Karta - freeSAT (0D97-0653)

[aszotek]

No ja to nastavuji pres files. a mas pravdu. jak na to klikacu kliknu u readers tak tam to dynamic neni boha. Jak to ??

[jajo4546]

nuz uz nemam freesat cili neviem ci uz maju vyssie zabezpecenie L2B
ak ano tak potrebujes oscam kde ked vojdes do nastaveni budes mat dyn cam
na cs-f to pisu, ze im to na L2B ide
pri L2B
rsakey = FFFFFFFFFF722B.....

[aszotek]

ale to u tohoto psalo tady v tomto vlaknu:
takze co prinasaju tieto binarky

- obe vedia freesat kartu zinicializovat v l2b mode. skylink tu nebude fungovat
- ako bonus je podpora multisid, t.j napriklad na karte s najnizsim balickom moze is toho trosku viac (tu bu sa hodil podrobny report tiers a co ide naviac - najma cz karty)
- podpora iba internej citacky, protokoly newcamd, cccam, cs378x
- obmedzenie na 4 sids v tom istom case (pre domace zdielanie je to az az)


i na webcf to pise :

Version: oscam-1.20_fr**sat_L2b-r11704
Compiler: arm-linux-gnueabihf-ssl
Box type: sf8008 (generic)

[jajo4546]

tak si zle prekopcil oscam bin
najprv musis oscam zastavit aby nebezal
az potom ho prepises, inak nie a pravdepodobne to je tvoj pripad a mas stary oscam bez L2b

[aszotek]

Tak znova. vypl jsem oscam. normalne dal ne. restartl box. pres winscp ve var bin smazal ten oscam co se spousti, nakopiroval ten stazeny, prejmenoval stejne a nastavil stejne atributy jak u ostatnich. Snad je postou OK

[jajo4546]

a skusal si binarky z cs-f ?

[aszotek]

Tam jsem nehledal. vetsinou tady. a tu je na strane 13

[jajo4546]

ak ti nepojde terajsia tak skus aj ich

[aszotek]

Ne je to uplně stejne. Dynamickey tam neni. je to naprosto identicek jak pred chvíli. Tak jsem to delal asi dobre.

ach jo. Tkaze zase hledat nejaky jiny oscam. Už nevidím na oci po 12náctce a zítra dalsí. A vecer jsem slíbil že to deckam pojede na chate

[jajo4546]

https://cs-forum.eu/viewtopic.php?t=4
ale netusim ci ma podporu freesat

[aszotek]

jdu zkusit ten posledni teda ten 11715

[aszotek]

dal jsem jiny posledni co je na tom odkazu a je jine nastaveni vice toho tam ale dynamic key neni. A chova se to stejne... Mám zkusit dalsí? jestli tam nebude?

[jajo4546]

Skontroluj si nastavenia čítačky či to máš správne na L2b

[aszotek]

no u toho prvniho to psalo freesat ale zas tam nebyl ten dynamic key. Me fakt střelí

[aszotek]

Skontroluj si nastavenia čítačky či to máš správne na L2b

no asi nekolikkrát to tu je ale takto to mam

[reader]
label = Freesat_-_irdeto
protocol = internal
device = /dev/sci0
caid = 0653
force_irdeto = 1
detect = cd
mhz = 450
cardmhz = 2700
group = 1

[jajo4546]

Ak tam nie je dyncam tak potrebuješ boxkey aj rsakey
Teraz tam nemáš ani jedno

[aszotek]

Já už nevím jak to napsat. Je fajn tato věta. Ale co to znamená. CO mám udělet a udělám to a napášu to tam.

[aszotek]

Citujem zo stránky Skylinku
"Pri prechode na Astar 23,5E musíte o to požiadťa Freesat a tí Vám musia preklopiť kartu na 23,5E a musíte si predplatiť balík na 23,5E ( viac info u Freesatu)."
Máš to?

