Raspberry + oscam

[Dejvi_cz]

Já 12 testovacích. 130ms max.

[gusto1]

ta malina vyzera celkom OK, parametrovo je to tiez super, rozmyslam to vymenit za staru i686 s podobnymi parametrami, akurat pridem o HDD 120GB 2,5", ale supol by som tam aspon 8GB SD

[Spencer]

U mna malina mala priemer cca 280ms (smargo reader), starý klon DM500s cca 80ms.

[saturnin9]

Zdarvím, lze na oscam pro Raspberry připojit klienty z venku?

[gusto1]

Vie to linux, ak mas model s LAN, tak nevidim ziadny problem
btw skusal si to ?

[saturnin9]

zkoušel a pohořel. Ve vnitřní sítí perfektně, z venku nic. Překlad na routru je OK. Chtěl jsem nahradit PC s linuxem, kde to funguje.

[dj_banderas]

Chlapy mám argolis tripple reader a na nom odozvy niekedy až 1500ms. ako mám spravne nastaviť oscam.server aky protokol použiť?? hm?

[Duce]

Chlapy mám argolis tripple reader a na nom odozvy niekedy až 1500ms. ako mám spravne nastaviť oscam.server aky protokol použiť?? hm?

v provom rade AU maj povolené len od jedneho klienta tým sa určite zníži odozva, čo sa týka tej tvojej čítačky argolis neviem ako fuguje ale za tie peniaze by som radšej kúpil túto http://www.zebradem.com/wiki/index.php? ... Cardreader
tá je ďaleko lepšia na nastavenie

[vl@diik]

Zdravím , mam RPI model B a mne tam oscam bežal v pohode 24 h ale potom to začalu vždy mrznuť.
Viete potadiť ako nahrať nove jadro?
Viete niekto nahodiť sem ten skript ktorý kontroluje oscam ?

Diki
ps : zdroj mam 5V 1A

[dj_banderas]

Chlapy mám argolis tripple reader a na nom odozvy niekedy až 1500ms. ako mám spravne nastaviť oscam.server aky protokol použiť?? hm?

v provom rade AU maj povolené len od jedneho klienta tým sa určite zníži odozva, čo sa týka tej tvojej čítačky argolis neviem ako fuguje ale za tie peniaze by som radšej kúpil túto http://www.zebradem.com/wiki/index.php? ... Cardreader
tá je ďaleko lepšia na nastavenie

AU mám len seba alebo ani žiaden povolený ale odozvy su furt nanič..

[Duce]

AU mám len seba alebo ani žiaden povolený ale odozvy su furt nanič..[/quote]

A ako máš nastavenú čítačku?
Hod sem config.
ja mám čítačku nastavenú následovne, latencia cca 84ms
[reader]
label = skylink
enable = 1
protocol = mouse
device = /dev/ttyUSB0
caid = 0D96
detect = none
mhz = 600
group = 1
emmcache = 1,3,2

[dj_banderas]

[reader]
label = triple_1
protocol = mouse
device = /dev/ttyUSB0
pincode = 0000
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,1,2
deprecated = 1

atď

[dj_banderas]

Skušal som aj iný linux no pri jednom kliente je to 256ms stabilných.. aku máš čítačku?

[dj_banderas]

pomohlo by mi keby si mi nejak skopčil cely image z karty aby som vedel či nieje nanič čítačka.. vieš ho dať niekam na hellshare?

[Duce]

[reader]
label = triple_1
protocol = mouse
device = /dev/ttyUSB0
pincode = 0000
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,1,2
deprecated = 1

atď

prečo máš card mhz 600 to by si mal mať na ICE 357
čo sa týka mojej čítačky ja mám usb crystal venton+
image ti neskoppírujem lebo ja mám oscmam na asuse a nie na raspbery ale toto bude vecou nastavenia a samozrejme ak prehodíš Mhz na 600 v configu tak musíš aj fizicky na čítačke ak teda je tam na to prepínač ako na mojom ventone

toto je moje nastavenie čítačky v oscam server
[reader]
label = skylink
protocol = mouse
device = /dev/ttyUSB0
caid = 0D96
detect = none
mhz = 600
cardmhz = 357
group = 1
emmcache = 1,3,2

[dj_banderas]

Cardmhz som skušal všeliake som myslel že máš argolis. LUDIA KTO MA ARGOLIS??

[marecek29]

Abys vedel ze je to ctecka ma ...... tak si zkuz rozjet 0D0F nebo 0D03 a napis jak to dopadlo.

