SSD Patriot Burst 120 GB ako Moutnut?

[JohnCenaWWE.]

Ahojte ako moutnem tento SSD disk v azboxe,mam open pli 7.0 kernel 3.3.1.
ked dopisem v etc/fstab /dev/sdb1 /media/hdd auto defaults 0 0

skusal som aj v telnete dopisat to co je v fstab ale pise vid.obr.
v menu/pevny disk ho vidi ,ale ani GSU,ani TS Panel ho nevydi,chcel by som tam nahravat ,poradte

[Kasr]

Neni subor, alebo priecinok.
Najprv musis vytvorit priecinok hdd v zlozke media.
Ale toto cez telnet ti aj tak mountne iba jednorazovo.
Vsak aj v openpli bud je, alebo sa da stiahnut mount manager.
Samozrejme ide dopisanim do fstab, ale cez mountmanager to budes mat jednoduchsie.
A inac ludia par krat priniesli hlivy z lesa.

[gchevalier]

neexistuje /dev/sdb1
najprv treba disk inicializovat cez menu, ak je to exfat formatovany vo win tak pri mounte mu to treba povedat a mozno aj prislusne zformatovat ..

Kód: Vybrat vše

fdisk /dev/sdb

a

Kód: Vybrat vše

p

potom vypise ake existuju particie a akeho su typu

[JohnCenaWWE.]

fdisk pise not found

[gchevalier]

dať sem výstup z

Kód: Vybrat vše

dmesg  | grep sd

[JohnCenaWWE.]

