Samsung TV a OSCAM client ?

[deep666]

ty si zase mudry jak radio ..... cital som to aj ja vsade len tu na abfore som sa docital ze to ide kompilovat cez toolchain ktory existuje ..... ci?
aj na plustelku si pisal ze v oscame nepojde a bam ide mi ..... a nikde som sa nic take nedocital az po mojich testoch to zacali riesit ludia

[deep666]

mam este jednu otazocku naco je vlastne tento alebo teda tieto 2 subory z tohoto archivu ktory je tu na fore??
samsung-dvbapi.rar
nikde som sa to docital

[vangelm]

Dekuji, tak sem si presne predstavoval spolupraci.

na UExxD6350 to slape je to super , jeste jednou dekuji za pomoc

toto hovor vies komu, ze Ti na D-ckovych verziach slape oscam - mam 8000-verziu a skusal som to hned s prvym patchom sammygo

tak za prve nejedna se o sammygo ale o SamyGo.To co si delal je opravdu k ....

1) musis udelat rooting podle navodu na:

http://wiki.samygo.tv/

2) pak si udelas vlastni kompilaci oscamu pomoci samsung-toolchain_cpu_ARM_v7(v71)
a) arm cpu jen pro LCD a LED
b) mips cpu plazma
Ty si mozna testoval kulove , tady mas návod a udelej to poradne najdi si TV pokud ji mas a udelej to znova nez zacne zase psat blbosti
http://opensource.samsung.com/

SAMSUNG HARDWARE 2011
----------------------------------------------
D550,D5000
MSTAR-X5
MIPS@600Mhz

PXD490,D550
MSTAR-X5
MIPS@600Mhz+Parma

D5500
MSTAR-X6
MIPS@600Mhz

PXD6XXX,D7XXX
MSTAR-X6
MIPS@600Mhz+Parma

LEXXD679,LNXXD630
Valencia (Cortex-A8@800Mhz)+Arsenal-WW


D6000,D6100,D6200...
GENOA-S (Cortex-A9@600Mhz)+Arsenal-WW

D6500...
GENOA-S (Cortex-A9@600Mhz)+Arsenal-WW+Parma



UA,UE-D7000,D8000
GENOA-P(Cortex-A8@800Mhz)+Arsenal-WW+Napoli


UN-D7000,D8000
GENOA-P(Cortex-A8@800Mhz)+Arsenal-WW+Napoli+SDP96(local dimming)

3) Potom pozadas chytre lidi o samsung_dvbapi ktery prekopirujes kam patri

Pak udelas male ale dulezite nastaveni v TV

A mas hotovo to cumis co
s bodem 2 a 3 sem potreboval pomoct jak se rika cesky hezky nakopnout

co je potreba udelat.

Jeste jednou dekuji za nakopnuti , nemyslim ty blbosti co jsou tady ve vlaknu

A mozes teda s 2 a 3 bodom nakopnut aj ty nas? Myslim, ze by ti bolo kopec ludi velmi vdacnych.

[miso7711]

staci rootnut tv pomocou samygo a kompilovat oscam s podporou samygo_dvbapi. Musi byt ale 100% toolchain

[vangelm]

A je tu nejaka dobra dusa, ktora by nam to tu uploadla skompilovane? Pripadne, mohol by niekto napisat podrobnejsi navod, ako to mozeme skompilovat aj s pouzitim dvbapi? Treba kompilovat priamo v TV alebo sa to da spravit aj na PC napr. v Ubuntu?
Vdaka.

[vangelm]

nie je to mstar, ale:

D6500
GENOA-S (Cortex-A9 @ 600Mhz) Arsenal-WW Parma

600 Eur za 32" telku podla mna nie je az tak malo...

A Surtep tvrdi, ze mu to na tejto telke funguje, myslis, ze si vymysla? Tomu neverim...

