Karta - Skylink (0D96-0624)

[AwayFromKeyboard]

Ahoj, zkousim preklopit 0d96 na 0624 a stále se me to nedari. Když nakopiruji nejaky config tak me to hlasi no Entitlements
posilam config jak to mam nastaveno ted a funkcni na 0d96. Budu rad když me poradite jak nastavit klidne i do PM. Dekuji
conf 0d96
label = Reader-1
description = Slot 1
enable = 1
protocol = smargo
device = /dev/ttyUSB0
pincode = 0000
gbox_max_distance = 2
gbox_max_ecm_send = 3
gbox_reshare = 5
cccam_reshare = 5
services = skylink
autospeed = 1
force_irdeto = 0
needsemmfirst = 0
detect = cd
group = 1

V rezimu Irdeto je pouzivany CAID=0624. Takze "force_irdeto = 0" je blbost ak chces rezim IRDETO / CAID 0624, povol to, daj tam "= 1". Dalej "needsemmfirst = 0" je taktiez blbost, nakolko Skylink v Irdeto rezime si bohuzial vyzaduje nejake tie EMM na svoj rozbeh. Bez nich sa karta nezobudi (napr. po hodine necinnosti karty, po restartovani zariadenia, po restartovani Oscam, atd.), takze aj tu nastav "= 1". Ten zbytok komentovat nebudem, musis si pozistovat uz sam - http://www.streamboard.tv/wiki/OSCam/en , ze co tam smie byt a co nesmie byt. Rovnako neuvadzas svoje dalsie konfiguracne subory, v ktorych mozes mat teoreticky tiez nejaky dalsi problem - ako napriklad nastavenie pouzivatela dvbapi (teda ak zapisuje na kartu on - interny pouzivatel, oscam sam na seba, pretoze ak zapisuju na kartu nejaki vzdialeni klienti, tam je to zase nieco ineho... musia mat povolenie v tvojom oscam.user subore na au=1, pretoze toto je defaultne vypnute). Je toho vela... ked tak napis PM.

[saxf]

Ahojte pani, prosim o radu.
Mam Irdeto 01 kartu a stare 2 prijimace. DM800 original, nahral som tam newnigma2 image, a oscam build 11420 system bezi, ale nechce dekodovat irdeto kartu. Potom mam este stary cryptobox ab650, tam vlozim kartu a ide automaticky, aj bez pripojenia na internet.

Skor ako ma ukamenujete, ze uz to tu bolo pisane X krat, tak hladal som u na fore, aj cez google a vyskal som niekolko configov, dokonca mi znamy poslal svoje configy ktore jemu funguju s oscamom, ale mne to nebezi

Poradi prosim niekto ?

tu je zopar ukaziek ktore som skusal:

Kód: Vybrat vše

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11420
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.server.txt

[reader]
enable = 0
label                         = upper_card_0624
protocol                      = internal
device                        = /dev/sci0
caid                          = 0624
boxkey                        = A1C6F3D8B5E1F2C1
rsakey                        = 79EA25A763DA2C3E02B456A13962E60BCE63E628A2C177BE951CED96A9C6131A146F98D5867B7AE6682324FD6481913C0241F065C8D3457E54BB59B7B5DE0362
ecmnotfoundlimit              = 5000
detect                        = cd
mhz                           = 600
cardmhz                       = 2700
group                         = 1
emmcache                      = 1,5,31,0
disablecrccws                 = 1
force_irdeto = 1
ecmnotfoundlimit = 5
ident = 0624:000000

[reader]
label = skylink
enable = 1
protocol = internal
device = /dev/sci0
caid = 0624
ident = 0624:000000
rsakey = 2598FE21A1CEF05BBC459F495FCE8F1E811B126FA8933D8DDB6480A93D43CFA7255F009E875814BECF53DA7610D675D20EEBA8A212F9079CBD1D2FAD65362B42
force_irdeto = 1
boxkey = 4FD3B1C6E406AA69
detect = cd
mhz = 500
cardmhz = 357
group = 1,2
emmcache = 1,3,2
lb_weight = 100

A tu je log zo zatial poslednej konfiguracie:

Kód: Vybrat vše

2019/04/13 22:38:56 1F0ED09C r   (reader) skylink [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=5.00 MHz)
2019/04/13 22:38:56 1F0ED09C r   (reader) skylink [internal] Reader sci internal, detected box type: dm800
2019/04/13 22:38:56 07EBA944 h    (webif) HTTP Server: ERROR: Creating IPv6 socket failed! (errno=124 Address family not supported by protocol)
2019/04/13 22:38:56 07EBA944 h    (webif) HTTP Server: Falling back to IPv4.
2019/04/13 22:38:56 07EBA944 h    (webif) HTTP Server running. ip=:: port=83
2019/04/13 22:38:57 1F0ED09C r   (reader) skylink [internal] card detected
2019/04/13 22:38:59 1F0ED09C r   (reader) skylink [internal] ATR: 3B 9F 11 40 60 49 52 44 45 54 4F 20 41 43 53 20 56 36 2E 30 
2019/04/13 22:38:59 1F0ED09C r   (reader) skylink [internal] Init card protocol T0, FI=1, F=372, D=1, N=0
2019/04/13 22:38:59 1F0ED09C r   (reader) skylink [internal] Calculated work ETU is 82.67 us reader mhz = 450
2019/04/13 22:38:59 1F0ED09C r   (reader) skylink [internal] Buffers readed  0 bytes total time_us 74686
2019/04/13 22:38:59 1F0ED09C r   (reader) skylink [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2019/04/13 22:39:00 1F0ED09C r   (reader) skylink [internal] Hist. Bytes: IRDETO ACS V6.0
2019/04/13 22:39:00 1F0ED09C r   (reader) skylink [internal] detect irdeto card
2019/04/13 22:39:00 1F0ED09C r   (reader) skylink [internal] caid: 0624, acs: 0.06, country code: SVK
2019/04/13 22:39:01 1F0ED09C r   (reader) skylink [internal] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2019/04/13 22:39:01 1F0ED09C r   (reader) skylink [internal] WARNING: For Irdeto cards you will have to set 'mhz= 600' in oscam.server
2019/04/13 22:39:01 1F0ED09C r   (reader) skylink [internal] active providers: 4 (05b6b6,ffffff,ffffff,ffffff)
2019/04/13 22:39:01 1F0ED09C r   (reader) skylink [internal] found card system irdeto
2019/04/13 22:39:01 1F0ED09C r   (reader) skylink [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max alloted of 1
2019/04/13 22:39:01 1F0ED09C r   (reader) skylink [irdeto] entitlements for provider: 1, id: 05B6B6
2019/04/13 22:39:01 1F0ED09C r   (reader) skylink [irdeto] chid: 14B5, date: 2016/12/14 - 2016/12/28
2019/04/13 22:39:01 1F0ED09C r   (reader) skylink [irdeto] chid: 1392, date: 2016/12/14 - 2016/12/24
2019/04/13 22:39:01 1F0ED09C r   (reader) skylink [irdeto] chid: 7FFD, date: 2019/04/13 - 2019/04/23
2019/04/13 22:39:01 1F0ED09C r   (reader) skylink [irdeto] chid: FFB0, date: 2019/04/13 - 2019/05/13
2019/04/13 22:39:01 1F0ED09C r   (reader) skylink [irdeto] chid: 7FFE, date: 2019/04/13 - 2019/05/13
2019/04/13 22:39:01 1F0ED09C r   (reader) skylink [irdeto] chid: 7FFC, date: 2019/04/13 - 2019/05/13
2019/04/13 22:39:01 1F0ED09C r   (reader) skylink [irdeto] chid: FFD8, date: 2019/04/13 - 2019/05/13
2019/04/13 22:39:01 1F0ED09C r   (reader) skylink [irdeto] chid: FFE0, date: 2019/04/13 - 2019/05/13
2019/04/13 22:39:01 1F0ED09C r   (reader) skylink [irdeto] chid: 03E9, date: 2019/04/12 - 2019/05/12
2019/04/13 22:39:01 1F0ED09C r   (reader) skylink [irdeto] chid: 03EA, date: 2019/04/12 - 2019/05/12
2019/04/13 22:39:01 1F0ED09C r   (reader) skylink [irdeto] chid: 03EB, date: 2019/04/12 - 2019/05/12
2019/04/13 22:39:01 1F0ED09C r   (reader) skylink [irdeto] chid: 03EC, date: 2019/04/12 - 2019/05/12
2019/04/13 22:39:01 1F0ED09C r   (reader) skylink [irdeto] chid: 03ED, date: 2019/04/13 - 2019/05/13
2019/04/13 22:39:01 1F0ED09C r   (reader) skylink [irdeto] chid: 1772, date: 2019/04/12 - 2019/05/12
2019/04/13 22:39:02 1F0ED09C r   (reader) skylink [irdeto] ready for requests
2019/04/13 22:39:02 00000000 s     (main) init for all local cards done
2019/04/13 22:39:02 724423C9 c   (client) plain dvbapi-client granted (dvbapiau, au=auto (3 reader))
2019/04/13 22:39:02 724423C9 c   (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
2019/04/13 22:39:02 724423C9 c   (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
2019/04/13 22:39:08 724423C9 c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 0D96 ECM_PID: 0F65 PROVID: 000000 
2019/04/13 22:39:08 724423C9 c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 0624 ECM_PID: 0F64 PROVID: 000000 
2019/04/13 22:39:08 724423C9 c   (dvbapi) Demuxer 0 ecmpid 2 CAID: 0500 ECM_PID: 0F66 PROVID: 051910 
2019/04/13 22:39:08 724423C9 c   (dvbapi) Demuxer 0 found 3 ECMpids and 3 STREAMpids in caPMT
2019/04/13 22:39:08 724423C9 c   (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0624 PROVID 000000 ECMPID 0F64 ANY CHID PMTPID 0F3C VPID 0F46
2019/04/13 22:39:08 1F0ED09C r   (reader) skylink [irdeto] Maybe you don't have the entitlements for this channel
2019/04/13 22:39:08 724423C9 c   (dvbapi) Demuxer 0 found 3 ECMpids and 3 STREAMpids in PMT
2019/04/13 22:39:08 724423C9 c      (ecm) dvbapiau (0624@000000/0000/3359/6A:340DEFACE302686FFEC737989EF64F9A): not found (121 ms) by skylink
2019/04/13 22:39:08 724423C9 c   (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
2019/04/13 22:39:08 724423C9 c   (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0624 PROVID 000000 ECMPID 0F64 ANY CHID PMTPID 0F3C VPID 0F46
2019/04/13 22:39:09 724423C9 c      (ecm) dvbapiau (0624@000000/0000/3359/6A:340DEFACE302686FFEC737989EF64F9A): not found (4 ms) by skylink
2019/04/13 22:39:09 724423C9 c   (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
2019/04/13 22:39:09 724423C9 c   (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0624 PROVID 000000 ECMPID 0F64 ANY CHID PMTPID 0F3C VPID 0F46
2019/04/13 22:39:09 724423C9 c      (ecm) dvbapiau (0624@000000/0000/3359/6A:340DEFACE302686FFEC737989EF64F9A): not found (8 ms) by skylink
2019/04/13 22:39:09 724423C9 c   (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
2019/04/13 22:39:09 724423C9 c   (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0624 PROVID 000000 ECMPID 0F64 ANY CHID PMTPID 0F3C VPID 0F46
2019/04/13 22:39:10 1F0ED09C r   (reader) skylink [irdeto] dvbapiau emmtype=global, len=36 (hex: 0x24), cnt=0: written (73 ms)
2019/04/13 22:39:10 1F0ED09C r   (reader) skylink [irdeto] dvbapiau emmtype=global, len=36 (hex: 0x24), cnt=0: written (71 ms)
2019/04/13 22:39:10 1F0ED09C r   (reader) skylink [irdeto] dvbapiau emmtype=global, len=36 (hex: 0x24), cnt=0: written (70 ms)
2019/04/13 22:39:10 724423C9 c      (ecm) dvbapiau (0624@000000/0000/3359/6A:340DEFACE302686FFEC737989EF64F9A): not found (106 ms) by skylink

