Raspberry + oscam

[duri19]

To nepojde. 6mhz z gemalta nedostanes.
Ostatne ako protocol=pcsc a enable = 0 povazujem za preklepy.
Ak by sa ti to nahodou nejak podarilo, rad sa priucim.

gemalto som nevedel dat cez iny protokol ako pcsc : http://www.streamboard.tv/wiki/OSCam/en ... CSC_Reader ale to enable je preklep

Este raz: ty tam mas pscs miesto pcsc.
Osobne som sa dosť natrapil s rtvs v gemalto a problem je, ze pcsc lite nepodporuje nastavenie frekvencie a rtvs musi mat 6mhz. Ice karty v tom idu bez problemov ci uz ako irdeto alebo cw.
Tak pouzivam gemalto na pki login do firemnej siete a k zakaznikom ale keby sa v tom niekomu podarilo rozbehať, rad sa necham poučiť.

Aha, bez okuliarov som si to nevsimol. Jo malo tam byt ako pises pcsc

[STomko]

Ahojte. Pouzival som starsiu verziu oscam, ale nakolko sa mi pokazila karta, bol som nuteny znova nainstalovat oscam. Pouzivam nasledovnu verziu: OSCam: 1.20_svn Build: r11432 Compiler: arm-linux-gnueabihf

Avsak pozorujem, ze po nejakom case (niekolko hodin, mozno dni) prestane oscam dekodovat a v logu vidim nasledovne hlasky:
(reader) reader1 [irdeto] Maybe you have a bad Cam Key set it from config file

Staci restart a vsetko funguje. Nemate niekto napad, co moze sposobovat tento problem? Vdaka.

[peter54]

Nechodia ti global zapisy. Znamy problem s irdetom, pozri temu http://www.ab-forum.info/viewtopic.php?f=357&t=69665 a zariad sa podla toho.

Screenshot_20180924-223222.png

[STomko]

Co sa tyka EMM:
Total written:
( UK / G / S / UQ )
( 0 / 5867 / 118 / 0 )

Ako je potom mozne, ze po restarte oscamu vsetko nabehne. Len sa pytam a chcel by som to pochopit. Vdaka

[peter54]

To co si dal je malo na serioznu analyzu. Musis ukázať logy, aku mas citacku, co sa stane po restarte, akeho mas klienta, ako ti chodia zapisy. Inak len hádam a vestim z kristalovej gule.
Takto sa neda ani uhádnuť, ci mas blbu čítačku, alebo blbe nastavenia.
Dobre nastaveny oscam ide od vypadku elektriny po ďalší vypadok elektriny.
U mna ďalší projekt je spraviť si malicku upsku pre oscam. Potom moze ísť nonstop.

Zaujimava vec - aku verziu si mal predtym? Isiel si aj predtym na irdeto?

[STomko]

Pokusim sa pri najblizsom vypadku. Pouzival som starsiu verziu oscam, ale kvoli tej karte som to spravil odznova. Aj na starej verzii som pouzival cccam server a bolo to bez problemov. Pouzivam USB dvojcitacku (rezim smartmouse), 2x Skylink 0624, zapisy mi chodia bez problemov. Klienti normalne funguju, sleduju programy dekodovane z kart, a zrazu to prestane chodit, staci restart, a klient sa do 5s rozbehne, cize pochybujem ze je to vecou ze by nechodili zapisy, ale mozem sa mylit. Len nevidim suvis v tom ze po restarte by sa zrazu nieco zapisalo, co doteraz za behu nebolo mozne?

[jajo4546]

... cize pochybujem ze je to vecou ze by nechodili zapisy, ale mozem sa mylit.

alebo ti chodia ktore nepotrebujes, ale mozem sa mylit

[peter54]

Este by si mohol preverit napájanie. Mne takto obcas vypadla citacka, ked som ju mal na stb v usb vedla hdd. Asi tak raz za 2 tyzdne az mesiac. Ta ista citacka v zere nevypadava.

