A 30 0E F9 5B F2 B5 8F 60 C1 DF D0 BC 39 65 
2015/09/13 14:05:20 5A940EA6 r   (reader)   77 9E 7E 7F 2D B0 18 AC 36 40 06 35 99 3D 0B A1 
2015/09/13 14:05:20 5A940EA6 r   (reader)   9A FA 4B 35 7A FC 1C 79 E1 E0 AA D2 A9 DF 08 4B 
2015/09/13 14:05:20 5A940EA6 r   (reader)   3A 4E D8 07 64 0E 0B 
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:20 5A940EA6 r   (reader)   90 
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW1: 90
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:20 5A940EA6 r   (reader)   00 
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW2: 00
2015/09/13 14:05:20 5A940EA6 r   (reader) skylink [cryptoworks] Answer from cardreader:
2015/09/13 14:05:20 5A940EA6 r   (reader)   90 00 
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:21 5A940EA6 r   (reader)   44 
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 12 ETU (496 us)
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit size 70 bytes, expected len 2 bytes, delay 0 us, timeout=496 us
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit:
2015/09/13 14:05:21 5A940EA6 r   (reader)   00 00 43 83 01 1C C0 34 B0 00 31 10 DD C6 D8 84 
2015/09/13 14:05:21 5A940EA6 r   (reader)   C0 DF 27 13 6B 25 CB C6 A1 E2 3C 5B 40 50 C1 E5 
2015/09/13 14:05:21 5A940EA6 r   (reader)   E6 0B 09 75 0C D5 A2 46 26 78 F8 C8 A9 9D 87 10 
2015/09/13 14:05:21 5A940EA6 r   (reader)   A9 4B B0 22 44 8A 88 DB 80 E8 8E C2 DF 08 38 ED 
2015/09/13 14:05:21 5A940EA6 r   (reader)   A6 86 16 6D BF 1E 
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IO: Write timeout 496 us, write delay 0 us, to send 70 char(s), chunksize 70 char(s)
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IO: Sending:
2015/09/13 14:05:21 5A940EA6 r   (reader)   00 00 43 83 01 1C C0 34 B0 00 31 10 DD C6 D8 84 
2015/09/13 14:05:21 5A940EA6 r   (reader)   C0 DF 27 13 6B 25 CB C6 A1 E2 3C 5B 40 50 C1 E5 
2015/09/13 14:05:21 5A940EA6 r   (reader)   E6 0B 09 75 0C D5 A2 46 26 78 F8 C8 A9 9D 87 10 
2015/09/13 14:05:21 5A940EA6 r   (reader)   A9 4B B0 22 44 8A 88 DB 80 E8 8E C2 DF 08 38 ED 
2015/09/13 14:05:21 5A940EA6 r   (reader)   A6 86 16 6D BF 1E 
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:21 5A940EA6 r   (reader)   90 
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW1: 90
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:21 5A940EA6 r   (reader)   00 
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW2: 00
2015/09/13 14:05:21 5A940EA6 r   (reader) skylink [cryptoworks] Answer from cardreader:
2015/09/13 14:05:21 5A940EA6 r   (reader)   90 00 
2015/09/13 14:05:22 5A940EA6 r   (reader)   1B C2 FA 45 1A 
2015/09/13 14:05:22 5A940EA6 r   (reader) skylink [cryptoworks] IO: Write timeout 496 us, write delay 0 us, to send 53 char(s), chunksize 53 char(s)
2015/09/13 14:05:22 5A940EA6 r   (reader) skylink [cryptoworks] IO: Sending:
2015/09/13 14:05:22 5A940EA6 r   (reader)   00 00 32 83 01 04 C0 23 80 00 20 C3 00 84 01 EE 
2015/09/13 14:05:22 5A940EA6 r   (reader)   48 0E B5 5C F2 BD D1 C1 B7 03 77 D3 20 BD F5 4D 
2015/09/13 14:05:22 5A940EA6 r   (reader)   0A 25 BD D4 11 7A A0 5B EA 78 32 DF 08 9F 50 5F 
2015/09/13 14:05:22 5A940EA6 r   (reader)   1B C2 FA 45 1A 
2015/09/13 14:05:22 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:22 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:22 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:22 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:22 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:22 5A940EA6 r   (reader)   90 
2015/09/13 14:05:22 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:22 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW1: 90
2015/09/13 14:05:22 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:22 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:22 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:22 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:22 5A940EA6 r   (reader)   00 
2015/09/13 14:05:22 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:22 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW2: 00
2015/09/13 14:05:22 5A940EA6 r   (reader) skylink [cryptoworks] Answer from cardreader:
2015/09/13 14:05:22 5A940EA6 r   (reader)   90 00 
2015/09/13 14:05:23 55503086 c   (dvbapi) New events occurred on 1 of 7 handlers after 499 ms inactivity
2015/09/13 14:05:23 55503086 c   (dvbapi) Now handling fd 8 that reported event 3
