Oscam na Ubuntu - FFFE:FFFE u CAID:SRVID

[patris007]

Nainstaloval sem Oscam na PC s Ubuntu. K serveru se chci pripojit z Dreamboxu pres CCcam. Kdyz se pripoji klient na ten pocitac, tak to ve webif pise:

Label - Protocol - CAID:SRVID - Status
patris - cccam (2.1.4-3191) - FFFE:FFFE - OK

FFFE:FFFE mam u vsech klientu at prepinam programy jak chci.

kartu mam ICE a v satelitu pres SCAM funguje v pohode. Vypis Entitlements:

->type: CryptoWorks, caid: 0D96, ascii serial: xxxxx, hex serial: xxxxx
issuer: CryptoWorks, id: 04, bios: v3, pin: unknown, mfid: 3F00
providers: 4 (04,08,0C,10)
provider: 1, id: 04, name: Operator: FFFF
chid: 1389, date: 2011/11/09 - 2011/11/29, name: Product 1389
chid: 138A, date: 2011/11/09 - 2011/11/29, name: Product 138A
chid: 138B, date: 2011/11/09 - 2011/11/29, name: Product 138B

Oscam.log

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Thu Nov 10 10:30:18 2011
-------------------------------------------------------------------------------
2011/11/10 10:30:18 B78D56C0 s >> OSCam << cardserver started, version 1.10rc-svn, build #5954 (i586-pc-linux)
2011/11/10 10:30:18 B78D56C0 s version=1.10rc-svn, build #5954, system=i586-pc-linux, nice=-19
2011/11/10 10:30:18 B78D56C0 s client max. idle=120 sec, debug level=0
2011/11/10 10:30:18 B78D56C0 s max. logsize=100 Kb, loghistorysize=4096 bytes
2011/11/10 10:30:18 B78D56C0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2011/11/10 10:30:18 B78D56C0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2011/11/10 10:30:18 B78D56C0 s userdb reloaded: 20 accounts loaded, 0 expired, 0 disabled
2011/11/10 10:30:18 B78D56C0 s signal handling initialized (type=sysv)
2011/11/10 10:30:18 B78D56C0 s 269 service-id's loaded in 1ms
2011/11/10 10:30:18 B78D56C0 s can't open file "/usr/local/etc//oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2011/11/10 10:30:18 B78D56C0 s can't open file "/usr/local/etc//oscam.provid" (err=2 No such file or directory), no provids's loaded
2011/11/10 10:30:18 B78D56C0 s can't open file "/usr/local/etc//oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2011/11/10 10:30:18 B78D56C0 s monitor: initialized (fd=7, port=988)
2011/11/10 10:30:18 B78D56C0 s camd33: disabled
2011/11/10 10:30:18 B78D56C0 s camd35: disabled
2011/11/10 10:30:18 B78D56C0 s cs378x: disabled
2011/11/10 10:30:18 B78D56C0 s newcamd: disabled
2011/11/10 10:30:18 B78D56C0 s cccam: initialized (fd=8, port=12000, crypted)
2011/11/10 10:30:18 B78D56C0 s radegast: disabled
2011/11/10 10:30:18 B78D56C0 s http thread started
2011/11/10 10:30:18 B78D56C0 s creating thread for device 003:002
2011/11/10 10:30:18 B78D56C0 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/11/10 10:30:18 B78D56C0 s waiting for local card init
2011/11/10 10:30:18 B78B0B70 r reader thread started (thread=B78B0B70, label=skylink_ice, device=003:002, detect=cd, mhz=500, cardmhz=357)
2011/11/10 10:30:18 B78B0B70 r Using 0x82 as endpoint for smartreader hardware detection
2011/11/10 10:30:18 B78B0B70 r Found smartreader device 003:002
2011/11/10 10:30:18 B78BCB70 h HTTP Server listening on port 8888
2011/11/10 10:30:19 B78B0B70 r skylink_ice card detected
2011/11/10 10:30:20 B78B0B70 r ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2011/11/10 10:30:21 B78B0B70 r Maximum frequency for this card is formally 5 Mhz, clocking it to 4.80 Mhz
2011/11/10 10:30:22 B78B0B70 r [cryptoworks-reader] card detected
2011/11/10 10:30:22 B78B0B70 r [cryptoworks-reader] type: CryptoWorks
2011/11/10 10:30:22 B78B0B70 r type: CryptoWorks, caid: 0D96, ascii serial: xxxxxxx, hex serial: xxxxxxx
2011/11/10 10:30:22 B78B0B70 r issuer: CryptoWorks, id: 04, bios: v3, pin: unknown, mfid: 3F00
2011/11/10 10:30:22 B78B0B70 r providers: 4 (04,08,0C,10)
2011/11/10 10:30:22 B78B0B70 r found cardsystem cryptoworks
2011/11/10 10:30:22 B78B0B70 r provider: 1, id: 04, name: Operator: FFFF
2011/11/10 10:30:22 B78B0B70 r chid: 1389, date: 2011/11/09 - 2011/11/29, name: Product 1389
2011/11/10 10:30:22 B78B0B70 r chid: 138A, date: 2011/11/09 - 2011/11/29, name: Product 138A
2011/11/10 10:30:22 B78B0B70 r chid: 138B, date: 2011/11/09 - 2011/11/29, name: Product 138B
2011/11/10 10:30:22 B78B0B70 r provider: 2, id: 08, name: Operator: FFFF
2011/11/10 10:30:23 B78B0B70 r provider: 3, id: 0C, name: Operator: FFFF
2011/11/10 10:30:23 B78B0B70 r provider: 4, id: 10, name: Operator: FFFF
2011/11/10 10:30:23 B78B0B70 r [cryptoworks-reader] ready for requests
2011/11/10 10:30:23 B78D56C0 s init for all local cards done
2011/11/10 10:30:23 B78D56C0 s anti cascading disabled
2011/11/10 10:30:23 B64A2B70 c serial: initialized (auto@/dev/ttyS0)
2011/11/10 10:30:29 B5A89B70 c encrypted cccam-client xx.xx.xx.xx granted (patris, au=auto (1 reader))

