Oscam a jeho nastavenie (s popisom - testovane v E2)

[drak202]

Také niečo som našiel v logu .. Pomohlo mi že som vypol zápisy z DM one a zapol som zapisy z DM800HD. Aj keď som mal kartu v DM one tak mi karta vypadávala predpokladam nejaké zlé alebo časté zapisy z one .

Kód: Vybrat vše

2020/06/02 12:01:07 6969EB4F r   (reader) skylink_dolna [irdeto] Warning: needed try nr 2, next ECM has some delay
2020/06/02 12:01:08 6969EB4F r        (-) -- Skipped 1 duplicated log lines --
2020/06/02 12:01:08 6969EB4F r   (reader) skylink_dolna [irdeto] drak emmtype=unique, len=31 (hex: 0x1F), cnt=0: error (2386 ms)
2020/06/02 12:01:09 6969EB4F r   (reader) skylink_dolna [irdeto] Warning: needed try nr 2, next ECM has some delay
2020/06/02 12:01:11 6969EB4F r        (-) -- Skipped 1 duplicated log lines --
2020/06/02 12:01:11 6969EB4F r   (reader) skylink_dolna [irdeto] dvbapiau emmtype=unique, len=96 (hex: 0x60), cnt=0: error (2383 ms)
2020/06/02 12:01:11 6969EB4F r   (reader) skylink_dolna [irdeto] Warning: needed try nr 2, next ECM has some delay
2020/06/02 12:01:13 504400DC c        (-) -- Skipped 1 duplicated log lines --
2020/06/02 12:01:13 504400DC c      (ecm) a (0624@000000/0000/1328/55:C83FADDFAAB4E888F259D12645E8F971): timeout (5000 ms) by skylink_dolna - TA3 HD  6h-1h CET
2020/06/02 12:01:13 666BB3CB c      (ecm) b (0624@000000/0000/339E/55:722E7484B2C699278F47729C7F7F5AAC): timeout (5001 ms) by skylink_dolna - Epic Drama HD
2020/06/02 12:01:13 3F4E1B4B c      (ecm) c (0624@000000/0000/3731/5C:F29189CE922A8614B5C0CD9076E7B9FA): timeout (5001 ms) by skylink_dolna (F/2/2/2) - Markiza HD
2020/06/02 12:01:13 6969EB4F r   (reader) skylink_dolna [irdeto] dvbapiau emmtype=unique, len=31 (hex: 0x1F), cnt=0: error (2382 ms)
2020/06/02 12:01:13 6C1BF7A2 c      (ecm) d (0624@000000/0000/3731/5C:F29189CE922A8614B5C0CD9076E7B9FA): timeout (5000 ms) by skylink_dolna (F/2/2/2) - Markiza HD
2020/06/02 12:01:14 666BB3CB c      (ecm) e (0D96@000004/0000/339E/80:E0D73294A0BA5C7BF855CF6553888D13): rejected group (0 ms) - Epic Drama HD (no matching reader)
2020/06/02 12:01:14 6969EB4F r        (-) -- Skipped 2 duplicated log lines --
2020/06/02 12:01:14 6969EB4F r   (reader) skylink_dolna [irdeto] Warning: needed try nr 2, next ECM has some delay
2020/06/02 12:01:14 6969EB4F r   (reader) skylink_dolna [irdeto] Maybe you have a bad Cam Key set it from config file
2020/06/02 12:01:15 6969EB4F r   (reader) skylink_dolna [irdeto] Warning: needed try nr 2, next ECM has some delay
2020/06/02 12:01:15 631075A5 c      (ecm) dvbapiau (0624@000000/0000/1C01/4F:37BEF8EC39EAF16192588A610270BAA9): timeout (5000 ms) by skylink_dolna (F/2/2/2) - JimJam CZ
2020/06/02 12:01:16 6969EB4F r   (reader) skylink_dolna [irdeto] Warning: needed try nr 2, next ECM has some delay
2020/06/02 12:01:17 6969EB4F r   (reader) skylink_dolna [irdeto] drak emmtype=global, len=12 (hex: 0x0C), cnt=0: error (2382 ms)
2020/06/02 12:01:17 6969EB4F r   (reader) skylink_dolna [irdeto] Warning: needed try nr 2, next ECM has some delay

[richmondn]

Odišiel mi Skytec prijímač a tak som si kúpil 8008, vložil kartu a začal som pozerať.