[STomko]

Omylom som zmazal predosly prispevok. Zvlastne je ze server bezi, citacky su OK, viem precitat zapisy z karty a podobne. Citacky mam zapojene cez externe napajany hub, prave kvoli moznym problemom s napajanim.
Situacia sa zopakovala po cca 22 hodinach, klienti prestali dekodovat kanaly:

Kód: Vybrat vše

2018/09/25 19:50:23 3CB9C693 r   (reader) reader1 [irdeto] Maybe you have a bad Cam Key set it from config file
2018/09/25 19:50:23 5E9912DB c      (ecm) user1 (0624@000000/0000/3398/6A:DBADE3839ADAAF7118F16372F1917A17): not found (14 ms) by reader1 - Joj HD
2018/09/25 19:50:23 3CB9C693 r   (reader) reader1 [irdeto] Maybe you have a bad Cam Key set it from config file
2018/09/25 19:50:23 5E9912DB c      (ecm) user1 (0624@000000/0000/3397/64:E1FD0F6D54387280BF7A9CAA7A8EC38C): not found (8 ms) by reader1 - Dajto HD
2018/09/25 19:50:23 3CB9C693 r   (reader) reader1 [irdeto] Maybe you have a bad Cam Key set it from config file
2018/09/25 19:50:23 5E9912DB c      (ecm) user1 (0624@000000/0000/3399/6A:C57E6D7BD43B74638CD323952CAC9D46): not found (16 ms) by reader1 - Joj PLUS HD
2018/09/25 19:50:24 3CB9C693 r   (reader) reader1 [irdeto] Maybe you have a bad Cam Key set it from config file
2018/09/25 19:50:24 5E9912DB c      (ecm) user1 (0624@000000/0000/3359/6A:674EED864895DB78E7FA748AB8A4F3B0): not found (12 ms) by reader1 - JOJ Cinema HD
2018/09/25 19:50:24 3CB9C693 r   (reader) reader1 [irdeto] Maybe you have a bad Cam Key set it from config file
2018/09/25 19:50:24 5E9912DB c      (ecm) user1 (0624@000000/0000/13B6/64:03B55059F50A3E2C60236999706AFF24): not found (9 ms) by reader1 - Doma HD
2018/09/25 19:50:32 3CB9C693 r   (reader) reader1 [irdeto] Maybe you have a bad Cam Key set it from config file
2018/09/25 19:50:32 5E9912DB c      (ecm) user1 (0624@000000/0000/371F/64:DA64D4E80CCDDB13AA4567C93AD41FA1): not found (17 ms) by reader1 - Wau HD
2018/09/25 19:50:38 3CB9C693 r   (reader) reader1 [irdeto] Maybe you have a bad Cam Key set it from config file
2018/09/25 19:50:38 5E9912DB c      (ecm) user1 (0624@000000/0000/1F42/61:38B7E18D21A271C5C43B0458C503F780): not found (15 ms) by reader1 - CT 2 HD
2018/09/25 19:50:38 3CB9C693 r   (reader) reader1 [irdeto] Maybe you have a bad Cam Key set it from config file
2018/09/25 19:50:38 5E9912DB c      (ecm) user1 (0624@000000/0000/1F41/64:C3FE3FB2E291BE1CF7FE7CC779E9E879): not found (5 ms) by reader1 - CT 1 HD
2018/09/25 19:50:39 3CB9C693 r   (reader) reader1 [irdeto] Maybe you have a bad Cam Key set it from config file

Restart oscamu, klienti nabehnu okamzite:

