podihuvodne timeouty

[jany]

Oscam 6033 postaveny na ubuntu dvojcitacka ZDK (karty 0D03 a 0D02)
Vsetko funguje vcelku dobre, ale za poslednych 4-5 dni som mal 2x ten sami problem
Z nicoho nic prestane 0D02 odpovedat klientom, resp. ecm time sa zvysia na hodnotu, kedy prestanu odpovedat (0D03 funguje aj ked 0D02 neodpoveda vid log).
Staci restart oscamu a casy su znova OK. Nema niekto podobny problem, alebo ako by som tento problem odstranil. 6033 uz pouzivam dost dlho a zatial tento problem nebol.

Kód: Vybrat vše

2012/02/11  8:12:45 B6623430 c client2 (0D02&0000A0/759A/84:99A6): found (203 ms) by upc_local  - CT 1
2012/02/11  8:12:45 B6614B10 c client3 (0D02&0000A0/759B/84:F6B0): found (407 ms) by upc_local  - Markiza TV
2012/02/11  8:12:45 B661EE40 c client4 (0D02&0000A0/759E/84:AFDA): found (360 ms) by upc_local  - TV Doma
2012/02/11  8:12:51 B6619100 c client6 (0D03&000008/07FB/9F:DA3E): found (192 ms) by skylink_full  - Hustler TV CZ
2012/02/11  8:12:55 B6614B10 c client3 (0D02&0000A0/759B/84:83E8): found (202 ms) by upc_local  - Markiza TV
2012/02/11  8:12:55 B6623430 c client2 (0D02&0000A0/759A/84:B81D): found (402 ms) by upc_local  - CT 1
2012/02/11  8:12:55 B661EE40 c client4 (0D02&0000A0/759E/84:0FF8): found (348 ms) by upc_local  - TV Doma
2012/02/11  8:13:01 B6619100 c client6 (0D03&000008/07FB/9F:BBF4): found (193 ms) by skylink_full  - Hustler TV CZ
2012/02/11  8:13:05 B6623430 c client2 (0D02&0000A0/759A/84:A494): found (202 ms) by upc_local  - CT 1
2012/02/11  8:13:05 B6614B10 c client3 (0D02&0000A0/759B/84:3174): found (405 ms) by upc_local  - Markiza TV
2012/02/11  8:13:05 B661EE40 c client4 (0D02&0000A0/759E/84:D187): found (353 ms) by upc_local  - TV Doma
2012/02/11  8:13:11 B6619100 c client6 (0D03&000008/07FB/9F:F714): found (191 ms) by skylink_full  - Hustler TV CZ
2012/02/11  8:13:15 B6623430 c client2 (0D02&0000A0/759A/84:D9DF): found (205 ms) by upc_local  - CT 1
2012/02/11  8:13:15 B6614B10 c client3 (0D02&0000A0/759B/84:12FD): found (407 ms) by upc_local  - Markiza TV
2012/02/11  8:13:15 B661EE40 c client4 (0D02&0000A0/759E/84:5533): found (354 ms) by upc_local  - TV Doma
2012/02/11  8:13:25 B6623430 c client2 (0D02&0000A0/759A/84:41CC): found (202 ms) by upc_local  - CT 1
2012/02/11  8:13:25 B6614B10 c client3 (0D02&0000A0/759B/84:E4D4): found (401 ms) by upc_local  - Markiza TV
2012/02/11  8:13:25 B661EE40 c client4 (0D02&0000A0/759E/84:1132): found (351 ms) by upc_local  - TV Doma
2012/02/11  8:13:28  90E3BA0 r Error processing ecm for caid 0D02, srvid 040A (servicename: 0D02:040A unknown) on reader upc_local.
2012/02/11  8:13:28 B660A7E0 c client6 (0D02&0000A0/040A/4C:288B): not found (2649 ms) by upc_local  - 0D02:040A unknown
2012/02/11  8:13:37  90E3BA0 r Error processing ecm for caid 0D02, srvid 759A (servicename: CT 1) on reader upc_local.
2012/02/11  8:13:37 B6623430 c client2 (0D02&0000A0/759A/84:FFA4): not found (2608 ms) by upc_local  - CT 1
2012/02/11  8:13:39 B6614B10 c client3 (0D02&0000A0/759B/84:2505): timeout (5001 ms)  - Markiza TV
2012/02/11  8:13:40  90E3BA0 r Error processing ecm for caid 0D02, srvid 759B (servicename: Markiza TV) on reader upc_local.
2012/02/11  8:13:40 B661EE40 c client4 (0D02&0000A0/759E/84:F160): timeout (5000 ms)  - TV Doma
2012/02/11  8:13:42  90E3BA0 r Error processing ecm for caid 0D02, srvid 759E (servicename: TV Doma) on reader upc_local.
2012/02/11  8:13:47  90E3BA0 r Error processing ecm for caid 0D02, srvid 759A (servicename: CT 1) on reader upc_local.
2012/02/11  8:13:47 B6623430 c client2 (0D02&0000A0/759A/84:DD45): not found (2611 ms) by upc_local  - CT 1
2012/02/11  8:13:50  90E3BA0 r Error processing ecm for caid 0D02, srvid 759B (servicename: Markiza TV) on reader upc_local.
