Karta - RTVS (0668)

[Surtep]

Musel jsem restartovat OSCAM jinak to nefungovalo nebo aspon kartu.

radeji si dopis do services

[skylink_stv_ignore]
caid = 0D96
provid = 000004
srvid = 13F1,13F2,1329,132A

[klinec2]

Ja to mám nastavené takto v Oscame 10404 kde používam aj Skylink ICE kartu:
[reader]
label = towercom
protocol = internal
device = /dev/sci0
autospeed = 0
caid = 0668
boxkey = 1122334455667788
rsakey = AB722A8CAA9F58DE0D1CBB6FF329C961ED9DD759B103082D1BAE64C27A861D42E7F631891C2660EFA57484F80BBB4E0E8249A8368E31BD3FFC369FBE95160528
force_irdeto = 1
detect = cd
mhz = 305
group = 2
emmcache = 1,3,2

Zmenil som aj mhz na 600,boxkey na B1B2B3B4B5B6B7B8 dopísal som v dvbapi P: 0668 1 a aj tak to nejde stale vypisuje -
restarting decodingrequests after 5 ms with 1 enabled and 2 disabled ecmpids!
2015/05/08 21:34:52 514930 c (dvbapi) Demuxer #0 impossible to descramble PID #0 CAID 0668 PROVID 000000 ECMPID 146A PMTPID 138E (NO MATCHING READER)

[dreteam]

2bzuk

ak je klient oscam, tak by mohlo pomoct dopisat do oscam.dvbapi

Kód: Vybrat vše

I:0D96::1329                                                                    
I:0D96::13F1                                                                    
I:0D96::132A                                                                    
I:0D96::13F2                                                                    

[Surtep]

Ja to mám nastavené takto v Oscame 10404 kde používam aj Skylink ICE kartu:
[reader]
label = towercom
protocol = internal
device = /dev/sci0
autospeed = 0
caid = 0668
boxkey = 1122334455667788
rsakey = AB722A8CAA9F58DE0D1CBB6FF329C961ED9DD759B103082D1BAE64C27A861D42E7F631891C2660EFA57484F80BBB4E0E8249A8368E31BD3FFC369FBE95160528
force_irdeto = 1
detect = cd
mhz = 305
group = 2
emmcache = 1,3,2

Zmenil som aj mhz na 600,boxkey na B1B2B3B4B5B6B7B8 dopísal som v dvbapi P: 0668 1 a aj tak to nejde stale vypisuje -
restarting decodingrequests after 5 ms with 1 enabled and 2 disabled ecmpids!
2015/05/08 21:34:52 514930 c (dvbapi) Demuxer #0 impossible to descramble PID #0 CAID 0668 PROVID 000000 ECMPID 146A PMTPID 138E (NO MATCHING READER)

Tato verze oscam ti urcite nebude fungovat .

dej si posledni ta uz ma podporu pro karty 0668
zmen si jeste v nastaveni pro irdeto
mhz = 600

[DrCody]

Vypni Force Irdeto ...

caid = 0668
boxkey = B1B2B3B4B5B6B7B8
rsakey = AB722A8CAA9F58DE0D1CBB6FF329C961ED9DD759B103082D1BAE64C27A861D42E7F631891C2660EFA57484F80BBB4E0E8249A8368E31BD3FFC369FBE95160528
detect = cd
mhz = 600
cardmhz = 600
group = 5
emmcache = 1,3,2,0
blockemm-u = 1

[klinec2]

pre Surtep.:

a nestačí len dat druhu binárku ?

[klinec2]

Vypni Force Irdeto ...

to nepomôže,už som skúšal

[DrCody]

Vypni Force Irdeto ...

to nepomôže,už som skúšal

Ukaz config

[klinec2]

Vypni Force Irdeto ...

to nepomôže,už som skúšal

Ukaz config

zmenil som aj novu binarku

[reader]
label = towercom
protocol = internal
device = /dev/sci1
autospeed = 0
caid = 0668
boxkey = 1122334455667788
rsakey = AB722A8CAA9F58DE0D1CBB6FF329C961ED9DD759B103082D1BAE64C27A861D42E7F631891C2660EFA57484F80BBB4E0E8249A8368E31BD3FFC369FBE95160528
detect = cd
mhz = 305
cardmhz = 600
group = 5
emmcache = 1,3,2,0
blockemm-u = 1

[reader]
label = Skykarta
enable = 0
protocol = internal
device = /dev/sci0
autospeed = 0
caid = 0D96
force_irdeto = 1
needsemmfirst = 1
detect = cd
mhz = 305
group = 2,4
emmcache = 1,3,2,0

[DrCody]

Oprav si box key a mhz... vid vyssie v mojom komente

[zb1]

Keď ti po reštarte Oscamu vracia boxkey = 1122334455667788, tak vymaž záložné súbory s koncovkou bak z configu, znova nastav sprány boxkey, reštartuj Oscam a malo by to ísť.
Karta RTVS ide aj v starších verziách Oscamu, len v statuse čítačky píše no entitlements.