Inak, ked spustim v0.4 skompilovanu pre E/F tak mam takyto log:

Kód: Vybrat vše

-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Sun Sep 28 05:09:05 2014
-------------------------------------------------------------------------------
2014/09/28 05:09:05        0 s >> OSCam <<  cardserver started, version 1.20-unstable_svn, build r9755 (arm-v7a8v3r1-linux-gnueabi)
2014/09/28 05:09:05        0 s creating pidfile /dtv/oscam.pid with pid 795
2014/09/28 05:09:05        0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2014/09/28 05:09:05        0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/09/28 05:09:05        0 s signal handling initialized
2014/09/28 05:09:05        0 s 184 service-id's loaded in 4ms
2014/09/28 05:09:06    E4970 h webif: decompressed 147538 bytes back into 350456 bytes
2014/09/28 05:09:06    E4970 h HTTP Server running. ip=0.0.0.0 port=8887
2014/09/28 05:09:06        0 s Binary without Cardreader Support! No EMM processing possible!
2014/09/28 05:09:06        0 s miso [cccam] creating thread for device 192.168.2.1
2014/09/28 05:09:06    F1278 p 192.168.2.1: resolved ip=192.168.2.1
2014/09/28 05:09:06    F1278 p miso [cccam] connecting to 192.168.2.1:22222
2014/09/28 05:09:06        0 s miso_newcamd [newcamd] creating thread for device 192.168.2.1
2014/09/28 05:09:06    F4110 p proxy 192.168.2.1:22233 newcamd525 (fd=0)
2014/09/28 05:09:06    F4110 p miso_newcamd [newcamd] proxy initialized, server 192.168.2.1:22233
2014/09/28 05:09:06        0 s loadbalancer: can't read from file /mtd_rwcommon/oscam/stat
2014/09/28 05:09:06        0 s anti cascading disabled
2014/09/28 05:09:06    FD7C8 c plain dvbapi-client granted (jan, au=off)
2014/09/28 05:09:06    FD7C8 c Using SamyGO dvbapi v0.1
2014/09/28 05:09:06    FD7C8 c [DVBAPI] PMT6: Trying connect to enigma CA PMT listen socket...
2014/09/28 05:09:06    FD7C8 c [DVBAPI] PMT6 CA PMT Server connected on fd 7!
2014/09/28 05:09:06    F1278 p miso [cccam] proxy initialized, server 192.168.2.1:22222
2014/09/28 05:09:06    FD7C8 c [ADD PID 0] CAID: 0D96 ECM_PID: 0478 PROVID: 000000
2014/09/28 05:09:06    FD7C8 c [ADD PID 1] CAID: 0624 ECM_PID: 0482 PROVID: 000000
2014/09/28 05:09:06    FD7C8 c [ADD PID 2] CAID: 0666 ECM_PID: 048C PROVID: 000000
2014/09/28 05:09:06    FD7C8 c Found 3 ECMpids and 5 STREAMpids in PMT
2014/09/28 05:09:06    FD7C8 c [DVBAPI] Receiver wants to demux srvid 13F0 on adapter 0000 camask 0001 index 0000 pmtpid 0000
2014/09/28 05:09:06    FD7C8 c New program number: 13F0 (Doma) [pmt_list_management 3]
2014/09/28 05:09:06    FD7C8 c [DVBAPI] Demuxer #0 trying to descramble PID #0 CAID 0D96 PROVID 000000 ECMPID 0478 ANY CHID PMTPID 0000 VPID 03F6
2014/09/28 05:14:42    FD7C8 c [DVBAPI] Demuxer #0 continue decoding of SRVID 13F0
2014/09/28 05:14:42    FD7C8 c [SKIP STREAM 0] CAID: 0D96 ECM_PID: 0478 PROVID: 000000
2014/09/28 05:14:42    FD7C8 c [SKIP STREAM 1] CAID: 0624 ECM_PID: 0482 PROVID: 000000
2014/09/28 05:14:42    FD7C8 c Found 3 ECMpids and 4 STREAMpids in PMT
2014/09/28 05:14:42    FD7C8 c [DVBAPI] Receiver wants to demux srvid 13F0 on adapter 0000 camask 0001 index 0000 pmtpid 0000
2014/09/28 05:14:42    FD7C8 c New program number: 13F0 (Doma) [pmt_list_management 3]