2012/02/11  8:13:50 B6614B10 c client3 (0D02&0000A0/759B/84:7AE5): not found (3416 ms) by upc_local  - Markiza TV
2012/02/11  8:13:51 B661EE40 c client4 (0D02&0000A0/759E/84:A8EA): timeout (5000 ms)  - TV Doma
2012/02/11  8:13:52  90E3BA0 r Error processing ecm for caid 0D02, srvid 759E (servicename: TV Doma) on reader upc_local.
2012/02/11  8:13:57  90E3BA0 r Error processing ecm for caid 0D02, srvid 759A (servicename: CT 1) on reader upc_local.
2012/02/11  8:13:57 B6623430 c client2 (0D02&0000A0/759A/84:4D77): not found (2610 ms) by upc_local  - CT 1
2012/02/11  8:14:00  90E3BA0 r Error processing ecm for caid 0D02, srvid 759B (servicename: Markiza TV) on reader upc_local.
2012/02/11  8:14:00 B6614B10 c client3 (0D02&0000A0/759B/84:C124): not found (3115 ms) by upc_local  - Markiza TV
2012/02/11  8:14:01 B660EDD0 c client5 (0D02&0000A0/77EE/84:B16F): timeout (5000 ms)  - JimJam EMEA
2012/02/11  8:14:02  90E3BA0 r Error processing ecm for caid 0D02, srvid 77EE (servicename: JimJam EMEA) on reader upc_local.
2012/02/11  8:14:03 B661EE40 c client4 (0D02&0000A0/759E/84:D922): timeout (5000 ms)  - TV Doma
2012/02/11  8:14:05  90E3BA0 r Error processing ecm for caid 0D02, srvid 759E (servicename: TV Doma) on reader upc_local.
2012/02/11  8:14:07  90E3BA0 r Error processing ecm for caid 0D02, srvid 759A (servicename: CT 1) on reader upc_local.
2012/02/11  8:14:07 B6623430 c client2 (0D02&0000A0/759A/84:D7BA): not found (3040 ms) by upc_local  - CT 1
2012/02/11  8:14:10  90E3BA0 r Error processing ecm for caid 0D02, srvid 759B (servicename: Markiza TV) on reader upc_local.
2012/02/11  8:14:10 B6614B10 c client3 (0D02&0000A0/759B/84:386A): not found (3546 ms) by upc_local  - Markiza TV
2012/02/11  8:14:17  90E3BA0 r Error processing ecm for caid 0D02, srvid 759A (servicename: CT 1) on reader upc_local.
2012/02/11  8:14:17 B6623430 c client2 (0D02&0000A0/759A/84:100D): not found (2609 ms) by upc_local  - CT 1
2012/02/11  8:14:20  90E3BA0 r Error processing ecm for caid 0D02, srvid 759E (servicename: TV Doma) on reader upc_local.
2012/02/11  8:14:20 B661EE40 c client4 (0D02&0000A0/759E/84:121D): not found (4968 ms) by upc_local  - TV Doma
2012/02/11  8:14:22 B6614B10 c client3 (0D02&0000A0/759B/84:3B85): timeout (5001 ms)  - Markiza TV
.........
.........
2012/02/11  8:24:26  90E3BA0 r Error processing ecm for caid 0D02, srvid 766A (servicename: Prima Love) on reader upc_local.
2012/02/11  8:24:28 B6619100 c client6 (0D03&000004/13EF/A5:C39F): found (187 ms) by skylink_full  - Markiza TV
2012/02/11  8:24:28  90E3BA0 r Error processing ecm for caid 0D02, srvid 759D (servicename: Prima TV) on reader upc_local.
2012/02/11  8:24:28 B6607910 c client3 (0D02&0000A0/759D/84:26E1): not found (3671 ms) by upc_local  - Prima TV
2012/02/11  8:24:31  90E3BA0 r Error processing ecm for caid 0D02, srvid 759E (servicename: TV Doma) on reader upc_local.
2012/02/11  8:24:31 B661EE40 c client4 (0D02&0000A0/759E/84:00B2): not found (3565 ms) by upc_local  - TV Doma
2012/02/11  8:24:35  90E3BA0 r Error processing ecm for caid 0D02, srvid 0CD0 (servicename: 0D02:0CD0 unknown) on reader upc_local.
2012/02/11  8:24:35 B660EDD0 c client5 (0D02&0000A0/0CD0/92:0CFF): not found (2611 ms) by upc_local  - 0D02:0CD0 unknown
2012/02/11  8:24:35 B6619100 c client6 (0D03&000004/13EF/A5:AD14): found (188 ms) by skylink_full  - Markiza TV
2012/02/11  8:24:37  90E3BA0 r Error processing ecm for caid 0D02, srvid 759D (servicename: Prima TV) on reader upc_local.
2012/02/11  8:24:37 B6607910 c client3 (0D02&0000A0/759D/84:95A0): not found (2611 ms) by upc_local  - Prima TV
2012/02/11  8:24:39 B6619100 c client6 (0D03&000004/13F1/A5:CAF5): found (188 ms) by skylink_full  - Jednotka