oscam.conf

[global]
logfile = /tmp/oscam.log
cachedelay = 120
nice = -19
maxlogsize = 100
saveinithistory = 1

[monitor]
port = 988
nocrypt = 127.0.0.1,10.0.0.1
aulow = 30
hideclient_to = 0
monlevel = 4
appendchaninfo = 0

[cccam]
port = 12000
version = 2.1.3
updateinterval = 0
minimizecards = 0
reshare = 0

[serial]
device = user2@/dev/ttyS0?delay=1&timeout=300

[webif]
httpport = 8888
httpuser = admin
httppwd = pass
httprefresh = 0
httpallowed = 0.0.0.0-255.255.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0
httpjsicons = 1

oscam.server

[reader]
label = skylink_ice
protocol = smartreader
device = 003:002
caid = 0D96
ident = 0D96:000004
detect = cd
mhz = 500
cardmhz = 357
group = 1
emmcache = 1,2,3
deprecated = 1
audisabled = 0

oscam.services

[skylink_internal]
caid = 0D96
provid = 0,4,8,24,28
srvid = 3351,334D,332D,13BC,2331,2333,332C,3354,13AC,13AE,020A,13BD,1F47,13AD,2336,36F6,1F45,13A6,232D,2334,3352,13B4,3353,1F43,13B6,13B1,13B3,13B7,13B2,13B5,13C3,13C2,13AB,1F41,1F42,3338,232F,2330,1F44,2329,232B,333B,13A7,3334,07E9,13BA

oscam.user

[account]
user = monitor
pwd = monitor
monlevel = 4

[account]
user = patris
pwd = pass
description = DM 800
services = skylink_internal
caid = 0D96
au = 1
cccmaxhops = 0
cccreshare = 0
keepalive = 1
caid = 0D96

Kdyz se pripojim na starsi kartu skylinku 0D03 na jinym serveru taky s linuxem s tou samou USB cteckou, tak mi to ze satelitu pres CCcam jede v pohode. Kde mam chybu?

