EMU

[petike]

vysel novy Wicard 1.15, funguje UPC

[ctse]

Naozaj. Vo WiCardd UPC beži. Klobúk dole.

[Luk]

Zdar, nahodu s opos kartou U*C nerozbeham? Diky

[EnoSat]

nahodou nie

[kreator120]

WiCard-115 BH FunCard for Black Hole.rar

[w.o.l.f.]

zdravím,
toto se dnes objevilo na najmsat.com náhodou jsem na to narazil, když jsem měnil kódy na Bulsatcom. Zkoušeli jste to někdo? Připadá mi to nějaké zmatené.

SkyLink Astra 3B @ 23.5° East 12207 V DVB-S2/8PSK MPEG-4 27500 5/6 DCW CaID 0624
NatGeo Wild HD KEY:4DFF17632F599C246539D16F98619790
SPORT1: CW: 90CAD22C0E1536590000000000000000
SPORT2 CW: 0000000000000000FC9F6803C468325E
DigiSport CW: B1EB1CB8000008080000000000000000

[EnoSat]

skus a uvidis

[w.o.l.f.]

hezké poledne,
funguje prosím někomu USRSC Europe na 10°E? Včera byla změna keys a mám v softcamkeys zadáno:
F 00031FFF 00 EBDD03CB05C0FEC3 ;USRSC(ESPN 10°E)
F 00031FFF 01 EBDD03CB05C0FEC3 ;USRSC(ESPN 10°E)
to ecm 1fff jsem vyčetl z ecminfo, kódy dodal z najmsat, ale přes mgcam mi program nechodí. NBA basket mi normálně jede. Musím něco změnit ještě třeba v mgf_cfg?
Dík za nakopnutí...

[EnoSat]

chodi ok
skontroluj si debug po prepnuti

[w.o.l.f.]

problém je v tom, že pokud zmáčknu ecm info tak vidím nějaký starý klíč ve tvaru ABCDEF67FEDCBA94. Ten aktuelní, ikdyž mám v softcam keys tak prostě nefunguje. Zkus mě ještě nakopnout jak a co změnit v debug, chtěl bych, aby hrály i ostatní programy z paketu nejen NBA Basket. Dík
mcam_cfg

Kód: Vybrat vše

# EMM messages
#    00 don't show any EMMs (default)
#    01 show only valid EMMs
#    02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
#    00 don't show anything about ecm
#    01 normal mode, show pids processed, decoded ecm and cw
#    02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
#    00 disable, no emm pids processed
#    01 enable, emm pids always processed for soft-au and shared cards
#    02 auto, emm started only if channel cant be decoded
#    03 process emm pids for network cards update only
A: { 02 }

# key update (sum 01 or 02 with 04)
#    01 update only new keys, default setting
#    02 update all keys (used for valid PMK checking)
#    04 enable TPS au
#    + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
#    00 files in /var/keys
#    01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
#    00 no network (default)
#    01 newcamd netclient
#    02 radegast netclient
#    04 camd3 netclient
#    08 gbox netclient
#    32	cccamd netclient, card list saved as /tmp/cccamd.info 
#    	(ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }

# network retry, use summ for several options
#    00 disable
#    01 retry every new ecm
#    02 try to connect to offline shares every Q: seconds
#    04 try to detect and fast reconnect to lost (and not used atm) server
#    + XX messages number and YY seconds to reconnect
#    mg will reconnect to server, if no answer to last XX ecm/keepalive or
#    if no answer for last ecm or keepalive sent for YY seconds
#    set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
#    00 No OSD (default)
#    01 neutrino
#    02 enigma
#    03 relook
#    + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
#    01 show emu ecm 
#    02 show network shares messages
#    04 show decoding failed / fta
#    08 show emm keys update
#    + web port to use for osd
S: { 03 } 80

# Log option, summ of:
#    00 off
#    01 network udp log
#    02 log to console
#    04 file, appended ! delete it by yourself, before it eat all your hdd
#    + IP udp-port log-file-name
L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value, 
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
#    00 Off (default)
#    01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
#    02 Ecm data cache, remember CW for (E:) time 
#    04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of: 
#    00 No (default)
#    01 reread config file on channel change (including priority and ignore, but not replace/cache)
#    02 reread SoftCam.Key on channel change
#    04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 06 }

# map all 180x nagra caids to 1801
# default is 01
F: { 00 }

[EnoSat]

L
02 log do konzoly (napr.telnet)
03 log do konzoly a zaroven do UDP portu na IP pocitaca
04 log do suboru

R
04 nacitanie klucov do pamete po zmene suboru

mgcamd ak najde v subore viac rovnakych SID+ECM (00031FFF) bere len prvy , ostatne ignoruje

[w.o.l.f.]

dik za vysvetleni jsem neco taketo tusil, config jsem neupravoval, jen odmazal biss nejakeho ukrajinskeho kanalu a jede to...

[EnoSat]

tak sa potom nemozes cudovat ked nesledujes co ti camd robi

[w.o.l.f.]

ja bohuzel nemam cas se v tom vrtat jako treba ostatni a studovat, jsem doma velmi velmi malo jen o vikendu a nekdy ani to ne, priorita je ze mi to bezi a muzu koukat, kazdy mame jine povolani a zajmy tak asi tak...

[masko52]

Tricolor TV (36*) EMU
ale len kanály na tychto transponderoch

11881
Dozhd,Top Shop TV,Rusong TV,Comedy TV,Russkaya Noch,Nochnoj Klub
REN TV,Teleinstruktor,Iskushenie,Raz TV,Tricolor TV promo,Shopping Live
Mir,TNT,Nano TV,

12190
TTS TV ,Dom Kino, Mnogo TV, Telekanal Zvezda
AutoPlus ,365 dnei TV ,Komediya TV ,Teen TV ,Ohotnik i Ribolov
Kanal Teleputeshestviya,

12226
Tricolor TV Infokanal ,Perviy kanal ,Rossiya 1
NTV ,Rossiya K ,Stil' i Moda ,Rossiya 2 ,Rossiya 24 ,5 Kanal (0h)
Peretz ,TV Sale ,Karusel ,TV Centr ,RU TV ,Nash Futbol,

12303
Bridge TV ,Indiya TV ,Kinopokaz ,Zoo TV ,Domashnij Telekanal ,STS ,You TV
Boets ,Tonus TV ,Podmoskov'e

http://www.lyngsat.com/packages/tricolor.html
funkčné vo wicard 1.16
neotestoval som nemám 36e a ked niekto testne nech dá vedieť výsledok

[ojoz]

Už asi týždeň neide xsport na 4W.Neviete,čo sa deje?
Ďakujem

[jano73]

Ide

[ojoz]

biss:1122336633221166-takto?

[EnoSat]

zalezi na pouzitom CAMd aky format to "zozere"

[vaskos]

30.06.2014 konci EMU na skylinku