[dj_banderas]

nemam 0D0F ani 0D03 mam len 0D96

[dj_banderas]

Skúšam iný protokol:
toto tento setting s Tripple čítačkou:

[reader]
label = Triple1
protocol = smartreader
device = TripleP1;Serial:000007a0
pincode = 0000
caid = 0D96
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,1,2
deprecated = 1

2013/04/19 00:20:58 E08830 r Found reader with serial 000007a0 at 001:006
2013/04/19 00:20:58 E08830 r Found smartreader device Serial:000007a0
2013/04/19 00:20:58 E08830 r Triple1 [smartreader] Reader initialized (device=TripleP1;Serial:000007a0, detect=cd, mhz=600, cardmhz=600)
2013/04/19 00:20:59 E08830 r Triple1 [smartreader] card detected
2013/04/19 00:21:00 E08830 r Triple1 [smartreader] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2013/04/19 00:21:00 E08830 r Triple1 [smartreader] Init card protocol T0, FI=1, F=372, D=2, N=0
2013/04/19 00:21:00 E08830 r Triple1 [smartreader] Calculated work ETU is 62.00 us
2013/04/19 00:21:01 E08830 r Triple1 [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 6.00 Mhz (specified in reader->mhz)
2013/04/19 00:21:02 E08830 r Triple1 [smartreader] card detected
2013/04/19 00:21:02 E08830 r Triple1 [smartreader] type: CryptoWorks
2013/04/19 00:21:02 E08830 r Triple1 [smartreader] type: CryptoWorks, caid: 0D96, ascii serial: #########, hex serial: ##########
2013/04/19 00:21:02 E08830 r Triple1 [smartreader] issuer: CryptoWorks, id: 04, bios: v3, pin: unknown, mfid: 3F20
2013/04/19 00:21:02 E08830 r Triple1 [smartreader] providers: 4 (04,08,0C,10)
2013/04/19 00:21:02 E08830 r Triple1 [smartreader] disable pincode to card
2013/04/19 00:21:02 E08830 r Triple1 [smartreader] found card system cryptoworks
2013/04/19 00:21:02 E08830 r Triple1 [cryptoworks] provider: 1, id: 04, name: Operator: FFFF
2013/04/19 00:21:02 E08830 r Triple1 [cryptoworks] chid: FFD0, date: 2013/04/10 - 2013/05/10, name: Product FFD0
2013/04/19 00:21:03 E08830 r Triple1 [cryptoworks] chid: 03E9, date: 2013/04/14 - 2013/05/14, name: Product 03E9
2013/04/19 00:21:03 E08830 r Triple1 [cryptoworks] chid: 03EA, date: 2013/04/14 - 2013/05/14, name: Product 03EA
2013/04/19 00:21:03 E08830 r Triple1 [cryptoworks] chid: 03EB, date: 2013/04/15 - 2013/05/15, name: Product 03EB
2013/04/19 00:21:03 E08830 r Triple1 [cryptoworks] chid: 03EC, date: 2013/04/14 - 2013/05/14, name: Product 03EC
2013/04/19 00:21:03 E08830 r Triple1 [cryptoworks] chid: 03ED, date: 2013/04/15 - 2013/05/15, name: Product 03ED
2013/04/19 00:21:03 E08830 r Triple1 [cryptoworks] chid: 1772, date: 2013/04/14 - 2013/05/14, name: Product 1772
2013/04/19 00:21:03 E08830 r Triple1 [cryptoworks] chid: 7FFE, date: 2013/04/14 - 2013/05/14, name: Product 7FFE
2013/04/19 00:21:03 E08830 r Triple1 [cryptoworks] chid: 7FFD, date: 2013/04/15 - 2013/04/25, name: Product 7FFD
2013/04/19 00:21:03 E08830 r Triple1 [cryptoworks] chid: FFD8, date: 2013/04/14 - 2013/04/24, name: Product FFD8
2013/04/19 00:21:03 E08830 r Triple1 [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000
2013/04/19 00:21:03 E08830 r Triple1 [cryptoworks] provider: 2, id: 08, name: Operator: FFFF
2013/04/19 00:21:04 E08830 r Triple1 [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000
2013/04/19 00:21:04 E08830 r Triple1 [cryptoworks] provider: 3, id: 0C, name: Operator: FFFF
2013/04/19 00:21:04 E08830 r Triple1 [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000
2013/04/19 00:21:04 E08830 r Triple1 [cryptoworks] provider: 4, id: 10, name: Operator: FFFF
2013/04/19 00:21:04 E08830 r Triple1 [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000
2013/04/19 00:21:04 E08830 r Triple1 [cryptoworks] ready for requests
2013/04/19 00:21:05 E08830 r Triple1 [cryptoworks] card ejected
2013/04/19 00:21:05 0 s init for all local cards done
2013/04/19 00:21:05 0 s anti cascading disabled

Problem je že mi vždy načíta kartu a potom ju vyhodí "Card ejected" a koniec...