2015/09/13 14:05:23 55503086 c   (dvbapi) Received:
2015/09/13 14:05:23 55503086 c   (dvbapi)   86 70 08 A9 FF 83 01 04 84 01 00 
2015/09/13 14:05:23 55503086 c   (dvbapi) Demuxer 0 Filter 3 fetched emm data
2015/09/13 14:05:23 55503086 c      (emm) emm:
2015/09/13 14:05:23 55503086 c      (emm)   86 70 08 A9 FF 83 01 04 84 01 00 
2015/09/13 14:05:23 55503086 c   (reader) skylink [cryptoworks] EMM: reader 0D96 match since emmpid has no provid -> SEND!
2015/09/13 14:05:23 55503086 c   (reader) skylink [cryptoworks] EMM: Entered cryptoworks_get_emm_type ep->emm[0]=86
2015/09/13 14:05:23 55503086 c   (reader) skylink [cryptoworks] EMM: SHARED (Header)
2015/09/13 14:05:23 55503086 c   (reader) skylink [cryptoworks] EMM: shared emm (EMM-SB)
2015/09/13 14:05:23 00000000       (work) start reader thread action 13
2015/09/13 14:05:23 00000000       (main) starting thread client work
2015/09/13 14:05:23 00000000       (main) client work thread started
2015/09/13 14:05:23 5A940EA6 r     (work) data from add_job action=13 client r skylink
2015/09/13 14:05:23 00000000       (main) starting thread client work
2015/09/13 14:05:23 00000000       (main) client work thread started
2015/09/13 14:05:23 5A940EA6 r   (reader) skylink [cryptoworks] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/09/13 14:05:23 5A940EA6 r   (reader) skylink [cryptoworks] IO: Write timeout 496 us, write delay 0 us, to send 53 char(s), chunksize 53 char(s)
2015/09/13 14:05:23 5A940EA6 r   (reader) skylink [cryptoworks] IO: Sending:
2015/09/13 14:05:23 5A940EA6 r   (reader)   00 00 32 83 01 0C C0 23 90 00 20 28 49 93 A7 87 
2015/09/13 14:05:23 5A940EA6 r   (reader)   B2 88 F6 E5 4E 30 C7 A7 96 B2 F4 B1 C1 84 06 EC 
2015/09/13 14:05:23 5A940EA6 r   (reader)   89 4A BF 17 D7 85 E0 F1 0C 7A AD DF 08 31 0A 02 
2015/09/13 14:05:23 5A940EA6 r   (reader)   E8 10 AE 46 1E 
2015/09/13 14:05:23 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:23 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:23 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:23 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:23 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:23 5A940EA6 r   (reader)   90 
2015/09/13 14:05:23 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:23 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW1: 90
2015/09/13 14:05:23 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:23 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:23 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:23 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:23 5A940EA6 r   (reader)   00 
2015/09/13 14:05:23 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:23 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW2: 00
2015/09/13 14:05:23 5A940EA6 r   (reader) skylink [cryptoworks] Answer from cardreader:
2015/09/13 14:05:23 5A940EA6 r   (reader)   90 00 
2015/09/13 14:05:24 55503086 c   (dvbapi) New events occurred on 1 of 7 handlers after 397 ms inactivity
2015/09/13 14:05:24 55503086 c   (dvbapi) Now handling fd 8 that reported event 3
2015/09/13 14:05:24 55503086 c   (dvbapi) Received:
2015/09/13 14:05:24 55503086 c   (dvbapi)   86 70 08 A9 FF 83 01 04 84 01 00 
2015/09/13 14:05:24 55503086 c   (dvbapi) Demuxer 0 Filter 3 fetched emm data
2015/09/13 14:05:24 55503086 c      (emm) emm:
2015/09/13 14:05:24 55503086 c      (emm)   86 70 08 A9 FF 83 01 04 84 01 00 
2015/09/13 14:05:24 55503086 c   (reader) skylink [cryptoworks] EMM: reader 0D96 match since emmpid has no provid -> SEND!
2015/09/13 14:05:24 55503086 c   (reader) skylink [cryptoworks] EMM: Entered cryptoworks_get_emm_type ep->emm[0]=86
2015/09/13 14:05:24 55503086 c   (reader) skylink [cryptoworks] EMM: SHARED (Header)
2015/09/13 14:05:24 55503086 c   (reader) skylink [cryptoworks] EMM: shared emm (EMM-SB)
2015/09/13 14:05:24 00000000       (work) start reader thread action 13
2015/09/13 14:05:24 00000000       (main) starting thread client work
2015/09/13 14:05:24 00000000       (main) client work thread started
2015/09/13 14:05:24 5A940EA6 r     (work) data from add_job action=13 client r skylink
2015/09/13 14:05:24 00000000       (main) starting thread client work
2015/09/13 14:05:24 00000000       (main) client work thread started
2015/09/13 14:05:24 5A940EA6 r   (reader) skylink [cryptoworks] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/09/13 14:05:24 5A940EA6 r   (reader)   BF 0D F0 74 89 
