Oscam a jeho nastavenie (s popisom - testovane v E2)

Oscam - rady, návody a postupy
Odpovědět
Uživatelský avatar
jany
Pokročilý
Pokročilý
Příspěvky: 131
Registrován: 12.listopad 2007 - 21:47
satelitni prijimac: IP Box200/250, SS1,SS2
Kontaktovat uživatele:
Kontaktovat uživatele jany

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od jany »

hej ale pre sh4 nie pre mips
pozri aj tu http://www.ab-forum.info/viewtopic.php?f=85&t=36223

IP Box 9000HD | E2 PKT 1.0.0 | Stab HH90 | LNB Strong Twin
IP Box 9900HD | E2 HD |
SS HD2 | SG2100 | DVBViewer | hadu
Ubuntu 12.04 | phoenix usb2x | oscam 1.20 build 83xx
SS2 rev 2.3 | SS1 rev 1.3 | uz nepouzivam
Network http://network.mysteria.cz/
Nahoru
spotter
Registrovaný
Registrovaný
Příspěvky: 2
Registrován: 08.říjen 2007 - 0:12

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od spotter »

Zdravim vsetkych uzivatelov, uz druhy den sa marne trapim s nastavenim zdielania. Ako server pouzivam Edison pingulux /obdoba dreamboxu/ bezi na nom oscam a ako klient Edison argus mini IP protokol newcamd. Neviem kde robim chybu.
------------------------------------------------------------------------
Skusal som rozne konfigy na server sa klientom pripojim ale zdielanie nejde. Ak by mi vedel niketo pomoct tak vopred velmi dakujem: moje konfigy su nasledujuce. Rovnako neviem ci je potrebne na beh zdielania mat zapnuty plugin mgcamd sucasne s oscam pluginom alebo staci ak mam zapnuty len plugin oscam.


oscam server:
---------------------------
#ICE karta
[reader]
enable = 1
Label = skylink ICE
Protocol = internal
Device = /dev/sci0
detect = CD
services = skylink
emmCache = 1,1,2
group = 1
CAID = 0D96
disableserverfilter = 1

oscam.conf
-----------------------------
[global]
logfile = /var/log/oscam.log
disableuserfile = 1
fallbacktimeout = 1500
clientmaxidle = 50
cachedelay = 120
nice = -1
maxlogsize = 20
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 30
lb_mode = 3
lb_nbest_readers = 10
lb_nfb_readers = 10
lb_min_ecmcount = 15
lb_max_ecmcount = 200
lb_reopen_seconds = 200
resolvegethostbyname = 1

[monitor]
port = 0
nocrypt =
aulow = 30
hideclient_to = 15
monlevel = 2
appendchaninfo = 0

[newcamd]
port = 15000@0D96:000004,000008
key = 0102030405060708091011121314
allowed =
keepalive = 1
mgclient = 0

[dvbapi]
enabled = 1
au = 0
boxtype = none
user = server
pmt_mode = 0
request_mode = 0

[webif]
httpport = 8888
httpuser = root
httppwd = root
httpcss = /var/tuxbox/config/blue.css
httprefresh = 10
httpallowed = 192.168.0.0-192.168.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

oscam.user
-------------------------------------------------
[account]
user = server
pwd = server
group = 1
betatunnel = 1833.FFFF:1702,1834.FFFF:1722


[account]
user = sat2
pwd = sat2
group = 1
betatunnel = 1833.FFFF:1702,1834.FFFF:1722

moj log je nasledujuci:
-------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jan 1 00:00:48 2000
-------------------------------------------------------------------------------
2000/01/01 0:00:48 29723000 s >> OSCam << cardserver started version 1.00-unstable_svn, build #4882 (sh4-linux)
2000/01/01 0:00:48 29723000 s version=1.00-unstable_svn, build #4882, system=sh4-linux-, nice=-1
2000/01/01 0:00:48 29723000 s client max. idle=50 sec, debug level=0
2000/01/01 0:00:48 29723000 s max. logsize=20 Kb
2000/01/01 0:00:48 29723000 s client timeout=5000 ms, fallback timeout=1500 ms, cache delay=120 ms
2000/01/01 0:00:48 29723000 s auth size=4992
2000/01/01 0:00:48 29723000 s Cannot open file "/var/tuxbox/config/oscam.services" (errno=2)
2000/01/01 0:00:48 29723000 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2000/01/01 0:00:48 29723000 s signal handling initialized (type=sysv)
2000/01/01 0:00:48 29723000 s can't open file "/var/tuxbox/config/oscam.srvid" (err=2), no service-id's loaded
2000/01/01 0:00:48 29723000 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2000/01/01 0:00:48 29723000 s can't open file "/var/tuxbox/config/oscam.provid" (err=2), no provids's loaded
2000/01/01 0:00:48 29723000 s monitor: disabled
2000/01/01 0:00:48 29723000 s camd33: disabled
2000/01/01 0:00:48 29723000 s camd35: disabled
2000/01/01 0:00:48 29723000 s cs378x: disabled
2000/01/01 0:00:48 29723000 s newcamd: initialized (fd=13, port=15000, crypted)
2000/01/01 0:00:48 29723000 s CAID: 0D96
2000/01/01 0:00:48 29723000 s provid #0: 000004
2000/01/01 0:00:48 29723000 s provid #1: 000008
2000/01/01 0:00:48 29723000 s cccam: disabled
2000/01/01 0:00:48 29723000 s radegast: disabled
2000/01/01 0:00:48 29723000 s http thread started
2000/01/01 0:00:48 29723000 s creating thread for device /dev/sci0
2000/01/01 0:00:48 29723000 s loadbalancer: can't read from file /tmp/.oscam/stat
2000/01/01 0:00:48 29723000 s waiting for local card init
2000/01/01 0:00:48 2A73C4E8 h HTTP Server listening on port 8888
2000/01/01 0:00:48 2AF3C4E8 r reader thread started (thread=2AF3C4E8, label=dolní_ice, device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2000/01/01 0:00:48 2AF3C4E8 r dolní_ice card detected
2000/01/01 0:00:48 2AF3C4E8 r Error activating card.
2000/01/01 0:00:49 2AF3C4E8 r Error activating card.
2000/01/01 0:00:49 2AF3C4E8 r Error activating card.
2000/01/01 0:00:50 2AF3C4E8 r card initializing error
2000/01/01 0:00:50 29723000 s init for all local cards done
2000/01/01 0:00:50 2B73C4E8 c plain dvbapi-client granted (server, au=off)
2000/01/01 0:00:50 2B73C4E8 c dvbapi: 1 entries read from oscam.dvbapi
2000/01/01 0:00:51 2BF3C4E8 c client connected to 15000 port
2000/01/01 0:00:51 2BF3C4E8 c encrypted newcamd:15000-client 192.168.1.5 granted (sat2, au=off)
2000/01/01 0:00:51 2BF3C4E8 c user sat2 authenticated successfully (generic)
2000/01/01 0:00:51 2BF3C4E8 c AU disabled for user sat2
2000/01/01 0:00:51 2BF3C4E8 c sat2 (0D96&000004/1F42/80:FEF2): rejected group (153 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:00:52 2B73C4E8 c dvbapi: [ADD PID 0] CAID: 0D03 ECM_PID: 00C9 PROVID: 000000
2000/01/01 0:00:52 2B73C4E8 c dvbapi: [ADD PID 1] CAID: 0D70 ECM_PID: 00D3 PROVID: 000000
2000/01/01 0:00:52 2B73C4E8 c dvbapi: [ADD PID 2] CAID: 0D0F ECM_PID: 00DD PROVID: 000000
2000/01/01 0:00:52 2B73C4E8 c dvbapi: [ADD PID 3] CAID: 0D96 ECM_PID: 00E7 PROVID: 000000
2000/01/01 0:00:52 2B73C4E8 c dvbapi: [ADD PID 4] CAID: 0624 ECM_PID: 00F1 PROVID: 000000
2000/01/01 0:00:52 2B73C4E8 c dvbapi: [ADD PID 5] CAID: 0666 ECM_PID: 0489 PROVID: 000000
2000/01/01 0:00:52 2B73C4E8 c dvbapi: new program number: 1F41 (0D03:1F41 unknown)
2000/01/01 0:00:53 2B73C4E8 c dvbapi: Start descrambling PID #3 (CAID: 0D96) 1
2000/01/01 0:00:53 2B73C4E8 c server (0D96&000004/1F41/80:7505): rejected group (121 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:00:53 2B73C4E8 c server (0D96&000004/1F41/80:94A7): rejected group (121 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:00:58 2BF3C4E8 c sat2 (0D96&000004/1F42/80:3B40): rejected group (121 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:01:13 2BF3C4E8 c sat2 (0D96&000004/1F42/80:C29F): rejected group (122 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:01:14 2B73C4E8 c server (0D96&000004/1F41/80:4625): rejected group (122 ms) (of 0 avail 0) (no matching reader)
2000/01/01 0:01:28 2BF3C4E8 c sat2 (0D96&000004/1F42/80:DA02): rejected group (121 ms) (of 0 avail 0) (no matching reader)
Nemáte oprávnění prohlížet přiložené soubory.
Nahoru
drto
Pokročilý
Pokročilý
Příspěvky: 212
Registrován: 16.září 2010 - 14:51