2014/09/28 05:14:42    FD7C8 c [DVBAPI] Demuxer #0 continue decoding of SRVID 13F0
2014/09/28 05:14:42    FD7C8 c [SKIP STREAM 0] CAID: 0D96 ECM_PID: 0478 PROVID: 000000
2014/09/28 05:14:42    FD7C8 c [SKIP STREAM 1] CAID: 0624 ECM_PID: 0482 PROVID: 000000
2014/09/28 05:14:42    FD7C8 c [SKIP STREAM 2] CAID: 0666 ECM_PID: 048C PROVID: 000000
2014/09/28 05:14:42    FD7C8 c Found 3 ECMpids and 5 STREAMpids in PMT
2014/09/28 05:14:42    FD7C8 c [DVBAPI] Receiver wants to demux srvid 13F0 on adapter 0000 camask 0001 index 0000 pmtpid 0000
2014/09/28 05:14:42    FD7C8 c New program number: 13F0 (Doma) [pmt_list_management 3]
2014/09/28 05:20:40    FD7C8 c [DVBAPI] Demuxer #0 continue decoding of SRVID 13F0
2014/09/28 05:20:40    FD7C8 c [SKIP STREAM 0] CAID: 0D96 ECM_PID: 0478 PROVID: 000000
2014/09/28 05:20:40    FD7C8 c [SKIP STREAM 1] CAID: 0624 ECM_PID: 0482 PROVID: 000000
2014/09/28 05:20:40    FD7C8 c Found 3 ECMpids and 4 STREAMpids in PMT
2014/09/28 05:20:40    FD7C8 c [DVBAPI] Receiver wants to demux srvid 13F0 on adapter 0000 camask 0001 index 0000 pmtpid 0000
2014/09/28 05:20:40    FD7C8 c New program number: 13F0 (Doma) [pmt_list_management 3]
2014/09/28 05:20:40    FD7C8 c [DVBAPI] Demuxer #0 continue decoding of SRVID 13F0
2014/09/28 05:20:40    FD7C8 c [SKIP STREAM 0] CAID: 0D96 ECM_PID: 0478 PROVID: 000000
2014/09/28 05:20:40    FD7C8 c [SKIP STREAM 1] CAID: 0624 ECM_PID: 0482 PROVID: 000000
2014/09/28 05:20:40    FD7C8 c [SKIP STREAM 2] CAID: 0666 ECM_PID: 048C PROVID: 000000
2014/09/28 05:20:40    FD7C8 c Found 3 ECMpids and 5 STREAMpids in PMT
2014/09/28 05:20:40    FD7C8 c [DVBAPI] Receiver wants to demux srvid 13F0 on adapter 0000 camask 0001 index 0000 pmtpid 0000
2014/09/28 05:20:40    FD7C8 c New program number: 13F0 (Doma) [pmt_list_management 3]
2014/09/28 05:26:39    FD7C8 c [DVBAPI] Demuxer #0 continue decoding of SRVID 13F0
2014/09/28 05:26:39    FD7C8 c [SKIP STREAM 0] CAID: 0D96 ECM_PID: 0478 PROVID: 000000
2014/09/28 05:26:39    FD7C8 c [SKIP STREAM 1] CAID: 0624 ECM_PID: 0482 PROVID: 000000
2014/09/28 05:26:39    FD7C8 c Found 3 ECMpids and 4 STREAMpids in PMT
2014/09/28 05:26:39    FD7C8 c [DVBAPI] Receiver wants to demux srvid 13F0 on adapter 0000 camask 0001 index 0000 pmtpid 0000
2014/09/28 05:26:39    FD7C8 c New program number: 13F0 (Doma) [pmt_list_management 3]
2014/09/28 05:26:39    FD7C8 c [DVBAPI] Demuxer #0 continue decoding of SRVID 13F0
2014/09/28 05:26:39    FD7C8 c [SKIP STREAM 0] CAID: 0D96 ECM_PID: 0478 PROVID: 000000
2014/09/28 05:26:39    FD7C8 c [SKIP STREAM 1] CAID: 0624 ECM_PID: 0482 PROVID: 000000
2014/09/28 05:26:39    FD7C8 c [SKIP STREAM 2] CAID: 0666 ECM_PID: 048C PROVID: 000000
2014/09/28 05:26:39    FD7C8 c Found 3 ECMpids and 5 STREAMpids in PMT
2014/09/28 05:26:39    FD7C8 c [DVBAPI] Receiver wants to demux srvid 13F0 on adapter 0000 camask 0001 index 0000 pmtpid 0000
2014/09/28 05:26:39    FD7C8 c New program number: 13F0 (Doma) [pmt_list_management 3]
2014/09/28 05:32:37    FD7C8 c [DVBAPI] Demuxer #0 continue decoding of SRVID 13F0
2014/09/28 05:32:37    FD7C8 c [SKIP STREAM 0] CAID: 0D96 ECM_PID: 0478 PROVID: 000000
2014/09/28 05:32:37    FD7C8 c [SKIP STREAM 1] CAID: 0624 ECM_PID: 0482 PROVID: 000000
