Raspberry + oscam

[amadeus]

Diky za odpoved.Mej se.

[iSLK]

Ahojte,
uz dlhsi cas sa snazim o spojazdnenie citacky+karty a stale ked dam kartu do citacky tak status je OFF (no entitlements) (skusal som Raspberry pi i Windows)

Viete mi poradit aky protokol mam pouzit a ako mam nastavit citacku (5V/3.3V, Smartmouse/Phenix, hodnotu Oscilatora ??)

lsusb vypise pri danom bus a devide :
Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC


Karta v prijimaci IPBox 99HD ide spolahlivo (Skylink 0D96)

citacka je to tato: http://www.monolithelec.com/smartmouse.html
kupil som ju tuto: http://www.aliexpress.com/item/2015-lat ... 4.6.c5Tt9Q

Dakujem

[1250125]

5V
Phoenix
crystal oscillator daj - 6.00MHz

[reader]
label = ICE_karta
protocol = mouse
device = /dev/ttyUSB0
caid = 0D96
detect = cd
mhz = 600
cardmhz = 369
group = 1
emmcache = 1,3,2

[iSLK]

Po nastaveni mam Live Log (OScam 11205) (po vlozeni karty stale status OFF)

2016/01/03 00:45:46 00000000 s (main) System name = Linux
2016/01/03 00:45:46 00000000 s (main) Host name = raspberrypi
2016/01/03 00:45:46 00000000 s (main) Release = 3.18.11-v7+
2016/01/03 00:45:46 00000000 s (main) Version = #781 SMP PREEMPT Tue Apr 21 18:07:59 BST 2015
2016/01/03 00:45:46 00000000 s (main) Machine = armv7l
2016/01/03 00:45:46 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 6518
2016/01/03 00:45:46 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2016/01/03 00:45:46 00000000 s (main) signal handling initialized
2016/01/03 00:45:46 00000000 s (reader) ICE_karta [mouse] creating thread for device /dev/ttyUSB0
2016/01/03 00:45:46 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2016/01/03 00:45:46 00000000 s (main) waiting for local card init
2016/01/03 00:45:46 3E65C462 h (webif) webif: decompressed 166120 bytes back into 395656 bytes
2016/01/03 00:45:46 3E65C462 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
2016/01/03 00:45:46 54DA139C r (reader) ICE_karta [mouse] Buffers readed 0 bytes total time_us 75186
2016/01/03 00:45:46 54DA139C r (reader) ICE_karta [mouse] Flush readed byte Nr 1 value 3b time_us 3482
2016/01/03 00:45:46 54DA139C r (reader) ICE_karta [mouse] Flush readed byte Nr 2 value 78 time_us 22254
2016/01/03 00:45:46 54DA139C r (reader) ICE_karta [mouse] Flush readed byte Nr 3 value 12 time_us 35
2016/01/03 00:45:46 54DA139C r (reader) ICE_karta [mouse] Flush readed byte Nr 4 value 00 time_us 1187
2016/01/03 00:45:46 54DA139C r (reader) ICE_karta [mouse] Flush readed byte Nr 5 value 00 time_us 32
2016/01/03 00:45:46 54DA139C r (reader) ICE_karta [mouse] Flush readed byte Nr 6 value 54 time_us 1204
2016/01/03 00:45:46 54DA139C r (reader) ICE_karta [mouse] Flush readed byte Nr 7 value c4 time_us 32
2016/01/03 00:45:46 54DA139C r (reader) ICE_karta [mouse] Flush readed byte Nr 8 value 03 time_us 1201
2016/01/03 00:45:46 54DA139C r (reader) ICE_karta [mouse] Flush readed byte Nr 9 value 00 time_us 54
2016/01/03 00:45:46 54DA139C r (reader) ICE_karta [mouse] Flush readed byte Nr 10 value 8f time_us 1260
2016/01/03 00:45:46 54DA139C r (reader) ICE_karta [mouse] Flush readed byte Nr 11 value f1 time_us 1299
2016/01/03 00:45:46 54DA139C r (reader) ICE_karta [mouse] Flush readed byte Nr 12 value 90 time_us 53
2016/01/03 00:45:46 54DA139C r (reader) ICE_karta [mouse] Flush readed byte Nr 13 value 00 time_us 31
2016/01/03 00:45:46 54DA139C r (reader) ICE_karta [mouse] Buffers readed 13 bytes total time_us 108259
2016/01/03 00:45:46 54DA139C r (reader) ICE_karta [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=369)
2016/01/03 00:45:47 00000000 s (main) init for all local cards done
2016/01/03 00:45:47 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2016/01/03 00:45:47 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2016/01/03 00:45:47 00000000 s (anticasc) anti cascading disabled