[dj_banderas]

Snáď najznámejšia čitačka Smargo smartreader+ (modra) s jedným slotom
oscam.server

[reader]
label = Smargo_blue
protocol = smartreader
device = Serial:12345678
pincode = 0000
smargopatch = 1
caid = 0D96
mhz = 480
group = 1

log

2013/04/19 00:24:43 E08A18 r Smargo_blue [smartreader] Reader initialized (device=Serial:12345678, detect=cd, mhz=480, cardmhz=357)
2013/04/19 00:24:44 E08A18 r Smargo_blue [smartreader] card detected
2013/04/19 00:24:46 E08A18 r Smargo_blue [smartreader] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2013/04/19 00:24:46 E08A18 r Smargo_blue [smartreader] Init card protocol T0, FI=1, F=372, D=2, N=0
2013/04/19 00:24:46 E08A18 r Smargo_blue [smartreader] Calculated work ETU is 38.75 us
2013/04/19 00:24:46 E08A18 r Smargo_blue [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 4.80 Mhz (specified in reader->mhz)
2013/04/19 00:24:47 E08A18 r Smargo_blue [smartreader] card detected
2013/04/19 00:24:47 E08A18 r Smargo_blue [smartreader] type: CryptoWorks
2013/04/19 00:24:47 E08A18 r Smargo_blue [smartreader] type: CryptoWorks, caid: 0D96, ascii serial: #########, hex serial: ##########
2013/04/19 00:24:48 E08A18 r Smargo_blue [smartreader] issuer: CryptoWorks, id: 04, bios: v3, pin: unknown, mfid: 3F00
2013/04/19 00:24:48 E08A18 r Smargo_blue [smartreader] providers: 4 (04,08,0C,10)
2013/04/19 00:24:48 E08A18 r Smargo_blue [smartreader] disable pincode to card
2013/04/19 00:24:48 E08A18 r Smargo_blue [smartreader] found card system cryptoworks
2013/04/19 00:24:48 E08A18 r Smargo_blue [cryptoworks] provider: 1, id: 04, name: Operator: FFFF
2013/04/19 00:24:48 E08A18 r Smargo_blue [cryptoworks] chid: FFD0, date: 2013/04/10 - 2013/05/10, name: Product FFD0
2013/04/19 00:24:48 E08A18 r Smargo_blue [cryptoworks] chid: 03E9, date: 2013/04/14 - 2013/05/14, name: Product 03E9
2013/04/19 00:24:48 E08A18 r Smargo_blue [cryptoworks] chid: 03EA, date: 2013/04/14 - 2013/05/14, name: Product 03EA
2013/04/19 00:24:48 E08A18 r Smargo_blue [cryptoworks] chid: 03EB, date: 2013/04/15 - 2013/05/15, name: Product 03EB
2013/04/19 00:24:48 E08A18 r Smargo_blue [cryptoworks] chid: 03EC, date: 2013/04/14 - 2013/05/14, name: Product 03EC
2013/04/19 00:24:48 E08A18 r Smargo_blue [cryptoworks] chid: 03ED, date: 2013/04/15 - 2013/05/15, name: Product 03ED
2013/04/19 00:24:48 E08A18 r Smargo_blue [cryptoworks] chid: 1772, date: 2013/04/14 - 2013/05/14, name: Product 1772
2013/04/19 00:24:48 E08A18 r Smargo_blue [cryptoworks] chid: 7FFE, date: 2013/04/14 - 2013/05/14, name: Product 7FFE
2013/04/19 00:24:48 E08A18 r Smargo_blue [cryptoworks] chid: 7FFD, date: 2013/04/15 - 2013/04/25, name: Product 7FFD
2013/04/19 00:24:48 E08A18 r Smargo_blue [cryptoworks] chid: FFD8, date: 2013/04/14 - 2013/04/24, name: Product FFD8
2013/04/19 00:24:48 E08A18 r Smargo_blue [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000
2013/04/19 00:24:48 E08A18 r Smargo_blue [cryptoworks] provider: 2, id: 08, name: Operator: FFFF
2013/04/19 00:24:48 E08A18 r Smargo_blue [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000
2013/04/19 00:24:48 E08A18 r Smargo_blue [cryptoworks] provider: 3, id: 0C, name: Operator: FFFF
2013/04/19 00:24:48 E08A18 r Smargo_blue [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000
2013/04/19 00:24:48 E08A18 r Smargo_blue [cryptoworks] provider: 4, id: 10, name: Operator: FFFF
2013/04/19 00:24:49 E08A18 r Smargo_blue [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000
2013/04/19 00:24:49 E08A18 r Smargo_blue [cryptoworks] ready for requests
2013/04/19 00:24:49 0 s init for all local cards done
2013/04/19 00:24:49 0 s anti cascading disabled

Prečo mi argolic vyhodí kartu?? Niekde som číta že treba patch na oscam. ne neuspešne patch je na stary oscam. ani s tým som nepochodil.

Nejaké nápady??