[rada]

Karta UPC je pomalá, a ty ji máš tuším na 3,57Mhz. Pokud ji zahltíš moc dotazy, časem "odumře" a je třeba vypnout a znovu zapnout čtečku v oscamu, pouze restart nepomůže. Dále by ti pomohlo přepnout na 6Mhz a zapnout loadbalancer

[jany]

Praveze ju mam na 6Mhz, loadbalancer ale nepouzivam, az tak moc klientov tam zas neni (podla logu tam v tom case bolo do 5 klientov (0D03 je tak isto pomala ako 0D02 a nej som mal najviac cca 20 klientov a v pohode)).
Dal som teraz 6379 a uvidim ci to zacne po case robit (ak sa to bude opakovat, tak asi bude potrebne pouzit nejaky script na pravidelny restart oscamu)

[rada]

Dle tvých odezev bych nevěřil, že máš 6Mhz. 6379 ti bude často padat, já používám 6363 nebo 6343. Odezva na 6mhz by měla být okolo 220ms max, ty se blížíš k půl sekundě.

Vidíš odezvy 0D03? Je mnohem rychlejší

[joe6pack]

mal som obdobne problemy s novsimi verziami oscamu (1.2 unstable); skompiloval som 1.10rc-svn build #6089 a o odvtedy pokoj

[jany]

Dle tvých odezev bych nevěřil, že máš 6Mhz. 6379 ti bude často padat, já používám 6363 nebo 6343. Odezva na 6mhz by měla být okolo 220ms max, ty se blížíš k půl sekundě.

Vidíš odezvy 0D03? Je mnohem rychlejší

samozrejme, ze mam obidva karty na 6Mhz (predtym som to mal na 3,57Mhz a ecm boli cca 330ms).
Po urcitom case som zacal mat problem, ze ak klient vyzadoval ecm z rovnakeho TP z ktoreho uz je jeden kanal dekodovany, tak cas narastol dvojnasobne (cize ak klienti sleduju 3-4 rozne kanaly z jedneho TP, tak cas je 600-800ms (ak som mal na 3,57Mhz, tak casy boli 900-1200ms)). Toto sa mi ale nijak nepodarilo vyriesit ani zmenou binarky ani nijak inak.
Ok skusim este 1.10RC