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od drto »

to spotter:
v prvom rade ti vobec nenacita kartu tak preto ti nejde zdielacka. ved vidis v oscame ze ti pise error pri karte. skus to s tymito configmi :wink:

oscam server:
---------------------------
#ICE karta
[reader]
enable = 1
Label = skylink ICE
Protocol = internal
Device = /dev/sci0
detect = CD
#services = skylink
emmCache = 1,3,2
mhz = 357
cardmhz = 357
group = 1
CAID = 0D96


oscam.conf
-----------------------------
[global]
logfile = /var/log/oscam.log
disableuserfile = 1
fallbacktimeout = 1500
clientmaxidle = 50
cachedelay = 120
nice = -1
maxlogsize = 20
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 30
lb_mode = 3
lb_nbest_readers = 10
lb_nfb_readers = 10
lb_min_ecmcount = 15
lb_max_ecmcount = 200
lb_reopen_seconds = 200
resolvegethostbyname = 1

[monitor]
port = 0
nocrypt =
aulow = 30
hideclient_to = 15
monlevel = 2
appendchaninfo = 0

[newcamd]
port = 15000@0D96:000004,000008
key = 0102030405060708091011121314
allowed =
keepalive = 1
mgclient = 0

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = user
#pmt_mode = 0


[webif]
httpport = 8888
httpuser = root
httppwd = root
httpcss = /var/tuxbox/config/blue.css
httprefresh = 10
httpallowed = 192.168.0.0-192.168.255.255

oscam.user
-------------------------------------------------
[account]
user = user
pwd = user
group = 1
caid = 0D96


[account]
user = sat2
pwd = sat2
group = 1
caid = 0D96
DM800HD klon - Image OpenPLI
13E + 19,2E + 23,5E + 28,2E
Amiko Alien SHD 8900 (uz je posunuty svokrovi) - PKT GM990 E2 NEBULA v3 - Skin: Silver HD
Oscam 6241
Nahoru
termix
Registrovaný
Registrovaný
Příspěvky: 2
Registrován: 14.červenec 2011 - 20:31

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od termix »

Ahojte,
skusam rozbehat Skylink ICE cez Oscam na 9900HD. Vyzera byt vsetko OK, no stale ziadny obraz.

Karta je uplne nova, tak neviem ci to nie je tym. Karta som uz zaregistroval.

Edit: Vsimol som si v logu ze je tam error activating card...co to znamena?

Konfigy su:

oscam.conf

[global]
pidfile = /tmp/oscam.pid
usrfile = /tmp/oscamuser.log
logfile = /tmp/oscam.log
disablelog = 0
disableuserfile = 0
usrfileflag = 0
clienttimeout = 3000
fallbacktimeout = 2500
clientmaxidle = 120
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 10000
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
readerautoloadbalance = 0
readerautoloadbalance_save = 0
resolvegethostbyname = 0

[dvbapi]
enabled = 1
au = 1
boxtype = ufs910
user = dummy

[webif]
httpport = 8888
httpuser = root
httppwd = oscam
httprefresh = 0
httpallowed = 192.168.0.1-192.168.255.255
httphideidleclients = 0
httpreadonly = 0


[newcamd]
Key = 0102030405060708091011121314
Port = 11000@0d96:000004;12000@0d03:000004,000008;13000@0d02:0000a0;14000@0d0f:000004,000008;15000@0d70:000004,000008
keepalive = 1
mgclient = 0

[cccam]
port = 40000
version = 2.1.2

oscam.server

[reader]
Label = skylink_ice
Protocol = internal
Device = /dev/sci0
group = 1
enable = 1
caid = 0D96
services = skylink_ice

[reader]
Label = upper
Protocol = internal
Device = /dev/sci1
group = 1
enable = 0

[reader]
Label = smartgo
Protocol = mouse
Device = /dev/ttyUSB0
group = 1
enable = 0

[reader]
Label = cccam_server
Protocol = cccam
Device = 192.168.1.10,40000
account = login,password
group = 1
enable = 0

[reader]
Label = newcamd_server
Protocol = newcamd
Device = 192.168.0.2,66666
account = login1,password1
group = 1
enable = 0
key = 0102030405060708091011121314

oscam.user

[account]
user = dummy
pwd = dummy
group = 1
uniq = 1
au = 1
caid = 0D96
services = skylink_ice
betatunnel = 1833.FFFF:1702

[account]
user = local
pwd = up
group = 1
uniq = 1
au = 1
betatunnel = 1833.FFFF:1702

[account]
user = local
pwd = down
group = 1
uniq = 1
au = 1
betatunnel = 1833.FFFF:1702