Pri prepínaní programov po niekoľkých klikoch sa stane že obraz nenabehne a programy nehrajú čo na starom prijímači sa nedialo. S najväčšou pravdepodobnosťou bude niekde chyba v SW alebo HW okolo karty lebo bekódované programy teda CT 24 ide, páni kde robím chybu? Stretol sa stým niekto? Karta je Skylink - Irdeto. Jedine čo pomôže je reštart celého prijímača
Neviete čo s tým? Ďakujem Vám

[drak202]

Hod tu tvoj config. Mne sa stalo že raz šál v configu nejaký čas a ten čas mi proste nejakú stanicu nedekodovalo

[richmondn]

Hod tu tvoj config. Mne sa stalo že raz šál v configu nejaký čas a ten čas mi proste nejakú stanicu nedekodovalo

Mno keďže Linuxový prijímač mám 1x tak poraď kde nájdem a ako stiahnem konfiguráciu v menu som videl že sa dá vytvoriť záloha asi na USB tak to skúsim.

Ďakujem

[drak202]

Dáš do internetového prehliadača ip adresu : port oscamu väčšinou je port 8888 a tam si nájdeš files a config

[9000peter]

Hod tu tvoj config. Mne sa stalo že raz šál v configu nejaký čas a ten čas mi proste nejakú stanicu nedekodovalo

Mno keďže Linuxový prijímač mám 1x tak poraď kde nájdem a ako stiahnem konfiguráciu v menu som videl že sa dá vytvoriť záloha asi na USB tak to skúsim.

Ďakujem

V prvom rade si prečítaj toto keď už máš ten Linux....
http://www.ab-forum.info/viewtopic.php?f=76&t=71265

[richmondn]

Super Ďakujem

[MartinS]

Ahoj, poradili byste mi s nastavením oscamu v Octagonu SF8008?
Použivám OSCam r11578 v SAPRO Image pre Octagon SF8008 1.1oa a Skylink kartu "Irdeto" ICE01.
Už jsem vyzkoušel z tohoto a jiných fór různá nastavení oscamu, ale vše špatně.
Nyní mi oscamlog hlásí toto:

Kód: Vybrat vše

2020/06/10 17:18:47 00000000 s     (main) System name    = Linux
2020/06/10 17:18:47 00000000 s     (main) Host name      = sf8008
2020/06/10 17:18:47 00000000 s     (main) Release        = 4.4.35
2020/06/10 17:18:47 00000000 s     (main) Version        = #1 SMP Fri Apr 17 14:42:10 UTC 2020
2020/06/10 17:18:47 00000000 s     (main) Machine        = armv7l
2020/06/10 17:18:47 00000000 s     (main) Stb model      = dm8000
2020/06/10 17:18:47 00000000 s     (main) Stb boxtype    = sf8008
2020/06/10 17:18:47 00000000 s     (main) creating pidfile /var/tmp/oscam-trunk.pid with pid 8205
2020/06/10 17:18:47 00000000 s   (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
2020/06/10 17:18:47 00000000 s   (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2020/06/10 17:18:47 00000000 s     (main) signal handling initialized
2020/06/10 17:18:47 00000000 s   (config) 394 provid's loaded
2020/06/10 17:18:47 00000000 s   (config) 152 service-id's loaded in 1 ms
2020/06/10 17:18:47 00000000 s   (config) 57 tier-id's loaded
2020/06/10 17:18:47 00000000 s      (led) LED support is not active. Can't detect machine type.
2020/06/10 17:18:47 00000000 s   (reader) Skylink_Irdeto [internal] creating thread for device /dev/sci0
2020/06/10 17:18:47 00000000 s     (main) waiting for local card init
2020/06/10 17:18:47 15C952BA h    (webif) webif: decompressed 172181 bytes back into 414344 bytes
2020/06/10 17:18:47 15C952BA h    (webif) HTTP Server running. ip=0.0.0.0 port=8888
2020/06/10 17:18:48 24DE9B42 r   (reader) Skylink_Irdeto [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=600, cardmhz=600)
2020/06/10 17:18:48 24DE9B42 r   (reader) Skylink_Irdeto [internal] Reader sci internal, detected box type: sf8008
2020/06/10 17:18:48 24DE9B42 r   (reader) Skylink_Irdeto [internal] card detected
2020/06/10 17:18:49 24DE9B42 r   (reader) Skylink_Irdeto [internal] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00 
2020/06/10 17:18:51 24DE9B42 r   (reader) Skylink_Irdeto [internal] Hist. Bytes: TĦ#3;
2020/06/10 17:18:51 24DE9B42 r   (reader) Skylink_Irdeto [internal] detect irdeto card
2020/06/10 17:18:51 24DE9B42 r   (reader) Skylink_Irdeto [internal] Warning: needed try nr 2, next ECM has some delay
2020/06/10 17:18:53 24DE9B42 r   (reader) Skylink_Irdeto [internal] Warning: needed try nr 2, next ECM has some delay
2020/06/10 17:18:53 24DE9B42 r   (reader) Skylink_Irdeto [internal] card detected
2020/06/10 17:18:53 24DE9B42 r   (reader) Skylink_Irdeto [internal] type: CryptoWorks
2020/06/10 17:18:54 24DE9B42 r   (reader) Skylink_Irdeto [internal] Warning: needed try nr 2, next ECM has some delay
2020/06/10 17:18:55 24DE9B42 r   (reader) Skylink_Irdeto [internal] card system not supported
2020/06/10 17:18:55 24DE9B42 r   (reader) Skylink_Irdeto [internal] Normal mode failed, reverting to Deprecated Mode
2020/06/10 17:18:55 24DE9B42 r   (reader) Skylink_Irdeto [internal] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00 
2020/06/10 17:18:57 24DE9B42 r   (reader) Skylink_Irdeto [internal] Hist. Bytes: TĦ#3;
2020/06/10 17:18:57 24DE9B42 r   (reader) Skylink_Irdeto [internal] detect irdeto card
2020/06/10 17:18:57 24DE9B42 r   (reader) Skylink_Irdeto [internal] caid: 0624, acs: 0.06, country code: CZE
2020/06/10 17:18:57 24DE9B42 r   (reader) Skylink_Irdeto [internal] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2020/06/10 17:18:57 24DE9B42 r   (reader) Skylink_Irdeto [internal] WARNING: For Irdeto cards you will have to set 'mhz= 600' in oscam.server
2020/06/10 17:18:58 24DE9B42 r   (reader) Skylink_Irdeto [internal] active providers: 4 (bd26ff,ffffff,ffffff,ffffff)
2020/06/10 17:18:58 24DE9B42 r   (reader) Skylink_Irdeto [internal] found card system irdeto
2020/06/10 17:18:58 24DE9B42 r   (reader) Skylink_Irdeto [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max allotted of 1
2020/06/10 17:18:58 24DE9B42 r   (reader) Skylink_Irdeto [irdeto] entitlements for provider: 1, id: BD26FF
2020/06/10 17:18:58 24DE9B42 r   (reader) Skylink_Irdeto [irdeto] chid: 1392, date: 2013/07/25 - 2013/08/14