Mám druhou kartu jako novou. Nemám žadnou překlopenou ale novou druhou službu freesat z 23.5. Prostě už i kartu mam vyměněnou a voali mi jejich IT jeslti už to jede

[aszotek]

Tak nic.
Nic nejede
Tak už nevím

Kód: Vybrat vše

2023/06/30 10:02:44 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11715 (arm-linux-gnueabihf)
2023/06/30 10:02:44 00000000 s debug_level=66
2023/06/30 10:02:44 00000000 s     (main) System name    = Linux
2023/06/30 10:02:44 00000000 s     (main) Host name      = sf8008
2023/06/30 10:02:44 00000000 s     (main) Release        = 4.4.35
2023/06/30 10:02:44 00000000 s     (main) Version        = #1 SMP Mon Dec 24 06:39:12 UTC 2018
2023/06/30 10:02:44 00000000 s     (main) Machine        = armv7l
2023/06/30 10:02:44 00000000 s     (main) Stb model      = dm8000
2023/06/30 10:02:44 00000000 s     (main) Stb boxtype    = sf8008
2023/06/30 10:02:44 00000000 s     (main) creating pidfile /var/tmp/oscam-emu.pid with pid 7363
2023/06/30 10:02:44 00000000 s   (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2023/06/30 10:02:44 00000000 s     (main) signal handling initialized
2023/06/30 10:02:44 00000000 s   (config) 1 provid's loaded
2023/06/30 10:02:44 00000000 s   (config) 1 service-id's loaded in 0 ms
2023/06/30 10:02:44 00000000 s      (net) cccam: initialized (fd=5, port=12000)
2023/06/30 10:02:44 00000000 s   (reader) SLOT [internal] creating thread for device /dev/sci0
2023/06/30 10:02:44 00000000 s     (main) waiting for local card init
2023/06/30 10:02:44 58A06B13 h    (webif) webif: decompressed 159545 bytes back into 386200 bytes
2023/06/30 10:02:44 58A06B13 h    (webif) HTTP Server running. ip=0.0.0.0 port=83
2023/06/30 10:02:44 24639E0B r   (reader) SLOT [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=600, cardmhz=600)
2023/06/30 10:02:44 24639E0B r   (reader) SLOT [internal] Reader sci internal, detected box type: sf8008
2023/06/30 10:02:45 24639E0B r   (reader) SLOT [internal] card detected
2023/06/30 10:02:45 24639E0B r   (reader) SLOT [internal] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00 
2023/06/30 10:02:47 24639E0B r   (reader) SLOT [internal] Hist. Bytes: TÄ
2023/06/30 10:02:47 24639E0B r   (reader) SLOT [internal] detect irdeto card
2023/06/30 10:02:47 24639E0B r   (reader) SLOT [internal] Warning: needed try nr 2, next ECM has some delay
2023/06/30 10:02:48 24639E0B r        (-) -- Skipped 1 duplicated log lines --
2023/06/30 10:02:48 24639E0B r   (reader) SLOT [internal] card detected
2023/06/30 10:02:48 24639E0B r   (reader) SLOT [internal] type: CryptoWorks
2023/06/30 10:02:49 24639E0B r   (reader) SLOT [internal] Warning: needed try nr 2, next ECM has some delay
2023/06/30 10:02:49 24639E0B r   (reader) SLOT [internal] card system not supported
2023/06/30 10:02:49 24639E0B r   (reader) SLOT [internal] Normal mode failed, reverting to Deprecated Mode
2023/06/30 10:02:50 24639E0B r   (reader) SLOT [internal] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00 
2023/06/30 10:02:52 24639E0B r   (reader) SLOT [internal] Hist. Bytes: TÄ
2023/06/30 10:02:52 24639E0B r   (reader) SLOT [internal] detect irdeto card
2023/06/30 10:02:52 24639E0B r   (reader) SLOT [internal] Irdeto SC 58 version 21 revision 1, patch level e
2023/06/30 10:02:52 24639E0B r   (reader) SLOT [internal] caid: 0653, acs: 0.05, country code: CZE
2023/06/30 10:02:52 24639E0B r   (reader) SLOT [internal] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2023/06/30 10:02:52 24639E0B r   (reader) SLOT [internal] OwnerID: 01 A8 
2023/06/30 10:02:52 24639E0B r   (reader) SLOT [internal] Rand.4b: 0A 3B D5 F7 
2023/06/30 10:02:52 24639E0B r   (reader) SLOT [internal] WARNING: For Irdeto cards you will have to set 'mhz= 600' in oscam.server
2023/06/30 10:02:53 24639E0B r   (reader) SLOT [internal] active providers: 4 (ba4cff,ffffff,ffffff,ffffff)
2023/06/30 10:02:53 24639E0B r   (reader) SLOT [internal] found card system irdeto
2023/06/30 10:02:53 24639E0B r   (reader) SLOT [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max allotted of 1
2023/06/30 10:02:53 24639E0B r   (reader) SLOT [irdeto] ready for requests
2023/06/30 10:02:54 00000000 s     (main) init for all local cards done