[ladan69]

máš kraviny u usera - chybí mu group
uplne stačí zadat
[account]
user = patris
pwd = pass
group = 1

[patris007]

Diky za radu, ted uz sem zas o krucek dal. Klienty uz vidim, detekuje na co prepinaji, ale nejde to jeste.

v logu je tohle:

2011/11/10 12:01:43 B77DEB70 r Error processing ecm for caid 0D96, srvid 3338 (servicename: Prima COOL) on reader skylink_ice.
2011/11/10 12:01:43 B5903B70 c patris (0D96&000004/3338/80:BF86): not found (182 ms) by skylink_ice (of 1 avail 1)

v prehledu useru vidim, ze ma
OK - 0
NOK - 40
v last channel uz pise treba Prima COOL

v oscam.services mam 3338

[skylink_internal]
caid = 0D96
provid = 0,4,8,24,28
srvid = 3351,334D,332D,13BC,2331,2333,332C,3354,13AC,13AE,020A,13BD,1F47,13AD,2336,36F6,1F45,13A6,232D,2334,3352,13B4,3353,1F43,13B6,13B1,13B3,13B7,13B2,13B5,13C3,13C2,13AB,1F41,1F42,3338,232F,2330,1F44,2329,232B,333B,13A7,3334,07E9,13BA

zkusil sem i oscam.services ze serveru odstranit, ale porad nic.

Dalsi pokus byl s upravou oscam.user

[account]
user = patris
pwd = pass
services = skylink_internal
group = 1

ale porad to nejde

[rada]

[reader]
label = skylink_ice
protocol = smartreader
device = 003:002
detect = cd
mhz = 500
cardmhz = 357
group = 1
emmcache = 1,2,3
audisabled = 0


oscam.user
Citace:
[account]
user = monitor
pwd = monitor
monlevel = 4

[account]
user = patris
pwd = pass
group = 1

Edit: Vypadl mi group při kopírování

[patris007]

Zkusil sem i vyhodit z oscam.server informaci o karte, jak jsi psal

[reader]
label = skylink_ice
protocol = smartreader
device = 003:002
caid = 0D96
ident = 0D96:000004
detect = cd
mhz = 500
cardmhz = 357
group = 1
emmcache = 1,2,3
deprecated = 1
audisabled = 0

ale porad to nejde. Stale mam v logu

2011/11/10 12:52:58 B777EB70 r Error processing ecm for caid 0D96, srvid 3338 (servicename: Prima COOL) on reader skylink_ice.
2011/11/10 12:52:58 B594BB70 c patris (0D96&000004/3338/80:B937): not found (111 ms) by skylink_ice (of 1 avail 1)
2011/11/10 12:53:53 B777EB70 r Error processing ecm for caid 0D96, srvid 13D3 (servicename: TV Barrandov) on reader skylink_ice.
2011/11/10 12:53:53 B594BB70 c patris (0D96&000004/13D3/80:324B): not found (113 ms) by skylink_ice (of 1 avail 1)

a ve sloupecku LB Value/ Reader je stale by not found (111ms)

[marian34]

Ja by som to tipol na

Kód: Vybrat vše

reshare = 0

v oscam.conf sekcia cccam....

PS:deprecated mod,pokial mozno,tak nepouzivat.V tomto rezime je odozva citacky(karty) dlhsia.