[pele1]

už sa to tu pár krát riešilo že sa karty preklápajú a že ide v CB 650 tiež

[hulec]

Konfig vyzerá OK, ja by som počkal dlhšie, kým prídu shared zápisy na kartu. Prípadne prepnuť na iné kanály.

[saxf]

@hulec, dakujem za info, nakoniec bol problém inde. Karta je NEXT, cize M7 a nepobezi v UNI citackach.

[vlada]

Ve správně nakonfigurovaných uničtečkách jede i M7

[grund]

vlada
to je otázka a nebo máš návod jak na to?

[ribicka]

Vypnem reader 0D96 a zapnem 0624 a karta sa nechce rozbehnut. Poradite prosim co mam zle nastavene?
Server je OSCAM na RPi s citackami phoenix a klient je OSCAM na DM500HD. Dakujeeem

[Steiner]

nerozbehne sa karta v oscame je niečo iné ako keď ju klient nevie čítať , z uvedeného to nie je jasné
ak to druhé tak môže byť dôvod že máš na nich rozdielny group

[11chloe]

2019/05/16 06:06:46 4D180614 r (reader) 0624_CZ [mouse] ATR: F7 AE 06 20 96 21 3C 3C
2019/05/16 06:06:46 4D180614 r (reader) 0624_CZ [mouse] ERROR: Could not read reader->convention
2019/05/16 06:06:46 4D180614 r (reader) 0624_CZ [mouse] Error activating card.

