Raspberry + oscam

[davidas]

zkus, nic na tom neni....

[spiderpp]

Po nastaveni mam Live Log (OScam 11205) (po vlozeni karty stale status OFF)

2016/01/03 00:45:46 00000000 s (main) System name = Linux
2016/01/03 00:45:46 00000000 s (main) Host name = raspberrypi
2016/01/03 00:45:46 00000000 s (main) Release = 3.18.11-v7+
2016/01/03 00:45:46 00000000 s (main) Version = #781 SMP PREEMPT Tue Apr 21 18:07:59 BST 2015
2016/01/03 00:45:46 00000000 s (main) Machine = armv7l
2016/01/03 00:45:46 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 6518
2016/01/03 00:45:46 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2016/01/03 00:45:46 00000000 s (main) signal handling initialized
2016/01/03 00:45:46 00000000 s (reader) ICE_karta [mouse] creating thread for device /dev/ttyUSB0
2016/01/03 00:45:46 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2016/01/03 00:45:46 00000000 s (main) waiting for local card init
2016/01/03 00:45:46 3E65C462 h (webif) webif: decompressed 166120 bytes back into 395656 bytes
2016/01/03 00:45:46 3E65C462 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
2016/01/03 00:45:46 54DA139C r (reader) ICE_karta [mouse] Buffers readed 0 bytes total time_us 75186
2016/01/03 00:45:46 54DA139C r (reader) ICE_karta [mouse] Flush readed byte Nr 1 value 3b time_us 3482
2016/01/03 00:45:46 54DA139C r (reader) ICE_karta [mouse] Flush readed byte Nr 2 value 78 time_us 22254
2016/01/03 00:45:46 54DA139C r (reader) ICE_karta [mouse] Flush readed byte Nr 3 value 12 time_us 35
2016/01/03 00:45:46 54DA139C r (reader) ICE_karta [mouse] Flush readed byte Nr 4 value 00 time_us 1187
2016/01/03 00:45:46 54DA139C r (reader) ICE_karta [mouse] Flush readed byte Nr 5 value 00 time_us 32
2016/01/03 00:45:46 54DA139C r (reader) ICE_karta [mouse] Flush readed byte Nr 6 value 54 time_us 1204
2016/01/03 00:45:46 54DA139C r (reader) ICE_karta [mouse] Flush readed byte Nr 7 value c4 time_us 32
2016/01/03 00:45:46 54DA139C r (reader) ICE_karta [mouse] Flush readed byte Nr 8 value 03 time_us 1201
2016/01/03 00:45:46 54DA139C r (reader) ICE_karta [mouse] Flush readed byte Nr 9 value 00 time_us 54
2016/01/03 00:45:46 54DA139C r (reader) ICE_karta [mouse] Flush readed byte Nr 10 value 8f time_us 1260
2016/01/03 00:45:46 54DA139C r (reader) ICE_karta [mouse] Flush readed byte Nr 11 value f1 time_us 1299
2016/01/03 00:45:46 54DA139C r (reader) ICE_karta [mouse] Flush readed byte Nr 12 value 90 time_us 53
2016/01/03 00:45:46 54DA139C r (reader) ICE_karta [mouse] Flush readed byte Nr 13 value 00 time_us 31
2016/01/03 00:45:46 54DA139C r (reader) ICE_karta [mouse] Buffers readed 13 bytes total time_us 108259
2016/01/03 00:45:46 54DA139C r (reader) ICE_karta [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=369)
2016/01/03 00:45:47 00000000 s (main) init for all local cards done
2016/01/03 00:45:47 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2016/01/03 00:45:47 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2016/01/03 00:45:47 00000000 s (anticasc) anti cascading disabled

oscam.conf
[webif]
httpport = 8888
httpuser = root
httppwd = oscam
httpallowed = 100.100.1.1-100.100.1.255

oscam.user
[account]
user = jano
pwd = jano
group = 1
caid = 0D96
ident = 0D96:000004,000008

oscam.server
[reader]
label = ICE_karta
protocol = mouse
device = /dev/ttyUSB0
caid = 0D96
detect = cd
mhz = 600
cardmhz = 369
group = 1
emmcache = 1,3,2