2015/09/13 14:05:24 5A940EA6 r   (reader) skylink [cryptoworks] IO: Write timeout 496 us, write delay 0 us, to send 53 char(s), chunksize 53 char(s)
2015/09/13 14:05:24 5A940EA6 r   (reader) skylink [cryptoworks] IO: Sending:
2015/09/13 14:05:24 5A940EA6 r   (reader)   00 00 32 83 01 10 C0 23 98 00 20 D4 E0 BA 81 4A 
2015/09/13 14:05:24 5A940EA6 r   (reader)   58 AF 56 22 09 0D 6C 41 55 DF 60 B7 38 8C D6 92 
2015/09/13 14:05:24 5A940EA6 r   (reader)   50 EB 4E 7D DD DB 8F 33 75 FA 0A DF 08 B0 61 60 
2015/09/13 14:05:24 5A940EA6 r   (reader)   BF 0D F0 74 89 
2015/09/13 14:05:24 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:24 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:24 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:24 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:24 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:24 5A940EA6 r   (reader)   90 
2015/09/13 14:05:24 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:24 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW1: 90
2015/09/13 14:05:24 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:24 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:24 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:24 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:24 5A940EA6 r   (reader)   00 
2015/09/13 14:05:24 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:24 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW2: 00
2015/09/13 14:05:24 5A940EA6 r   (reader) skylink [cryptoworks] Answer from cardreader:
2015/09/13 14:05:24 5A940EA6 r   (reader)   90 00 
2015/09/13 14:05:25 55503086 c   (dvbapi) New events occurred on 1 of 7 handlers after 500 ms inactivity
2015/09/13 14:05:25 55503086 c   (dvbapi) Now handling fd 8 that reported event 3
2015/09/13 14:05:25 55503086 c   (dvbapi) Received:
2015/09/13 14:05:25 55503086 c   (dvbapi)   86 70 08 A9 FF 83 01 04 84 01 00 
2015/09/13 14:05:25 55503086 c   (dvbapi) Demuxer 0 Filter 3 fetched emm data
2015/09/13 14:05:25 55503086 c      (emm) emm:
2015/09/13 14:05:25 55503086 c      (emm)   86 70 08 A9 FF 83 01 04 84 01 00 
2015/09/13 14:05:25 55503086 c   (reader) skylink [cryptoworks] EMM: reader 0D96 match since emmpid has no provid -> SEND!
2015/09/13 14:05:25 55503086 c   (reader) skylink [cryptoworks] EMM: Entered cryptoworks_get_emm_type ep->emm[0]=86
2015/09/13 14:05:25 55503086 c   (reader) skylink [cryptoworks] EMM: SHARED (Header)
2015/09/13 14:05:25 55503086 c   (reader) skylink [cryptoworks] EMM: shared emm (EMM-SB)
2015/09/13 14:05:25 00000000       (work) start reader thread action 13
2015/09/13 14:05:25 00000000       (main) starting thread client work
2015/09/13 14:05:25 00000000       (main) client work thread started
2015/09/13 14:05:25 5A940EA6 r     (work) data from add_job action=13 client r skylink
2015/09/13 14:05:25 00000000       (main) starting thread client work
2015/09/13 14:05:25 00000000       (main) client work thread started
2015/09/13 14:05:25 5A940EA6 r   (reader) skylink [cryptoworks] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:26 5A940EA6 r   (reader)   44 
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 12 ETU (496 us)
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit size 70 bytes, expected len 2 bytes, delay 0 us, timeout=496 us
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit:
2015/09/13 14:05:26 5A940EA6 r   (reader)   00 00 43 83 01 0C C0 34 90 00 31 DC F3 F3 72 24 
2015/09/13 14:05:26 5A940EA6 r   (reader)   B9 C4 AE 8A BA 12 0F D3 C0 49 E2 F1 7A 95 16 B9 
2015/09/13 14:05:26 5A940EA6 r   (reader)   D8 13 8F DC 43 90 43 67 CB 31 84 7D 01 E8 D7 62 
2015/09/13 14:05:26 5A940EA6 r   (reader)   3A 79 9B 83 78 2C 39 31 E5 EA 4D 6E DF 08 25 3C 
2015/09/13 14:05:26 5A940EA6 r   (reader)   E3 68 08 2C 06 4E 
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IO: Write timeout 496 us, write delay 0 us, to send 70 char(s), chunksize 70 char(s)
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IO: Sending:
2015/09/13 14:05:26 5A940EA6 r   (reader)   00 00 43 83 01 0C C0 34 90 00 31 DC F3 F3 72 24 
2015/09/13 14:05:26 5A940EA6 r   (reader)   B9 C4 AE 8A BA 12 0F D3 C0 49 E2 F1 7A 95 16 B9 
2015/09/13 14:05:26 5A940EA6 r   (reader)   D8 13 8F DC 43 90 43 67 CB 31 84 7D 01 E8 D7 62 
2015/09/13 14:05:26 5A940EA6 r   (reader)   3A 79 9B 83 78 2C 39 31 E5 EA 4D 6E DF 08 25 3C 