2020/06/10 17:18:58 24DE9B42 r   (reader) Skylink_Irdeto [irdeto] chid: FFB0, date: 2020/06/09 - 2020/07/10
2020/06/10 17:18:58 24DE9B42 r   (reader) Skylink_Irdeto [irdeto] chid: 07DF, date: 2020/06/09 - 2020/07/10
2020/06/10 17:18:58 24DE9B42 r   (reader) Skylink_Irdeto [irdeto] chid: 03E9, date: 2020/06/09 - 2020/07/10
2020/06/10 17:18:58 24DE9B42 r   (reader) Skylink_Irdeto [irdeto] chid: 03EA, date: 2020/06/09 - 2020/07/10
2020/06/10 17:18:58 24DE9B42 r   (reader) Skylink_Irdeto [irdeto] chid: 03EB, date: 2020/06/09 - 2020/07/10
2020/06/10 17:18:58 24DE9B42 r   (reader) Skylink_Irdeto [irdeto] chid: 03EC, date: 2020/06/09 - 2020/07/10
2020/06/10 17:18:58 24DE9B42 r   (reader) Skylink_Irdeto [irdeto] chid: 03ED, date: 2020/06/09 - 2020/07/10
2020/06/10 17:18:58 24DE9B42 r   (reader) Skylink_Irdeto [irdeto] chid: 1771, date: 2020/06/09 - 2020/07/10
2020/06/10 17:18:58 24DE9B42 r   (reader) Skylink_Irdeto [irdeto] chid: 7FFE, date: 2020/06/10 - 2020/07/10
2020/06/10 17:18:58 24DE9B42 r   (reader) Skylink_Irdeto [irdeto] chid: 7FFD, date: 2020/06/10 - 2020/06/20
2020/06/10 17:18:58 24DE9B42 r   (reader) Skylink_Irdeto [irdeto] chid: FFD8, date: 2020/06/10 - 2020/06/20
2020/06/10 17:18:58 24DE9B42 r   (reader) Skylink_Irdeto [irdeto] chid: 7FFC, date: 2020/06/10 - 2020/07/10
2020/06/10 17:18:58 24DE9B42 r   (reader) Skylink_Irdeto [irdeto] chid: FFE0, date: 2020/06/09 - 2020/07/10
2020/06/10 17:18:58 24DE9B42 r   (reader) Skylink_Irdeto [irdeto] ready for requests
2020/06/10 17:18:59 00000000 s     (main) init for all local cards done
2020/06/10 17:18:59 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2020/06/10 17:18:59 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2020/06/10 17:18:59 7407771E c   (client) plain dvbapi-client granted (dvbapiau, au=auto (1 reader))
2020/06/10 17:18:59 7407771E c   (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam-trunk/oscam.ccache
2020/06/10 17:18:59 7407771E c   (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum number of filters is 38 (oscam limit is 64)
2020/06/10 17:18:59 7407771E c   (dvbapi) Detected /dev/dvb/adapter0/ca0 device, total available descramblers: 16
2020/06/10 17:18:59 7407771E c   (dvbapi) PMT mode 6: Connecting to enigma CA PMT listen socket...
2020/06/10 17:18:59 7407771E c   (dvbapi) PMT mode 6: Successfully connected to CA PMT server (fd 12)
2020/06/10 17:18:59 7407771E c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 0624 ECM_PID: 0474 PROVID: 000000 
2020/06/10 17:18:59 7407771E c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 0D96 ECM_PID: 0475 PROVID: 000000 
2020/06/10 17:18:59 7407771E c   (dvbapi) Demuxer 0 ecmpid 2 CAID: 0500 ECM_PID: 0476 PROVID: 051910 
2020/06/10 17:18:59 7407771E c   (dvbapi) Demuxer 0 found 3 ECM pids and 8 STREAM pids in CA PMT
2020/06/10 17:18:59 7407771E c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0624 PROVID 000000 ECMPID 0474 ANY CHID PMTPID 044C VPID 0456
2020/06/10 17:18:59 24DE9B42 r   (reader) Skylink_Irdeto [irdeto] Maybe you don't have the entitlements for this channel
2020/06/10 17:18:59 7407771E c      (ecm) dvbapiau (0624@000000/0000/1F41/5C:D56954D47C1B02AF9439692D31E2A747): not found (118 ms) by Skylink_Irdeto - CT 1 HD
2020/06/10 17:19:00 7407771E c   (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 2 disabled ecmpids!
2020/06/10 17:19:00 7407771E c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0624 PROVID 000000 ECMPID 0474 ANY CHID PMTPID 044C VPID 0456
2020/06/10 17:19:00 7407771E c      (ecm) dvbapiau (0624@000000/0000/1F41/5C:D56954D47C1B02AF9439692D31E2A747): not found (1 ms) by Skylink_Irdeto - CT 1 HD
2020/06/10 17:19:01 7407771E c   (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 1 enabled and 2 disabled ecmpids!
2020/06/10 17:19:01 7407771E c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0624 PROVID 000000 ECMPID 0474 ANY CHID PMTPID 044C VPID 0456
2020/06/10 17:19:01 7407771E c      (ecm) dvbapiau (0624@000000/0000/1F41/5C:D56954D47C1B02AF9439692D31E2A747): not found (1 ms) by Skylink_Irdeto - CT 1 H