2014/09/28 05:32:37    FD7C8 c Found 3 ECMpids and 4 STREAMpids in PMT
2014/09/28 05:32:37    FD7C8 c [DVBAPI] Receiver wants to demux srvid 13F0 on adapter 0000 camask 0001 index 0000 pmtpid 0000
2014/09/28 05:32:37    FD7C8 c New program number: 13F0 (Doma) [pmt_list_management 3]
2014/09/28 05:32:37    FD7C8 c [DVBAPI] Demuxer #0 continue decoding of SRVID 13F0
2014/09/28 05:32:37    FD7C8 c [SKIP STREAM 0] CAID: 0D96 ECM_PID: 0478 PROVID: 000000
2014/09/28 05:32:37    FD7C8 c [SKIP STREAM 1] CAID: 0624 ECM_PID: 0482 PROVID: 000000
2014/09/28 05:32:37    FD7C8 c [SKIP STREAM 2] CAID: 0666 ECM_PID: 048C PROVID: 000000
2014/09/28 05:32:37    FD7C8 c Found 3 ECMpids and 5 STREAMpids in PMT
2014/09/28 05:32:37    FD7C8 c [DVBAPI] Receiver wants to demux srvid 13F0 on adapter 0000 camask 0001 index 0000 pmtpid 0000
2014/09/28 05:32:37    FD7C8 c New program number: 13F0 (Doma) [pmt_list_management 3]
2014/09/28 05:38:35    FD7C8 c [DVBAPI] Demuxer #0 continue decoding of SRVID 13F0
2014/09/28 05:38:35    FD7C8 c [SKIP STREAM 0] CAID: 0D96 ECM_PID: 0478 PROVID: 000000
2014/09/28 05:38:35    FD7C8 c [SKIP STREAM 1] CAID: 0624 ECM_PID: 0482 PROVID: 000000
2014/09/28 05:38:35    FD7C8 c Found 3 ECMpids and 4 STREAMpids in PMT
2014/09/28 05:38:35    FD7C8 c [DVBAPI] Receiver wants to demux srvid 13F0 on adapter 0000 camask 0001 index 0000 pmtpid 0000
2014/09/28 05:38:35    FD7C8 c New program number: 13F0 (Doma) [pmt_list_management 3]
2014/09/28 05:38:36    FD7C8 c [DVBAPI] Demuxer #0 continue decoding of SRVID 13F0
2014/09/28 05:38:36    FD7C8 c [SKIP STREAM 0] CAID: 0D96 ECM_PID: 0478 PROVID: 000000
2014/09/28 05:38:36    FD7C8 c [SKIP STREAM 1] CAID: 0624 ECM_PID: 0482 PROVID: 000000
2014/09/28 05:38:36    FD7C8 c [SKIP STREAM 2] CAID: 0666 ECM_PID: 048C PROVID: 000000
2014/09/28 05:38:36    FD7C8 c Found 3 ECMpids and 5 STREAMpids in PMT
2014/09/28 05:38:36    FD7C8 c [DVBAPI] Receiver wants to demux srvid 13F0 on adapter 0000 camask 0001 index 0000 pmtpid 0000
2014/09/28 05:38:36    FD7C8 c New program number: 13F0 (Doma) [pmt_list_management 3]
2014/09/28 05:44:34    FD7C8 c [DVBAPI] Demuxer #0 continue decoding of SRVID 13F0
2014/09/28 05:44:34    FD7C8 c [SKIP STREAM 0] CAID: 0D96 ECM_PID: 0478 PROVID: 000000
2014/09/28 05:44:34    FD7C8 c [SKIP STREAM 1] CAID: 0624 ECM_PID: 0482 PROVID: 000000
2014/09/28 05:44:34    FD7C8 c Found 3 ECMpids and 4 STREAMpids in PMT
2014/09/28 05:44:34    FD7C8 c [DVBAPI] Receiver wants to demux srvid 13F0 on adapter 0000 camask 0001 index 0000 pmtpid 0000
2014/09/28 05:44:34    FD7C8 c New program number: 13F0 (Doma) [pmt_list_management 3]
2014/09/28 05:44:34    FD7C8 c [DVBAPI] Demuxer #0 continue decoding of SRVID 13F0
2014/09/28 05:44:34    FD7C8 c [SKIP STREAM 0] CAID: 0D96 ECM_PID: 0478 PROVID: 000000
2014/09/28 05:44:34    FD7C8 c [SKIP STREAM 1] CAID: 0624 ECM_PID: 0482 PROVID: 000000
2014/09/28 05:44:34    FD7C8 c [SKIP STREAM 2] CAID: 0666 ECM_PID: 048C PROVID: 000000
2014/09/28 05:44:34    FD7C8 c Found 3 ECMpids and 5 STREAMpids in PMT
2014/09/28 05:44:34    FD7C8 c [DVBAPI] Receiver wants to demux srvid 13F0 on adapter 0000 camask 0001 index 0000 pmtpid 0000
2014/09/28 05:44:34    FD7C8 c New program number: 13F0 (Doma) [pmt_list_management 3]