2015/09/13 14:05:26 5A940EA6 r   (reader)   E3 68 08 2C 06 4E 
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:26 5A940EA6 r   (reader)   90 
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW1: 90
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:26 5A940EA6 r   (reader)   00 
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW2: 00
2015/09/13 14:05:26 5A940EA6 r   (reader) skylink [cryptoworks] Answer from cardreader:
2015/09/13 14:05:26 5A940EA6 r   (reader)   90 00 
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:27 5A940EA6 r   (reader)   44 
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 12 ETU (496 us)
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit size 70 bytes, expected len 2 bytes, delay 0 us, timeout=496 us
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit:
2015/09/13 14:05:27 5A940EA6 r   (reader)   00 00 43 83 01 08 C0 34 88 00 31 28 33 67 25 D1 
2015/09/13 14:05:27 5A940EA6 r   (reader)   8A 09 9D E5 B6 FA 23 D6 81 57 57 F7 95 E0 DE A2 
2015/09/13 14:05:27 5A940EA6 r   (reader)   E0 67 39 20 14 9F 85 30 55 3B 23 46 10 6A 67 14 
2015/09/13 14:05:27 5A940EA6 r   (reader)   33 83 DB CB 94 D4 CB CE 65 00 C1 BB DF 08 60 81 
2015/09/13 14:05:27 5A940EA6 r   (reader)   B8 AF 81 54 31 7B 
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IO: Write timeout 496 us, write delay 0 us, to send 70 char(s), chunksize 70 char(s)
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IO: Sending:
2015/09/13 14:05:27 5A940EA6 r   (reader)   00 00 43 83 01 08 C0 34 88 00 31 28 33 67 25 D1 
2015/09/13 14:05:27 5A940EA6 r   (reader)   8A 09 9D E5 B6 FA 23 D6 81 57 57 F7 95 E0 DE A2 
2015/09/13 14:05:27 5A940EA6 r   (reader)   E0 67 39 20 14 9F 85 30 55 3B 23 46 10 6A 67 14 
2015/09/13 14:05:27 5A940EA6 r   (reader)   33 83 DB CB 94 D4 CB CE 65 00 C1 BB DF 08 60 81 
2015/09/13 14:05:27 5A940EA6 r   (reader)   B8 AF 81 54 31 7B 
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:27 5A940EA6 r   (reader)   90 
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW1: 90
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:27 5A940EA6 r   (reader)   00 
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW2: 00
2015/09/13 14:05:27 5A940EA6 r   (reader) skylink [cryptoworks] Answer from cardreader:
2015/09/13 14:05:27 5A940EA6 r   (reader)   90 00 
2015/09/13 14:05:28 651913A2 h    (webif) WebIf: Origin checked. Result: access from 10.0.0.10 => allowed
2015/09/13 14:05:28 00000000       (work) start reader thread action 13
2015/09/13 14:05:28 00000000       (main) starting thread client work
2015/09/13 14:05:28 00000000       (main) client work thread started
2015/09/13 14:05:28 5A940EA6 r     (work) data from add_job action=13 client r skylink
2015/09/13 14:05:28 55503086 c   (dvbapi) New events occurred on 1 of 7 handlers after 604 ms inactivity
2015/09/13 14:05:28 55503086 c   (dvbapi) Now handling fd 8 that reported event 3
2015/09/13 14:05:28 55503086 c   (dvbapi) Received:
2015/09/13 14:05:28 55503086 c   (dvbapi)   86 70 08 A9 FF 83 01 04 84 01 00 
2015/09/13 14:05:28 55503086 c   (dvbapi) Demuxer 0 Filter 3 fetched emm data
2015/09/13 14:05:28 55503086 c      (emm) emm:
2015/09/13 14:05:28 55503086 c      (emm)   86 70 08 A9 FF 83 01 04 84 01 00 
2015/09/13 14:05:28 55503086 c   (reader) skylink [cryptoworks] EMM: reader 0D96 match since emmpid has no provid -> SEND!
2015/09/13 14:05:28 55503086 c   (reader) skylink [cryptoworks] EMM: Entered cryptoworks_get_emm_type ep->emm[0]=86
2015/09/13 14:05:28 55503086 c   (reader) skylink [cryptoworks] EMM: SHARED (Header)
2015/09/13 14:05:28 55503086 c   (reader) skylink [cryptoworks] EMM: shared emm (EMM-SB)
2015/09/13 14:05:28 00000000       (main) starting thread client work
2015/09/13 14:05:28 00000000       (main) client work thread started
2015/09/13 14:05:28 5A940EA6 r   (reader) skylink [cryptoworks] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/09/13 14:05:29 00000000       (work) start reader thread action 13
2015/09/13 14:05:29 00000000       (main) starting thread client work
2015/09/13 14:05:29 00000000       (main) client work thread started
2015/09/13 14:05:29 5A940EA6 r     (work) data from add_job action=13 client r skylink
2015/09/13 14:05:29 00000000       (main) starting thread client work
2015/09/13 14:05:29 00000000       (main) client work thread started