pro upřesnění-nastavení:
Oscam.conf

Kód: Vybrat vše

[global]
disablelog                    = 0
logfile = /tmp/oscam.log
usrfile = /tmp/oscamuser.log
preferlocalcards = 2
logduplicatelines             = 1
clientmaxidle                 = 180
nice                          = -10
maxlogsize                    = 300
unlockparental                = 1
waitforcards                  = 1
preferlocalcards              = 2
dropdups                      = 1
block_same_ip                 = 0
block_same_name               = 0
lb_save                       = 100
lb_min_ecmcount               = 3
lb_retrylimit                 = 1600
lb_auto_betatunnel            = 0

[dvbapi]
enabled                       = 1
au                            = 1
pmt_mode                      = 6
user                          = dvbapiau
boxtype                       = dreambox

[webif]
httpport                      = 8888
httprefresh                   = 5
httpshowpicons                = 1
httpallowed                   = 10.0.0.0-255.255.255.255
aulow                         = 120

Oscam.user

Kód: Vybrat vše

[account]
user                          = dvbapiau
au                            = 1
group                         = 1

Oscam.server

Kód: Vybrat vše

[reader]
label                         = Skylink_Irdeto
description                   = ICE_Irdeto_0624
enable                        = 1
protocol                      = internal
device                        = /dev/sci0
pincode                       = 0000
caid                          = 0624
rsakey                        = 79EA25A763DA2C3E02B456A13962E60BCE63E628A2C177BE951CED96A9C6131A146F98D5867B7AE6682324FD6481913C0241F065C8D3457E54BB59B7B5DE0362
boxkey                        = A1C6F3D8B5E1F2C1
fix07 = 0
force_irdeto                  = 1
detect                        = cd
mhz = 600
cardmhz                       = 600
group                         = 1

oscam.dvbapi

Kód: Vybrat vše

P: 0624
I: 0666
I: 0D96

Díky předem za každou dobrou radu.

[peter54]

Chlapci, si myslíte, že tu niekto bude kazdy den analyzovať gebuziny co si dávate do configov?
Este sa 3 dni modliť aby ste poskytli relevantné info.
Nebol by problem, kazdy vsak chcete to isté a vase problemy su tu 100x vyriešené.
Prestaňte strieľať do vzduchu a prečítajte si navod, ako to ma byť a spravte podľa toho.
Viac nez je v slavnej prirucke od vlado222 vam tu aj tak nikto neporadi.
Inštalujeme a konfigurujeme linuxový satelitný prijímač
Veľa šťastia pri nastavovaní.

@MartinS: nic nebude kym neprejdu zapisy a mas blbo frekvencie.
@richmondn: stale malo informácií.