oscam.conf
[webif]
httpport = 8888
httpuser = root
httppwd = oscam
httpallowed = 100.100.1.1-100.100.1.255

oscam.user
[account]
user = jano
pwd = jano
group = 1
caid = 0D96
ident = 0D96:000004,000008

oscam.server
[reader]
label = ICE_karta
protocol = mouse
device = /dev/ttyUSB0
caid = 0D96
detect = cd
mhz = 600
cardmhz = 369
group = 1
emmcache = 1,3,2

[amadeus]

zkus cardmhz = 357
a ten conf máš nějak málo info.

[jaoco]

Po nastaveni mam Live Log (OScam 11205) (po vlozeni karty stale status OFF)



oscam.conf
[webif]
httpport = 8888
httpuser = root
httppwd = oscam
httpallowed = 100.100.1.1-100.100.1.255

oscam.user
[account]
user = jano
pwd = jano
group = 1
caid = 0D96
ident = 0D96:000004,000008
au =ICE_karta

oscam.server
[reader]
label = ICE_karta
protocol = mouse
device = /dev/ttyUSB0
caid = 0D96
detect = cd
mhz = 600
cardmhz = 369
group = 1
emmcache = 1,3,2

Jasne že to máš OFF keď nechceš aby bol ON.

[gusto1]

Vkladas kartu dobre ? cipom na kontakty v readery ?
Skusil by som sa este pohrat s detect

Kód: Vybrat vše

detect = cd
detect = none

[gusto1]

Po nastaveni mam Live Log (OScam 11205) (po vlozeni karty stale status OFF)

....
oscam.user
[account]
user = jano
pwd = jano
group = 1
caid = 0D96
ident = 0D96:000004,000008
au =ICE_karta

....

Jasne že to máš OFF keď nechceš aby bol ON.

sorry, ale co s tym ma au u usera ?

[jaoco]

sorry, ale co s tym ma au u usera ?

Sorry, jasné nečítam.
Tak len sa potom pohrať s readerom, všetky verzie mi takto fungujú:

[reader]
label = Mouse
protocol = mouse
device = /dev/ttyUSB0
detect = cd
group = 1
emmcache = 1,1,2,0

[reader]
label = Smargo
protocol = smargo
device = /dev/ttyUSB0
detect = cd
group = 1
emmcache = 1,1,2,0

[reader]
label = Smartreader
protocol = smartreader
device = 001:004
detect = cd
mhz = 961
cardmhz = 369
group = 1

[amadeus]

já to mám takto je jede perfektně

[reader]
label = reader_skylink
protocol = mouse
device = /dev/ttyUSB0
pincode = 0000
caid = 0D96
detect = none
mhz = 600
group = 1
emmcache = 1,3,2,0
cacheex = 1

[bzuk]

ak mas nejaky schopnejsi miltimeter rozober citacku a pomeraj napatie na nozickach slotu karty, ci je aj frekvencia na pine CLK, do pol hodky ked budem doma pridam obrazok co by si mal namerat

[iSLK]

Ahojte, dakujem vsetkym za rychle odpovede, uz sa mi to podarilo spojazdnit:

Nastavenie HW citacky:
Phoenix
5V
6Mhz crystal

oscam.conf
[webif]
httpport = 8888
httpuser = root
httppwd = oscam
httpallowed = 100.100.1.1-100.100.1.255

oscam.user
[account]
user = jano
pwd = jano
group = 1
caid = 0D96
ident = 0D96:000004,000008

oscam.server
[reader]
label = ICE_karta
protocol = mouse
device = /dev/ttyUSB0
caid = 0D96
detect = none
mhz = 600
cardmhz = 369
group = 1
emmcache = 1,3,2

vypis z Live Log (OScam 11205)
2016/01/03 09:50:18 00000000 s (main) System name = Linux
2016/01/03 09:50:18 00000000 s (main) Host name = raspberrypi
2016/01/03 09:50:18 00000000 s (main) Release = 3.18.11-v7+
2016/01/03 09:50:18 00000000 s (main) Version = #781 SMP PREEMPT Tue Apr 21 18:07:59 BST 2015
2016/01/03 09:50:18 00000000 s (main) Machine = armv7l
2016/01/03 09:50:18 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 5926
2016/01/03 09:50:18 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2016/01/03 09:50:18 00000000 s (main) signal handling initialized
2016/01/03 09:50:18 00000000 s (reader) ICE_karta [mouse] creating thread for device /dev/ttyUSB0
2016/01/03 09:50:18 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2016/01/03 09:50:18 00000000 s (main) waiting for local card init
2016/01/03 09:50:18 551FCF1E h (webif) webif: decompressed 166120 bytes back into 395656 bytes
2016/01/03 09:50:18 551FCF1E h (webif) HTTP Server running. ip=0.0.0.0 port=8888
2016/01/03 09:50:18 0AE56D01 r (reader) ICE_karta [mouse] Buffers readed 0 bytes total time_us 75192
2016/01/03 09:50:18 0AE56D01 r (reader) ICE_karta [mouse] Flush readed byte Nr 1 value 3b time_us 3975
2016/01/03 09:50:18 0AE56D01 r (reader) ICE_karta [mouse] Flush readed byte Nr 2 value 78 time_us 21378
2016/01/03 09:50:18 0AE56D01 r (reader) ICE_karta [mouse] Flush readed byte Nr 3 value 12 time_us 1296
2016/01/03 09:50:18 0AE56D01 r (reader) ICE_karta [mouse] Flush readed byte Nr 4 value 00 time_us 32
2016/01/03 09:50:18 0AE56D01 r (reader) ICE_karta [mouse] Flush readed byte Nr 5 value 00 time_us 1204
2016/01/03 09:50:18 0AE56D01 r (reader) ICE_karta [mouse] Flush readed byte Nr 6 value 54 time_us 33
2016/01/03 09:50:18 0AE56D01 r (reader) ICE_karta [mouse] Flush readed byte Nr 7 value c4 time_us 1298
2016/01/03 09:50:18 0AE56D01 r (reader) ICE_karta [mouse] Flush readed byte Nr 8 value 03 time_us 32
2016/01/03 09:50:18 0AE56D01 r (reader) ICE_karta [mouse] Flush readed byte Nr 9 value 00 time_us 1205
2016/01/03 09:50:18 0AE56D01 r (reader) ICE_karta [mouse] Flush readed byte Nr 10 value 8f time_us 66
2016/01/03 09:50:18 0AE56D01 r (reader) ICE_karta [mouse] Flush readed byte Nr 11 value f1 time_us 1269
2016/01/03 09:50:18 0AE56D01 r (reader) ICE_karta [mouse] Flush readed byte Nr 12 value 90 time_us 32
2016/01/03 09:50:18 0AE56D01 r (reader) ICE_karta [mouse] Flush readed byte Nr 13 value 00 time_us 1205
2016/01/03 09:50:18 0AE56D01 r (reader) ICE_karta [mouse] Buffers readed 13 bytes total time_us 109162
2016/01/03 09:50:18 0AE56D01 r (reader) ICE_karta [mouse] Reader initialized (device=/dev/ttyUSB0, detect=none, mhz=600, cardmhz=369)
2016/01/03 09:50:19 0AE56D01 r (reader) ICE_karta [mouse] card detected
2016/01/03 09:50:19 0AE56D01 r (reader) ICE_karta [mouse] Buffers readed 0 bytes total time_us 75147
2016/01/03 09:50:20 0AE56D01 r (reader) ICE_karta [mouse] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2016/01/03 09:50:20 0AE56D01 r (reader) ICE_karta [mouse] Buffers readed 0 bytes total time_us 75142
2016/01/03 09:50:20 0AE56D01 r (reader) ICE_karta [mouse] Init card protocol T0, FI=1, F=372, D=2, N=0
2016/01/03 09:50:20 0AE56D01 r (reader) ICE_karta [mouse] Setting baudrate to 19838 bps