2015/09/13 14:05:29 5A940EA6 r   (reader) skylink [cryptoworks] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:30 5A940EA6 r   (reader)   44 
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 12 ETU (496 us)
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit size 70 bytes, expected len 2 bytes, delay 0 us, timeout=496 us
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit:
2015/09/13 14:05:30 5A940EA6 r   (reader)   00 00 43 83 01 10 C0 34 98 00 31 C8 F4 EF DD 6A 
2015/09/13 14:05:30 5A940EA6 r   (reader)   82 6C 84 EE DF 6A E1 55 72 11 AB B5 B2 AA 8E B4 
2015/09/13 14:05:30 5A940EA6 r   (reader)   A8 72 F7 82 B3 53 F6 9E A7 9F 20 7F 36 48 1B 11 
2015/09/13 14:05:30 5A940EA6 r   (reader)   D7 01 00 88 D8 37 90 03 41 B4 45 F0 DF 08 F1 25 
2015/09/13 14:05:30 5A940EA6 r   (reader)   CF 95 C5 13 0F 33 
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IO: Write timeout 496 us, write delay 0 us, to send 70 char(s), chunksize 70 char(s)
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IO: Sending:
2015/09/13 14:05:30 5A940EA6 r   (reader)   00 00 43 83 01 10 C0 34 98 00 31 C8 F4 EF DD 6A 
2015/09/13 14:05:30 5A940EA6 r   (reader)   82 6C 84 EE DF 6A E1 55 72 11 AB B5 B2 AA 8E B4 
2015/09/13 14:05:30 5A940EA6 r   (reader)   A8 72 F7 82 B3 53 F6 9E A7 9F 20 7F 36 48 1B 11 
2015/09/13 14:05:30 5A940EA6 r   (reader)   D7 01 00 88 D8 37 90 03 41 B4 45 F0 DF 08 F1 25 
2015/09/13 14:05:30 5A940EA6 r   (reader)   CF 95 C5 13 0F 33 
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:30 5A940EA6 r   (reader)   90 
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW1: 90
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:30 5A940EA6 r   (reader)   00 
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW2: 00
2015/09/13 14:05:30 5A940EA6 r   (reader) skylink [cryptoworks] Answer from cardreader:
2015/09/13 14:05:30 5A940EA6 r   (reader)   90 00 
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 12 ETU (496 us)
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit size 53 bytes, expected len 2 bytes, delay 0 us, timeout=496 us
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit:
2015/09/13 14:05:31 5A940EA6 r   (reader)   00 00 32 83 01 1C C0 23 B0 00 20 71 50 13 C4 6A 
2015/09/13 14:05:31 5A940EA6 r   (reader)   09 83 6B 47 B3 9A E5 D5 C0 85 40 A4 87 DA A5 92 
2015/09/13 14:05:31 5A940EA6 r   (reader)   93 0E 11 D2 95 65 F0 A9 29 E0 42 DF 08 C3 E8 6A 
2015/09/13 14:05:31 5A940EA6 r   (reader)   C3 F0 2A B4 A7 
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] IO: Write timeout 496 us, write delay 0 us, to send 53 char(s), chunksize 53 char(s)
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] IO: Sending:
2015/09/13 14:05:31 5A940EA6 r   (reader)   00 00 32 83 01 1C C0 23 B0 00 20 71 50 13 C4 6A 
2015/09/13 14:05:31 5A940EA6 r   (reader)   09 83 6B 47 B3 9A E5 D5 C0 85 40 A4 87 DA A5 92 
2015/09/13 14:05:31 5A940EA6 r   (reader)   93 0E 11 D2 95 65 F0 A9 29 E0 42 DF 08 C3 E8 6A 
2015/09/13 14:05:31 5A940EA6 r   (reader)   C3 F0 2A B4 A7 
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:31 5A940EA6 r   (reader)   90 
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW1: 90
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:31 5A940EA6 r   (reader)   00 
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW2: 00
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] Answer from cardreader:
2015/09/13 14:05:31 5A940EA6 r   (reader)   90 00 
2015/09/13 14:05:31 00000000       (work) start reader thread action 13
2015/09/13 14:05:31 00000000       (main) starting thread client work
2015/09/13 14:05:31 00000000       (main) client work thread started
2015/09/13 14:05:31 5A940EA6 r     (work) data from add_job action=13 client r skylink
2015/09/13 14:05:31 00000000       (main) starting thread client work
2015/09/13 14:05:31 00000000       (main) client work thread started
2015/09/13 14:05:31 5A940EA6 r   (reader) skylink [cryptoworks] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/09/13 14:05:31 00000000       (work) start client thread action 31
2015/09/13 14:05:31 00000000       (main) starting thread client work
2015/09/13 14:05:31 00000000       (main) client work thread started
2015/09/13 14:05:31 55503086 c     (work) data from add_job action=31 client c dvbapiau
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:32 5A940EA6 r   (reader)   44 