[klinec2]

Oprav si box key a mhz... vid vyssie v mojom komente

upravil ale stale píše karta ERROR pozri log hned pri spusteni:

015/05/09 14:48:44 0 s (net) cccam: initialized (fd=5, port=15000)
2015/05/09 14:48:44 0 s (reader) towercom [internal] creating thread for device /dev/sci1
2015/05/09 14:48:44 0 s (stat) loadbalancer: can't read from file /tmp/.oscam/stat
2015/05/09 14:48:44 0 s (main) waiting for local card init
2015/05/09 14:48:44 513C90 r (reader) towercom [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=600, cardmhz=600)
2015/05/09 14:48:44 513C90 r (reader) towercom [internal] Reader sci internal, detected box type: hs7919
2015/05/09 14:48:44 29800468 h (webif) webif: decompressed 159579 bytes back into 381416 bytes
2015/05/09 14:48:44 29800468 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
2015/05/09 14:48:45 513C90 r (reader) towercom [internal] card detected
2015/05/09 14:48:48 513C90 r (reader) towercom [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 20 56 36 2E 30 9E
2015/05/09 14:48:48 513C90 r (reader) towercom [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
2015/05/09 14:48:48 513C90 r (reader) towercom [internal] Calculated work ETU is 93.00 us reader mhz = 600
2015/05/09 14:48:48 513C90 r (reader) towercom [internal] Buffers readed 0 bytes total time_us 81077
2015/05/09 14:48:50 513C90 r (reader) towercom [internal] ATR Fsmax is 6 MHz, clocking card to 6.00 (specified in reader->mhz)
2015/05/09 14:48:51 513C90 r (reader) towercom [internal] detect irdeto card
2015/05/09 14:48:58 513C90 r (reader) towercom [internal] card system not supported
2015/05/09 14:48:58 513C90 r (reader) towercom [internal] Normal mode failed, reverting to Deprecated Mode
2015/05/09 14:49:02 513C90 r (reader) towercom [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 20 56 36 2E 30 9E
2015/05/09 14:49:02 513C90 r (reader) towercom [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
2015/05/09 14:49:02 513C90 r (reader) towercom [internal] Calculated work ETU is 62.00 us reader mhz = 600
2015/05/09 14:49:02 513C90 r (reader) towercom [internal] Buffers readed 0 bytes total time_us 79368
2015/05/09 14:49:04 513C90 r (reader) towercom [internal] ATR Fsmax is 5 MHz, clocking card to 6.00 (specified in reader->mhz)
2015/05/09 14:49:05 513C90 r (reader) towercom [internal] detect irdeto card

a potom :
015/05/09 14:51:47 514620 c (dvbapi) Demuxer 0 restarting decodingrequests after 4 ms with 1 enabled and 2 disabled ecmpids!
2015/05/09 14:51:47 514620 c (dvbapi) Demuxer 0 impossible to descramble PID 0 CAID 0668 PROVID 000000 ECMPID 1469 PMTPID 138D (NO MATCHING READER)
2015/05/09 14:51:47 514620 c (dvbapi) Demuxer 0 restarting decodingrequests after 5 ms with 1 enabled and 2 disabled ecmpids!
2015/05/09 14:51:47 514620 c (dvbapi) Demuxer 0 impossible to descramble PID 0 CAID 0668 PROVID 000000 ECMPID 1469 PMTPID 138D (NO MATCHING READER)

[klinec2]

Keď ti po reštarte Oscamu vracia boxkey = 1122334455667788, tak vymaž záložné súbory s koncovkou bak z configu, znova nastav sprány boxkey, reštartuj Oscam a malo by to ísť.
Karta RTVS ide aj v starších verziách Oscamu, len v statuse čítačky píše no entitlements.

Vymazal som ich a aj tak to píse a obraz nejde,inak kartu uz mam zaktivovanu na nelinuxovom prímači ,takže by mala hned ked sú dobré konfigy nabehnúť ! alebo tiez treba čakat zas na zapisy?

[zb1]

Ak sú na karte zápisy musí ísť hneď.
Máš v Users au 1 alebo názov čítačky (towercom) a správne group ?
Boxkey je už správny ?

[klinec2]

Ak sú na karte zápisy musí ísť hneď.
Máš v Users au 1 alebo názov čítačky (towercom) a správne group ?
Boxkey je už správny ?

user

caid = 0D96,0D02,0D00,0668,0100,1802,1803,1805,1810,1815,1830,1833,1834,1880,1882,0602,0B1C,0D97,0961,0B00,0B0F,0500,0963,098C,1702,4AEE,0B02,09C4
uniq = 1
suppresscmd08 = 0
umaxidle = 0
au = 1
emmreassembly = 0
betatunnel = 1834.FFFF:1722,1833.FFFF:1702
group = 1,2,3,4,5
cccmaxhops = 2
cccreshare = 1
cccignorereshare = 1
cccstealth = 1

BOXkey je uz spravny

[revis]

najskor si odstran problem s nacitanim karty , potom ries ci aj dekoduje.
ATR musi nacitat na prvy krat.

[klinec2]

najskor si odstran problem s nacitanim karty , potom ries ci aj dekoduje.
ATR musi nacitat na prvy krat.

a kde mam teda chybu?

[alfsvk]

Vypis hore...

2015/05/09 14:48:58 513C90 r (reader) towercom [internal] Normal mode failed, reverting to Deprecated Mode

[klinec2]

Vypis hore...

2015/05/09 14:48:58 513C90 r (reader) towercom [internal] Normal mode failed, reverting to Deprecated Mode

a ako to treba nastavit aby to šlapalo

[Surtep]

pre Surtep.:
a nestačí len dat druhu binárku ?

nevim co tim myslis .

2015/05/09 14:48:58 513C90 r (reader) towercom [internal] card system not supported
oscam je stary nepodporuje tvoji kartu -

????????? jakou mas verzy binarky ???????????????
????????? jaky pristroj ?????????????

dej sem celej log startu oscamu ne jen cast . priloz to jako soubor. .

nebo mi dej potrebny login a za 10 minut ti to chodi