oscam.dvbapi

P: 0D96 1
I: 0D03
I: 0D0F
I: 0D02

oscam.log


-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sun Sep 4 10:51:11 2011
-------------------------------------------------------------------------------
2011/09/04 10:51:11 296A3000 s >> OSCam << cardserver started version 1.00-unstable_svn, build #4743 (sh4-amino-linux)
2011/09/04 10:51:11 296A3000 s version=1.00-unstable_svn, build #4743, system=sh4-amino-linux, nice=-1
2011/09/04 10:51:11 296A3000 s client max. idle=120 sec, debug level=0
2011/09/04 10:51:11 296A3000 s max. logsize=10000 Kb
2011/09/04 10:51:11 296A3000 s client timeout=3000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/09/04 10:51:11 296A3000 s auth size=4972
2011/09/04 10:51:11 296A3000 s services reloaded: 0 services freed, 26 services loaded
2011/09/04 10:51:11 296A3000 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2011/09/04 10:51:11 296A3000 s signal handling initialized (type=sysv)
2011/09/04 10:51:11 296A3000 s 1338 service-id's loaded
2011/09/04 10:51:11 296A3000 s can't open file "/var/keys/oscam.tiers" (err=2), no tier-id's loaded
2011/09/04 10:51:11 296A3000 s 387 provid's loaded
2011/09/04 10:51:11 296A3000 s can't open file "/var/keys/oscam.ird" (errno=2) irdeto guessing not loaded
2011/09/04 10:51:11 296A3000 s monitor: disabled
2011/09/04 10:51:11 296A3000 s camd33: disabled
2011/09/04 10:51:11 296A3000 s camd35: disabled
2011/09/04 10:51:11 296A3000 s cs378x: disabled
2011/09/04 10:51:11 296A3000 s newcamd: initialized (fd=9, port=11000, crypted)
2011/09/04 10:51:11 296A3000 s CAID: 0D96
2011/09/04 10:51:11 296A3000 s provid #0: 000004
2011/09/04 10:51:11 296A3000 s newcamd: initialized (fd=10, port=12000, crypted)
2011/09/04 10:51:11 296A3000 s CAID: 0D03
2011/09/04 10:51:11 296A3000 s provid #0: 000004
2011/09/04 10:51:11 296A3000 s provid #1: 000008
2011/09/04 10:51:11 296A3000 s newcamd: initialized (fd=11, port=13000, crypted)
2011/09/04 10:51:11 296A3000 s CAID: 0D02
2011/09/04 10:51:11 296A3000 s provid #0: 0000A0
2011/09/04 10:51:11 296A3000 s newcamd: initialized (fd=12, port=14000, crypted)
2011/09/04 10:51:11 296A3000 s CAID: 0D0F
2011/09/04 10:51:11 296A3000 s provid #0: 000004
2011/09/04 10:51:11 296A3000 s provid #1: 000008
2011/09/04 10:51:11 296A3000 s newcamd: initialized (fd=13, port=15000, crypted)
2011/09/04 10:51:11 296A3000 s CAID: 0D70
2011/09/04 10:51:11 296A3000 s provid #0: 000004
2011/09/04 10:51:11 296A3000 s provid #1: 000008
2011/09/04 10:51:11 296A3000 s cccam: initialized (fd=14, port=40000, crypted)
2011/09/04 10:51:11 296A3000 s radegast: disabled
2011/09/04 10:51:11 2A6BC4E8 h HTTP Server listening on port 8888
2011/09/04 10:51:11 296A3000 s http thread started
2011/09/04 10:51:11 296A3000 s creating thread for device /dev/sci0
2011/09/04 10:51:11 2AEBC4E8 r reader thread started (thread=2AEBC4E8, label=skylink_ice, device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2011/09/04 10:51:11 296A3000 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/09/04 10:51:11 296A3000 s waiting for local card init
2011/09/04 10:51:11 2AEBC4E8 r skylink_ice card detected
2011/09/04 10:51:17 2AEBC4E8 r Error activating card.
2011/09/04 10:51:20 2AEBC4E8 r ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2011/09/04 10:51:23 2AEBC4E8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2011/09/04 10:51:24 2AEBC4E8 r [cryptoworks-reader] card detected
2011/09/04 10:51:24 2AEBC4E8 r [cryptoworks-reader] type: CryptoWorks
2011/09/04 10:51:24 2AEBC4E8 r type: CryptoWorks, caid: 0D96, ascii serial: 269300913, hex serial: 00100D34B1
2011/09/04 10:51:24 2AEBC4E8 r issuer: CryptoWorks, id: 04, bios: v3, pin: unknown, mfid: 3F00
2011/09/04 10:51:24 2AEBC4E8 r providers: 4 (04,08,0C,10)
2011/09/04 10:51:24 2AEBC4E8 r found cardsystem cryptoworks
2011/09/04 10:51:24 2AEBC4E8 r provider: 1, id: 04, name: Operator: FFFF
2011/09/04 10:51:24 2AEBC4E8 r chid: 1389, date: 2011/09/04 - 2011/09/24, name: Product 1389
2011/09/04 10:51:24 2AEBC4E8 r chid: 138A, date: 2011/09/04 - 2011/09/24, name: Product 138A
2011/09/04 10:51:24 2AEBC4E8 r chid: 138B, date: 2011/09/04 - 2011/09/24, name: Product 138B
2011/09/04 10:51:24 2AEBC4E8 r chid: 03E9, date: 2011/09/04 - 2011/10/04, name: Product 03E9
2011/09/04 10:51:24 2AEBC4E8 r chid: 03EA, date: 2011/09/04 - 2011/10/04, name: Product 03EA
2011/09/04 10:51:24 2AEBC4E8 r chid: 03EB, date: 2011/09/04 - 2011/10/04, name: Product 03EB
2011/09/04 10:51:24 2AEBC4E8 r chid: 03EC, date: 2011/09/04 - 2011/10/04, name: Product 03EC
2011/09/04 10:51:24 2AEBC4E8 r chid: 03ED, date: 2011/09/04 - 2011/10/04, name: Product 03ED
2011/09/04 10:51:24 2AEBC4E8 r chid: 1772, date: 2011/09/04 - 2011/10/04, name: Product 1772
2011/09/04 10:51:25 2AEBC4E8 r chid: 07D1, date: 2011/09/04 - 2011/10/04, name: Product 07D1
2011/09/04 10:51:25 2AEBC4E8 r chid: 07D2, date: 2011/09/04 - 2011/10/04, name: Product 07D2
2011/09/04 10:51:25 2AEBC4E8 r chid: 07D3, date: 2011/09/04 - 2011/10/04, name: Product 07D3
2011/09/04 10:51:25 2AEBC4E8 r chid: 07D4, date: 2011/09/04 - 2011/10/04, name: Product 07D4
2011/09/04 10:51:25 2AEBC4E8 r chid: 07D6, date: 2011/09/04 - 2011/10/04, name: Product 07D6
2011/09/04 10:51:25 2AEBC4E8 r chid: 07DB, date: 2011/09/04 - 2011/10/04, name: Product 07DB
2011/09/04 10:51:25 2AEBC4E8 r chid: 0BB9, date: 2011/09/04 - 2011/10/04, name: Product 0BB9
2011/09/04 10:51:25 2AEBC4E8 r chid: 0BBA, date: 2011/09/04 - 2011/10/04, name: Product 0BBA
2011/09/04 10:51:25 2AEBC4E8 r chid: 0BBC, date: 2011/09/04 - 2011/09/14, name: Product 0BBC
2011/09/04 10:51:25 2AEBC4E8 r chid: 07D5, date: 2011/09/04 - 2011/10/04, name: Product 07D5
2011/09/04 10:51:25 2AEBC4E8 r chid: 0BBB, date: 2011/09/04 - 2011/10/04, name: Product 0BBB
2011/09/04 10:51:25 2AEBC4E8 r chid: 07D8, date: 2011/09/04 - 2011/10/04, name: Product 07D8
2011/09/04 10:51:25 2AEBC4E8 r provider: 2, id: 08, name: Operator: FFFF
2011/09/04 10:51:25 2AEBC4E8 r provider: 3, id: 0C, name: Operator: FFFF
2011/09/04 10:51:25 2AEBC4E8 r provider: 4, id: 10, name: Operator: FFFF
2011/09/04 10:51:25 2AEBC4E8 r [cryptoworks-reader] ready for requests
2011/09/04 10:51:25 296A3000 s init for all local cards done
2011/09/04 10:51:25 296A3000 s anti cascading disabled
2011/09/04 10:51:25 2B6BC4E8 c plain dvbapi-client granted (dummy, au=auto (5 reader))
2011/09/04 10:51:25 2B6BC4E8 c dvbapi: 4 entries read from oscam.dvbapi
2011/09/04 10:51:25 2B6BC4E8 c dvbapi: found pmt file /tmp/pmt.tmp
2011/09/04 10:51:25 2B6BC4E8 c dvbapi: found pmt file /tmp/pmt.tmp
2011/09/04 10:51:25 2B6BC4E8 c dvbapi: found pmt file /tmp/pmt.tmp
2011/09/04 10:51:25 2B6BC4E8 c dvbapi: [ADD PID 0] CAID: 0D70 ECM_PID: 008C PROVID: 000000
2011/09/04 10:51:25 2B6BC4E8 c dvbapi: [ADD PID 1] CAID: 0D03 ECM_PID: 00AA PROVID: 000000
2011/09/04 10:51:25 2B6BC4E8 c dvbapi: [ADD PID 2] CAID: 0D0F ECM_PID: 00BE PROVID: 000000
2011/09/04 10:51:25 2B6BC4E8 c dvbapi: [ADD PID 3] CAID: 0624 ECM_PID: 00F0 PROVID: 000000
2011/09/04 10:51:25 2B6BC4E8 c dvbapi: [ADD PID 4] CAID: 0D96 ECM_PID: 0104 PROVID: 000000
2011/09/04 10:51:25 2B6BC4E8 c dvbapi: [ADD PID 5] CAID: 0666 ECM_PID: 0B18 PROVID: 000000
2011/09/04 10:51:25 2B6BC4E8 c dvbapi: new program number: 13A6 (JOJ)
2011/09/04 10:51:25 2B6BC4E8 c dvbapi: [ADD PID 0] CAID: 0D70 ECM_PID: 008C PROVID: 000000
2011/09/04 10:51:25 2B6BC4E8 c dvbapi: [ADD PID 0] CAID: 0D70 ECM_PID: 008C PROVID: 000000
2011/09/04 10:51:25 2B6BC4E8 c dvbapi: stoping demux for pmt file /tmp/pmt.tmp
2011/09/04 10:51:25 2B6BC4E8 c dvbapi: [ADD PID 1] CAID: 0D03 ECM_PID: 00AA PROVID: 000000