Podla mna nie som velmi daleko od uspechu alebo ano?

[baldy]

si velmi daleko od uspechu!

[Surtep]

nie je to mstar, ale:

D6500
GENOA-S (Cortex-A9 @ 600Mhz) Arsenal-WW Parma

600 Eur za 32" telku podla mna nie je az tak malo...

A Surtep tvrdi, ze mu to na tejto telke funguje, myslis, ze si vymysla? Tomu neverim...

Inak, ked spustim v0.4 skompilovanu pre E/F tak mam takyto log:

Podla mna nie som velmi daleko od uspechu alebo ano?

Jestli si myslis ze spustis jen OSCAM na rootlem TV samsung tak si porad VEDLE .
Posilal jsem ti SZ (11.září 2014) kde sem Ty to napsal a pisu to jeste jednou SAMOTNY OSCAM nestaci !!!!!!!!!!!!!!!
Pokud to nechapes tak to radeji vzdej, nez aby si nekoho nebo nedej boze SURTEPa urazel.

[vangelm]

Surtep, v podstate vsetci, koho som sa doteraz na to pytal mi tvrdili, ze Oscam na D6540 nemam sancu rozbehat, ty si jediny clovek, ktory tvrdi, ze ti to na tomto modeli facha. A ja som napisal, ze neverim tomu, ze si vymyslas, takze som ta nechcel v ziadnom pripade urazat, prave naopak. Len by bolo fajn, keby si prezradil trosku viac ako sa ti podarilo to rozbehat, z toho navodu, ktory si tu dal to nie je vobec jasne a sam si pisal, ze si potreboval s 2. a 3. krokom pomoct, preto som ta poprosil, aby si pomohol aj ty mne... Takze si ochotny trosku mi s tym pomoct? Dik.