zdravim....asi mam ten isty problem a skusal som aj ine ako tu bolo pisane

2016/05/19 23:41:47 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r11232 (arm-linux-gnueabihf)
2016/05/19 23:41:47 00000000 s (main) System name = Linux
2016/05/19 23:41:47 00000000 s (main) Host name = orangepipc
2016/05/19 23:41:47 00000000 s (main) Release = 3.4.110-sun8i
2016/05/19 23:41:47 00000000 s (main) Version = #18 SMP PREEMPT Tue Mar 8 20:03:32 CET 2016
2016/05/19 23:41:47 00000000 s (main) Machine = armv7l
2016/05/19 23:41:47 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 1268
2016/05/19 23:41:47 00000000 s (config) services reloaded: 0 services freed, 4 services loaded, rejected 0
2016/05/19 23:41:47 00000000 s (config) userdb reloaded: accounts loaded, 0 expired, 0 disabled
2016/05/19 23:41:47 00000000 s (main) signal handling initialized
2016/05/19 23:41:47 00000000 s (config) 987 provid's loaded
2016/05/19 23:41:47 00000000 s (config) 7110 service-id's loaded in 46 ms
2016/05/19 23:41:47 00000000 s (config) WARNING: You risk high CPU load and high ECM times with more than 2000 service-id's!
2016/05/19 23:41:47 00000000 s (config) HINT: --> use optimized lists from http://www.streamboard.tv/wiki/Srvid
2016/05/19 23:41:47 00000000 s (config) 44 tier-id's loaded
2016/05/19 23:41:47 00000000 s (net) cs378x: initialized (fd=4, port=)
2016/05/19 23:41:47 00000000 s (net) newcamd: initialized (fd=5, port=)
2016/05/19 23:41:47 00000000 s (net) -> CAID: 0D96 PROVID: 000004
2016/05/19 23:41:47 00000000 s (net) newcamd: initialized (fd=6, port=)
2016/05/19 23:41:47 00000000 s (net) -> CAID: 0D97 PROVID: 000004
2016/05/19 23:41:47 00000000 s (net) cccam: initialized (fd=7, port=)
2016/05/19 23:41:47 00000000 s (main) Binary without Nagra module - no EMM processing for Nagra possible!
2016/05/19 23:41:47 00000000 s (main) Binary without NDS Videoguard module - no EMM processing for NDS Videoguard possible!
2016/05/19 23:41:47 00000000 s (main) Binary without DRE Crypt module - no EMM processing for DRE Crypt possible!
2016/05/19 23:41:47 00000000 s (main) Binary without TONGFANG module - no EMM processing for TONGFANG possible!
2016/05/19 23:41:47 00000000 s (main) Binary without Bulcrypt module - no EMM processing for Bulcrypt possible!
2016/05/19 23:41:47 00000000 s (main) Binary without Griffin module - no EMM processing for Griffin possible!
2016/05/19 23:41:47 00000000 s (main) Binary without DGCrypt module - no EMM processing for DGCrypt possible!
2016/05/19 23:41:47 00000000 s (reader) skylink_karta [mouse] creating thread for device /dev/ttyUSB0
2016/05/19 23:41:47 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2016/05/19 23:41:47 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2016/05/19 23:41:47 33FC6B23 h (webif) webif: decompressed 91724 bytes back into 241788 bytes
2016/05/19 23:41:47 33FC6B23 h (webif) HTTP Server running. ip=0.0.0.0 port=9855
2016/05/19 23:41:47 3FF0659F r (reader) skylink_karta [mouse] Buffers readed 0 bytes total time_us 75111
2016/05/19 23:41:47 3FF0659F r (reader) skylink_karta [mouse] Flush readed byte Nr 1 value 3b time_us 3039
2016/05/19 23:41:48 3FF0659F r (reader) skylink_karta [mouse] Flush readed byte Nr 2 value 78 time_us 21920
2016/05/19 23:41:48 3FF0659F r (reader) skylink_karta [mouse] Flush readed byte Nr 3 value 12 time_us 952
2016/05/19 23:41:48 3FF0659F r (reader) skylink_karta [mouse] Flush readed byte Nr 4 value 00 time_us 958