Kód: Vybrat vše

root@azboxhd:~# dmesg  | grep sd[J








 grep sd[J[8D
 grep sd[J[8D
 grep sd[J[8D
 grep sd

.110000] Ans2reset: warm reset needed.
[90566.110000] scard_set_param :: clk = 27 | tangox_get_sysclock() = 200250000 | frequency = 3686400 | Mode = 4 | OC = 0
[90566.120000] Set param..>> Last_rev_msb = 1 || Last_rev_pol = 1
[90566.350000] Sleep for 100 jiffies.
[90567.350000] Got response from 5V setting ..
[90567.350000] Answering: 0x80 0x80 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x80 0x80 0x80 0x00 0x00 0x80 0x00 0x00 0x80 0x00 0x80 0x00 0x00 0x00 0x80 0x00 
[90567.370000] Ans2reset: warm reset needed.
[90567.370000] scard_set_param :: clk = 27 | tangox_get_sysclock() = 200250000 | frequency = 3686400 | Mode = 4 | OC = 0
[90567.390000] Set param..>> Last_rev_msb = 1 || Last_rev_pol = 0
[90567.580000] Sleep for 100 jiffies.
[90568.580000] Got response from 5V setting ..
[90568.580000] Answering: 0xff 0xff 0xff 
[90568.880000] IOCTL_SET_DEACTIVATE
[90569.680000] DCW SET: CA[0], DESCR[0], parity[0]
[90569.680000] DCW :e1 6d 75 c3 65 dc 9a db                          .mu.e...
[90569.900000] IOCTL_SET_RESET
[90569.900000] scard_set_param :: clk = 27 | tangox_get_sysclock() = 200250000 | frequency = 3686400 | Mode = 5 | OC = 0
[90569.920000] Set param..>> Last_rev_msb = 0 || Last_rev_pol = 0
[90570.100000] Sleep for 100 jiffies.
[90571.100000] Got response from 5V setting ..
[90571.100000] Answering: 0x10 0x8a 0x9f 0xfb 0x96 0x7b 0x33 0xdb 
[90571.120000] Ans2reset: warm reset needed.
[90571.120000] scard_set_p
aram :: clk = 27 | tangox_get_sysclock() = 200250000 | frequency = 3686400 | Mode = 5 | OC = 0
[90571.130000] Set param..>> Last_rev_msb = 0 || Last_rev_pol = 1
[90571.320000] Sleep for 100 jiffies.
[90572.320000] Got response from 5V setting ..
[90572.320000] Answering: 0xef 0x75 0x60 0x04 0x69 0x84 0xcc 0x24 
[90572.330000] Ans2reset: warm reset needed.
[90572.330000] scard_set_param :: clk = 27 | tangox_get_sysclock() = 200250000 | frequency = 3686400 | Mode = 5 | OC = 0
[90572.350000] Set param..>> Last_rev_msb = 1 || Last_rev_pol = 1
[90572.520000] Sleep for 100 jiffies.
[90573.520000] Got response from 5V setting ..
[90573.520000] Answering: 0xf7 0xae 0x06 0x20 0x96 0x21 0x33 0x24 
[90573.530000] Ans2reset: warm reset needed.
[90573.530000] scard_set_param :: clk = 27 | tangox_get_sysclock() = 200250000 | frequency = 3686400 | Mode = 5 | OC = 0
[90573.550000] Set param..>> Last_rev_msb = 1 || Last_rev_pol = 0
[90573.750000] Sleep for 100 jiffies.
[90574.750000] Got response from 5V setting ..
[90574.750000] Answering: 0x08 0x51 0xf9 0xdf 0x69 0xde 0xcc 0xdb 
[90575.040000] IOCTL_SET_RESET
[90575.040000] scard_set_param :: clk = 27 | tangox_get_sysclock() = 200250000 | frequency = 3686400 | Mode = 0 | OC = 0
[90575.060000] Set param..>> Last_rev_msb = 0 || Last_rev_pol = 0
[90575.240000] Sleep for 100 jiffies.
[90576.240000] Got response from 5V setting ..
[90576.240000] Answering: 0x23 0xe1 0xb7 0xff 0xff 0xd5 0xdc 0x3f 0xff 0x0e 0x70 0xf6 0xff 
[90576.240000] Wrong ts detected 0x23 (need to reverse the polarity and MSB)
[90576.270000] Ans2reset: warm reset needed.
[90576.270000] scard_set_param :: clk = 27 | tangox_get_sysclock() = 200250000 | frequency = 3686400 | Mode = 0 | OC = 0
[90576.280000] Set param..>> Last_rev_msb = 1 || Last_rev_pol = 1
[90576.530000] Sleep for 100 jiffies.
[90577.530000] Got response from 5V setting ..
[90577.530000] Answering: 0x3b 0x78 0x12 0x00 0x00 0x54 0xc4 0x03 0x00 0x8f 0xf1 0x90 0x00 
[90577.530000] Correct ts detected 0x3b
[90577.530000] 
sci0: got response from the scard --> switch to normal
[90577.550000] read :3b                                               ;
[90577.560000] read :78                                               x
[90577.570000] read :12 00 00                                         ...