2011/09/04 10:51:25 2B6BC4E8 c dvbapi: [ADD PID 2] CAID: 0D0F ECM_PID: 00BE PROVID: 000000
2011/09/04 10:51:25 2B6BC4E8 c dvbapi: [ADD PID 3] CAID: 0624 ECM_PID: 00F0 PROVID: 000000
2011/09/04 10:51:25 2B6BC4E8 c dvbapi: [ADD PID 4] CAID: 0D96 ECM_PID: 0104 PROVID: 000000
2011/09/04 10:51:25 2B6BC4E8 c dvbapi: [ADD PID 5] CAID: 0666 ECM_PID: 0B18 PROVID: 000000
2011/09/04 10:51:25 2B6BC4E8 c dvbapi: new program number: 13A6 ()
2011/09/04 10:51:25 2B6BC4E8 c dvbapi: Start descrambling PID #4 (CAID: 0D96) 1
2011/09/04 10:51:25 2B6BC4E8 c dummy (0D96&000004/0000/80:5000): invalid (1 ms) (of 0 avail 0) (invalid SID)
2011/09/04 10:51:26 2B6BC4E8 c dvbapi: Start descrambling PID #4 (CAID: 0D96) 1
2011/09/04 10:51:26 2B6BC4E8 c dummy (0D96&000004/13A6/80:5000): found (100 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:51:29 2B6BC4E8 c dvbapi: [ADD PID 6] CAID: 0D70 ECM_PID: 008C PROVID: 000000
2011/09/04 10:51:29 2B6BC4E8 c dvbapi: [ADD PID 7] CAID: 0D03 ECM_PID: 00AA PROVID: 000000
2011/09/04 10:51:29 2B6BC4E8 c dvbapi: [ADD PID 8] CAID: 0D0F ECM_PID: 00BE PROVID: 000000
2011/09/04 10:51:29 2B6BC4E8 c dvbapi: [ADD PID 9] CAID: 0624 ECM_PID: 00F0 PROVID: 000000
2011/09/04 10:51:29 2B6BC4E8 c dvbapi: [ADD PID 10] CAID: 0D96 ECM_PID: 0104 PROVID: 000000
2011/09/04 10:51:29 2B6BC4E8 c dvbapi: [ADD PID 11] CAID: 0666 ECM_PID: 0B18 PROVID: 000000
2011/09/04 10:51:29 2B6BC4E8 c dvbapi: new program number: 13A6 (0000:13A6 unknown)
2011/09/04 10:51:29 2B6BC4E8 c dvbapi: Start descrambling PID #10 (CAID: 0D96) 2
2011/09/04 10:51:29 2B6BC4E8 c dummy (0D96&000004/13A6/80:5000): cache1 (0 ms) by skylink_ice (of 0 avail 0)
2011/09/04 10:51:40 2B6BC4E8 c dummy (0D96&000004/13A6/80:FC2F): found (92 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:51:40 2B6BC4E8 c dummy (0D96&000004/13A6/80:FC2F): cache2 (98 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:51:40 2B6BC4E8 c dummy (0D96&000004/13A6/80:FC2F): cache2 (107 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:52:01 2B6BC4E8 c dummy (0D96&000004/13A6/80:3C7E): found (88 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:52:01 2B6BC4E8 c dummy (0D96&000004/13A6/80:3C7E): cache2 (97 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:52:01 2B6BC4E8 c dummy (0D96&000004/13A6/80:3C7E): cache2 (106 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:52:22 2B6BC4E8 c dummy (0D96&000004/13A6/80:8144): found (89 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:52:22 2B6BC4E8 c dummy (0D96&000004/13A6/80:8144): cache2 (97 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:52:22 2B6BC4E8 c dummy (0D96&000004/13A6/80:8144): cache2 (107 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:52:43 2B6BC4E8 c dummy (0D96&000004/13A6/80:FD3A): found (88 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:52:43 2B6BC4E8 c dummy (0D96&000004/13A6/80:FD3A): cache2 (97 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:52:43 2B6BC4E8 c dummy (0D96&000004/13A6/80:FD3A): cache2 (106 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:53:04 2B6BC4E8 c dummy (0D96&000004/13A6/80:E764): found (95 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:53:04 2B6BC4E8 c dummy (0D96&000004/13A6/80:E764): cache2 (104 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:53:04 2B6BC4E8 c dummy (0D96&000004/13A6/80:E764): cache2 (114 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:53:25 2B6BC4E8 c dummy (0D96&000004/13A6/80:994C): found (95 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:53:25 2B6BC4E8 c dummy (0D96&000004/13A6/80:994C): cache2 (104 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:53:25 2B6BC4E8 c dummy (0D96&000004/13A6/80:994C): cache2 (113 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:53:46 2B6BC4E8 c dummy (0D96&000004/13A6/80:6E92): found (90 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:53:46 2B6BC4E8 c dummy (0D96&000004/13A6/80:6E92): cache2 (100 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:53:46 2B6BC4E8 c dummy (0D96&000004/13A6/80:6E92): cache2 (109 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:54:07 2B6BC4E8 c dummy (0D96&000004/13A6/80:698B): found (88 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:54:07 2B6BC4E8 c dummy (0D96&000004/13A6/80:698B): cache2 (99 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:54:07 2B6BC4E8 c dummy (0D96&000004/13A6/80:698B): cache2 (107 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:54:28 2B6BC4E8 c dummy (0D96&000004/13A6/80:D3CB): found (88 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:54:28 2B6BC4E8 c dummy (0D96&000004/13A6/80:D3CB): cache2 (97 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:54:28 2B6BC4E8 c dummy (0D96&000004/13A6/80:D3CB): cache2 (106 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:54:49 2B6BC4E8 c dummy (0D96&000004/13A6/80:5A59): found (95 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:54:49 2B6BC4E8 c dummy (0D96&000004/13A6/80:5A59): cache2 (104 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:54:49 2B6BC4E8 c dummy (0D96&000004/13A6/80:5A59): cache2 (113 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:55:10 2B6BC4E8 c dummy (0D96&000004/13A6/80:49FE): found (88 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:55:10 2B6BC4E8 c dummy (0D96&000004/13A6/80:49FE): cache2 (97 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:55:10 2B6BC4E8 c dummy (0D96&000004/13A6/80:49FE): cache2 (107 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:55:31 2B6BC4E8 c dummy (0D96&000004/13A6/80:C25F): found (95 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:55:31 2B6BC4E8 c dummy (0D96&000004/13A6/80:C25F): cache2 (105 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:55:31 2B6BC4E8 c dummy (0D96&000004/13A6/80:C25F): cache2 (114 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:55:52 2B6BC4E8 c dummy (0D96&000004/13A6/80:E4C4): found (91 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:55:52 2B6BC4E8 c dummy (0D96&000004/13A6/80:E4C4): cache2 (100 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:55:52 2B6BC4E8 c dummy (0D96&000004/13A6/80:E4C4): cache2 (109 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:56:13 2B6BC4E8 c dummy (0D96&000004/13A6/80:E77C): found (88 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:56:13 2B6BC4E8 c dummy (0D96&000004/13A6/80:E77C): cache2 (96 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:56:13 2B6BC4E8 c dummy (0D96&000004/13A6/80:E77C): cache2 (106 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:56:34 2B6BC4E8 c dummy (0D96&000004/13A6/80:8817): found (89 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:56:34 2B6BC4E8 c dummy (0D96&000004/13A6/80:8817): cache2 (97 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:56:34 2B6BC4E8 c dummy (0D96&000004/13A6/80:8817): cache2 (106 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:56:48 2B6BC4E8 c dvbapi: stoping demux for pmt file /tmp/pmt.tmp
2011/09/04 10:56:48 2B6BC4E8 c dvbapi: [ADD PID 0] CAID: 0D0F ECM_PID: 0802 PROVID: 000000
2011/09/04 10:56:48 2B6BC4E8 c dvbapi: [ADD PID 1] CAID: 0666 ECM_PID: 002E PROVID: 000000
2011/09/04 10:56:48 2B6BC4E8 c dvbapi: [ADD PID 2] CAID: 0624 ECM_PID: 0F17 PROVID: 000000
2011/09/04 10:56:48 2B6BC4E8 c dvbapi: [ADD PID 3] CAID: 0D96 ECM_PID: 0F16 PROVID: 000000
2011/09/04 10:56:48 2B6BC4E8 c dvbapi: [ADD PID 4] CAID: 0D70 ECM_PID: 0804 PROVID: 000000
2011/09/04 10:56:48 2B6BC4E8 c dvbapi: [ADD PID 5] CAID: 0D03 ECM_PID: 0803 PROVID: 000000