Kód: Vybrat vše

2018/09/25 20:19:33 00000000 s     (main) System name    = Linux
2018/09/25 20:19:33 00000000 s     (main) Host name      = xxx
2018/09/25 20:19:33 00000000 s     (main) Release        = 4.14.50-v7+
2018/09/25 20:19:33 00000000 s     (main) Version        = #1122 SMP Tue Jun 19 12:26:26 BST 2018
2018/09/25 20:19:33 00000000 s     (main) Machine        = armv7l
2018/09/25 20:19:33 00000000 s     (main) creating pidfile /tmp/.oscam/oscam.pid with pid 4275
2018/09/25 20:19:33 00000000 s   (config) services reloaded: 0 services freed, 2 services loaded, rejected 0
2018/09/25 20:19:33 00000000 s   (config) userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2018/09/25 20:19:33 00000000 s     (main) signal handling initialized
2018/09/25 20:19:33 00000000 s   (config) 163 service-id's loaded in 3 ms
2018/09/25 20:19:33 00000000 s      (net) cccam: initialized (fd=6, port=9999)
2018/09/25 20:19:33 00000000 s   (reader) reader1 [mouse] creating thread for device /dev/ttyUSB2
2018/09/25 20:19:33 00000000 s   (reader) reader2 [mouse] creating thread for device /dev/ttyUSB3
2018/09/25 20:19:33 00000000 s     (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2018/09/25 20:19:33 00000000 s     (main) waiting for local card init
2018/09/25 20:19:33 03503792 h    (webif) webif: decompressed 177453 bytes back into 436236 bytes
2018/09/25 20:19:33 03503792 h    (webif) HTTP Server running. ip=0.0.0.0 port=8888
2018/09/25 20:19:33 3CB9C693 r   (reader) reader1 [mouse] Buffers readed  0 bytes total time_us 75134
2018/09/25 20:19:33 3CC3B396 r   (reader) reader2 [mouse] Buffers readed  0 bytes total time_us 75124
2018/09/25 20:19:33 3CB9C693 r   (reader) reader1 [mouse] Flush readed byte Nr 1 value 3b time_us 16886
2018/09/25 20:19:33 3CC3B396 r   (reader) reader2 [mouse] Flush readed byte Nr 1 value 3b time_us 16881
2018/09/25 20:19:33 3CB9C693 r   (reader) reader1 [mouse] Flush readed byte Nr 2 value 78 time_us 14719
2018/09/25 20:19:33 3CB9C693 r   (reader) reader1 [mouse] Flush readed byte Nr 3 value 12 time_us 34
2018/09/25 20:19:33 3CB9C693 r   (reader) reader1 [mouse] Flush readed byte Nr 4 value 00 time_us 30
2018/09/25 20:19:33 3CB9C693 r   (reader) reader1 [mouse] Flush readed byte Nr 5 value 00 time_us 29
2018/09/25 20:19:33 3CC3B396 r   (reader) reader2 [mouse] Flush readed byte Nr 2 value 78 time_us 14924
2018/09/25 20:19:33 3CC3B396 r   (reader) reader2 [mouse] Flush readed byte Nr 3 value 12 time_us 30
2018/09/25 20:19:33 3CC3B396 r   (reader) reader2 [mouse] Flush readed byte Nr 4 value 00 time_us 26
2018/09/25 20:19:33 3CC3B396 r   (reader) reader2 [mouse] Flush readed byte Nr 5 value 00 time_us 25
2018/09/25 20:19:33 3CC3B396 r   (reader) reader2 [mouse] Flush readed byte Nr 6 value 54 time_us 24
2018/09/25 20:19:33 3CC3B396 r   (reader) reader2 [mouse] Flush readed byte Nr 7 value c4 time_us 25
2018/09/25 20:19:33 3CC3B396 r   (reader) reader2 [mouse] Flush readed byte Nr 8 value 03 time_us 27
2018/09/25 20:19:33 3CC3B396 r   (reader) reader2 [mouse] Flush readed byte Nr 9 value 00 time_us 25
2018/09/25 20:19:33 3CC3B396 r   (reader) reader2 [mouse] Flush readed byte Nr 10 value 8f time_us 30
