Bus 004 Device 004: ID 09c3:0013 ActivCard, Inc.

[Lumir.Jasny]

Ahojte, ako rozchodim citacku tohoto typu ako ma vyzerat [reader] v oscam.server?

takto to vyzera teraz ak dam v Oscam web interfacer polozku v menu "Readers" a "Scan USB".

Bus 004 Device 004: ID 09c3:0013 ActivCard, Inc.
iProduct 2 USB Reader V3
iSerial 0

prikaz v linuxe "dpkg --list | grep libusb"

ii libusb-0.1-4 2:0.1.12-12 userspace USB programming library
ii libusb-dev 2:0.1.12-12 userspace USB programming library development files

[ladan69]

Já ji mám takto na ICE
[reader]
label = ice
protocol = mouse
device = /dev/ttyUSB0
caid = 0D96
detect = none
mhz = 600
cardmhz = 357
ident = 0D96:000004
group = 1
emmcache = 1,3,2

[Lumir.Jasny]

dakujem za info, mal som to podobne len sa to odlisovalo v detect = none
mal som detect = CD, ale aj po zmene stale pise ERROR opening device /dev/ttyUSB0

[Lumir.Jasny]

ze by bola chyba tu:
no libusb 1.0 found. No smartreader support

[ladan69]

kdo ti kompiloval oscam,je kompilovaný s libusb support

[Lumir.Jasny]

to neviem kto ho kompiloval bo tomu nerozumiem. Pouzival som prikazy cmake a make.

som lama, mam stary linux takze neviem nainstalovat jednoducho cez apt-get install libusb" a libusb dev tak som dnes nainstaloval novsi linux ktory sa dostane na svoj repozitory, teraz hladam nejaky navod na instalaciu oscamu a potrebnych balickov a aj kompilaciu aby som nic nepokazil. A ked pokazim preinstalujem cele znovu a idem na cisto.

[Lumir.Jasny]

tak na novsom linuxe to vyzera lepsie pri instalacii kompilacii ci co je to to pyse toto:

Utils: static libusb 1.0 found : /usr/local/lib/libusb-1.0.a . Adding smartreader support


ale aj tak niejde pise toto:
85573D8 r ERROR opening device /dev/ttyUSB0
2011/11/16 19:02:37 85573D8 r Cannot open device: /dev/ttyUSB0

[Lumir.Jasny]

skusam pouzit prikaz dir aby som zistil ci mam "/dev/ttyUSB0
"
dir /dev/ttyU*
dir: cannot access /dev/ttyU*: No such file or directory

nemam, hmmm co teraz

[ladan69]

poslal sem ti sz - koukni do dev jako co se hlásí - jestli je to usb nebo nějaký omnikey co používá pcsc

[marmik]

Návod na oscam do ubuntu.
http://www.sat-television.com/showthrea ... -to-UBUNTU

[Lumir.Jasny]

dmesg | grep tty
vypise:
[ 0.000000] console [tty0] enabled
ale ziadny ttyUSB0

idem studovat manual od marmika

[Lumir.Jasny]

co je to omnikey?

pri scane cez pcsc mi piste toto>
root:/etc/init.d# pcsc_scan
PC/SC device scanner
V 1.4.16 (c) 2001-2009, Ludovic Rousseau <ludovic.rousseau@free.fr>
Compiled with PC/SC lite version: 1.5.3
Scanning present readers...
0: ActivCard USB Reader 3.0 00 00

Wed Nov 16 21:34:39 2011
Reader 0: ActivCard USB Reader 3.0 00 00
Card state: Card inserted, Unresponsive card,

[michal47]

nechybí tam driver libccid ?

[Lumir.Jasny]

michal asi ano, ako si to vedel?

pouzil som navod s tadialto

http://www.eurocardsharing.com/f163/how ... ows-172736

a jedna z veci bolo aj libccid. Ta citacka uz asi funguje pcs_scan uz ju detekuje.

Aj oscam pise:

reader reader-3 initialized (device=0, detect=cd, mhz=357, cardmhz=357)
2011/11/16 22:50:04 93F5510 h HTTP Server listening on port 888
2011/11/16 22:50:05 0 reader-3 card detected


momentalne riesim tento problem ak je Ariva v menu tak je pripojena OK ak vyskocim v Arive z menu tak oscam napise>
WARNING: invalid client tcp_conn_close()

[Lumir.Jasny]

WARNING: invalid client tcp_conn_close()

CCCAM nema problemy z odpojovanim. Tak to zatial necham tak.

[Bruty]

vyborne,nabuduce nechaj aj adresu nielen serial...

[vprint]

Make sure you have a current make (debian package: build-essential) and cmake version (>= 2.6) installed. You furthermore need gcc, svn (debian package: subversion), libusb-dev (version 1.00, debian package: libusb-1.0-0-dev) and openssl (debian package: libssl-dev) installed. Consult the handbook of your linux distribution on how to install them if they are missing. Debian and Ubuntu for example uses "sudo apt-get install <package>" or "sudo aptitude install <package>".

[Lumir.Jasny]

Este otazecka mam dve citacky. Ako zmenim aby sa program identifikoval pod inym sifrovanim? Aby som bol presnejsi program sa predstavuje ako 0d03 a ja potrebujem aby si pytal kody od 0d96. Cize viem ho odkodovalen na 0d96 ale on stale chce tahat z 0d03

[michal47]

Konfigurace services, ale je možné že máš nějak špatně nakonfigurováno. Když nenajde na jedné,tak by měl zkusit hledat jinde.

[Lumir.Jasny]

2011/11/18 18:26:59 946BB68 c str1cek (0D03&000008/3330/A5:C494): rejected group (20 ms) (0 of 0) (no matching reader)
2011/11/18 18:26:59 9466068 c leb0 (0D96&000004/3330/80:142C): found (98 ms) by reader-3
2011/11/18 18:27:08 946BB68 c str1cek (0D03&000008/3330/A5:BA42): rejected group (20 ms) (0 of 0) (no matching reader)