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 12 ETU (496 us)
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit size 70 bytes, expected len 2 bytes, delay 0 us, timeout=496 us
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit:
2015/09/13 14:05:32 5A940EA6 r   (reader)   00 00 43 83 01 08 C0 34 88 00 31 D9 59 F8 51 6A 
2015/09/13 14:05:32 5A940EA6 r   (reader)   F3 91 67 C0 9B 5E F1 C7 D3 20 9B C0 F2 67 BC AC 
2015/09/13 14:05:32 5A940EA6 r   (reader)   DD 5B BB 70 F3 C0 E2 FC B6 4E ED 8D 92 AF D9 25 
2015/09/13 14:05:32 5A940EA6 r   (reader)   1F 86 7B F8 7E 32 96 53 3B C3 5D 6D DF 08 E7 E1 
2015/09/13 14:05:32 5A940EA6 r   (reader)   FE 32 2E 94 71 BF 
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IO: Write timeout 496 us, write delay 0 us, to send 70 char(s), chunksize 70 char(s)
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IO: Sending:
2015/09/13 14:05:32 5A940EA6 r   (reader)   00 00 43 83 01 08 C0 34 88 00 31 D9 59 F8 51 6A 
2015/09/13 14:05:32 5A940EA6 r   (reader)   F3 91 67 C0 9B 5E F1 C7 D3 20 9B C0 F2 67 BC AC 
2015/09/13 14:05:32 5A940EA6 r   (reader)   DD 5B BB 70 F3 C0 E2 FC B6 4E ED 8D 92 AF D9 25 
2015/09/13 14:05:32 5A940EA6 r   (reader)   1F 86 7B F8 7E 32 96 53 3B C3 5D 6D DF 08 E7 E1 
2015/09/13 14:05:32 5A940EA6 r   (reader)   FE 32 2E 94 71 BF 
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:32 5A940EA6 r   (reader)   90 
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW1: 90
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:32 5A940EA6 r   (reader)   00 
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW2: 00
2015/09/13 14:05:32 5A940EA6 r   (reader) skylink [cryptoworks] Answer from cardreader:
2015/09/13 14:05:32 5A940EA6 r   (reader)   90 00 
2015/09/13 14:05:32 651913A2 h    (webif) WebIf: Received stale header from 10.0.0.10 (nonce=c27917684f9e372b05d71a73c1c02ee9, expectednonce=66e9559473ce122576c6a6f383fef8a0, opaque=381484120acf78f2e07de17fedf60ba1).
2015/09/13 14:05:32 651913A2 h    (webif) WebIf: Origin checked. Result: access from 10.0.0.10 => allowed
2015/09/13 14:05:33 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit:
2015/09/13 14:05:33 5A940EA6 r   (reader)   00 00 43 83 01 14 C0 34 A0 00 31 1B E8 A0 DA 22 
2015/09/13 14:05:33 5A940EA6 r   (reader)   4A 1A ED AC FA C6 2F A9 F2 9B 06 31 5F 57 55 60 
2015/09/13 14:05:33 5A940EA6 r   (reader)   EE 1C 4E C8 80 2B 3A CF 57 68 1C DE 73 B4 EA E3 
2015/09/13 14:05:33 5A940EA6 r   (reader)   35 7B B3 B5 AF 90 97 31 09 36 93 A4 DF 08 9D B8 
2015/09/13 14:05:33 5A940EA6 r   (reader)   EB 02 10 2A 27 C2 
2015/09/13 14:05:33 5A940EA6 r   (reader) skylink [cryptoworks] IO: Write timeout 496 us, write delay 0 us, to send 70 char(s), chunksize 70 char(s)
2015/09/13 14:05:33 5A940EA6 r   (reader) skylink [cryptoworks] IO: Sending:
2015/09/13 14:05:33 5A940EA6 r   (reader)   00 00 43 83 01 14 C0 34 A0 00 31 1B E8 A0 DA 22 
2015/09/13 14:05:33 5A940EA6 r   (reader)   4A 1A ED AC FA C6 2F A9 F2 9B 06 31 5F 57 55 60 
2015/09/13 14:05:33 5A940EA6 r   (reader)   EE 1C 4E C8 80 2B 3A CF 57 68 1C DE 73 B4 EA E3 
2015/09/13 14:05:33 5A940EA6 r   (reader)   35 7B B3 B5 AF 90 97 31 09 36 93 A4 DF 08 9D B8 
2015/09/13 14:05:33 5A940EA6 r   (reader)   EB 02 10 2A 27 C2 
2015/09/13 14:05:33 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:33 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:33 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:33 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:33 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:33 5A940EA6 r   (reader)   90 
2015/09/13 14:05:33 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:33 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW1: 90
2015/09/13 14:05:33 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:33 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:33 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:33 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:33 5A940EA6 r   (reader)   00 
2015/09/13 14:05:33 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:33 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW2: 00
2015/09/13 14:05:33 5A940EA6 r   (reader) skylink [cryptoworks] Answer from cardreader:
2015/09/13 14:05:33 5A940EA6 r   (reader)   90 00 
2015/09/13 14:05:34 55503086 c   (dvbapi) New events occurred on 1 of 7 handlers after 500 ms inactivity