2016/01/03 09:50:20 0AE56D01 r (reader) ICE_karta [mouse] Calculated work ETU is 31.00 us reader mhz = 600
2016/01/03 09:50:20 0AE56D01 r (reader) ICE_karta [mouse] Buffers readed 0 bytes total time_us 75134
2016/01/03 09:50:20 0AE56D01 r (reader) ICE_karta [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2016/01/03 09:50:21 0AE56D01 r (reader) ICE_karta [mouse] card detected
2016/01/03 09:50:21 0AE56D01 r (reader) ICE_karta [mouse] type: CryptoWorks
2016/01/03 09:50:21 0AE56D01 r (reader) ICE_karta [mouse] type: CryptoWorks, caid: 0D96, ascii serial: #########, hex serial: ##########
2016/01/03 09:50:22 0AE56D01 r (reader) ICE_karta [mouse] issuer: CryptoWorks, id: 04, bios: v3, pin: unknown, mfid: 3F00
2016/01/03 09:50:22 0AE56D01 r (reader) ICE_karta [mouse] providers: 4 (04,08,0C,10)
2016/01/03 09:50:22 0AE56D01 r (reader) ICE_karta [mouse] found card system cryptoworks
2016/01/03 09:50:22 0AE56D01 r (reader) ICE_karta [cryptoworks] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2016/01/03 09:50:22 0AE56D01 r (reader) ICE_karta [cryptoworks] provider: 1, id: 04, name: Operator: FFFF
2016/01/03 09:50:22 0AE56D01 r (reader) ICE_karta [cryptoworks] chid: FFD8, date: 2015/12/28 - 2016/01/27, name: Product FFD8
2016/01/03 09:50:22 0AE56D01 r (reader) ICE_karta [cryptoworks] chid: 03E9, date: 2015/12/28 - 2016/01/27, name: Product 03E9
2016/01/03 09:50:22 0AE56D01 r (reader) ICE_karta [cryptoworks] chid: 1772, date: 2015/12/28 - 2016/01/27, name: Product 1772
2016/01/03 09:50:22 0AE56D01 r (reader) ICE_karta [cryptoworks] chid: 7FFD, date: 2015/12/28 - 2016/01/07, name: Product 7FFD
2016/01/03 09:50:22 0AE56D01 r (reader) ICE_karta [cryptoworks] chid: 7FFE, date: 2015/12/26 - 2016/01/25, name: Product 7FFE
2016/01/03 09:50:22 0AE56D01 r (reader) ICE_karta [cryptoworks] chid: 7FFC, date: 2015/12/26 - 2016/01/25, name: Product 7FFC
2016/01/03 09:50:22 0AE56D01 r (reader) ICE_karta [cryptoworks] chid: FFB0, date: 2015/12/28 - 2016/01/27, name: Product FFB0
2016/01/03 09:50:22 0AE56D01 r (reader) ICE_karta [cryptoworks] chid: FFE0, date: 2015/12/28 - 2016/01/27, name: Product FFE0
2016/01/03 09:50:22 0AE56D01 r (reader) ICE_karta [cryptoworks] chid: 03EA, date: 2015/12/28 - 2016/01/27, name: Product 03EA
2016/01/03 09:50:22 0AE56D01 r (reader) ICE_karta [cryptoworks] chid: 03EC, date: 2015/12/28 - 2016/01/27, name: Product 03EC
2016/01/03 09:50:22 0AE56D01 r (reader) ICE_karta [cryptoworks] chid: 03ED, date: 2015/12/28 - 2016/01/27, name: Product 03ED
2016/01/03 09:50:22 0AE56D01 r (reader) ICE_karta [cryptoworks] chid: 03EB, date: 2015/12/28 - 2016/01/27, name: Product 03EB
2016/01/03 09:50:22 0AE56D01 r (reader) ICE_karta [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000
2016/01/03 09:50:22 0AE56D01 r (reader) ICE_karta [cryptoworks] provider: 2, id: 08, name: Operator: FFFF
2016/01/03 09:50:22 0AE56D01 r (reader) ICE_karta [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000
2016/01/03 09:50:22 0AE56D01 r (reader) ICE_karta [cryptoworks] provider: 3, id: 0C, name: Operator: FFFF
2016/01/03 09:50:22 0AE56D01 r (reader) ICE_karta [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000
2016/01/03 09:50:22 0AE56D01 r (reader) ICE_karta [cryptoworks] provider: 4, id: 10, name: Operator: FFFF
2016/01/03 09:50:22 0AE56D01 r (reader) ICE_karta [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000
2016/01/03 09:50:22 0AE56D01 r (reader) ICE_karta [cryptoworks] ready for requests
2016/01/03 09:50:23 00000000 s (main) init for all local cards done
2016/01/03 09:50:23 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2016/01/03 09:50:23 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2016/01/03 09:50:23 00000000 s (anticasc) anti cascading disabled