2011/09/04 10:56:48 2B6BC4E8 c dvbapi: new program number: 36F6 (ÈT 1 HD)
2011/09/04 10:56:48 2B6BC4E8 c dvbapi: Start descrambling PID #3 (CAID: 0D96) 1
2011/09/04 10:56:48 2B6BC4E8 c dummy (0D96&000024/36F6/80:D48C): invalid (0 ms) (of 0 avail 0) (invalid SID)
2011/09/04 10:56:49 2B6BC4E8 c dummy (0D96&000024/36F6/80:86F3): invalid (1 ms) (of 0 avail 0) (invalid SID)
2011/09/04 10:56:59 2B6BC4E8 c dummy (0D96&000024/36F6/80:223E): invalid (0 ms) (of 0 avail 0) (invalid SID)
2011/09/04 10:57:09 2B6BC4E8 c dummy (0D96&000024/36F6/80:31B2): invalid (0 ms) (of 0 avail 0) (invalid SID)
2011/09/04 10:57:14 2B6BC4E8 c dvbapi: [ADD PID 0] CAID: 0D03 ECM_PID: 00C9 PROVID: 000000
2011/09/04 10:57:14 2B6BC4E8 c dvbapi: [ADD PID 1] CAID: 0D70 ECM_PID: 00D3 PROVID: 000000
2011/09/04 10:57:14 2B6BC4E8 c dvbapi: [ADD PID 2] CAID: 0D0F ECM_PID: 00DD PROVID: 000000
2011/09/04 10:57:14 2B6BC4E8 c dvbapi: [ADD PID 3] CAID: 0D96 ECM_PID: 00E7 PROVID: 000000
2011/09/04 10:57:14 2B6BC4E8 c dvbapi: [ADD PID 4] CAID: 0624 ECM_PID: 00F1 PROVID: 000000
2011/09/04 10:57:14 2B6BC4E8 c dvbapi: [ADD PID 5] CAID: 0666 ECM_PID: 0489 PROVID: 000000
2011/09/04 10:57:14 2B6BC4E8 c dvbapi: new program number: 1F41 (TV Markíza)
2011/09/04 10:57:15 2B6BC4E8 c dvbapi: Start descrambling PID #3 (CAID: 0D96) 1
2011/09/04 10:57:15 2B6BC4E8 c dummy (0D96&000004/1F41/80:84E1): found (88 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:57:24 2B6BC4E8 c dummy (0D96&000004/1F41/80:B5B1): found (88 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:57:38 2B6BC4E8 c dvbapi: [ADD PID 0] CAID: 0D70 ECM_PID: 008D PROVID: 000000
2011/09/04 10:57:38 2B6BC4E8 c dvbapi: [ADD PID 1] CAID: 0D03 ECM_PID: 00AB PROVID: 000000
2011/09/04 10:57:38 2B6BC4E8 c dvbapi: [ADD PID 2] CAID: 0D0F ECM_PID: 00BF PROVID: 000000
2011/09/04 10:57:38 2B6BC4E8 c dvbapi: [ADD PID 3] CAID: 0624 ECM_PID: 00F1 PROVID: 000000
2011/09/04 10:57:38 2B6BC4E8 c dvbapi: [ADD PID 4] CAID: 0D96 ECM_PID: 0105 PROVID: 000000
2011/09/04 10:57:38 2B6BC4E8 c dvbapi: [ADD PID 5] CAID: 0666 ECM_PID: 0B19 PROVID: 000000
2011/09/04 10:57:38 2B6BC4E8 c dvbapi: new program number: 13A7 (JOJ PLUS)
2011/09/04 10:57:38 2B6BC4E8 c dvbapi: Start descrambling PID #4 (CAID: 0D96) 1
2011/09/04 10:57:38 2B6BC4E8 c dummy (0D96&000004/13A7/80:1431): found (88 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:57:45 2B6BC4E8 c dvbapi: [ADD PID 0] CAID: 0D03 ECM_PID: 00CD PROVID: 000000
2011/09/04 10:57:45 2B6BC4E8 c dvbapi: [ADD PID 1] CAID: 0D70 ECM_PID: 00D7 PROVID: 000000
2011/09/04 10:57:45 2B6BC4E8 c dvbapi: [ADD PID 2] CAID: 0D0F ECM_PID: 00E1 PROVID: 000000
2011/09/04 10:57:45 2B6BC4E8 c dvbapi: [ADD PID 3] CAID: 0D96 ECM_PID: 00EB PROVID: 000000
2011/09/04 10:57:45 2B6BC4E8 c dvbapi: [ADD PID 4] CAID: 0624 ECM_PID: 00F5 PROVID: 000000
2011/09/04 10:57:45 2B6BC4E8 c dvbapi: [ADD PID 5] CAID: 0666 ECM_PID: 048D PROVID: 000000
2011/09/04 10:57:45 2B6BC4E8 c dvbapi: new program number: 1F45 (DOMA)
2011/09/04 10:57:46 2B6BC4E8 c dvbapi: Start descrambling PID #3 (CAID: 0D96) 1
2011/09/04 10:57:46 2B6BC4E8 c dummy (0D96&000004/1F45/80:61C7): found (89 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:57:50 2B6BC4E8 c dvbapi: [ADD PID 0] CAID: 0D03 ECM_PID: 00C9 PROVID: 000000
2011/09/04 10:57:50 2B6BC4E8 c dvbapi: [ADD PID 1] CAID: 0D70 ECM_PID: 00D3 PROVID: 000000
2011/09/04 10:57:50 2B6BC4E8 c dvbapi: [ADD PID 2] CAID: 0D0F ECM_PID: 00DD PROVID: 000000
2011/09/04 10:57:50 2B6BC4E8 c dvbapi: [ADD PID 3] CAID: 0D96 ECM_PID: 00E7 PROVID: 000000
2011/09/04 10:57:50 2B6BC4E8 c dvbapi: [ADD PID 4] CAID: 0624 ECM_PID: 00F1 PROVID: 000000
2011/09/04 10:57:50 2B6BC4E8 c dvbapi: [ADD PID 5] CAID: 0666 ECM_PID: 0489 PROVID: 000000
2011/09/04 10:57:50 2B6BC4E8 c dvbapi: new program number: 1F41 (TV Markíza)
2011/09/04 10:57:50 2B6BC4E8 c dvbapi: Start descrambling PID #3 (CAID: 0D96) 1
2011/09/04 10:57:50 2B6BC4E8 c dummy (0D96&000004/1F41/80:B14F): found (88 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:58:06 2B6BC4E8 c dummy (0D96&000004/1F41/80:9490): found (89 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:58:24 2B6BC4E8 c dvbapi: [ADD PID 0] CAID: 0D03 ECM_PID: 00CD PROVID: 000000
2011/09/04 10:58:24 2B6BC4E8 c dvbapi: [ADD PID 1] CAID: 0D70 ECM_PID: 00D7 PROVID: 000000
2011/09/04 10:58:24 2B6BC4E8 c dvbapi: [ADD PID 2] CAID: 0D0F ECM_PID: 00E1 PROVID: 000000
2011/09/04 10:58:24 2B6BC4E8 c dvbapi: [ADD PID 3] CAID: 0D96 ECM_PID: 00EB PROVID: 000000
2011/09/04 10:58:24 2B6BC4E8 c dvbapi: [ADD PID 4] CAID: 0624 ECM_PID: 00F5 PROVID: 000000
2011/09/04 10:58:24 2B6BC4E8 c dvbapi: [ADD PID 5] CAID: 0666 ECM_PID: 048D PROVID: 000000
2011/09/04 10:58:24 2B6BC4E8 c dvbapi: new program number: 1F45 (DOMA)
2011/09/04 10:58:24 2B6BC4E8 c dvbapi: Start descrambling PID #3 (CAID: 0D96) 1
2011/09/04 10:58:24 2B6BC4E8 c dummy (0D96&000004/1F45/80:21F5): found (88 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:58:32 2B6BC4E8 c dummy (0D96&000004/1F45/80:087E): found (88 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:58:53 2B6BC4E8 c dummy (0D96&000004/1F45/80:E9FC): found (88 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:59:14 2B6BC4E8 c dummy (0D96&000004/1F45/80:6764): found (88 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:59:35 2B6BC4E8 c dummy (0D96&000004/1F45/80:C1F7): found (88 ms) by skylink_ice (of 1 avail 1)
2011/09/04 10:59:56 2B6BC4E8 c dummy (0D96&000004/1F45/80:EC65): found (88 ms) by skylink_ice (of 1 avail 1)
2011/09/04 11:00:17 2B6BC4E8 c dummy (0D96&000004/1F45/80:7AAE): found (87 ms) by skylink_ice (of 1 avail 1)
2011/09/04 11:00:38 2B6BC4E8 c dummy (0D96&000004/1F45/80:83A3): found (87 ms) by skylink_ice (of 1 avail 1)
2011/09/04 11:00:59 2B6BC4E8 c dummy (0D96&000004/1F45/80:422F): found (88 ms) by skylink_ice (of 1 avail 1)
2011/09/04 11:01:20 2B6BC4E8 c dummy (0D96&000004/1F45/80:55D8): found (88 ms) by skylink_ice (of 1 avail 1)
2011/09/04 11:01:41 2B6BC4E8 c dummy (0D96&000004/1F45/80:FC32): found (88 ms) by skylink_ice (of 1 avail 1)
2011/09/04 11:02:02 2B6BC4E8 c dummy (0D96&000004/1F45/80:A45C): found (87 ms) by skylink_ice (of 1 avail 1)
2011/09/04 11:02:23 2B6BC4E8 c dummy (0D96&000004/1F45/80:919C): found (88 ms) by skylink_ice (of 1 avail 1)
2011/09/04 11:02:44 2B6BC4E8 c dummy (0D96&000004/1F45/80:61EB): found (88 ms) by skylink_ice (of 1 avail 1)
2011/09/04 11:03:05 2B6BC4E8 c dummy (0D96&000004/1F45/80:BA6F): found (87 ms) by skylink_ice (of 1 avail 1)
2011/09/04 11:03:26 2B6BC4E8 c dummy (0D96&000004/1F45/80:05C1): found (87 ms) by skylink_ice (of 1 avail 1)
2011/09/04 11:03:47 2B6BC4E8 c dummy (0D96&000004/1F45/80:510E): found (88 ms) by skylink_ice (of 1 avail 1)
2011/09/04 11:04:08 2B6BC4E8 c dummy (0D96&000004/1F45/80:DB24): found (88 ms) by skylink_ice (of 1 avail 1)
2011/09/04 11:04:29 2B6BC4E8 c dummy (0D96&000004/1F45/80:CC4B): found (87 ms) by skylink_ice (of 1 avail 1)
2011/09/04 11:04:50 2B6BC4E8 c dummy (0D96&000004/1F45/80:0031): found (87 ms) by skylink_ice (of 1 avail 1)
2011/09/04 11:05:11 2B6BC4E8 c dummy (0D96&000004/1F45/80:5E84): found (88 ms) by skylink_ice (of 1 avail 1)
2011/09/04 11:05:32 2B6BC4E8 c dummy (0D96&000004/1F45/80:35E5): found (91 ms) by skylink_ice (of 1 avail 1)
2011/09/04 11:05:53 2B6BC4E8 c dummy (0D96&000004/1F45/80:E310): found (91 ms) by skylink_ice (of 1 avail 1)
2011/09/04 11:06:14 2B6BC4E8 c dummy (0D96&000004/1F45/80:3C6E): found (87 ms) by skylink_ice (of 1 avail 1)
2011/09/04 11:06:35 2B6BC4E8 c dummy (0D96&000004/1F45/80:A686): found (88 ms) by skylink_ice (of 1 avail 1)