Podle logu to vypadá že mu čtečka ani nenačte kartu, takže špatná konfigurace.

[Steiner]

autospeed = 1

[ribicka]

Nastavil som kazdemu readeru group = 1 a 0624 readeru autospeed = 1

[reader]
label = 0624_CZ
description = Phoenix
protocol = mouse
device = /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A1076SPR-if00-port0
services = !sk,0624_tst
autospeed = 1
caid = 0624
boxkey = A1C6F3D8B5E1F2C1
rsakey = 79EA25A763DA2C3E02B456A13962E60BCE63E628A2C177BE951CED96A9C6131A146F98D5867B7AE6682324FD6481913C0241F065C8D3457E54BB59B7B5DE0362
force_irdeto = 1
needsemmfirst = 1
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 0,2,2,0
saveemm-g = 1

a stav je rovnaky. Karta ide ako 0d96 ale 0624 nie.

2019/05/16 18:32:50 1F456BC6 r (reader) 0624_CZ [mouse] card detected
2019/05/16 18:32:51 1F456BC6 r (reader) 0624_CZ [mouse] Buffers readed 0 bytes total time_us 75118
2019/05/16 18:32:51 33694B9A r (reader) 0D96_SK [cryptoworks] user1 emmtype=global, len=72 (hex: 0x48), cnt=0: written (52 ms)
2019/05/16 18:32:51 33694B9A r (reader) 0D96_SK [cryptoworks] user1 emmtype=global, len=72 (hex: 0x48), cnt=0: written (65 ms)
2019/05/16 18:32:52 1F456BC6 r (reader) 0624_CZ [mouse] ATR: F7 AE 06 20 96 21 3C 3C
2019/05/16 18:32:52 1F456BC6 r (reader) 0624_CZ [mouse] ERROR: Could not read reader->convention
2019/05/16 18:32:52 1F456BC6 r (reader) 0624_CZ [mouse] Error activating card.
2019/05/16 18:32:52 1F456BC6 r (reader) 0624_CZ [mouse] Buffers readed 0 bytes total time_us 75114
2019/05/16 18:32:53 33694B9A r (reader) 0D96_SK [cryptoworks] user1 emmtype=global, len=72 (hex: 0x48), cnt=0: written (66 ms)
2019/05/16 18:32:53 1F456BC6 r (reader) 0624_CZ [mouse] ATR: F7 AE 06 20 96 21 3C 3C
2019/05/16 18:32:53 1F456BC6 r (reader) 0624_CZ [mouse] ERROR: Could not read reader->convention
2019/05/16 18:32:53 1F456BC6 r (reader) 0624_CZ [mouse] Error activating card.
2019/05/16 18:32:54 1F456BC6 r (reader) 0624_CZ [mouse] Buffers readed 0 bytes total time_us 75116
2019/05/16 18:32:54 33694B9A r (reader) 0D96_SK [cryptoworks] user1 emmtype=global, len=55 (hex: 0x37), cnt=0: written (44 ms)
2019/05/16 18:32:55 1F456BC6 r (reader) 0624_CZ [mouse] ATR: F7 AE 06 20 96 21 3C 3C
2019/05/16 18:32:55 1F456BC6 r (reader) 0624_CZ [mouse] ERROR: Could not read reader->convention
2019/05/16 18:32:55 1F456BC6 r (reader) 0624_CZ [mouse] Error activating card.
2019/05/16 18:32:55 1F456BC6 r (reader) 0624_CZ [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2019/05/16 18:32:55 1F456BC6 r (reader) 0624_CZ [mouse] card initializing error
2019/05/16 18:32:56 33694B9A r (reader) 0D96_SK [cryptoworks] user1 emmtype=global, len=72 (hex: 0x48), cnt=0: written (62 ms)
2019/05/16 18:32:56 4905C986 c (ecm) user1 (0D96@000004/0000/1F41/80:891592DD42ED4158540DE0DE73CADDBA): rejected group (0 ms) - CT 1 HD (no matching reader)

[gchevalier]

mas zly ATR, musis dosiahnut aby ATR pri CYPTO a IDETO bolo rovnake,
kombinaciou frekvencie readera, prepinaca frekvencie phoenix, protokolu ....
alebo si konfig cekni v prijimaci cez Internal protokol
_http://www.streamboard.tv/oscam/wiki/CardsList

[rudich]

[reader]
label = 0624_CZ
description = Phoenix
protocol = mouse
device = /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A1076SPR-if00-port0
services = !sk,0624_tst
autospeed = 1
caid = 0624
boxkey = A1C6F3D8B5E1F2C1
rsakey = 79EA25A763DA2C3E02B456A13962E60BCE63E628A2C177BE951CED96A9C6131A146F98D5867B7AE6682324FD6481913C0241F065C8D3457E54BB59B7B5DE0362
force_irdeto = 1
detect = cd
mhz = 600
cardmhz = 357
group = 1
emmcache = 0,3,15,0
saveemm-g = 1

klienta skus cez protokol Cs357x

restart oscamu !