p.s. Skylink kartu je treba vlozit do citacky a potom dat restart OScamu

[bzuk]

no vidis bez karty to nefunguje ale vymazal by som si tu polozku cardmhz = 369, ak ju tam nemas tak je automaticky nastavene na 357, a ak by si pouzil RTVS kartu tak vtedy popises riadok cardmhz = 600 a este dalsie dva,

tu je zapojenie napajanie a frekvencie na slote karty, mozno sa to bude niekomu hodit ked nieco nebude fungovat, na meranie frekvencie potrebuje ale osciloskop alebo multimer ktory dokaze merat frekvenciu Hz, napatie odmerate s kazdym beznym multimetrom

[amadeus]

Tak hlavně že se povedlo.Ale po jakékoli změně udělej restart oscamu.

[iSLK]

Super schema bzuk, osciloscop mam na ceste Rigol 1054Z, tak potom dam nejake printsreens pre kontrolu, snad sa niekomu hodia.

[bzuk]

Super schema bzuk, osciloscop mam na ceste Rigol 1054Z, tak potom dam nejake printsreens pre kontrolu, snad sa niekomu hodia.

na tento rigol cakam aj ja maju dovolenku do 7.1., je super a da sa aj rozsirit na 100MHZ

[amadeus]

Chlapi,o cem je rec?Nejaka nova lepsi ctecka?V cem bude lepsi?

[bzuk]

Chlapi,o cem je rec?Nejaka nova lepsi ctecka?V cem bude lepsi?

nie je to citacka ale pristroj na meranie priebehov a inych veci pri vyvoji trebarz aj citaciek, zosilovacov, komunikacii rs232, atd

[amadeus]

Hmmm.

[iSLK]

Super schema bzuk, osciloscop mam na ceste Rigol 1054Z, tak potom dam nejake printsreens pre kontrolu, snad sa niekomu hodia.

na tento rigol cakam aj ja maju dovolenku do 7.1., je super a da sa aj rozsirit na 100MHZ

Ano mas absolutnu pravdu