[MartinS]

@peter54 Díky za odkaz...příručka je skvěle zpracovaná. Omlouvám se za obtěžování - občas stačí jen popostrčit

[richmondn]

Ak vypadne kanál stačí reload Readers
Ďakujem za pomoc
Oscam. config

Kód: Vybrat vše

[global]
logfile                       = 0
disablelog                    = 1
fallbacktimeout               = 2000
clientmaxidle                 = 600
nice                          = 0
serialreadertimeout           = 150
maxlogsize                    = 0
preferlocalcards              = 2
cacheexwaittime               = 100
cacheexenablestats            = 1
lb_mode                       = 1
lb_save                       = 1500
lb_nbest_readers              = 5
lb_nfb_readers                = 10
lb_max_ecmcount               = 900
lb_reopen_seconds             = 300
lb_retrylimit                 = 900
lb_savepath                   = 
lb_stat_cleanup               = 240
lb_reopen_mode                = 1

[monitor]
port                          = 988
aulow                         = 120
hideclient_to                 = 15
monlevel                      = 0

[dvbapi]
enabled                       = 1
au                            = 1
boxtype                       = dreambox
user                          = dvbapiau

[webif]
httpport                      = 8888
httprefresh                   = 5
httpallowed                   = 10.0.0.1-255.255.255.255

[EnoSat]

naco si tam nastavujes casy, ked sa potom stazujes ze to musis rucne obnovovat

[gchevalier]

@richmondn
vypni LB alebo nastav fallback reader a aby ignoroval LB

[dlhe_pole]

@richmondn
vypni LB alebo nastav fallback reader a aby ignoroval LB

tak loadballancer je najvacsia kravina aka moze byt u oscamu .. kazdy trtko to automaticky zapina a potom sa cuduje ked mu to hadze sem tam not found a podobne chu*oviny.. akurat som to aj pisal na streamboard jednemu komercnemu arabacovi

[gchevalier]

LB ma specificke vyuzitie, najme ked je viac readrov s rovnakym caid (vacsinou pri vacsich serveroch), lokalnych alebo vzdialenych a chcem
- aby mi odpovedal vzdy najrychejsi
- aby rozdeloval poziadavky striedavo medzi readre

takze nejake vyuzitie to ma, len treba vediet ako to pouzit, pre homeshare je to asi zbytocne (lb_mode = 0), a co je zvlastna vlastnost ze staci jedna odpoved "not found" a dany sid je uz blokovany na danom readri - pokial to neni vytunene

[dlhe_pole]

a preco chces aby ti odpovedal vzdy najrychlejsi ? roztried si karty podla services, pouzival cache ext3 a nebudes mat ziaden problem z not found, bud ti to pojde z readera ako found alebo cache1 pri local karte alebo cache2 pri vzdialenom servery alebo cache3 ulozene na spolocnej cache.. ved medzi dvoma dcw mas cca 11-13 sekund cas tak preco to nevyuzivat ked maju na tom postaveny biznis cinani ktory takto prijimaju dcw z abshitoboxov pripjenych na net a preposielaju ich dalej

[richmondn]

Chlopy ten prijímač som kúpil a bol nakonfigurovaný, teraz študujem ako ho správne nastaviť len na SkyLink kartu kôli deťom ale inak ak bude čas sa pustím do štúdia konfigurácie prijímača,

Prehodil som ako ste mi napísali "LB_mode=0" a tak uvidím či čítačka začne poslúchať

Ďakujem za pomoc a Váš čas.

[richmondn]

V4era som konečne nastavil čo ste mi poradili a nakoniec aj tak pri prepínaní programov som zasa musel reštartovať OScam

čo ešte by mohlo byť? špatné????

[gchevalier]

@richmondn
skontroluj ci mas v oscam.dvbapi

Kód: Vybrat vše

P:0624
I:0500
I:0D96

otazka je ci oscam spadne alebo ide dalej len prestane dekodovat (vypis livelog)
ak spadne tak samonastartovanie sa prida paremetrom -r 2 do spustacieho skriptu
napr.

Kód: Vybrat vše

/usr/bin/oscam -b -B -r 2 -w 1 -c /var/tuxbox/config

aka je verzia oscamu

[peter54]

@gchevalier: musis sa k nemu viacej modliť. Ten chlap neprezradí a neprezradi. Proste GDPR - nedajbože aby sa jeho jedinečné tajné konfiguraky a logy dostali k nepriatelovi.