[ribicka]

zmenil som protokol na Cs357x
restartol oscam
ATR neviem ako zmenit

stale rovnaky stav

2019/05/16 20:32:11 2D8505D4 r (reader) 0624_CZ [mouse] card detected
2019/05/16 20:32:11 2D8505D4 r (reader) 0624_CZ [mouse] Buffers readed 0 bytes total time_us 75122
2019/05/16 20:32:12 33694B9A r (reader) 0D96_SK [cryptoworks] user1 emmtype=global, len=48 (hex: 0x30), cnt=0: written (44 ms)
2019/05/16 20:32:12 2D8505D4 r (reader) 0624_CZ [mouse] ATR: F7 AE 06 20 96 21 3C 3C
2019/05/16 20:32:12 2D8505D4 r (reader) 0624_CZ [mouse] ERROR: Could not read reader->convention
2019/05/16 20:32:12 2D8505D4 r (reader) 0624_CZ [mouse] Error activating card.
2019/05/16 20:32:13 2D8505D4 r (reader) 0624_CZ [mouse] Buffers readed 0 bytes total time_us 75122
2019/05/16 20:32:14 1B6D8B42 c (ecm) user1 (0D96@000004/0000/372D/80:F9A82F4E7991B3BC96BA03B6C447C4C5): found (87 ms) by 0D96_SK - Markiza +1 HD
2019/05/16 20:32:14 2D8505D4 r (reader) 0624_CZ [mouse] ATR: F7 AE 06 20 96 21 3C 3C
2019/05/16 20:32:14 2D8505D4 r (reader) 0624_CZ [mouse] ERROR: Could not read reader->convention
2019/05/16 20:32:14 2D8505D4 r (reader) 0624_CZ [mouse] Error activating card.
2019/05/16 20:32:15 2D8505D4 r (reader) 0624_CZ [mouse] Buffers readed 0 bytes total time_us 75116
2019/05/16 20:32:16 2D8505D4 r (reader) 0624_CZ [mouse] ATR: F7 AE 06 20 96 21 3C 3C
2019/05/16 20:32:16 2D8505D4 r (reader) 0624_CZ [mouse] ERROR: Could not read reader->convention
2019/05/16 20:32:16 2D8505D4 r (reader) 0624_CZ [mouse] Error activating card.
2019/05/16 20:32:16 2D8505D4 r (reader) 0624_CZ [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2019/05/16 20:32:16 2D8505D4 r (reader) 0624_CZ [mouse] card initializing error

[rudich]

ale v readerse si to nezmenil čo som ti vyznačil že

[ribicka]

prepac prehliadol som
cardmhz = 357
emmcache = 0,3,15,0

uz som zmenil a ide. Super, dakujem.

[gold.emilya]

PRosim vas o pomoc mam dve karty jedna 0D96 a druha 0624 a vzdy mi uprednostuje 0624 ako zmenim aby oscam uprednostnoval 0D96 ?

[peter54]

Do oscam.dvbapi si ich dáš v poradí ako to chceš.

I: 0668
P: 0D96
P: 0624
I: 0500

Druha možnosť je dat si vyssie hodnoty na lb_weight na čítačke, ktorá ma byť uprednostnena.
Napriklad
lb_weight = 500

Kedze default je 100 bude mat 500 prednosť.

Posledná možnosť je, ze na 0624 citacke zakazes services, ktoré ma čítať z 0d96.

[gold.emilya]

Do oscam.dvbapi si ich dáš v poradí ako to chceš.

I: 0668
P: 0D96
P: 0624
I: 0500

Druha možnosť je dat si vyssie hodnoty na lb_weight na čítačke, ktorá ma byť uprednostnena.
Napriklad
lb_weight = 500

Kedze default je 100 bude mat 500 prednosť.

Posledná možnosť je, ze na 0624 citacke zakazes services, ktoré ma čítať z 0d96.

Dakujem toto mam nastavene.
Dvbapi
P: 0D96
P: 0624

A tu hodnotu cim viac tym lepsie? Dobre tomu chapem? Nastavil som ale asi treba restart nezmenilo sa to zatial.

Services nechcem rusit pre istotu