2018/09/25 20:19:33 3CC3B396 r   (reader) reader2 [mouse] Flush readed byte Nr 11 value f1 time_us 26
2018/09/25 20:19:33 3CB9C693 r   (reader) reader1 [mouse] Flush readed byte Nr 6 value 54 time_us 32
2018/09/25 20:19:33 3CB9C693 r   (reader) reader1 [mouse] Flush readed byte Nr 7 value c4 time_us 30
2018/09/25 20:19:33 3CB9C693 r   (reader) reader1 [mouse] Flush readed byte Nr 8 value 03 time_us 30
2018/09/25 20:19:33 3CB9C693 r   (reader) reader1 [mouse] Flush readed byte Nr 9 value 00 time_us 29
2018/09/25 20:19:33 3CB9C693 r   (reader) reader1 [mouse] Flush readed byte Nr 10 value 8f time_us 30
2018/09/25 20:19:33 3CB9C693 r   (reader) reader1 [mouse] Flush readed byte Nr 11 value f1 time_us 32
2018/09/25 20:19:33 3CB9C693 r   (reader) reader1 [mouse] Flush readed byte Nr 12 value 90 time_us 13560
2018/09/25 20:19:33 3CB9C693 r   (reader) reader1 [mouse] Flush readed byte Nr 13 value 00 time_us 35
2018/09/25 20:19:33 3CC3B396 r   (reader) reader2 [mouse] Flush readed byte Nr 12 value 90 time_us 15470
2018/09/25 20:19:33 3CC3B396 r   (reader) reader2 [mouse] Flush readed byte Nr 13 value 00 time_us 32
2018/09/25 20:19:33 3CB9C693 r   (reader) reader1 [mouse] Buffers readed  13 bytes total time_us 123916
2018/09/25 20:19:33 3CB9C693 r   (reader) reader1 [mouse] Reader initialized (device=/dev/ttyUSB2, detect=none, mhz=600, cardmhz=357)
2018/09/25 20:19:33 3CC3B396 r   (reader) reader2 [mouse] Buffers readed  13 bytes total time_us 123667
2018/09/25 20:19:33 3CC3B396 r   (reader) reader2 [mouse] Reader initialized (device=/dev/ttyUSB3, detect=none, mhz=600, cardmhz=357)
2018/09/25 20:19:34 3CC3B396 r   (reader) reader2 [mouse] card detected
2018/09/25 20:19:34 3CB9C693 r   (reader) reader1 [mouse] card detected
2018/09/25 20:19:34 3CB9C693 r   (reader) reader1 [mouse] Buffers readed  0 bytes total time_us 75145
2018/09/25 20:19:34 3CC3B396 r   (reader) reader2 [mouse] Buffers readed  0 bytes total time_us 75204
2018/09/25 20:19:35 3CB9C693 r   (reader) reader1 [mouse] ATR: xxx
2018/09/25 20:19:35 3CB9C693 r   (reader) reader1 [mouse] ORF ICE CW-Mode recognized
2018/09/25 20:19:35 3CC3B396 r   (reader) reader2 [mouse] ATR: xxx
2018/09/25 20:19:35 3CC3B396 r   (reader) reader2 [mouse] ORF ICE CW-Mode recognized
2018/09/25 20:19:35 3CB9C693 r   (reader) reader1 [mouse] Buffers readed  0 bytes total time_us 75142
2018/09/25 20:19:35 3CC3B396 r   (reader) reader2 [mouse] Buffers readed  0 bytes total time_us 75130
2018/09/25 20:19:35 3CB9C693 r   (reader) reader1 [mouse] Setting baudrate to 32258 bps
2018/09/25 20:19:35 3CC3B396 r   (reader) reader2 [mouse] Setting baudrate to 32258 bps
2018/09/25 20:19:35 3CB9C693 r   (reader) reader1 [mouse] Buffers readed  0 bytes total time_us 75153
2018/09/25 20:19:35 3CC3B396 r   (reader) reader2 [mouse] Buffers readed  0 bytes total time_us 75142
2018/09/25 20:19:36 3CB9C693 r   (reader) reader1 [mouse] Hist. Bytes: TÄ
2018/09/25 20:19:36 3CB9C693 r   (reader) reader1 [mouse] detect irdeto card
2018/09/25 20:19:36 3CC3B396 r   (reader) reader2 [mouse] Hist. Bytes: TÄ
2018/09/25 20:19:36 3CC3B396 r   (reader) reader2 [mouse] detect irdeto card
2018/09/25 20:19:36 3CB9C693 r   (reader) reader1 [mouse] caid: 0624, acs: 0.06, country code: SVK