2015/09/13 14:05:34 55503086 c   (dvbapi) Now handling fd 8 that reported event 3
2015/09/13 14:05:34 55503086 c   (dvbapi) Received:
2015/09/13 14:05:34 55503086 c   (dvbapi)   86 70 08 A9 FF 83 01 04 84 01 00 
2015/09/13 14:05:34 55503086 c   (dvbapi) Demuxer 0 Filter 3 fetched emm data
2015/09/13 14:05:34 55503086 c      (emm) emm:
2015/09/13 14:05:34 55503086 c      (emm)   86 70 08 A9 FF 83 01 04 84 01 00 
2015/09/13 14:05:34 55503086 c   (reader) skylink [cryptoworks] EMM: reader 0D96 match since emmpid has no provid -> SEND!
2015/09/13 14:05:34 55503086 c   (reader) skylink [cryptoworks] EMM: Entered cryptoworks_get_emm_type ep->emm[0]=86
2015/09/13 14:05:34 55503086 c   (reader) skylink [cryptoworks] EMM: SHARED (Header)
2015/09/13 14:05:34 55503086 c   (reader) skylink [cryptoworks] EMM: shared emm (EMM-SB)
2015/09/13 14:05:34 5A940EA6 r   (reader)   FA D1 C9 6D 8E 
2015/09/13 14:05:34 5A940EA6 r   (reader) skylink [cryptoworks] IO: Write timeout 496 us, write delay 0 us, to send 53 char(s), chunksize 53 char(s)
2015/09/13 14:05:34 5A940EA6 r   (reader) skylink [cryptoworks] IO: Sending:
2015/09/13 14:05:34 5A940EA6 r   (reader)   00 00 32 83 01 04 C0 23 80 00 20 58 8A 63 A6 5E 
2015/09/13 14:05:34 5A940EA6 r   (reader)   DD 1A 89 B8 91 CB 1B 98 D3 36 D7 C3 BB 56 39 BB 
2015/09/13 14:05:34 5A940EA6 r   (reader)   86 85 5C 5A 70 33 29 D0 4B B5 F0 DF 08 43 1C E0 
2015/09/13 14:05:34 5A940EA6 r   (reader)   FA D1 C9 6D 8E 
2015/09/13 14:05:34 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Transmit succesful
2015/09/13 14:05:34 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:34 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:34 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:34 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:34 5A940EA6 r   (reader)   90 
2015/09/13 14:05:34 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:34 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW1: 90
2015/09/13 14:05:34 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Setting timeout to 19200 ETU (793600 us)
2015/09/13 14:05:34 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive size 1 bytes, delay 0 us, timeout=793600 us
2015/09/13 14:05:34 5A940EA6 r   (reader) skylink [cryptoworks] IO: Read timeout 793600 us, read delay 0 us, to read 1 char(s), chunksize 1 char(s)
2015/09/13 14:05:34 5A940EA6 r   (reader) skylink [cryptoworks] IO: Receiving:
2015/09/13 14:05:34 5A940EA6 r   (reader)   00 
2015/09/13 14:05:34 5A940EA6 r   (reader) skylink [cryptoworks] IFD: Receive succesful
2015/09/13 14:05:34 5A940EA6 r   (reader) skylink [cryptoworks] TRACE: SW2: 00
2015/09/13 14:05:34 5A940EA6 r   (reader) skylink [cryptoworks] Answer from cardreader:
2015/09/13 14:05:34 5A940EA6 r   (reader)   90 00 
2015/09/13 14:05:35 55503086 c   (dvbapi) New events occurred on 1 of 7 handlers after 498 ms inactivity
2015/09/13 14:05:35 55503086 c   (dvbapi) Now handling fd 8 that reported event 3
2015/09/13 14:05:35 55503086 c   (dvbapi) Received:
2015/09/13 14:05:35 55503086 c   (dvbapi)   86 70 08 A9 FF 83 01 04 84 01 00 
2015/09/13 14:05:35 55503086 c   (dvbapi) Demuxer 0 Filter 3 fetched emm data
2015/09/13 14:05:35 55503086 c      (emm) emm:
2015/09/13 14:05:35 55503086 c      (emm)   86 70 08 A9 FF 83 01 04 84 01 00 
2015/09/13 14:05:35 55503086 c   (reader) skylink [cryptoworks] EMM: reader 0D96 match since emmpid has no provid -> SEND!
2015/09/13 14:05:35 55503086 c   (reader) skylink [cryptoworks] EMM: Entered cryptoworks_get_emm_type ep->emm[0]=86
2015/09/13 14:05:35 55503086 c   (reader) skylink [cryptoworks] EMM: SHARED (Header)
2015/09/13 14:05:35 55503086 c   (reader) skylink [cryptoworks] EMM: shared emm (EMM-SB)
2015/09/13 14:05:35 00000000       (work) start reader thread action 13
2015/09/13 14:05:35 00000000       (main) starting thread client work
2015/09/13 14:05:35 00000000       (main) client work thread started
2015/09/13 14:05:35 5A940EA6 r     (work) data from add_job action=13 client r skylink
2015/09/13 14:05:35 00000000       (main) starting thread client work
2015/09/13 14:05:35 00000000       (main) client work thread started
2015/09/13 14:05:35 5A940EA6 r   (reader) skylink [cryptoworks] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
Nemáte oprávnění prohlížet přiložené soubory.
11chloe
Expert fóra
Expert fóra
Příspěvky: 809
Registrován: 18.listopad 2014 - 18:03