vid ecm styroch kanalov na jednom TP

Kód: Vybrat vše

2012/02/13 13:01:41 B0E65B70 c client2 (0D02&0000A0/759B/84:3393): found (202 ms) by upc_local (of 1 avail 1) - Markiza TV
2012/02/13 13:01:42 B0DF9B70 c client4 (0D02&0000A0/7596/84:AA88): found (381 ms) by upc_local (of 5 avail 5) - Nova Cinema 
2012/02/13 13:01:42 B0EADB70 c client1 (0D02&0000A0/759E/84:0134): found (571 ms) by upc_local (of 1 avail 1) - TV Doma
2012/02/13 13:01:42 B0ED1B70 c client6 (0D02&0000A0/759F/84:1900): found (638 ms) by upc_local (of 1 avail 1) - Spektrum TV 

[Patrik1974]

Este velmi dolezita vec je z mojich skusenosti, ze aky klienti su na druhej strane servra. Mal som pripad, ze ked k oscamu boli pripojeny klienti ako azbox, ipbox a ine sracky s ich podivnymy Generic akoze protokolmy na baze newcamd tak sa diala taka vec ze sa strasne zvysovali casy presne co pises a oscam drbol...

[jany]

su to ip boxy a protocol cccamd

[marian34]

No jo,no,oscam.Kazdy den dve nove verzie a jedna "lepsia" ako druha.
Jednoznacne sa jedna o chybu oscamu.Vsimni si,cim to zacalo-z tvojho prveho vypisu.Dotazom na sid 040A(nejaky nezmysel),tam to caka nejakych 2,6s a potom to uz ide z kopca.Netvrdim,ze to musi byt vzdy tak,ale asi tam niekde bude pes zakopany.
A k tym odozvam karty-tie su permanentné(+-5ms),v tvojom pripade nejakych cca 200ms.Je logicke,ze pokial sa stretnu povedzme dve poziadavky,tak jedna z nich caka.Takze to potom vyzera asi takto

Kód: Vybrat vše

found (407 ms)

no vedz,ze karta odpovedala vzdy za tych 200ms.Vsimni si casy,ked su odozvy väcsie...A mozno to ma suvis aj so spominanym jednym transp.

PS:esteze prisli nove karty,tie su ovela rychlejsie.

[Patrik1974]

su to ip boxy a protocol cccamd

Skus pre zmenu zmenit protokol na newcamd a klientov tiez.

A este zasadna otazka kolko mas kariet na jednu binarku?

[jany]

su to ip boxy a protocol cccamd

Skus pre zmenu zmenit protokol na newcamd a klientov tiez.

A este zasadna otazka kolko mas kariet na jednu binarku?

Teraz neviem na ktory moj problem odpovedas (ci ten prvy, ked karta prestala celkom odpovedat, alebo ten druhy, kedy sa zvysuje cas odpovede), predpokladam, ze na ten druhy: Skusal som uz vselico, newcamd aj cccamd, je to na i686, ale testoval som to aj na SH4 a nepomohlo to.
Mam k dispozicii zalohy configov a binariek s pred xx mesiacov (vzdy si robim zalohy ak nieco stabilne ide a nieco updatujem) vracal som sa s5 k starym zaloham configov a binariek, ked to islo v poriadku, ale nepomohli ani stare dobre zalohy, tie casy sa stale zvysia (co klient to nasobok (samozrejme ako som pisal, len v ramci TP (ak by som mal 10 klientov a kazdy bere kanal z ineho TP, tak ecm je cca 200ms u kazdeho))).
Vychadza mi to len tak, ze nieco sa zmenilo u upc, inak si to neviem vysvetlit.

ked k oscamu boli pripojeny klienti ako azbox, ipbox a ine sracky s ich podivnymy Generic akoze protokolmy na baze newcamd tak sa diala taka vec ze sa strasne zvysovali casy presne co pises a oscam drbol...

preco si myslis, ze ip box je sracka ? Urcite si sa pomylil a chcel si napisat nieco ine (pretoze ip boxy, pouzivaju rovnake pluginy ako DM)

[Patrik1974]

su to ip boxy a protocol cccamd

Skus pre zmenu zmenit protokol na newcamd a klientov tiez.

A este zasadna otazka kolko mas kariet na jednu binarku?