[90577.580000] read :54 c4 03 00 8f f1 90 00                          T.......
[90577.610000] write :ff 10 12 fd                                      ....
[90577.680000] read :83 12 fd                                         ...
[90578.220000] IOCTL_SET_ATR_READY
[90578.220000] IOCTL_GET_PARAMETERS
[90578.220000] IOCTL_SET_PARAMETERS
[90578.240000] T=0 f=3686400 EGT=0 ETU=186
[90578.390000] IOCTL_GET_PARAMETERS
[90578.390000] IOCTL_SET_PARAMETERS
[90578.390000] T=0 f=3686400 EGT=0 ETU=372
[90578.410000] write :a4 a4 00 00 02                                   .....
[90579.890000] DCW SET: CA[0], DESCR[0], parity[1]
[90579.910000] DCW :dc 2c 03 0b 72 eb a5 02                          .,..r...
[90581.410000] sci0: FIFO empty, go to sleep
[90582.480000] write :a4 c0 00 00 0b                                   .....
[90585.480000] sci0: FIFO empty, go to sleep
[90586.520000] write :80 ff 10 01 05                                   .....
[90589.550000] sci0: FIFO empty, go to sleep
[90589.690000] DCW SET: CA[0], DESCR[0], parity[0]
[90589.700000] DCW :67 db 35 77 d2 5b 5b 88                          g.5w.[[.
[90591.550000] IOCTL_SET_RESET
[90591.550000] scard_set_param :: clk = 27 | tangox_get_sysclock() = 200250000 | frequency = 3686400 | Mode = 1 | OC = 0
[90591.570000] Set param..>> Last_rev_msb = 0 || Last_rev_pol = 0
[90591.730000] Sleep for 100 jiffies.
[90592.730000] Got response from 5V setting ..
[90592.730000] Answering: 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 
[90592.750000] Ans2reset: warm reset needed.
[90592.750000] scard_set_param :: clk = 27 | tangox_get_sysclock() = 200250000 | frequency = 3686400 | Mode = 1 | OC
 = 0
[90592.770000] Set param..>> Last_rev_msb = 0 || Last_rev_pol = 1
[90592.950000] Sleep for 100 jiffies.
[90593.950000] Got response from 5V setting ..
[90593.950000] Answering: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
[90593.970000] Ans2reset: warm reset needed.
[90593.970000] scard_set_param :: clk = 27 | tangox_get_sysclock() = 200250000 | frequency = 3686400 | Mode = 1 | OC = 0
[90593.980000] Set param..>> Last_rev_msb = 1 || Last_rev_pol = 1
[90594.180000] Sleep for 100 jiffies.
[90595.180000] Got response from 5V setting ..
[90595.180000] Answering: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
[90595.210000] Ans2reset: warm reset needed.
[90595.210000] scard_set_param :: clk = 27 | tangox_get_sysclock() = 200250000 | frequency = 3686400 | Mode = 1 | OC = 0
[90595.220000] Set param..>> Last_rev_msb = 1 || Last_rev_pol = 0
[90595.420000] Sleep for 100 jiffies.
[90596.420000] Got response from 5V setting ..
[90596.420000] Answering: 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 
[90596.740000] IOCTL_SET_RESET
[90596.740000] scard_set_param :: clk = 27 | tangox_get_sysclock() = 200250000 | frequency = 3686400 | Mode = 2 | OC = 0
[90596.760000] Set param..>> Last_rev_msb = 0 || Last_rev_pol = 0
[90597.000000] Sleep for 100 jiffies.
[90598.000000] Got response from 5V setting ..
[90598.000000] Answering: 0xe0 0xe0 0xfe 0xff 0xfe 0xfe 0xfe 0xff 0xff 0xff 0xff 0xe1 0xe0 0xff 0xff 0xe0 0xff 0xff 0xe0 0xff 0xe1 0xff 0xfe 0xe0 0xff 
[90598.030000] Ans2reset: warm reset needed.
[90598.030000] scard_set_param :: clk = 27 | tangox_get_sysclock() = 200250000 | frequency = 3686400 | Mode = 2 | OC = 0
[90598.060000] Set param..>> Last_rev_msb = 0 || Last_rev_pol = 1
[90598.300000] Sleep for 100 jiffies.
[90599.300000] Got r
esponse from 5V setting ..
[90599.300000] Answering: 0x1f 0x1f 0x01 0x00 0x01 0x01 0x01 0x00 0x00 0x00 0x00 0x1e 0x1f 0x00 0x00 0x1f 0x00 0x00 0x1f 0x00 0x1e 0x00 0x01 0x1f 0x00 
[90599.320000] Ans2reset: warm reset needed.
[90599.320000] scard_set_param :: clk = 27 | tangox_get_sysclock() = 200250000 | frequency = 3686400 | Mode = 2 | OC = 0
[90599.330000] Set param..>> Last_rev_msb = 1 || Last_rev_pol = 1