[patris007]

Takze stale nic, porad to pise by not found (110ms), viz obrazek:
http://imgupload.sk/viewer.php?file=413 ... 021794.gif

Ted mam pripojenyho jenom jednoho klienta, predtim jich bylo vic, takze karta by nemela byt pretizena.

prikladam stavajici konfiguraci:

oscam.conf

[global]
logfile = /tmp/oscam.log
cachedelay = 120
nice = -19
maxlogsize = 100
saveinithistory = 1

[monitor]
port = 988
nocrypt = 127.0.0.1,10.0.0.1
aulow = 30
hideclient_to = 0
monlevel = 4
appendchaninfo = 0

[cccam]
port = 12000
version = 2.1.3
updateinterval = 0
minimizecards = 0

[serial]
device = user2@/dev/ttyS0?delay=1&timeout=300

[webif]
httpport = 8888
httpuser = patris
httppwd = *****
httprefresh = 0
httpallowed = 0.0.0.0-255.255.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0
httpjsicons = 1

oscam.server

¨[reader]
label = skylink_ice
protocol = smartreader
device = 003:002
detect = cd
mhz = 500
cardmhz = 357
group = 1
emmcache = 1,2,3
audisabled = 0

oscam.services

[skylink_internal]
caid = 0D96
provid = 0,4,8,24,28
srvid = 3351,334D,332D,13BC,2331,2333,332C,3354,13AC,13AE,020A,13BD,1F47,13AD,2336,36F6,1F45,13A6,232D,2334,3352,13B4,3353,1F43,13B6,13B1,13B3,13B7,13B2,13B5,13C3,13C2,13AB,1F41,1F42,3338,232F,2330,1F44,2329,232B,333B,13A7,3334,07E9,13BA

oscam.user

[account]
user = monitor
pwd = monitor
monlevel = 4

[account]
user = patris
pwd = *****
group = 1
au = 1

pak mam v tom adresari uz jen soubor oscam.srvid. Vic uz nic.
Pro uplnost jeste log

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Thu Nov 10 14:32:38 2011
-------------------------------------------------------------------------------
2011/11/10 14:32:38 B78F76C0 s >> OSCam << cardserver started, version 1.10rc-svn, build #5954 (i586-pc-linux)
2011/11/10 14:32:38 B78F76C0 s version=1.10rc-svn, build #5954, system=i586-pc-linux, nice=-19
2011/11/10 14:32:38 B78F76C0 s client max. idle=120 sec, debug level=0
2011/11/10 14:32:38 B78F76C0 s max. logsize=100 Kb, loghistorysize=4096 bytes
2011/11/10 14:32:38 B78F76C0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2011/11/10 14:32:38 B78F76C0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2011/11/10 14:32:38 B78F76C0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2011/11/10 14:32:38 B78F76C0 s signal handling initialized (type=sysv)
2011/11/10 14:32:38 B78F76C0 s 269 service-id's loaded in 1ms
2011/11/10 14:32:38 B78F76C0 s can't open file "/usr/local/etc//oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2011/11/10 14:32:38 B78F76C0 s can't open file "/usr/local/etc//oscam.provid" (err=2 No such file or directory), no provids's loaded
2011/11/10 14:32:38 B78F76C0 s can't open file "/usr/local/etc//oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2011/11/10 14:32:38 B78F76C0 s monitor: initialized (fd=7, port=988)
2011/11/10 14:32:38 B78F76C0 s camd33: disabled
2011/11/10 14:32:38 B78F76C0 s camd35: disabled
2011/11/10 14:32:38 B78F76C0 s cs378x: disabled
2011/11/10 14:32:38 B78F76C0 s newcamd: disabled
2011/11/10 14:32:38 B78F76C0 s cccam: initialized (fd=8, port=12000, crypted)
2011/11/10 14:32:38 B78F76C0 s radegast: disabled
2011/11/10 14:32:38 B78F76C0 s http thread started
2011/11/10 14:32:38 B78F76C0 s creating thread for device 003:002
2011/11/10 14:32:38 B78F76C0 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/11/10 14:32:38 B78F76C0 s waiting for local card init
2011/11/10 14:32:38 B78DEB70 h HTTP Server listening on port 8888
2011/11/10 14:32:38 B78D2B70 r reader thread started (thread=B78D2B70, label=skylink_ice, device=003:002, detect=cd, mhz=500, cardmhz=357)
2011/11/10 14:32:38 B78D2B70 r Using 0x82 as endpoint for smartreader hardware detection
2011/11/10 14:32:38 B78D2B70 r Found smartreader device 003:002
2011/11/10 14:32:39 B78D2B70 r skylink_ice card detected
2011/11/10 14:32:40 B78D2B70 r ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2011/11/10 14:32:41 B78D2B70 r Maximum frequency for this card is formally 5 Mhz, clocking it to 4.80 Mhz
2011/11/10 14:32:42 B78D2B70 r [cryptoworks-reader] card detected
2011/11/10 14:32:42 B78D2B70 r [cryptoworks-reader] type: CryptoWorks
2011/11/10 14:32:42 B78D2B70 r type: CryptoWorks, caid: 0D96, ascii serial: ******, hex serial: *******
2011/11/10 14:32:42 B78D2B70 r issuer: CryptoWorks, id: 04, bios: v3, pin: unknown, mfid: 3F00
2011/11/10 14:32:42 B78D2B70 r providers: 4 (04,08,0C,10)
2011/11/10 14:32:42 B78D2B70 r found cardsystem cryptoworks
2011/11/10 14:32:42 B78D2B70 r provider: 1, id: 04, name: Operator: FFFF
2011/11/10 14:32:42 B78D2B70 r chid: 1389, date: 2011/11/09 - 2011/11/29, name: Product 1389
2011/11/10 14:32:42 B78D2B70 r chid: 138A, date: 2011/11/09 - 2011/11/29, name: Product 138A
2011/11/10 14:32:42 B78D2B70 r chid: 138B, date: 2011/11/09 - 2011/11/29, name: Product 138B
2011/11/10 14:32:42 B78D2B70 r provider: 2, id: 08, name: Operator: FFFF
2011/11/10 14:32:42 B78D2B70 r provider: 3, id: 0C, name: Operator: FFFF
2011/11/10 14:32:42 B78D2B70 r provider: 4, id: 10, name: Operator: FFFF
2011/11/10 14:32:42 B78D2B70 r [cryptoworks-reader] ready for requests
2011/11/10 14:32:43 B78F76C0 s init for all local cards done
2011/11/10 14:32:43 B78F76C0 s anti cascading disabled
2011/11/10 14:32:43 B64C4B70 c serial: initialized (auto@/dev/ttyS0)
2011/11/10 14:32:49 B5AC3B70 c encrypted cccam-client ***** granted (patris, au=auto (1 reader))
2011/11/10 14:32:52 B78D2B70 r Error processing ecm for caid 0D96, srvid 3338 (servicename: Prima COOL) on reader skylink_ice.
2011/11/10 14:32:52 B5AC3B70 c patris (0D96&000004/3338/80:DE0E): not found (125 ms) by skylink_ice (of 1 avail 1)