2016/05/19 23:41:48 3FF0659F r (reader) skylink_karta [mouse] Flush readed byte Nr 5 value 00 time_us 16
2016/05/19 23:41:48 3FF0659F r (reader) skylink_karta [mouse] Flush readed byte Nr 6 value 54 time_us 914
2016/05/19 23:41:48 3FF0659F r (reader) skylink_karta [mouse] Flush readed byte Nr 7 value c4 time_us 958
2016/05/19 23:41:48 3FF0659F r (reader) skylink_karta [mouse] Flush readed byte Nr 8 value 03 time_us 963
2016/05/19 23:41:48 3FF0659F r (reader) skylink_karta [mouse] Flush readed byte Nr 9 value 00 time_us 15
2016/05/19 23:41:48 3FF0659F r (reader) skylink_karta [mouse] Flush readed byte Nr 10 value 8f time_us 917
2016/05/19 23:41:48 3FF0659F r (reader) skylink_karta [mouse] Flush readed byte Nr 11 value f1 time_us 958
2016/05/19 23:41:48 3FF0659F r (reader) skylink_karta [mouse] Flush readed byte Nr 12 value 90 time_us 960
2016/05/19 23:41:48 3FF0659F r (reader) skylink_karta [mouse] Flush readed byte Nr 13 value 00 time_us 16
2016/05/19 23:41:48 3FF0659F r (reader) skylink_karta [mouse] Buffers readed 13 bytes total time_us 108209
2016/05/19 23:41:48 3FF0659F r (reader) skylink_karta [mouse] Reader initialized (device=/dev/ttyUSB0, detect=none, mhz=600, cardmhz=369)
2016/05/19 23:41:48 3FF0659F r (reader) skylink_karta [mouse] card detected
2016/05/19 23:41:48 3FF0659F r (reader) skylink_karta [mouse] Buffers readed 0 bytes total time_us 75144
2016/05/19 23:41:50 3FF0659F r (reader) skylink_karta [mouse] ATR: 3B xx xx xxx xx xx 00 8F F1 90 00
2016/05/19 23:41:50 3FF0659F r (reader) skylink_karta [mouse] Buffers readed 0 bytes total time_us 75175
2016/05/19 23:42:00 3FF0659F r (reader) skylink_karta [mouse] Init card protocol T0, FI=1, F=372, D=2, N=0
2016/05/19 23:42:00 3FF0659F r (reader) skylink_karta [mouse] Setting baudrate to 19838 bps
2016/05/19 23:42:00 3FF0659F r (reader) skylink_karta [mouse] Calculated work ETU is 31.00 us reader mhz = 600
2016/05/19 23:42:00 3FF0659F r (reader) skylink_karta [mouse] Buffers readed 0 bytes total time_us 75146
2016/05/19 23:42:00 3FF0659F r (reader) skylink_karta [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2016/05/19 23:42:01 3FF0659F r (reader) skylink_karta [mouse] card detected
2016/05/19 23:42:01 3FF0659F r (reader) skylink_karta [mouse] type: CryptoWorks
2016/05/19 23:42:21 3FF0659F r (reader) skylink_karta [mouse] card system not supported
2016/05/19 23:42:21 3FF0659F r (reader) skylink_karta [mouse] Normal mode failed, reverting to Deprecated Mode
2016/05/19 23:42:21 3FF0659F r (reader) skylink_karta [mouse] Buffers readed 0 bytes total time_us 75157
2016/05/19 23:42:22 3FF0659F r (reader) skylink_karta [mouse] ATR: 3B xx xx xx xx xx xx 03 00 8F F1 90 00
2016/05/19 23:42:22 3FF0659F r (reader) skylink_karta [mouse] Init card protocol T0, FI=1, F=372, D=2, N=0
2016/05/19 23:42:22 3FF0659F r (reader) skylink_karta [mouse] Calculated work ETU is 62.00 us reader mhz = 600
2016/05/19 23:42:22 3FF0659F r (reader) skylink_karta [mouse] Buffers readed 0 bytes total time_us 75142
2016/05/19 23:42:22 3FF0659F r (reader) skylink_karta [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2016/05/19 23:42:23 3FF0659F r (reader) skylink_karta [mouse] card detected
2016/05/19 23:42:23 3FF0659F r (reader) skylink_karta [mouse] type: CryptoWorks
2016/05/19 23:42:43 3FF0659F r (reader) skylink_karta [mouse] card system not supported
2016/05/19 23:42:43 3FF0659F r (reader) skylink_karta [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2016/05/19 23:42:43 3FF0659F r (reader) skylink_karta [mouse] card initializing error