[90599.530000] Sleep for 100 jiffies.
[90599.680000] DCW SET: CA[0], DESCR[0], parity[1]
[90599.690000] DCW :5a d2 50 7c 92 97 8b b4                          Z.P|....
[90600.530000] Got response from 5V setting ..
[90600.530000] Answering: 0xf8 0xf8 0x80 0x00 0x80 0x80 0x80 0x00 0x00 0x00 0x00 0x78 0xf8 0x00 0x00 0xf8 0x00 0x00 0xf8 0x00 0x78 0x00 0x80 0xf8 0x00 
[90600.550000] Ans2reset: warm reset needed.
[90600.550000] scard_set_param :: clk = 27 | tangox_get_sysclock() = 200250000 | frequency = 3686400 | Mode = 2 | OC = 0
[90600.560000] Set param..>> Last_rev_msb = 1 || Last_rev_pol = 0
[90600.770000] Sleep for 100 jiffies.
[90601.770000] Got response from 5V setting ..
[90601.770000] Answering: 0x07 0x07 0x7f 0xff 0x7f 0x7f 0x7f 0xff 0xff 0xff 0xff 0x87 0x07 0xff 0xff 0x07 0xff 0xff 0x07 0xff 0x87 0xff 0x7f 0x07 0xff 
[90602.080000] IOCTL_SET_DEACTIVATE
[90603.100000] IOCTL_SET_RESET
[90603.100000] scard_set_param :: clk = 27 | tangox_get_sysclock() = 200250000 | frequency = 3686400 | Mode = 3 | OC = 0
[90603.110000] Set param..>> Last_rev_msb = 0 || Last_rev_pol = 0
[90603.330000] Sleep for 100 jiffies.
[90604.330000] Got response from 5V setting ..
[90604.330000] Answering: 0xff 0xe0 0xff 0xff 
[90604.330000] Ans2reset: warm reset needed.
[90604.340000] scard_set_param :: clk = 27 | tangox_get_sysclock() = 200250000 | frequency = 3686400 | Mode = 3 | OC = 0
[90604.360000] Set param..>> Last_rev_msb = 0 || Last_rev_pol = 1
[90604.570000] Sleep for 100 jiffies.
[90605.570000] Got response from 5V setting ..
[90605.570000] Answering: 0x1f 0x1f 0x01 0x00 0x01 0x01 0x01 0x00 0x00 
0x00 0x00 0x1e 0x1f 0x00 0x00 0x1f 0x00 0x00 0x1f 0x00 0x1e 0x00 0x01 0x1f 0x00 
[90605.600000] Ans2reset: warm reset needed.
[90605.600000] scard_set_param :: clk = 27 | tangox_get_sysclock() = 200250000 | frequency = 3686400 | Mode = 3 | OC = 0
[90605.610000] Set param..>> Last_rev_msb = 1 || Last_rev_pol = 1
[90605.830000] Sleep for 100 jiffies.
[90606.830000] Got response from 5V setting ..
[90606.830000] Answering: 0xf8 0xf8 0x80 0x00 0x80 0x80 0x80 0x00 0x00 0x00 0x00 0x78 0xf8 0x00 0x00 0xf8 0x00 0x00 0xf8 0x00 0x78 0x00 0x80 0xf8 0x00 
[90606.850000] Ans2reset: warm reset needed.
[90606.860000] scard_set_param :: clk = 27 | tangox_get_sysclock() = 200250000 | frequency = 3686400 | Mode = 3 | OC = 0
[90606.870000] Set param..>> Last_rev_msb = 1 || Last_rev_pol = 0
[90607.080000] Sleep for 100 jiffies.
[90608.080000] Got response from 5V setting ..
[90608.080000] Answering: 0xff 0x07 0xff 0xff 
[90608.380000] IOCTL_SET_RESET
[90608.380000] scard_set_param :: clk = 27 | tangox_get_sysclock() = 200250000 | frequency = 3686400 | Mode = 4 | OC = 0
[90608.400000] Set param..>> Last_rev_msb = 0 || Last_rev_pol = 0
[90608.690000] Sleep for 100 jiffies.
[90609.690000] Got response from 5V setting ..
[90609.690000] Answering: 0xff 0xff 0xff 
[90609.690000] Ans2reset: warm reset needed.
[90609.710000] scard_set_param :: clk = 27 | tangox_get_sysclock() = 200250000 | frequency = 3686400 | Mode = 4 | OC = 0
[90609.730000] Set param..>> Last_rev_msb = 0 || Last_rev_pol = 1
[90609.990000] DCW SET: CA[0], DESCR[0], parity[0]
[90609.990000] DCW :75 17 c6 52 1c d7 51 44                          u..R..QD
[90610.110000] Sleep for 100 jiffies.
[90611.120000] Got response from 5V setting ..
[90611.120000] Answering: 0x01 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x01 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x01 0x00 0x01 0x00 0x00 0x00 0x01 0x00 
[90611.140000] Ans2reset: warm reset needed.
[90611.170000] scard_set_param :: clk = 27 | tangox_get_sysclock() = 200250000 | frequency = 3686400 | Mode 
= 4 | OC = 0
[90611.200000] Set param..>> Last_rev_msb = 1 || Last_rev_pol = 1
[90611.470000] Sleep for 100 jiffies.
[90612.470000] Got response from 5V setting ..