Screenshot web rozhrania je v prilohe.

Dakujem velmi pekne!
Screen shot 2011-09-04 at 11.00.38 AM.png
Nemáte oprávnění prohlížet přiložené soubory.
Nahoru
Uživatelský avatar
sraeP
Pokročilý
Pokročilý
Příspěvky: 172
Registrován: 18.leden 2008 - 19:39

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od sraeP »

9900HD nemám, ale je ten boxtype=ufs910 je správně?

[dvbapi]
enabled = 1
au = 1
boxtype = ufs910
user = dummy

pak bych pro začátek zrušil toto:
[reader]
Label = skylink_ice
Protocol = internal
Device = /dev/sci0
group = 1
enable = 1
caid = 0D96
services = skylink_ice

do oscam.dvbapi toto:
P: 0D96 1

a zatím zrušit toto:
oscam.user

[account]
user = dummy
pwd = dummy
group = 1
uniq = 1
au = 1
caid = 0D96
services = skylink_ice
betatunnel = 1833.FFFF:1702
Nahoru
moulikpeta
Mírně pokročilý
Mírně pokročilý
Příspěvky: 34
Registrován: 05.červenec 2007 - 13:12
satelitni prijimac: sarajevo
Bydliště: Paraguay
Kontaktovat uživatele:
Kontaktovat uživatele moulikpeta

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od moulikpeta »

pokud mas ab enigmu nastav boxtype = ipbox pokud mas nocturno enigmu nastav boxtype =duckbox
Nahoru
termix
Registrovaný
Registrovaný
Příspěvky: 2
Registrován: 14.červenec 2011 - 20:31

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od termix »

Parada, pomohlo, dakujem.
Nahoru
Uživatelský avatar
Vilo952
Pokročilý
Pokročilý
Příspěvky: 136
Registrován: 22.listopad 2010 - 21:13
satelitni prijimac: Amiko, Cryptobox, ...
Bydliště: Vranov nad Topľou
Kontaktovat uživatele:
Kontaktovat uživatele Vilo952