2023/06/30 10:02:54 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2023/06/30 10:02:54 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2023/06/30 10:02:54 00000000 s     (gbox) local gbox failed init
2023/06/30 10:02:54 1172DD7E c   (client) plain dvbapi-client granted (LOCAL, au=auto (1 reader))
2023/06/30 10:02:54 1172DD7E c   (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam-emu/oscam.ccache
2023/06/30 10:02:54 1172DD7E c   (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum number of filters is 39 (oscam limit is 64)
2023/06/30 10:02:54 1172DD7E c   (dvbapi) Detected /dev/dvb/adapter0/ca0 device, total available descramblers: 16
2023/06/30 10:02:54 1172DD7E c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 0624 ECM_PID: 0474 PROVID: 000000 
2023/06/30 10:02:54 1172DD7E c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 0D96 ECM_PID: 0475 PROVID: 000000 
2023/06/30 10:02:54 1172DD7E c   (dvbapi) Demuxer 0 ecmpid 2 CAID: 0500 ECM_PID: 0476 PROVID: 051910 
2023/06/30 10:02:54 1172DD7E c   (dvbapi) Demuxer 0 ecmpid 3 CAID: 0653 ECM_PID: 047B PROVID: 000000 
2023/06/30 10:02:54 1172DD7E c   (dvbapi) Demuxer 0 ecmpid 4 CAID: 0B02 ECM_PID: 047C PROVID: 000000 
2023/06/30 10:02:54 1172DD7E c   (dvbapi) Demuxer 0 ecmpid 5 CAID: 181D ECM_PID: 047D PROVID: 000000 
2023/06/30 10:02:54 1172DD7E c   (dvbapi) Demuxer 0 found 6 ECM pids and 8 STREAM pids in CA PMT
2023/06/30 10:02:54 1172DD7E c   (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 0653 PROVID 000000 ECMPID 047B ANY CHID PMTPID 044C VPID 0456
2023/06/30 10:02:54 1172DD7E c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0624 PROVID 000000 ECMPID 0474 ANY CHID PMTPID 044C VPID 0456
2023/06/30 10:02:55 1172DD7E c      (ecm) LOCAL (0653&/1F41/047B/1B59/3C_00000000000000000000000000000000 HOP:00:0000_0000): not found (135 ms) by SLOT - CT 1 HD (SLOT do_cmd [19] 9e 00)
2023/06/30 10:02:55 1172DD7E c      (ecm) LOCAL (0624&/1F41/0474/0000/5C_00000000000000000000000000000000 HOP:00:0000_0000): not found (138 ms) by SLOT - CT 1 HD (er.90 unsubscribed channel)
2023/06/30 10:02:55 1172DD7E c      (ecm) LOCAL (0653&/1F41/047B/1B5A/3C_00000000000000000000000000000000 HOP:00:0000_0000): not found (102 ms) by SLOT - CT 1 HD (er.90 unsubscribed channel)
2023/06/30 10:02:55 1172DD7E c      (ecm) LOCAL (0653&/1F41/047B/1B5B/3C_00000000000000000000000000000000 HOP:00:0000_0000): not found (136 ms) by SLOT - CT 1 HD (SLOT do_cmd [19] 9e 00)
2023/06/30 10:02:56 1172DD7E c      (ecm) LOCAL (0653&/1F41/047B/1F42/3C_00000000000000000000000000000000 HOP:00:0000_0000): not found (102 ms) by SLOT - CT 1 HD (er.90 unsubscribed channel)
2023/06/30 10:02:56 1172DD7E c   (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 2 enabled and 4 disabled ecmpids!
2023/06/30 10:02:56 1172DD7E c   (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 0653 PROVID 000000 ECMPID 047B ANY CHID PMTPID 044C VPID 0456
2023/06/30 10:02:56 1172DD7E c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0624 PROVID 000000 ECMPID 0474 ANY CHID PMTPID 044C VPID 0456
2023/06/30 10:02:56 1172DD7E c      (ecm) LOCAL (0653&/1F41/047B/1B59/3C_00000000000000000000000000000000 HOP:00:0000_0000): not found (1 ms) by SLOT - CT 1 HD
2023/06/30 10:02:56 1172DD7E c      (ecm) LOCAL (0624&/1F41/0474/0000/5C_00000000000000000000000000000000 HOP:00:0000_0000): not found (1 ms) by SLOT - CT 1 HD
2023/06/30 10:02:56 1172DD7E c      (ecm) LOCAL (0653&/1F41/047B/1B5A/3C_00000000000000000000000000000000 HOP:00:0000_0000): not found (1 ms) by SLOT - CT 1 HD
2023/06/30 10:02:57 1172DD7E c      (ecm) LOCAL (0653&/1F41/047B/1B5B/3C_00000000000000000000000000000000 HOP:00:0000_0000): not found (1 ms) by SLOT - CT 1 HD
2023/06/30 10:02:57 1172DD7E c      (ecm) LOCAL (0653&/1F41/047B/1F42/3C_00000000000000000000000000000000 HOP:00:0000_0000): not found (1 ms) by SLOT - CT 1 HD
2023/06/30 10:02:57 1172DD7E c   (dvbapi) Demuxer 0 restarting decoding requests after 0 ms with 2 enabled and 4 disabled ecmpids!
2023/06/30 10:02:57 1172DD7E c   (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 0653 PROVID 000000 ECMPID 047B ANY CHID PMTPID 044C VPID 0456
2023/06/30 10:02:57 1172DD7E c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0624 PROVID 000000 ECMPID 0474 ANY CHID PMTPID 044C VPID 0456