[90612.470000] Answering: 0x80 0x80 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x80 0x80 0x80 0x00 0x00 0x80 0x00 0x00 0x80 0x00 0x80 0x00 0x00 0x00 0x80 0x00 
[90612.500000] Ans2reset: warm reset needed.
[90612.500000] scard_set_param :: clk = 27 | tangox_get_sysclock() = 200250000 | frequency = 3686400 | Mode = 4 | OC = 0
[90612.530000] Set param..>> Last_rev_msb = 1 || Last_rev_pol = 0
[90612.720000] Sleep for 100 jiffies.
[90613.720000] Got response from 5V setting ..
[90613.720000] Answering: 0xff 0xff 0xff 
[90614.020000] IOCTL_SET_DEACTIVATE
[90615.040000] IOCTL_SET_RESET
[90615.040000] scard_set_param :: clk = 27 | tangox_get_sysclock() = 200250000 | frequency = 3686400 | Mode = 5 | OC = 0
[90615.050000] Set param..>> Last_rev_msb = 0 || Last_rev_pol = 0
[90615.240000] Sleep for 100 jiffies.
[90616.240000] Got response from 5V setting ..
[90616.240000] Answering: 0x10 0x8a 0x9f 0xfb 0x96 0x7b 0x33 0xdb 
[90616.250000] Ans2reset: warm reset needed.
[90616.260000] scard_set_param :: clk = 27 | tangox_get_sysclock() = 200250000 | frequency = 3686400 | Mode = 5 | OC = 0
[90616.280000] Set param..>> Last_rev_msb = 0 || Last_rev_pol = 1
[90616.450000] Sleep for 100 jiffies.
[90617.450000] Got response from 5V setting ..
[90617.450000] Answering: 0xef 0x75 0x60 0x04 0x69 0x84 0xcc 0x24 
[90617.460000] Ans2reset: warm reset needed.
[90617.460000] scard_set_param :: clk = 27 | tangox_get_sysclock() = 200250000 | frequency = 3686400 | Mode = 5 | OC = 0
[90617.480000] Set param..>> Last_rev_msb = 1 || Last_rev_pol = 1
[90617.660000] Sleep for 100 jiffies.
[90618.660000] Got response from 5V setting ..
[90618.660000] Answering: 0xf7 0xae 0x06 0x20 0x96 0x21 0x33 0x24 
[90618.680000] Ans2reset: warm reset needed.
[90618.680000] scard_set_param :: clk = 27 | tangox_get_sysclock() = 200250000 | frequency = 3686400 | Mode = 5 |
 OC = 0
[90618.690000] Set param..>> Last_rev_msb = 1 || Last_rev_pol = 0
[90618.890000] Sleep for 100 jiffies.
[90619.670000] DCW SET: CA[0], DESCR[0], parity[1]
[90619.670000] DCW :d2 95 4c b3 e4 14 f3 eb                          ..L.....
[90619.890000] Got response from 5V setting ..
[90619.890000] Answering: 0x08 0x51 0xf9 0xdf 0x69 0xde 0xcc 0xdb 
[90620.190000] IOCTL_SET_RESET
[90620.190000] scard_set_param :: clk = 27 | tangox_get_sysclock() = 200250000 | frequency = 3686400 | Mode = 0 | OC = 0
[90620.200000] Set param..>> Last_rev_msb = 0 || Last_rev_pol = 0
[90620.390000] Sleep for 100 jiffies.
[90621.390000] Got response from 5V setting ..
[90621.390000] Answering: 0x23 0xe1 0xb7 0xff 0xff 0xd5 0xdc 0x3f 0xff 0x0e 0x70 0xf6 0xff 
[90621.390000] Wrong ts detected 0x23 (need to reverse the polarity and MSB)
[90621.420000] Ans2reset: warm reset needed.
[90621.420000] scard_set_param :: clk = 27 | tangox_get_sysclock() = 200250000 | frequency = 3686400 | Mode = 0 | OC = 0
[90621.430000] Set param..>> Last_rev_msb = 1 || Last_rev_pol = 1
[90621.640000] Sleep for 100 jiffies.
[90622.640000] Got response from 5V setting ..
[90622.640000] Answering: 0x3b 0x78 0x12 0x00 0x00 0x54 0xc4 0x03 0x00 0x8f 0xf1 0x90 0x00 
[90622.640000] Correct ts detected 0x3b
[90622.640000] sci0: got response from the scard --> switch to normal
[90622.660000] read :3b                                               ;
[90622.670000] read :78                                               x
[90622.680000] read :12 00 00                                         ...
[90622.690000] read :54 c4 03 00 8f f1 90 00                          T.......
[90622.720000] write :ff 10 12 fd                                      ....
[90622.790000] read :83 12 fd                                         ...
[90623.320000] IOCTL_SET_ATR_READY
[90623.320000] IOCTL_GET_PARAMETERS
[90623.320000] IOCTL_SET_PARAMETERS
[90623.350000] T=0 f=3686400 EGT=0 ETU=186
[90623.490000] IOCTL_GET_PARAMETERS
[90623.490000] IOCTL_SET_PARAMETERS