Teraz neviem na ktory moj problem odpovedas (ci ten prvy, ked karta prestala celkom odpovedat, alebo ten druhy, kedy sa zvysuje cas odpovede), predpokladam, ze na ten druhy: Skusal som uz vselico, newcamd aj cccamd, je to na i686, ale testoval som to aj na SH4 a nepomohlo to.
Mam k dispozicii zalohy configov a binariek s pred xx mesiacov (vzdy si robim zalohy ak nieco stabilne ide a nieco updatujem) vracal som sa s5 k starym zaloham configov a binariek, ked to islo v poriadku, ale nepomohli ani stare dobre zalohy, tie casy sa stale zvysia (co klient to nasobok (samozrejme ako som pisal, len v ramci TP (ak by som mal 10 klientov a kazdy bere kanal z ineho TP, tak ecm je cca 200ms u kazdeho))).
Vychadza mi to len tak, ze nieco sa zmenilo u upc, inak si to neviem vysvetlit.

ked k oscamu boli pripojeny klienti ako azbox, ipbox a ine sracky s ich podivnymy Generic akoze protokolmy na baze newcamd tak sa diala taka vec ze sa strasne zvysovali casy presne co pises a oscam drbol...

preco si myslis, ze ip box je sracka ? Urcite si sa pomylil a chcel si napisat nieco ine (pretoze ip boxy, pouzivaju rovnake pluginy ako DM)

Pardon openbox som mal na mysli tak to potom neviem kde moze byt problem viem ja som mal takyto problem s nejakou verziou momentalne pouzivam 5876 tusim a mam vsetko ok.

[jany]

Takze po troch dnoch s OSCAM 1.10rc-svn build #6089 o5 timeout

[michal47]

Tak zkus ještě 5983.

[jany]

dobre, tak dal som na skusku OSCAM 1.10rc-svn build #5983

[Patrik1974]

J apouzivam OSCAM 1.10rc-svn build #5876 na linuxe pricom vzdy na jednu binarku max 3karty so smargom!!

[jozefk2007]

Ja som mal obdobny problem na dm800se a presiel som na newcs a mam svaty pokoj ludi kopec a ping stale okolo 100ms a to som presiel na server dm500s .

[jany]

S OSCAM 1.10rc-svn build #5983 to asi 5-6 dni slapalo a potreboval som urobit restart, nie oscamu, ale komplet PC som musel restartnut a potom to bezalo asi 1-2 dni a znova problem s timeoutom
Teraz skusam OSCAM 1.20-unstable_svn build #6445
Pri starte oscamu som v logu nasiel podozrive riadky. Moj oscam.srvid obsahuje viac ako 3000 poloziek. Je mozne, ze aj toto robi paseku. Skusim ich redukovat

Kód: Vybrat vše

2012/02/25  5:49:55 B77C86C0 s WARNING: You risk high CPU load and high ECM times with more than 2000 service-id´s!
2012/02/25  5:49:55 B77C86C0 s HINT: --> use optimized lists from http://streamboard.gmc.to/wiki/index.php/Srvid

[jumbo]

Já mám 6016 od marian34 odkaz zde http://www.ab-forum.info/viewtopic.php? ... art=40.Mám tam 1 0D96,1 0624 A 1 0D03 Vše šlape bezproblémů. 0D96 238 ms,0624 158 ms,0D03 400 ms
[reader]
label = skyiceHD
protocol = mouse
device = /dev/ttyUSB0
caid = 0D96
ident = 0D96:000004
detect = none
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
enable = 1
lb_weight = 100
deprecated = 1

[reader]
label = skyirdeto
protocol = mouse
device = /dev/ttyUSB1
fix9993 = 0
force_irdeto = 1
caid = 0624
ident = 0624:000000
detect = none
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,3,2
enable = 1
lb_weight = 100
deprecated = 1
boxkey = xxxxxxx
rsakey = xxxxxxxxxxxxxxxx

[reader]
label = sky0D03
protocol = mouse
device = /dev/ttyUSB3
caid = 0D03
ident = 0D03:000004,000008,000000
detect = none
mhz = 357
cardmhz = 357
group = 3
emmcache = 1,1,1
audisabled = 1
enable = 1
lb_weight = 100
deprecated = 1

[jany]

Ani 6445 nepomohol vydrzal cca 2 dni. Obavam sa, ze problem nebude v binarke, pretoze to robi na roznych. Zrejme bude pes zakopany niekde inde