2018/09/25 20:19:36 3CC3B396 r   (reader) reader2 [mouse] caid: 0624, acs: 0.06, country code: CZE
2018/09/25 20:19:36 3CB9C693 r   (reader) reader1 [mouse] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2018/09/25 20:19:36 3CC3B396 r   (reader) reader2 [mouse] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2018/09/25 20:19:36 3CB9C693 r   (reader) reader1 [mouse] WARNING: For Irdeto cards you will have to set 'cardmhz= 600' in oscam.server
2018/09/25 20:19:36 3CC3B396 r   (reader) reader2 [mouse] WARNING: For Irdeto cards you will have to set 'cardmhz= 600' in oscam.server
2018/09/25 20:19:37 3CB9C693 r   (reader) reader1 [mouse] active providers: 4 (6b10ff,ffffff,ffffff,ffffff)
2018/09/25 20:19:37 3CB9C693 r   (reader) reader1 [mouse] found card system irdeto
2018/09/25 20:19:37 3CB9C693 r   (reader) reader1 [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max alloted of 1
2018/09/25 20:19:37 3CC3B396 r   (reader) reader2 [mouse] active providers: 4 (8363ff,ffffff,ffffff,ffffff)
2018/09/25 20:19:37 3CC3B396 r   (reader) reader2 [mouse] found card system irdeto
2018/09/25 20:19:37 3CC3B396 r   (reader) reader2 [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max alloted of 1
2018/09/25 20:19:37 3CB9C693 r   (reader) reader1 [irdeto] entitlements for provider: 1, id: xxxx
2018/09/25 20:19:37 3CB9C693 r   (reader) reader1 [irdeto] chid: 1389, date: xxxx
.
.
.
2018/09/25 20:19:37 3CC3B396 r   (reader) reader2 [irdeto] ready for requests
2018/09/25 20:19:37 3CB9C693 r   (reader) reader1 [irdeto] ready for requests
2018/09/25 20:19:38 00000000 s     (main) init for all local cards done
2018/09/25 20:19:38 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2018/09/25 20:19:38 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2018/09/25 20:19:38 00000000 s (anticasc) anti cascading disabled
2018/09/25 20:19:38 5078FC7B c   (client) plain dvbapi-client granted (anonymous, au=off)
2018/09/25 20:19:38 5078FC7B c   (dvbapi) dvbapi channelcache loaded from /usr/local/etc/oscam.ccache
2018/09/25 20:19:38 7C091943 c   (client) anonymous disconnected from x.x.x.x
2018/09/25 20:19:38 373C7366 c        (-) -- Skipped 1 duplicated log lines --
2018/09/25 20:19:38 373C7366 c   (client) anonymous disconnected from x.x.x.x
2018/09/25 20:19:38 5078FC7B c   (dvbapi) ERROR: Could not detect DVBAPI version.
2018/09/25 20:19:38 64D8EC23 c   (client) anonymous disconnected from x.x.x.x
2018/09/25 20:19:38 06438B44 c   (client) anonymous disconnected from x.x.x.x
2018/09/25 20:19:38 101CDD39 c   (client) encrypted cccam-client x.x.x.x granted (user1, au=auto (2 reader))
2018/09/25 20:19:39 3CB9C693 r   (reader) reader1 [irdeto] Maybe you don't have the entitlements for this channel
2018/09/25 20:19:39 101CDD39 c      (ecm) user1 (0624@000000/0000/371F/64:DF386B7FC4874FB086C5F02B2E682C0F): not found (55 ms) by reader1 - Wau HD
2018/09/25 20:19:54 101CDD39 c      (ecm) user1 (0624@000000/0000/371F/64:CC479CD5157F2C39BF059D23799824E9): found (95 ms) by reader1 - Wau HD
2018/09/25 20:19:56 101CDD39 c      (ecm) user1 (0624@000000/0000/371F/64:F680EBB8B31B94731E35B5730FD84DCC): found (105 ms) by reader1 - Wau HD