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od Vilo952 »

prosim vas, mam kartu cslink a chcem do oscamu pridat zdielanie z vonku, konkretne shura.tv - to je test server a ponukaju aj skylink full, da sa obmedzit aby mi ta shura dekodovala len to, co nie je na mojej karte ? videl som nasmerovanie oscamu pri dvoch kartach, da sa nieco aj pri tom ?
:: Villy ::
Cryptobox 650HD, Amiko 8150HD SE
Fte 105 - Multifeed 13.0 - 19.2 - 23.5
Nahoru
Uživatelský avatar
wanthom
Pokročilý
Pokročilý
Příspěvky: 133
Registrován: 25.březen 2009 - 21:50
satelitni prijimac: VU+ Duo 4K
Bydliště: Košice - Malá Ida
Kontaktovat uživatele:
Kontaktovat uživatele wanthom

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od wanthom »

Vilo952: Áno, dá sa to, je to potrebné definovať v súbore oscam.services. Dúfam, že to dobre vysvetlím, sám som také niečo riešil (vďaka kamarátovi tu na fóre).
Keďže kanály sú kódované v troch ID, tak je potrebné definovať čo bude dekodovať z karty a čo nie.
Napíšem ako to mám ja :
oscam.services :

Kód: Vybrat vše

[skylink_ice_zaklad_mojakarta-0D96]
caid                          = 0D96
provid                        = 000004
srvid                         = 1F42,1F43,1F41,1F45,13A6,13A7,1F44,1F47,36F6,13D1,3353,13CF,3338,3355,13D3

[skylink_ice_zaklad_mojakarta-0D03]
caid                          = 0D03
provid                        = 000004
srvid                         = 1F42,1F43,1F41,1F45,13A6,13A7,1F44,1F47,36F6,13D1,3353,13CF,3338,3355,13D3

[skylink_ice_zaklad_mojakarta-0D0F]
caid                          = 0D0F
provid                        = 000004
srvid                         = 1F42,1F43,1F41,1F45,13A6,13A7,1F44,1F47,36F6,13D1,3353,13CF,3338,3355,13D3
Potom v oscam server mam nastavenu moju karty co ma citat:

Kód: Vybrat vše

[reader]
label                         = dolna-skylink
protocol                      = internal
device                        = /dev/sci0
services                      = skylink_ice_zaklad_mojakarta-0d96,!skylink_ice_zaklad_mojakarta-0d03,!skylink_ice_zaklad_mojakarta-0d0f
caid                          = 0D96
detect                        = cd
mhz                           = 500
cardmhz                       = 357
deprecated                    = 1
ident                         = 0D96:000004
group                         = 1
emmcache                      = 1,3,2
Ten vykricnik znamena ze ten services nema hladat na karte (ine ID karty)
Srvid jednotlivych stanic si vies skontrolovat v oscam.srvid.
VU+ Duo 4K, VU+ Uno 4K SE
AB Pulse 4K, dvojtuner
Maximum E-85 multifocus - 0,8W° + 13°E + 19,2°E + 23,5°E + 28,2°E
Nahoru
marty_
Registrovaný
Registrovaný
Příspěvky: 3
Registrován: 11.květen 2011 - 9:35
Kontaktovat uživatele:
Kontaktovat uživatele marty_

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od marty_ »

zdravim, existuje nekde napoveda jak na nastaveni ostamu?
oficialni
http://streamboard.gmc.to/wiki/index.ph ... er#expdate
nefunguje.
chtel jsem nastavit expiredate a netusim v jakem formatu
dekuji za rady
Nahoru
Uživatelský avatar
jany
Pokročilý
Pokročilý
Příspěvky: 131
Registrován: 12.listopad 2007 - 21:47
satelitni prijimac: IP Box200/250, SS1,SS2
Kontaktovat uživatele:
Kontaktovat uživatele jany

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od jany »

Este davno ked boli vydavane full balicky, tak v kazdom bola pribalena aj dokumentacia. Urcite sa uz od vtedy robili nejake zmeny apod ... ale teoreticky by ti to mohlo stacit
Nemáte oprávnění prohlížet přiložené soubory.

IP Box 9000HD | E2 PKT 1.0.0 | Stab HH90 | LNB Strong Twin
IP Box 9900HD | E2 HD |
SS HD2 | SG2100 | DVBViewer | hadu
Ubuntu 12.04 | phoenix usb2x | oscam 1.20 build 83xx
SS2 rev 2.3 | SS1 rev 1.3 | uz nepouzivam
Network http://network.mysteria.cz/
Nahoru
Surtep
Pokročilý
Pokročilý
Příspěvky: 159
Registrován: 07.duben 2008 - 18:50

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od Surtep »

expdate = <year>-<month>-<day> | <year>/<month>/<day>
expiration date for account, default:none

expdate = 2001-11-21
expdate = 2002/12/22
Nahoru
marty_
Registrovaný
Registrovaný
Příspěvky: 3
Registrován: 11.květen 2011 - 9:35
Kontaktovat uživatele:
Kontaktovat uživatele marty_

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od marty_ »

diky slape to, pouze ariva pak bombarduje DM oscam i nekolikrat za sekundu viz:

Kód: Vybrat vše

2011/09/16 12:17:29 3B201B50 c user2 (0000&000004/13D1/80:6E6B): expdate (0 ms) (of 0 avail 0)
2011/09/16 12:17:30 3B201B50 c user2 (0000&000004/13D1/9C:2C81): expdate (0 ms) (of 0 avail 0)
2011/09/16 12:17:30 391FFB50 c user3 (0D03&000008/2336/9C:BEFB): found (226 ms) by dream_zaloha (of 1 avail 1)
2011/09/16 12:17:30 3B201B50 c user2 (0000&000004/13D1/80:6E6B): expdate (0 ms) (of 0 avail 0)
2011/09/16 12:17:30 3B201B50 c user2 (0000&000004/13D1/9C:2C81): expdate (0 ms) (of 0 avail 0)
2011/09/16 12:17:30 381FFB50 c user1 (0D03&000004/1F47/A5:E6A2): found (259 ms) by dream_zaloha (of 1 avail 1)
2011/09/16 12:17:30 3B201B50 c user2 (0000&000004/13D1/80:6E6B): expdate (0 ms) (of 0 avail 0)
2011/09/16 12:17:30 3B201B50 c user2 (0000&000004/13D1/9C:2C81): expdate (0 ms) (of 0 avail 0)
2011/09/16 12:17:30 3B201B50 c user2 (0000&000004/13D1/80:6E6B): expdate (0 ms) (of 0 avail 0)
2011/09/16 12:17:30 3B201B50 c user2 (0000&000004/13D1/9C:2C81): expdate (0 ms) (of 0 avail 0)
2011/09/16 12:17:31 3B201B50 c user2 (0000&000004/13D1/80:6E6B): expdate (0 ms) (of 0 avail 0)
2011/09/16 12:17:31 3B201B50 c user2 (0000&000004/13D1/9C:2C81): expdate (1 ms) (of 0 avail 0)
2011/09/16 12:17:31 3B201B50 c user2 (0000&000004/13D1/80:6E6B): expdate (1 ms) (of 0 avail 0)
2011/09/16 12:17:31 3B201B50 c user2 (0000&000004/13D1/9C:2C81): expdate (0 ms) (of 0 avail 0)
2011/09/16 12:17:31 3B201B50 c user2 (0000&000004/13D1/80:9952): expdate (0 ms) (of 0 avail 0)
2011/09/16 12:17:31 3B201B50 c user2 (0000&000004/13D1/9C:88F1): expdate (0 ms) (of 0 avail 0)
2011/09/16 12:17:32 3B201B50 c user2 (0000&000004/13D1/80:9952): expdate (0 ms) (of 0 avail 0)
2011/09/16 12:17:32 3B201B50 c user2 (0000&000004/13D1/9C:88F1): expdate (0 ms) (of 0 avail 0)
2011/09/16 12:17:32 3B201B50 c user2 (0000&000004/13D1/80:9952): expdate (0 ms) (of 0 avail 0)
2011/09/16 12:17:32 3B201B50 c user2 (0000&000004/13D1/9C:88F1): expdate (0 ms) (of 0 avail 0)
2011/09/16 12:17:32 3B201B50 c user2 (0000&000004/13D1/80:9952): expdate (0 ms) (of 0 avail 0)
2011/09/16 12:17:32 3B201B50 c user2 (0000&000004/13D1/9C:88F1): expdate (0 ms) (of 0 avail 0)
2011/09/16 12:17:33 3B201B50 c user2 (0000&000004/13D1/80:9952): expdate (0 ms) (of 0 avail 0)
2011/09/16 12:17:33 3B201B50 c user2 (0000&000004/13D1/9C:88F1): expdate (0 ms) (of 0 avail 0)
2011/09/16 12:17:33 3B201B50 c user2 (0000&000004/13D1/80:9952): expdate (0 ms) (of 0 avail 0)
2011/09/16 12:17:33 3B201B50 c user2 (0000&000004/13D1/9C:88F1): expdate (0 ms) (of 0 avail 0)
Nahoru
drto
Pokročilý
Pokročilý
Příspěvky: 212
Registrován: 16.září 2010 - 14:51