[rada]

Nevím, co znamená to serial, ale odstran to

[marian34]

Doporucujem testnut iny protokol(newcamd).V oscam.conf dopisat

Kód: Vybrat vše

 [newcamd]
... a tie ostatne prkotiny

a v konfigu cccamu na dreame dopisat nline

Kód: Vybrat vše

N: IP_adresa.....

[marian34]

Nevím, co znamená to serial, ale odstran to

To neviem ani ja,no z default konfigu by som to tipol na moznost sharovat s boxami bez LAN,cez rs232.

[jumbo]

Tak já to mám takto. Mám to na Ubuntu 10,10. ALIX 3D3.Je přiložená i binárka.

[patris007]

Dekuji vsem za pomoc, uz mi to jede. Vcera sem vypnul PC s Oscam serverem, ze to nejde.
Dnes sem ho zapnul a ono to uz funguje. Takze posledni z uprav byla, ze mi tam u uzivatele chybelo prirazeni do groupy.
Asi to na nej bylo nejak moc uprav najednou, ale server s Oscamem sem i vcera nekolikrat restartoval, protoze mam jen jednu ctecku a mel sem ji v jinem PC.
Kdyz totiz zapnu PC se serverem Oscamu bez vlozene ctecky, tak mi vubec webif oscamu nefunguje, ale asi to je normalni. Protoze uz neplanuji ctecku vytahovat, dal to neresim.

Jeste jednou diky za trpelivost se mnou