skusal som aj to co tu bolo popisane a nic.

[amadeus]

Já jsem instaloval server na raspberry cca 3x s přiloženého postupu a vždy fungoval.Vše je o nastavení čtečky,správné frekvence a umístění usb.Zkus můj postup a uvidíš.

u serveru mám toto:
[reader]
label = reader_skylink
protocol = mouse
device = /dev/ttyUSB0
pincode = 0000
caid = 0D96
detect = none
mhz = 600
group = 1
emmcache = 1,3,2

a config toto:
[global]
logfile = stdout
nice = -1
usrfile = /home/pi/oscam-svn/oscamuser.log
cwlogdir = /home/pi/oscam-svn/cwlogdir.log
emmlogdir = /home/pi/oscam-svn/emm.log

[cache]

[newcamd]
port = 16001@0D96:016001
key = 0102030405060708091011121314

[cccam]
port = 16000
nodeid = 60AA6208101A13D2
version = 2.1.4
reshare = 2

[monitor]
port = 989
nocrypt = 127.0.0.1,0.0.0.0-255.255.255.255
aulow = 120
monlevel = 4

[webif]
httpport = 8888
httpuser = admin
httppwd = root
httpallowed = 127.0.0.1,0.0.0.0-255.255.255.255
aulow = 120

Snad jsem pomohl.

[amadeus]

Ale funguje.Asi jsem to blbe zkopiroval.
[newcamd]
port = 16001@0D96:000004
key = 0102030405060708091011121314

Ale samozřejmě port si určíš ty sám.

[efendy55]

hm , však to malé čudo funguje bezvadne ,aspon zatial ..

[gusto1]

Ale funguje.Asi jsem to blbe zkopiroval.
[newcamd]
port = 16001@0D96:000004
key = 0102030405060708091011121314

Ale samozřejmě port si určíš ty sám.

Nechapem ako sa da blbo skopirovat

[amadeus]

Ale funguje.Asi jsem to blbe zkopiroval.
[newcamd]
port = 16001@0D96:000004
key = 0102030405060708091011121314

Ale samozřejmě port si určíš ty sám.

Nechapem ako sa da blbo skopirovat

Tak se to ani nesnaz pochopit.

[reavis]

zdravim
chcel by som sa opytat ci k banane mozem pouzit citacku Phoenix a ci bude korektne chodit za predpokladu ze ju mam dobre nastavenu ? vdaka za info

[11chloe]

typnul bych si že ano

[efendy55]

mne zase neukazuje na karte žiadny zápis ,ale karta frčí ako s praku . ked som dal refresh karty 0D97 tak v live logu som krásne videl všetky zápisy dal refresh readers a opäť žiadny zápis a samozrejme karta frčí veselo dalej . stretli ste sa borci už s niečim takýmto ??? zápisy tam musia byť ale prečo mi ich neukazuje to už veru netuším , ani nikde na forach som sa o tomto nedočítal .

[dlhe_pole]

nanic oscam. bud to nejaka starina alebo nejaka patlanina

[efendy55]

je to 11233 .

[dlhe_pole]

vlastne kompilovana, alebo stiahnuta z nejakeho uploadu ?

[efendy55]

stiahol som ju s netu .http://anonymouse.org/cgi-bin/anon-www. ... /Raspberry

[dlhe_pole]

mas raspberry pi-čko tu v tomto threade jednoduchy navod ako si skompilovat vlastnu binarku a ty stahujes no name hotove binarky ? nebojis sa nejakeho backdooru, t.j ze sa ti tam bude logovat nejaky cudzopasnik ?

[reavis]

zdravim vas,
chcem sa opytat aky image je dobry na bpi m1 alebo link, skusal som jessie, ktory je aktualny na raspbery a vôbec nejde spustit.

[reavis]

skusal som kopec image a skoro vzdy mi to konci na chzbe jadra :
waiting for root device /dev/mmcblk0p2...
nevie niekto poradit ako dalej, vopred vdaka za radu

[revis]

to je sd karta - cosi s nou mas.

[dlhe_pole]

no doporucena je minimale class 8 ale ja pouzivam class 10. rychlejsie to bootuje pak

[reavis]

používam microSDHC/SDXC UHS-I U3 32GB v adapteri, v maline mi ide na tej istej xbmc , vyskusla som druhu ta co mi ide v maline a vyhadzuje to isté