[efendy55]

ja mám readers na 0653 nastavené takto v pc . tiež bývalá 0D97 a terazky frčí na 0653 s 23,5 a ide to ako s praku. OSCAM-11715.
+samozrejme v dvbapi mám toto:

Kód: Vybrat vše

P:0653
I:0

Kód: Vybrat vše

[reader]
label                         = Skylink-CZ
protocol                      = mouse
device                        = /dev/ttyUSB0
pincode                       = 0000
caid                          = 0653
boxkey                        = 91D2DC38E828CA01
rsakey                        = FFFFFFFFFF722BEAF9F05AEA0897D355EF89144EDA9FBE91121A07F653A1CDEBD4C4292DD74F2D42DA03EDDF16484E3F07AE747F6CBA9E0FC71CDB7312A03ACB
fix07                         = 0
force_irdeto                  = 1
detect                        = cd
nagra_read                    = 1
mhz                           = 600
group                         = 1

[reader]
label                         = Skylink-SK
protocol                      = mouse
device                        = /dev/ttyUSB1
pincode                       = 0000
caid                          = 0653
boxkey                        = 2549D7843C6D43CA
rsakey                        = FFFFFFFFFF722BEAF9F05AEA0897D355EF89144EDA9FBE91121A07F653A1CDEBD4C4292DD74F2D42DA03EDDF16484E3F07AE747F6CBA9E0FC71CDB7312A03ACB
fix07                         = 0
force_irdeto                  = 1
detect                        = cd
nagra_read                    = 1
mhz                           = 600
group                         = 2