[Surtep]

jaky FW mas v TV ?
xxD65xx with T-GASDEUC_1027.0 firmware (priklad)

D6540xxxxx jake mas kodove oznaceni TV ?

uname -a ?

cat /proc/cpuinfo ?

[vangelm]

ahoj,

uname -a

Kód: Vybrat vše

Linux localhost 2.6.30.9 #128 PREEMPT Mon May 16 18:37:53 KST 2011 armv7l GNU/Linux

cat /proc/cpuinfo

Kód: Vybrat vše

Processor       : ARMv7 Processor rev 1 (v7l)
BogoMIPS        : 1196.03
Features        : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant     : 0x2
CPU part        : 0xc09
CPU revision    : 1

Hardware        : Samsung SDP1001 Evaluation board
Revision        : 0000
Serial          : 0000000000000000

Kodove oznacenie kuknem, ked budem pri TV, som mimo, ale viem sa dostat na moju siet, tak ak sa da to kodove oznacenie pozriet aj cez nejaky prikaz, tak mozem.

firmware by mal byt:
T-GASDEUC_001016

[miso7711]

hosi zajtra to skusim na mojej ue55d8000

[vangelm]

Super, tak potom daj prosim vediet, ako si dopadol, som zvedavy

[baldy]

posledna funkcna verzia oscam pre SamsungTV v prilohe. caka sa na novu verziu libOSCAM

[lachtan86]

Prosim nekamenujte me, funguje teda oscam na Déčkovejch samsungach nebo jen na E,F?? Co sem koukal na forum samygo tak tam psali ze neni problem na D rozjet oscam ale ze prej nedekoduje, tzn ze nefunguje ani z network sharu? Samygo uz mi nakej ten rok na tv bezi.. Diky ja jen jesi si s tim mam po nocich hrat.. S ženou je to jen na schvaleny vyluky jinak me k tv nepusti mam ue40d6530ws

Edit: prehledl sem tu to tema kde mi odpovidal vangelm ze oscam nedescrambluje takze sem smutnej

[baldy]

oscam pre vsetkych majitelov TV Samsung E/F/H s fw T-MST, viac info TU

[huli]

Jou, mozem potvrdit ze sa to da rozbehat. Vcera som to dal na F seriu televizie + oscam, v readeru mam sluzbu cardshare.cc takze totalna spokojnost. Kedze som root TV aj oscam riesil vo svojej rezii tak mi to zabralo "iba" 9 hodin.

Kompletny navod? Neexistuje, pocas prace som sa stretol s X problemami ktore niesu niekde riesene a je to vzdy dost individualne. ROOT TV je lepsie si zaplatit na samygo namiesto toho nefunkcneho z verejneho fora (odporucanie).

TV: Samsung UA46F6320

[igi_bat]

Jou, mozem potvrdit ze sa to da rozbehat. Vcera som to dal na F seriu televizie + oscam, v readeru mam sluzbu cardshare.cc takze totalna spokojnost. Kedze som root TV aj oscam riesil vo svojej rezii tak mi to zabralo "iba" 9 hodin.

Kompletny navod? Neexistuje, pocas prace som sa stretol s X problemami ktore niesu niekde riesene a je to vzdy dost individualne. ROOT TV je lepsie si zaplatit na samygo namiesto toho nefunkcneho z verejneho fora (odporucanie).

TV: Samsung UA46F6320

Ahoj

co myslis pod tym ROOT TV je lepsie si zaplatit na samygo? Ak sa to da, ako? Sorry, nenasiel som.

[igi_bat]

A ty ma ako poznas, clovece.

[igi_bat]

Len som sa pytal, kde najdem platenu sekciu. A uz som nemtavy... Neboj sa, nebude to ani prvy root v zivote ani prvy Oscam bez pomoci. Ani....