[90623.490000] T=0 f=3686400 EGT=0 ETU=372
[90623.520000] write :a4 a4 00 00 02                                   .....
root@azboxhd:~# [6n

[gchevalier]

root@azboxhd:~# dmesg[J

no, celkom to nevyšlo ale nevadí,

otázka je či vidí systém pripojený disk ako /dev/sda alebo /dev/sdb .... môže to ovplyvňovať aj pripojené usb-éčko

takto to vyzerá po príkaze "ls /dev"

Kód: Vybrat vše

root@box:~# ls /dev
aenc0               mmcblk0             sci0                tty28               tty58
autofs              mmcblk0boot0        sda                 tty29               tty59
ble                 mmcblk0boot1        sda1                tty3                tty6
block               mmcblk0p1           sda2                tty30               tty60

z čoho vidno že pripojený disk je sda a má partície sda1 a sda2 a toto treba skontrolovať na azboxe

[peter54]

Najkrajšie to ukáže prikaz lsblk.
Ten treba pred prvým použitím doinštalovať príkazom
opkg install util-linux-lsblk

[JohnCenaWWE.]

skusil som

[JohnCenaWWE.]

po dlhsej dobe som skusil este raz cez menu/system/pevny disk ho inicializovat a podarilo sa ,uz ho vidi system aj GSU,a da sa nahravat na ten SSD 120Gb ,super ,mountnul som ho v etc/fstab
/dev/hdb1 /media/hdd auto defaults 0 0