Sice si mi dal odkaz na iny thread, kde sa spomina ozivenie irdeto. Neide mi ale do hlavy - ak je to vec zapisov, ako je potom mozne ze po restarte to nabehne? Teoreticky by som mohol nastavit cron job a restartnut oscam kazdy den (noc), len by som rad aj pochopil, kde je problem. newcamd som predtym pouzival, no mal som problem ze som nevedel spojazdnit AU pre newcamd clientov na obe karty, a tak sa mi stavalo ze mi z casu na cas vypadla jedna alebo druha, a musel som manualne menit AU.

[STomko]

Takze problem nie je ani tak v uptime, ale prestane to chodit vzdy vecer okolo 22:30. Nejaky napad?

[jajo4546]

nemas zapnuty usporny rezim ?
mne sa tiez v zime o 22:30 vypne radiator
nuz asi ti bratia v tricku "sitlink" vecer posielaju smsky

[peter54]

Schvalne skus logovat aj emm global.

[STomko]

Dal som logovat aj EMM global, a jedneho klienta som prehodil na newcamd, druheho som nechal na cccam. Po nejakom case ked sa odpojil newcamd klient, emm global prestali chodit (zatial co cccam klient bol stale pripojeny). Ked som newcamd klienta zapol, emm zacali chodit. Avsak aj ked som ho prepol z newcamd na cccam, emm global chodili nadalej. Zda sa teda ze je to sposobene tymi emm global - avsak co je pricinou problemu? Prestane cccam klient casom posielat emm? Je to chyba oscamu/cccamu na strane servera/klienta?

[peter54]

Chyba je na strane klienta. Zatiaľ to riesim skriptom http://www.ab-forum.info/viewtopic.php? ... 20#p747991
V uvedenom vlakne su aj riesenia od dalsich kolegov.
Od tej doby som nemal vypadok oscamu ani kariet ani nicoho. Proste po cca 13 minutach prestanu chodiť z klientov emmg a to je jedno, akym protokolom sa pripajam. Obcas po prepnuti programu posle, ale istota je reštart oscamu na klientovi a vzápätí prepnut na stv a potom na ct a za 6 minut pride asi 50 emmg a zase 12 hodin pokoj. Restart oscamu na bezkartovom klientovi sposobi kratke seknutie asi na sekundu, ani si nikto nevsimne. Lepsie zatial neviem poradiť.

Az raz budem mat veeeela casu, pozriem do zdrojakov oscamu, ale jednak nie som c-ckar a jednak mi to funguje uz takto výborne.

[STomko]

Tak tento problem pozorujem len na cccame. Na newcamde je to u mna OK. Prave preto som chcel presedlat na cccam - v Newcamde som mal problem aby bolo AU zapnute na obe citacky, hoci maju rovnaky CAID. Vacsinou sa klient chytil len na jednu, a tym padom mi na druhej karte z casu na cas prestali chodit emm. Pomohlo nastavit AU na druhu citacku, ktora nesla, a rozbehlo sa to.

[STomko]

Takze aj napriek zapnutemu logovaniu EMM od klienta mam z casu na cas problem. Ked to vypadne, skusil som restartovat len klienta/klientov, avsak to nepomaha. Musim restartnut server. Podla logov sa vsak globalne EMM zapisuju aj ked to prestane fungovat.

[jajo4546]

ze by surflock ?

[STomko]

Co s tym ma surflock? Staci restartnut server a ide to, kludne moze byt pripojeny aj jeden klient.

[peter54]

Surflock je nezmysel. Problem su dve rovnake karty. Sprav si dvoch uzivatelov ako sa pise v uvedenom príspevku.
[account]
user = spalna
pwd = p
description = Spálňa
au = 0624_CZ
group = 1,2

[account]
user = spalnX
pwd = p
au = 0624_SK
group = 1, 2

Jeden bude posielať emm na jednu a druhy na druhú kartu. Prepojenie cez cs378x a samozrejme z poskytovaca emm dve citacky.
Potom sa ozvi ci pomohlo.

[jajo4546]

Toto tu na fóre je uz spomenuté veľa krát.
Áno dve karty tak musia byt dvaja userovia a každý posiela iba na jednu kartu.
Ako mu chceš pomôcť ked ani základne nastavenia si nenašiel.
Možno to tak aj ma a co teraz ?
Ked to ma celé zle aj tak by mu nemali naraz prestať chodiť obe karty, ci?