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od drto »

viem ze je toto vlakno len o oscame ale spytam sa na nasledovny problem:
spravne som pochopil ze DIGITAL+ a HD+ baliky sa na mgcamd nedaju spojazdnit? vstko mi ide super okrem tychto dvoch uvedenych providerov. najvaiac ma stve ten DIGITAL+ koli futbalu. je teda nejaka moznost ako to ma mgcamd spojazdnit? dik za reakcie a rady
DM800HD klon - Image OpenPLI
13E + 19,2E + 23,5E + 28,2E
Amiko Alien SHD 8900 (uz je posunuty svokrovi) - PKT GM990 E2 NEBULA v3 - Skin: Silver HD
Oscam 6241
Nahoru
vladinolive
Registrovaný
Registrovaný
Příspěvky: 13
Registrován: 27.březen 2010 - 23:20

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od vladinolive »

Chcem sa spýtať mam sharing Oscam-Cccam a či ide nazdielať aj keys čo ručne nahodim alebo iba z karty/inych serverov.
VU+ Zero 4K - VTi 15.0.0 , Formuler 4 - OpenATV 6.3 , OSCam r11523 l2b
Nahoru
hydrant
Registrovaný
Registrovaný
Příspěvky: 11
Registrován: 14.červen 2008 - 8:20

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od hydrant »

zdravim pomozete mi s hbo hd?

dnes som si aktovoval bonus hbo hd ale oscam hlasi eror netusim v com je chyba mam ice kartu a dreambox dm 500hd a balik hd plus nemam nieco v ignore alebo neviem pls poradte


log z oscamu


2011/10/01 11:04:52 57C610 c user1 (0D96&000004/13B7/80:ADE2): rejected (5001 ms) by dm600 (2 of 2)
2011/10/01 11:04:57 571A98 r Error processing ecm for caid 0D96, srvid 13B7 (servicename: HBO HD) on reader citacka.
2011/10/01 11:05:02 57C610 c user1 (0D96&000004/13B7/80:90B0): rejected (5001 ms) by dm600 (2 of 2)
2011/10/01 11:05:07 571A98 r Error processing ecm for caid 0D96, srvid 13B7 (servicename: HBO HD) on reader citacka.
2011/10/01 11:05:12 57C610 c user1 (0D96&000004/13B7/80:AFD4): rejected (5001 ms) by dm600 (2 of 2)
2011/10/01 11:05:17 571A98 r Error processing ecm for caid 0D96, srvid 13B7 (servicename: HBO HD) on reader citacka.
2011/10/01 11:05:22 57C610 c user1 (0D96&000004/13B7/80:C556): rejected (5001 ms) by dm600 (2 of 2)
2011/10/01 11:05:27 571A98 r Error processing ecm for caid 0D96, srvid 13B7 (servicename: HBO HD) on reader citacka.
2011/10/01 11:05:32 57C610 c user1 (0D96&000004/13B7/80:E763): timeout (5001 ms) by citacka (2 of 2)
2011/10/01 11:05:32 5BE740 c dm600 (0D96&000004/13B7/80:E763): timeout (4958 ms) (2 of 2)
2011/10/01 11:05:37 571A98 r Error processing ecm for caid 0D96, srvid 13B7 (servicename: HBO HD) on reader citacka.
SONY KDL-40W5500 SONY BDV-E870
DREAMBOX dm500HD Newnigma2 v3.3 OsCAM 1.20 5882
Wavefrontier Toroidal T90 - 01,0°W - 13,0°E - 19,2°E - 23,5°E
Nahoru
hydrant
Registrovaný
Registrovaný
Příspěvky: 11
Registrován: 14.červen 2008 - 8:20

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od hydrant »

tu je este nieco z conf

P: 0D70
P: 0D96 1
I: 0D03
I: 0624
I: 0666


[skylink_ice]
caid = 0D96,0624
provid = 000004
srvid = 333B,1B71,5156,1B62,13BD,1F43,36F6,1F44,1F47,13AD,2336,1F45,13B6,13B1,07E9,2329,232B,13B3,3330,13B7,020A,13B2,2331,13A6,13A7,232D,2333,3354,13AC,13AE,2334,3352,13B4,3353,3351,13B5,334D,332D,1F42,1F43,1F44,13AB,1F41,1F42,3338,232F,2330,13BC

0D03,0D96,0D70,0624:13B7|Skylink| HBO HD
SONY KDL-40W5500 SONY BDV-E870
DREAMBOX dm500HD Newnigma2 v3.3 OsCAM 1.20 5882
Wavefrontier Toroidal T90 - 01,0°W - 13,0°E - 19,2°E - 23,5°E
Nahoru
hydrant
Registrovaný
Registrovaný
Příspěvky: 11
Registrován: 14.červen 2008 - 8:20

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od hydrant »

oravil som si to uz stacilo jeden riadok upravit
SONY KDL-40W5500 SONY BDV-E870
DREAMBOX dm500HD Newnigma2 v3.3 OsCAM 1.20 5882
Wavefrontier Toroidal T90 - 01,0°W - 13,0°E - 19,2°E - 23,5°E
Nahoru
Uživatelský avatar
soki
Mírně pokročilý
Mírně pokročilý
Příspěvky: 26
Registrován: 10.červenec 2007 - 8:34
satelitni prijimac: DM8000, Cryp. 400mini, DM7020
Kontaktovat uživatele:
Kontaktovat uživatele soki

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od soki »

Zdravim
Mam otazku, je mozne urobit resharing zo servera CCcam (na ktorom je zakazany resharing) cez OSCAM ;-)
Dost som hladal a vraj to ide ale nikde som nenasiel ako sa to da. Bude niekto ochotny a vysvetli mi to (ak je problem tak aj cez ss)
Vopred moc dakujem :-)
Nahoru
duchman
Mírně pokročilý
Mírně pokročilý
Příspěvky: 38
Registrován: 05.listopad 2008 - 23:49

Re: Oscam a jeho nastavenie (s popisom - testovane v E2)

Příspěvek od duchman »

podle mne to technicky mozne je, ale je to velka prasarna. Pak taky ty cccam site podle toho vypadaji,
kdyz si kazdy resharuje jak chce. Prece majitel karty musi mit moznost nastavit reshare parametry jak potrebuje,
jinak je to cele sdileni o nicem a vsichni se budou divat jen na neustale se zastavujici obraz. Uzasne.
Nahoru
Odpovědět

Zpět na „Oscam - multiprotokolárny kartový server“