oscam debian amd64

[xtomm]

Ahoj,
potřeboval bych radu. Mám Oscam na Debian amd64 + čtečku Smartmouse Easymouse 2 USB a 0D96 kartu

Vše funguje perfektně až na jednu věc. Zápisy na můj vkus dost zatěžují cpu (GT Intel 2 jádra) - cca trvale 25%.
A global zápisů na kartu je také poměrně dost (cca každou vteřinu). au / zápisy jsem povolil jen u jednoho klienta - jinak je cpu load katastrofa.
Jakmile bloknu global emm úplně, tak to jede naprosto bez problémů.

Je to OK nebo něco špatně?
Díky moc za rady


OSCam: 1.20-unstable_svn Build: r10943 Compiler: x86_64-linux-gnu-libusb

conf

Kód: Vybrat vše

[global]
logfile                       = /var/log/oscam/oscam.log
nice                          = -1
maxlogsize                    = 4096
usrfile                       = /var/log/oscam/oscam-usr.log
lb_mode                       = 1

reader

Kód: Vybrat vše

label                         = Reader-1
protocol                      = mouse
device                        = /dev/ttyUSB0
autospeed                     = 0
caid                          = 0D96
detect                        = cd
ident                         = 0D96:000004,000008
group                         = 1
emmcache                      = 1,1,2,0

user

Kód: Vybrat vše

user                          = client1
pwd                           = pass1
au                            = Reader-1
group                         = 1
cccignorereshare              = 0

[11chloe]

Je to tady popsany alespon 20x .

[xtomm]

Asi jsem slepý

[11chloe]

Zrovna dneska to tu už bylo. Pokud nebudeš línej tak odpověď najdeš.

[StormsRevenge]

emmcache 1,1,0 a taky to dělají určité revize binárek....

[johnyzh94]

Tak chcem to vyriesit takto: mam debian server, kde je neinstalovany oscam a tvheadend (kde budem streamovat do siete jednotlive kanaly - zatial mam dva usb tunery {jeden DVBT druhy DVBT2)

Avsak stojim na spojazdneni oscamu s irdeto kartou.

Log:

Kód: Vybrat vše

root@skzvjc-server:/usr/local/etc# oscam
12:22:28 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11507 (x86_64-linux-gnu)
12:22:28 00000000 s     (main) System name    = Linux
12:22:28 00000000 s     (main) Host name      = skzvjc-server
12:22:28 00000000 s     (main) Release        = 4.9.0-8-amd64
12:22:28 00000000 s     (main) Version        = #1 SMP Debian 4.9.144-3.1 (2019-02-19)
12:22:28 00000000 s     (main) Machine        = x86_64
12:22:28 00000000 s     (main) creating pidfile /tmp/.oscam/oscam.pid with pid 13238
12:22:28 00000000 s   (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
12:22:28 00000000 s     (main) signal handling initialized
12:22:28 00000000 s      (net) newcamd: initialized (fd=4, port=10010)
12:22:28 00000000 s      (net) -> CAID: 0D03 PROVID: 000004, 000008
12:22:28 00000000 s      (net) newcamd: initialized (fd=5, port=10011)
12:22:28 00000000 s      (net) -> CAID: 0D0F PROVID: 1F1F1F
12:22:28 00000000 s   (reader) Plustelka [mouse] creating thread for device /dev/ttyUSB1
12:22:28 00000000 s     (main) waiting for local card init
12:22:28 0766B77A h    (webif) webif: decompressed 165026 bytes back into 400960 bytes
12:22:28 0766B77A h    (webif) HTTP Server running. ip=0.0.0.0 port=8888
12:22:28 2E56962E r   (reader) Plustelka [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=600, cardmhz=600)
12:22:29 2E56962E r   (reader) Plustelka [mouse] card detected
12:22:30 2E56962E r   (reader) Plustelka [mouse] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 20 56 37 2E 30 9F 
12:22:31 2E56962E r   (reader) Plustelka [mouse] detect irdeto card
12:22:33 2E56962E r   (reader) Plustelka [mouse] Warning: needed try nr 2, next ECM has some delay
12:22:38 2E56962E r        (-) -- Skipped 1 duplicated log lines --
12:22:38 2E56962E r   (reader) Plustelka [mouse] card system not supported
12:22:38 2E56962E r   (reader) Plustelka [mouse] Normal mode failed, reverting to Deprecated Mode
12:22:39 2E56962E r   (reader) Plustelka [mouse] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 20 56 37 2E 30 9F 
12:22:40 2E56962E r   (reader) Plustelka [mouse] detect irdeto card
12:22:41 2E56962E r   (reader) Plustelka [mouse] Warning: needed try nr 2, next ECM has some delay
12:22:45 2E56962E r        (-) -- Skipped 1 duplicated log lines --
12:22:45 2E56962E r   (reader) Plustelka [mouse] card system not supported
12:22:45 2E56962E r   (reader) Plustelka [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
12:22:45 2E56962E r   (reader) Plustelka [mouse] card initializing error
12:22:46 00000000 s     (main) init for all local cards done
12:22:46 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
12:22:46 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
12:22:46 44D05256 c   (client) plain dvbapi-client granted (Dreambox, au=auto (1 reader))
12:22:46 44D05256 c   (dvbapi) dvbapi channelcache loaded from /usr/local/etc/oscam.ccache
12:22:46 44D05256 c   (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0 maximum amount of possible filters is 32 (oscam limit is 32)

oscam.conf

Kód: Vybrat vše

[global]
logfile = stdout
bindwait = 30
nice = -1
lb_mode = 1

[newcamd]
port = 10010@0D03:000004,000008;10011@0D0F:000008 # bude zdielat 0D03 na porte 10010 (provider 04 a 08 ) a 0D0F na porte 10011 (provider 08 ) pre vzdialeneho klienta newcamd
key = 0102030405060708091011121314


[dvbapi]
enabled = 1
au = 1
user = Dreambox
request_mode = 0

[webif]
httpport = 8888 # port na pristup k oscamu cez web
httpuser = user # uzivatel na pristup k oscamu cez web
httppwd = pass # heslo na pristup k oscamu cez web
httprefresh = 5 # cas ako casto sa bude obnovovat stranka
httpallowed = 127.0.0.1,10.0.0.0-10.0.0.254 # povolenie ake IP adresy sa mozu pripojit na oscam web

oscam.user

Kód: Vybrat vše

[account]
user = Dreambox
pwd =
disabled = 0
group = 1
au = 1

oscam.server

Kód: Vybrat vše

[reader]
label = Plustelka
protocol = mouse
device = /dev/ttyUSB1
boxkey = B1B2B3B4B5B6B7B8
rsakey = AB722A8CAA9F58DE0D1CBB6FF329C961ED9DD759B103082D1BAE64C27A861D42E7F631891C2660EFA57484F80BBB4E0E8249A8368E31BD3FFC369FBE95160528
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 0,3,2,1

Nejake napady? Citacku mam v mode smarmouse a 6Mhz

[marecek29]

0D03 uz je ctyri roky neakualni.
Co to ostatni ?

[matov]

A 0D0F to ma tiež už dosť dlho za sebou. Nápadov pre teba by tu bolo dosť.
Mohol by si začať tým, že si tu na foru najdeš config pre svoju kartu.
Ak ňou je 0D03 či 0D0F, tak sorry, ale z nich už veľa nevytiahneš.