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od 11chloe »

Na konfigách nic divného nevidím a ten log je celkem nečitelný. Nevím kde si ho vzal ale přes webif oscamu bych nastavil debug na 0. Používám OpenPLi na et4000 a problém nemám, takže bych zauvažoval v tvém případě o záloze nastavení a znova to flešnout. Třeba se to srovná.
Pokud chceš mít jistotu že neni něco co by oscamu v konfigách vadilo, tak stačí oscam spustit pouze s jedním konfigem (oscam.conf) a ostatní si doplnit přes webif oscamu.
Uživatelský avatar
Hypnos
Mírně pokročilý
Mírně pokročilý
Příspěvky: 76
Registrován: 17.duben 2007 - 22:33
Kontaktovat uživatele:

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od Hypnos »

Prave ze jsem zkousel cistou instalaci a jen oscam. A stejne po chvili prepinani tma.
Tamto byl log z oscamu ve verzi all.
v 0 neni nic videt ale dam to sem.

Kód: Vybrat vše

2015/09/13 18:51:36 55503086 c      (ecm) dvbapiau (0D96@000004/0000/1325/80:9CACB63A328017C2581309B08A05294C): found (114 ms) by skylink
2015/09/13 18:51:46 55503086 c      (ecm) dvbapiau (0D96@000004/0000/1325/80:1E88816D057C504F5E95F8F6BC000BD8): found (115 ms) by skylink
2015/09/13 18:51:56 55503086 c      (ecm) dvbapiau (0D96@000004/0000/1325/80:5374784405657F118EC172063439471E): found (112 ms) by skylink
2015/09/13 18:52:06 55503086 c      (ecm) dvbapiau (0D96@000004/0000/1325/80:ADE2C2772FE0164B17A1E2E35FB2313C): found (114 ms) by skylink
2015/09/13 18:52:16 55503086 c      (ecm) dvbapiau (0D96@000004/0000/1325/80:9D88206B8DFE983BF49C527E69766511): found (113 ms) by skylink
2015/09/13 18:52:26 55503086 c      (ecm) dvbapiau (0D96@000004/0000/1325/80:D05B4E1F23325986D8747FF10346D14B): found (114 ms) by skylink
2015/09/13 18:52:36 55503086 c      (ecm) dvbapiau (0D96@000004/0000/1325/80:DB3788BD65C740237616B59BE07B26FA): found (113 ms) by skylink
2015/09/13 18:52:46 55503086 c      (ecm) dvbapiau (0D96@000004/0000/1325/80:2CC90FF3012B6540250CC51945D181AB): found (114 ms) by skylink
2015/09/13 18:52:56 55503086 c      (ecm) dvbapiau (0D96@000004/0000/1325/80:192EFAC7F360D91DD125BE3AC4CA8753): found (115 ms) by skylink
Uživatelský avatar
Hypnos
Mírně pokročilý
Mírně pokročilý
Příspěvky: 76
Registrován: 17.duben 2007 - 22:33
Kontaktovat uživatele:

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od Hypnos »

Tak jsem tam nahral starsi img OpenPLi-4.0-beta-vusolo-20141102_usb a stejne konfigy. Prepinani je rychlejsi. Uvidim, jestli se to bude chovat stejne. Dam vedet. Pokud by nekoho neco napadlo, nebo mel stejny problem....
Uživatelský avatar
Hypnos
Mírně pokročilý
Mírně pokročilý
Příspěvky: 76
Registrován: 17.duben 2007 - 22:33
Kontaktovat uživatele:

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od Hypnos »

Problem byl v binarce, musel jsem pouzit starsi konkretne 10134.
Uživatelský avatar
pravyroxor
Mírně pokročilý
Mírně pokročilý
Příspěvky: 78
Registrován: 10.květen 2010 - 12:13
satelitni prijimac: VU+ Uno 4k SE, vu+ zero

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od pravyroxor »

Mal by som jeden technický otáznik ohľadne zdielania v LAN, už viem ako fungujú services a ako môžem userovi zakazať zoznam kanalov (napr. platenych) a povoliť mu napr. len zakladnu ponuku stv a pod. Čo mi ale vrta hlavou je otazka blokovania reshare zakladnej ponuky internetoveho readera v LAN, aby sa lokalne boxy nesnazili tahat zakladnu ponuku z internetu ale len z lokalnej ICE karty ! Lebo stalo sa mi ze z internetovej citacky si sosol vedlajsi box zakladnu ponuku rychlejsie ako z lokalnej karty a nerad by som dostal od poskytovatela ban. Vie niekto poradiť :?: Vďaka
gusto1
Znalec fóra
Znalec fóra
Příspěvky: 617
Registrován: 07.září 2011 - 22:32

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od gusto1 »

No sak ked vies ako funguju services, tak si to pories cez services
Uživatelský avatar
pravyroxor
Mírně pokročilý
Mírně pokročilý
Příspěvky: 78
Registrován: 10.květen 2010 - 12:13
satelitni prijimac: VU+ Uno 4k SE, vu+ zero

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od pravyroxor »

Aha uz mi napada jedno riesenie - vyblokovat zaklad na vonkajsom readerovi.
Uživatelský avatar
k.o.h.u.t.
Odborník
Odborník
Příspěvky: 397
Registrován: 03.květen 2009 - 17:26

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od k.o.h.u.t. »

pravyroxor píše:Mal by som jeden technický otáznik ohľadne zdielania v LAN, už viem ako fungujú services a ako môžem userovi zakazať zoznam kanalov (napr. platenych) a povoliť mu napr. len zakladnu ponuku stv a pod. Čo mi ale vrta hlavou je otazka blokovania reshare zakladnej ponuky internetoveho readera v LAN, aby sa lokalne boxy nesnazili tahat zakladnu ponuku z internetu ale len z lokalnej ICE karty ! Lebo stalo sa mi ze z internetovej citacky si sosol vedlajsi box zakladnu ponuku rychlejsie ako z lokalnej karty a nerad by som dostal od poskytovatela ban. Vie niekto poradiť :?: Vďaka
Proc by te mel nekdo banovat za to, ze se pripojujes na zakladni nabidku kdyz ti poskytuje neco "vic"?
OSCam umi defaultne preferovat lokalni karta. U pristroju s uzavrenym firmware nezmuzes nic.
----------------------------------------
Raspberry Pi 3 Model B 64-bit
Gigablue Trio UHD, openATV
VU+ ZERO 4K, openATV
HD-BOX Enibox, openATV
VU+ ZERO, openATV
Prismcube Ruby, Black Hole
Showbox 5000HD, openATV
AB IPBox 91/55/99/9900HD

----------------------------------------
dufoq3
Expert fóra
Expert fóra
Příspěvky: 752
Registrován: 03.březen 2012 - 20:44

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od dufoq3 »

predpokladam, ze mal na mysli nejaky zdroj z ruska a pod. Na serveri zakaz cez services zaklad pre tu vzdialenu citacku. Cize tak, aby zaklad citalo VYHRADNE LEN z karty a ostatne z tej vzdialenej citacky.
Vu+ Uno 4K SE [E2 - ATV], lcd4linux - SAMSUNG SPF-107H
auto update picons, ASUS router OSCam, enigma2 OSCam
Odpovědět

Zpět na „Oscam - multiprotokolárny kartový server“